Unable to Edit Snapshots for a Database

A new problem. I navigate to the Edit Settings page in the Automatic Workload Repository option (10.2.0.5 OEMGC on Solaris Sparc with 10.1.0.4 database for repository and 10.2.0.5 OMAs). I only have 25 databases or so and have set up saved AWRs (i.e., snapshots) on many of them. When I attemp to "Edit Settings" for saving AWRs on the repository database, I get an Error page in the console with the message "Internal Error has occured. Check the log file for details.". This happens when I click on the "Show SQL" button as well as the "OK" button.
I've been looking through the emoms.trc and emoms.log in the $OMS_HOME/sysman/log directory and finding nothing of substance. There is nothing in the $AGENT_HOME/sysman/log files as well.
The error seems like a configuration problem--the error returns quickly. I checked DBA_HIST_WR_CONTROL and confirmed that no snapshots are getting saved.
Any ideas?

Hi Muthu,
Thank-you for the response.
Yes we have posted a confirmation again to get the process moving, as i knew that missing entries in the field caused the error.
But what I would like to know is why isn't it possible to delete or change this confirmation to correct the wrong entries responsible fo the error.
Why all the buttons are greyed out, though nothing is posted at backend
Edited by: Vaishav on Sep 20, 2010 12:22 PM

Similar Messages

Unable to edit metadata for some files, Bridge CS6

I am editing metadata for .wav files, and somehow a few of them have become locked for editing. I have checked the properties for these files and still have full permissions for all users.
As you can see in the screen capture below, the pencil icons you click to edit the metadata are gone and an error message comes up. Thanks for any help you can give!

Wow, I just answered my own question...
After an hour trying to figure this out, I decided to just go ahead and edit the images, but "Edit in Camera Raw" was not an option. So, I went to Tools \ Cache \ Purge Cache for Folder "xxx"
Problem solved.

Unable to edit Confirmation for a limit PO.

Hi,
This is related to Confirmation in SRM 5.00 for a limit PO.
The status of this confirmation is "ERROR IN PROCESS". I've seen that there is error while posting the SES to backend.
This is because of missing some field entries while posting confirmation, Now I want to change the confirmation and make corrections, but i find that all the buttons ( change, delete......) are inactive/greyed out.
Is it not possible to change a limit confirmation once saved and approved. Then how do i delete it, if all the options are greyed out.
Please help me

Hi Muthu,
Thank-you for the response.
Yes we have posted a confirmation again to get the process moving, as i knew that missing entries in the field caused the error.
But what I would like to know is why isn't it possible to delete or change this confirmation to correct the wrong entries responsible fo the error.
Why all the buttons are greyed out, though nothing is posted at backend
Edited by: Vaishav on Sep 20, 2010 12:22 PM

Unable to Edit Dashboards for Weblogic admin

HI,
I just installed and configured OBIEE 11.1.1.6.9 and OBIA 7.9.6.4
I was trying to edit Dashboard but when i click page Options (small icon top right handside) i did found 'Edit Dashboard' further when to catalog and tried to edit Analysis & prompt a message appeared 'Access Denied'. as it shows its a privileges issues for user. But while installation i created one user 'weblogic' and this user is having all privileges i checked in console & em. so my question is how i can edit these analysis or how i can fix this issue.
OBIEE version: 11.1.1.6.9
OBIA: 7.9.6.4
OBIEE & OBIA O.S: windows 2008 server SP2
Regards
Sher ullah baig

1.Stop the Presentation Server.
2.Backup the instanceconfig.xml file at [middleware_home]/instances/instance1/config/OracleBIPresentationServicesComponent/coreapplication_obips1/instanceconfig.xml
3.Under the 'Catalog' section, add the 'Recover' tag. For Example:
<Catalog>
<UpgradeAndExit>false</UpgradeAndExit>
<UpdateAccountGUIDs>Recover</UpdateAccountGUIDs>
</Catalog>
4.Start the Presentation Server. It will perform a recovery and then after some time shutdown.
5.Remove the tag.
6.Start the Presentation Server again
Hope this helps. Let us know if you still have issues.
Thanks,
SVS

Unable to Edit Imported Jpeg files.

I'm currently using iPhoto 9.6 and OS 10.10. I have created jpg stills from .mov projects using QT Pro and imported them successfully into a previous version of iPhoto where I was able to crop them and make rudimentary color and exposure adjustments. With the new iPhoto 9.6 I cannot. I get an error message "Image Cannot Be Edited. The original format is not supported."
So I am assuming the only way to edit these imported jpegs is to open them in Lightroom or Photoshop make my adjustments and then attempt to re-import them into iPhoto or maybe just stop using iPhoto all together for this kind of file?

Yes "master" copies of files - those located in the iPhoto >>package contents >> Masters folder organized by import date - once they have been edited from within iPhoto (exposure corrections, cropping, straightening, etc) become the master copies.
Bewilderingly vague. They are the masters. They are never edited. The photos are edited and the results recorded in the SQL database. The never "become the Master copies". They are the Masters and never become anything.
To prove this I have selected a master file from with this directory and created a copy of it on the desktop where I gave it a new name, then re-imported it to iPhoto and re-opened it there. It is a virtual clone of the original edited file - edited from within iPhoto save for its name - an "edited master".
If you made a copy of a Master then it's not a virtual clone it's an actual clone. "It is a virtual clone of the original edited file" Huh? What's an "original edited file"? It's a Master or something else? Which is it? There is no concept in iPhoto of 'edited Master'. There are Masters. That's the file as imported from your camera. It is never edited. End of story.
Subsequently from within iPhoto I have chosen the original photo - the one that had been modified to begin with - and reverted this file to its original version. So then I had two masters of the same shot - one edited and one in its originally imported state. Why did I do this (and originate this post)?
No you didn't. You had two masters to begin with and thereafter you had two masters at the end. When you reverted to original all you did was delete the edit decisions for the database and destroy a preview. In no case was the Master touched.
The terminology is important because it explains how the app works. You're conflating photos (which are edited in iPhoto) with files (which are never edited in iPhoto), all photo edits are virtual until baked in on export. That's why the concept and the term Master is important. Edited Master means nothing, Master of an Edited Photo does, but that's a different thing.
Because I could not re-edit or export these affected photos unless I first re-imported them to iPhoto by either locating the original files from storage media or making copies of them from iPhoto's package contents>>masters folder as above and importing them back into the iPhoto library. Once I did this - there were a lot of these affected files - I could edit and export to my heart's content. Remember, these files were modified from within earlier versions iPhoto itself. Yes, some files had been converted to jpegs from original PICT exports out QT Pro using Photoshop Elements.
Because your database was corrupted. It has nothing to do with Masters/Versions or anything else. It was broken.
How do I explain this apparent corruption of the iPhoto library database? Disclaimers to the contrary, I put the onus on having to convert the db every time there is an app iteration which is sometimes coupled with an OS upgrade (like with Yosemite). I suspect that the file metadata is susceptible to corruption during these upgrades. It is the only variable in an otherwise static and stable environment that could possibly result in library corruption short of hardware failure.
That's one possibility. Here are some more: anytime the app is interrupted writing to the database - by a crash, hang or even a power surge, bad blocks on a disk - there are many possibilities..
And again, there is no need to convert the db "every time there is an app iteration". There are updates when it is not necessary. And, as I keep on saying, OS upgrades make no difference. It's app upgrades only.

Running a oracle script for multible database on same server

Hello friends
I am thinking of creating a script in HP UX which will run a SQL script on multiple oracle in same server. I can do this for one oracle but i'm unable to do it for multiple database.
I need to do newid oraSID user every time for diff. database .. can u suggest something..
regards
Ashish

Hi Markus,
Its not working .. When i run this script from my ID, it says SQLPLUS not found. see this .. i have created 1 sql file and 1 script file to call it with exporting ORACLE_HOME & ORACE_SID for one of the system E40.
Can you suggest something ..
er3asu82:(/tmp)(xchason)#ll /tmp/testsql.sql /tmp/testscr.dat
-rwxrwxrwx 1 xchason dba 109 Aug 9 11:10 /tmp/testscr.dat
-rwxrwxrwx 1 xchason dba 32 Aug 9 11:08 /tmp/testsql.sql
er3asu82:(/tmp)(xchason)#cat /tmp/testsql.sql
select * from v$instance;
quit
er3asu82:(/tmp)(xchason)#cat /tmp/testscr.dat
#! /bin/ksh
export ORACLE_HOME=/oracle/E40/102_64
export ORACE_SID=E40
sqlplus "/as sysdba" @testsql.sql
er3asu82:(/tmp)(xchason)#/tmp/testscr.dat
/tmp/testscr.dat[5]: sqlplus: not found
Again when i try to run this from other orasid, it does not work as well..
er3asu82:oraq52 1> /tmp/testscr.dat
Error 6 initializing SQL*Plus
Message file sp1<lang>.msb not found
SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory
thanks
ashish

Sample Response File for Oracle Database 12c Standard Edition on Oracle Linux 6.4 -- working

oracle@styles-and-artists-development-oracle database]$ cat response/db_install.rsp
## Copyright(c) Oracle Corporation 1998,2013. All rights reserved.##
## Specify values for the variables listed below to customize     ##
## your installation.                                             ##
## Each variable is associated with a comment. The comment        ##
## can help to populate the variables with the appropriate        ##
## values.                                                        ##
## IMPORTANT NOTE: This file contains plain text passwords and    ##
## should be secured to have read permission only by oracle user ##
## or db administrator who owns this installation.                ##
# Do not change the following system generated value.
oracle.install.responseFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v12.1.0
# Specify the installation option.
# It can be one of the following:
#   - INSTALL_DB_SWONLY
#   - INSTALL_DB_AND_CONFIG
#   - UPGRADE_DB
oracle.install.option=INSTALL_DB_AND_CONFIG
# Specify the hostname of the system as set during the install. It can be used
# to force the installation to use an alternative hostname rather than using the
# first hostname found on the system. (e.g., for systems with multiple hostnames
# and network interfaces)
ORACLE_HOSTNAME=styles-and-artists-development-oracle
# Specify the Unix group to be set for the inventory directory.
UNIX_GROUP_NAME=oracle
# Specify the location which holds the inventory files.
# This is an optional parameter if installing on
# Windows based Operating System.
INVENTORY_LOCATION=/home/oracle/oracleInventory
# Specify the languages in which the components will be installed.
# en   : English                  ja   : Japanese
# fr   : French                   ko   : Korean
# ar   : Arabic                   es   : Latin American Spanish
# bn   : Bengali                  lv   : Latvian
# pt_BR: Brazilian Portuguese     lt   : Lithuanian
# bg   : Bulgarian                ms   : Malay
# fr_CA: Canadian French          es_MX: Mexican Spanish
# ca   : Catalan                  no   : Norwegian
# hr   : Croatian                 pl   : Polish
# cs   : Czech                    pt   : Portuguese
# da   : Danish                   ro   : Romanian
# nl   : Dutch                    ru   : Russian
# ar_EG: Egyptian                 zh_CN: Simplified Chinese
# en_GB: English (Great Britain) sk   : Slovak
# et   : Estonian                 sl   : Slovenian
# fi   : Finnish                  es_ES: Spanish
# de   : German                   sv   : Swedish
# el   : Greek                    th   : Thai
# iw   : Hebrew                   zh_TW: Traditional Chinese
# hu   : Hungarian                tr   : Turkish
# is   : Icelandic                uk   : Ukrainian
# in   : Indonesian               vi   : Vietnamese
# it   : Italian
# all_langs   : All languages
# Specify value as the following to select any of the languages.
# Example : SELECTED_LANGUAGES=en,fr,ja
# Specify value as the following to select all the languages.
# Example : SELECTED_LANGUAGES=all_langs
SELECTED_LANGUAGES=en
# Specify the complete path of the Oracle Home.
ORACLE_HOME=/extended2/oracleBase/db12c1
# Specify the complete path of the Oracle Base.
ORACLE_BASE=/extended2/oracleBase
# Specify the installation edition of the component.
# The value should contain only one of these choices.
#   - EE     : Enterprise Edition
#   - SE     : Standard Edition
#   - SEONE : Standard Edition One
#   - PE     : Personal Edition (WINDOWS ONLY)
oracle.install.db.InstallEdition=SE
# PRIVILEGED OPERATING SYSTEM GROUPS                                          #
# Provide values for the OS groups to which OSDBA and OSOPER privileges       #
# needs to be granted. If the install is being performed as a member of the   #
# group "dba", then that will be used unless specified otherwise below.       #
# The value to be specified for OSDBA and OSOPER group is only for UNIX based #
# Operating System.                                                           #
# The DBA_GROUP is the OS group which is to be granted OSDBA privileges.
oracle.install.db.DBA_GROUP=osdba
# The OPER_GROUP is the OS group which is to be granted OSOPER privileges.
# The value to be specified for OSOPER group is optional.
oracle.install.db.OPER_GROUP=osoper
# The BACKUPDBA_GROUP is the OS group which is to be granted OSBACKUPDBA privileges.
oracle.install.db.BACKUPDBA_GROUP=bckdba
# The DGDBA_GROUP is the OS group which is to be granted OSDGDBA privileges.
oracle.install.db.DGDBA_GROUP=dbdba
# The KMDBA_GROUP is the OS group which is to be granted OSKMDBA privileges.
oracle.install.db.KMDBA_GROUP=kmdba
#                               Grid Options                                  #
# Specify the type of Real Application Cluster Database
#   - ADMIN_MANAGED: Admin-Managed
#   - POLICY_MANAGED: Policy-Managed
# If left unspecified, default will be ADMIN_MANAGED
oracle.install.db.rac.configurationType=
# Value is required only if RAC database type is ADMIN_MANAGED
# Specify the cluster node names selected during the installation.
# Leaving it blank will result in install on local server only (Single Instance)
# Example : oracle.install.db.CLUSTER_NODES=node1,node2
oracle.install.db.CLUSTER_NODES=
# This variable is used to enable or disable RAC One Node install.
#   - true : Value of RAC One Node service name is used.
#   - false : Value of RAC One Node service name is not used.
# If left blank, it will be assumed to be false.
oracle.install.db.isRACOneInstall=
# Value is required only if oracle.install.db.isRACOneInstall is true.
# Specify the name for RAC One Node Service
oracle.install.db.racOneServiceName=
# Value is required only if RAC database type is POLICY_MANAGED
# Specify a name for the new Server pool that will be configured
# Example : oracle.install.db.rac.serverpoolName=pool1
oracle.install.db.rac.serverpoolName=
# Value is required only if RAC database type is POLICY_MANAGED
# Specify a number as cardinality for the new Server pool that will be configured
# Example : oracle.install.db.rac.serverpoolCardinality=2
oracle.install.db.rac.serverpoolCardinality=
#                        Database Configuration Options                       #
# Specify the type of database to create.
# It can be one of the following:
#   - GENERAL_PURPOSE/TRANSACTION_PROCESSING
#   - DATA_WAREHOUSE
oracle.install.db.config.starterdb.type=GENERAL_PURPOSE
# Specify the Starter Database Global Database Name.
oracle.install.db.config.starterdb.globalDBName=cbd
# Specify the Starter Database SID.
oracle.install.db.config.starterdb.SID=cdb1
# Specify whether the database should be configured as a Container database.
oracle.install.db.ConfigureAsContainerDB=true
# Specify the Pluggable Database name for the pluggable database in Container Database.
oracle.install.db.config.PDBName=pdb1
# Specify the Starter Database character set.
# One of the following
# AL32UTF8, WE8ISO8859P15, WE8MSWIN1252, EE8ISO8859P2,
# EE8MSWIN1250, NE8ISO8859P10, NEE8ISO8859P4, BLT8MSWIN1257,
# BLT8ISO8859P13, CL8ISO8859P5, CL8MSWIN1251, AR8ISO8859P6,
# AR8MSWIN1256, EL8ISO8859P7, EL8MSWIN1253, IW8ISO8859P8,
# IW8MSWIN1255, JA16EUC, JA16EUCTILDE, JA16SJIS, JA16SJISTILDE,
# KO16MSWIN949, ZHS16GBK, TH8TISASCII, ZHT32EUC, ZHT16MSWIN950,
# ZHT16HKSCS, WE8ISO8859P9, TR8MSWIN1254, VN8MSWIN1258
oracle.install.db.config.starterdb.characterSet=AL32UTF8
# This variable should be set to true if Automatic Memory Management
# in Database is desired.
# If Automatic Memory Management is not desired, and memory allocation
# is to be done manually, then set it to false.
oracle.install.db.config.starterdb.memoryOption=true
# Specify the total memory allocation for the database. Value(in MB) should be
# at least 256 MB, and should not exceed the total physical memory available
# on the system.
# Example: oracle.install.db.config.starterdb.memoryLimit=512
oracle.install.db.config.starterdb.memoryLimit=512
# This variable controls whether to load Example Schemas onto
# the starter database or not.
oracle.install.db.config.starterdb.installExampleSchemas=true
# Passwords can be supplied for the following four schemas in the             #
# starter database:                                                           #
#   SYS                                                                       #
#   SYSTEM                                                                    #
#   DBSNMP (used by Enterprise Manager)                                       #
# Same password can be used for all accounts (not recommended)                #
# or different passwords for each account can be provided (recommended)       #
# This variable holds the password that is to be used for all schemas in the
# starter database.
oracle.install.db.config.starterdb.password.ALL=CDBadmin12345#
# Specify the SYS password for the starter database.
oracle.install.db.config.starterdb.password.SYS=CBDsys12345#
# Specify the SYSTEM password for the starter database.
oracle.install.db.config.starterdb.password.SYSTEM=PDBsys12345#
# Specify the DBSNMP password for the starter database.
oracle.install.db.config.starterdb.password.DBSNMP=DBsnmp12345#
# Specify the PDBADMIN password required for creation of Pluggable Database in the Container Database.
oracle.install.db.config.starterdb.password.PDBADMIN=PDBadmin12345#
# Specify the management option to use for managing the database.
# Options are:
# 1. CLOUD_CONTROL - If you want to manage your database with Enterprise Manager Cloud Control along with Database Express.
# 2. DEFAULT   -If you want to manage your database using the default Database Express option.
oracle.install.db.config.starterdb.managementOption=DEFAULT
# Specify the OMS host to connect to Cloud Control.
# Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL
oracle.install.db.config.starterdb.omsHost=
# Specify the OMS port to connect to Cloud Control.
# Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL
oracle.install.db.config.starterdb.omsPort=
# Specify the EM Admin user name to use to connect to Cloud Control.
# Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL
oracle.install.db.config.starterdb.emAdminUser=
# Specify the EM Admin password to use to connect to Cloud Control.
# Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL
oracle.install.db.config.starterdb.emAdminPassword=
# SPECIFY RECOVERY OPTIONS                                                    #
# Recovery options for the database can be mentioned using the entries below #
# This variable is to be set to false if database recovery is not required. Else
# this can be set to true.
oracle.install.db.config.starterdb.enableRecovery=true
# Specify the type of storage to use for the database.
# It can be one of the following:
#   - FILE_SYSTEM_STORAGE
#   - ASM_STORAGE
oracle.install.db.config.starterdb.storageType=FILE_SYSTEM_STORAGE
# Specify the database file location which is a directory for datafiles, control
# files, redo logs.
# Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE
oracle.install.db.config.starterdb.fileSystemStorage.dataLocation=/extended1/db/data
# Specify the recovery location.
# Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE
oracle.install.db.config.starterdb.fileSystemStorage.recoveryLocation=/extended1/db/recovery
# Specify the existing ASM disk groups to be used for storage.
# Applicable only when oracle.install.db.config.starterdb.storageType=ASM_STORAGE
oracle.install.db.config.asm.diskGroup=/dev/oracleasm
# Specify the password for ASMSNMP user of the ASM instance.
# Applicable only when oracle.install.db.config.starterdb.storage=ASM_STORAGE
oracle.install.db.config.asm.ASMSNMPPassword=ASMsnmp122345#
# Specify the My Oracle Support Account Username.
# Example   : [email protected]
MYORACLESUPPORT_USERNAME=
# Specify the My Oracle Support Account Username password.
# Example    : MYORACLESUPPORT_PASSWORD=password
MYORACLESUPPORT_PASSWORD=
# Specify whether to enable the user to set the password for
# My Oracle Support credentials. The value can be either true or false.
# If left blank it will be assumed to be false.
# Example    : SECURITY_UPDATES_VIA_MYORACLESUPPORT=true
SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
# Specify whether user doesn't want to configure Security Updates.
# The value for this variable should be true if you don't want to configure
# Security Updates, false otherwise.
# The value can be either true or false. If left blank it will be assumed
# to be false.
# Example    : DECLINE_SECURITY_UPDATES=false
DECLINE_SECURITY_UPDATES=flase
# Specify the Proxy server name. Length should be greater than zero.
# Example    : PROXY_HOST=proxy.domain.com
PROXY_HOST=
# Specify the proxy port number. Should be Numeric and atleast 2 chars.
# Example    : PROXY_PORT=25
PROXY_PORT=
# Specify the proxy user name. Leave PROXY_USER and PROXY_PWD
# blank if your proxy server requires no authentication.
# Example    : PROXY_USER=username
PROXY_USER=
# Specify the proxy password. Leave PROXY_USER and PROXY_PWD
# blank if your proxy server requires no authentication.
# Example    : PROXY_PWD=password
PROXY_PWD=
# Specify the proxy realm.
# Example    : PROXY_REALM=metalink
PROXY_REALM=
# Specify the Oracle Support Hub URL.
# Example    : COLLECTOR_SUPPORTHUB_URL=https://orasupporthub.company.com:8080/
COLLECTOR_SUPPORTHUB_URL=
# Specify the auto-updates option. It can be one of the following:
#   - MYORACLESUPPORT_DOWNLOAD
#   - OFFLINE_UPDATES
#   - SKIP_UPDATES
oracle.installer.autoupdates.option=SKIP_UPDATES
# In case MYORACLESUPPORT_DOWNLOAD option is chosen, specify the location where
# the updates are to be downloaded.
# In case OFFLINE_UPDATES option is chosen, specify the location where the updates
# are present.
oracle.installer.autoupdates.downloadUpdatesLoc=
# Specify the My Oracle Support Account Username which has the patches download privileges
# to be used for software updates.
# Example   : [email protected]
AUTOUPDATES_MYORACLESUPPORT_USERNAME=
# Specify the My Oracle Support Account Username password which has the patches download privileges
# to be used for software updates.
# Example    : AUTOUPDATES_MYORACLESUPPORT_PASSWORD=password
AUTOUPDATES_MYORACLESUPPORT_PASSWORD=

This is the simplest installation you can get, but if you want to do a fast response file based installation, there it is.

Unable to connect to my Oracle Database with Microsoft's ODBC for Oracle driver

I am unable to connect to my Oracle Database with Microsoft's ODBC for Oracle driver vers.2.573.4202.00 on a Win98 computer.
First, I create a "Net Service Name" in order for the ODBC Driver to find the Oracle server. I then created a System DSN in the ODBC Data Source Administrator and assigned the "Net Server Name" as the server in the "Microsoft ODBC for Oracle Setup". But when I test this DSN with Oracle's provided "Oracle ODBC 32Bit Test vers.2.5.3.1.0" I get an error:
SQLSTATE: NA000
Native Error Code:0
Driver Message:[Microsoft][ODBC driver for Oracle][Oracle]
This error occurred on all three Win98 computers I have tried. It does however, seem to work fine on WinNT 4.0, and believe it or not, on the two Win95 computers I have tried.
Does anyone have any fixes, recomendations, or advice?
Thank you,
Eric Edwards
null

Why are yu not using the Oracle ODBC driver - these can be downloaded from OTN.
Have you set up a tnsnames.ora entry for the Oracle database you want to connect to? Does this name have a domain name added to it? Check %ORACLE_HOME%\network\admin\tnsnames.ora for the service name. If it is a name of the form :
name.domain.subdomain
then you should try using this full name when configuring the ODBC data source.
null

Oracle Database Express Edition 11g for 64bit Windows

Hi Folks
Is it ok to install Oracle Database Express Edition 11g for 32bit windows on a 64 bit Windows 7 (Ultimate Edition) machine? I am not able to fiind a 64 bit Oracle Database Express Edition 11g, only standard edition. Hope someone can advise. Thanks.
regards
John

Hi HuaMin Chen ,
Thanks for the quick reply. I am not sure if I am reading you correctly. You are saying there it's fine to install the 32bit 11g express edition on a 64bit machine?
regards
John

Unable to edit default permission for Screen capturing of BB 8800 curve after downgrade OS to 4.3

i have downgrade my BB 8800 device OS to 4.3 , and its OS version is v4.3.1.27 (Platform 2.7.0.30) Cryptographic kernel v3.8.5.30 , So exact problem is like that now i am unable to edit the default permission for Screen Capturing properties of device, it shown the only option "Deny" and dont allow to me change it . For that i go to - Option->Security Options->Application Permissions->option button->Edit Default permissions->Interaction->Screen Capturing and it show only option "Deny" - So please suggest a solution

Greetings, welcome to the Forums.
There's lots of detail you left out...
There is no OS 4.3 for the 8800 model. So, what model BlackBerry do you have, found at Options > About?
What is your Operating System loaded to your device? Look at Options > About, third line down beginning with a "v.5.0.x.xxx", What is yours?
What screencapture application are you using?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

10g: Database Diagram "Unable to Locate Elements For ..."

Hello,
In experimenting with JDeveloper 10g Diagram feature (IDE version 9.0.5.13.88), I experienced a rather vexing problem. I wondered if anyone could shed some light onto the issue for me and perhaps even help get it corrected.
I started off by Upgrading/Converting an existing 9.0.3 project up to 9.0.5. I then created a new Database Diagram (File | New..., General -> Diagrams -> Database Diagram). I then dragged 1 unconstrained view and 2 constrained views onto the diagram. It automatically drew the view links. I arranged the views on the diagram and then closed JDeveloper. I then closed the diagram and the workspace. When I attempted to reopen the diagram, I received the following error:
Unable to Locate Elements for Adhoc Reporting Model
In the list were the 3 views and associated viewlinks. Pressing continue yielded a blank diagram, much to my chagrin.
Any ideas?
Thanks,
Sean

When you mention views, I presume that you mean View Objects, if this correct. I also presume that you dragged and dropped these View Objects from the navigator, and that the View Link that you mention was already visible in the navigator, is this also correct?
Did you see your view objects in the navigator, when you re-opened JDev? Are they in the same project, as your diagram? The diagrammer should have been able to find the objects, if they are visible in your current project.
You state that you first shutdown JDeveloper, and then closed your diagram, and workspace, did your diagram re-appear as expected when you opened up JDeveloper, and it was only after closing the diagram, and workspace, and then re-opening the workspace and diagram that you ran into problems?
Did you save everything, before you shutdown JDeveloper?
There is no known bug on this, so it would be good to get very specific test steps for this, to enable us to log a bug. Incidentally, why did you chose to create a Database diagram, rather than a Business Components Diagram?

Any Oracle database personal edition certified for Windows 7/32bit?

Is any Oracle database Personal edition certified for Windows 7/32bit? I spent an hour at least searching for this but no chance.
Thank you.

Currently, only 11gR2 and 10.2.0.5 are certified on Win 7 Professional or higher - Home versions are not supported.
HTH
Srini

I am unable to edit pdf documents I have created or that others have sent me for review.

I am unable to edit a pdf document I have created or edit others sent to me for review. How do I do this with my current subscription?

"... my version of pdf ..."
PDF is the file format/technology described and defined by/in the ISO Standard ISO 32000.
As PDF is not a software application there is, of course, no application related "tools" (e.g., Typewriter, etc.).
Again, it comes down to what exactly you have subsribed to.
Upon subscription to any of Adobe's subscription services you do get an email from Adobe that declaritively states what you've subscribed to.
Let us know what it says eh.
Be well...

How to find a datasheet for Oracle Database Enterprise Edition

Hi all
Can you please send me a link where to find datasheet for Oracle Database Enterprise Edition, because when i navigate on www.oracle.com or www.otn.oracle.com or partners.oracle.com the only product which I can not find the Brochures and Datasheets link is ODBEE.
If it is possible you can send me even the pdf document.
Thank you and best regards

Can you explain exactly what information you're looking for? There are many, many different things that could be called "data sheets". What information, specifically, are you trying to find about the enterprise edition database?
Potentially, you are looking for the Oracle Database 11g Product Family which compares the features available in the various editions of the 11g database. Perhaps you want some other data sheet. If you can help us by telling us exactly what information you're trying to find, we can probably help you find it.
Justin

Error: 1056603 Unable to spawn process for application [AppName]

Hi,
After a fresh installation of Essbase Server (11.1.1.4), I'm experiencing the following error when attempting to perform basically any action on any Application (Start, Stop, Delete) through EAS:
*Error: 1056603 Unable to spawn process for application [Demo]. Please ensure that adequate memory is available.*
System memory seems abundant at around 5% usage with all relevant services started, but I even doubled it (since it's a VM) to 16Gb just to make sure, the issue persists.
Having a look at the Essbase server log, I didn't find any additional info that could be helpful:
[Thu Oct 11 15:07:03 2012]Local/ESSBASE0///2412/Info(1051160)
Received Validate Login Session request
[Thu Oct 11 15:07:03 2012]Local/ESSBASE0///2380/Info(1051001)
Received client request: Get App and Database Status (from user [admin])
[Thu Oct 11 15:07:03 2012]Local/ESSBASE0///568/Info(1051001)
Received client request: MaxL: Execute (from user [admin])
[Thu Oct 11 15:07:03 2012]Local/ESSBASE0///568/Error(1056603)
Unable to spawn process for application [Demo]. Please ensure that adequate memory is available.
[Thu Oct 11 15:07:03 2012]Local/ESSBASE0///568/Error(1054001)
Cannot load application Demo with error number [1056603] - see server log file
[Thu Oct 11 15:07:03 2012]Local/ESSBASE0///568/Warning(1051003)
Error 1054001 processing request [MaxL: Execute] - disconnecting
And when the Essbase service is started, essbase.log also seems to be pretty normal:
[Thu Oct 11 15:18:13 2012]Local/ESSBASE0///2376/Info(1051001)
Received client request: Logout (from user [admin])
[Thu Oct 11 15:18:13 2012]Local/ESSBASE0///2376/Info(1051037)
Logging out user [admin], active for 29 minutes
[Thu Oct 11 15:18:19 2012]Local/ESSBASE0///1236/Info(1051243)
Exclusive operation security file compaction started. This may take a while
[Thu Oct 11 15:18:19 2012]Local/ESSBASE0///1236/Info(1051244)
Security file compaction completed
[Thu Oct 11 15:18:19 2012]Local/ESSBASE0///1236/Info(1051052)
Essbase Server - finished
[Thu Oct 11 15:18:23 2012]Local/ESSBASE0///2620/Info(1051283)
Retrieving License Information Please Wait...
[Thu Oct 11 15:18:23 2012]Local/ESSBASE0///2620/Info(1051286)
License information retrieved.
[Thu Oct 11 15:18:29 2012]Local/ESSBASE0///2620/Info(1051199)
Single Sign-On Initialization Succeeded !
[Thu Oct 11 15:18:29 2012]Local/ESSBASE0///2620/Info(1051232)
Using English_UnitedStates.Latin1@Binary as the Essbase Locale
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2620/Info(1051134)
External Authentication Module: [Single Sign-On] enabled
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2620/Info(1051051)
Essbase Server - started
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2620/Info(1051243)
Exclusive operation security file compaction started. This may take a while
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2620/Info(1051244)
Security file compaction completed
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2620/Info(1051052)
Essbase Server - finished
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2120/Info(1051283)
Retrieving License Information Please Wait...
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2120/Info(1051286)
License information retrieved.
[Thu Oct 11 15:18:37 2012]Local/ESSBASE0///2120/Info(1051199)
Single Sign-On Initialization Succeeded !
[Thu Oct 11 15:18:37 2012]Local/ESSBASE0///2120/Info(1051232)
Using English_UnitedStates.Latin1@Binary as the Essbase Locale
Any ideas on what may be causing this?
Thanks in advance!
n

Hi Nelson,
Did you try increasing the Heap size for EAS ? Try the following and check if you still get the error -
increase the Java heap settings in the EAS script on a Unix platform that was configured using the automatic deployment method, do the following:
1. Navigate to the $HYPERION_HOME/deployments/{appserver}/bin directory.
2. Edit the setCustomParamseas.sh(.bat) script.
3. Modify or add the -Xms and -Xmx settings to the JAVA_OPTIONS variable. For example:
+JAVA_OPTIONS="-Xms256m -Xmx1024m -DComponentName=eas -DcomponentId=1e3bf92b2d9bb0493bcd3380127b0ca49ee7f50 -Dsun.net.inetaddr.ttl=0 -DHYPERION_HOME=/usr/local/oracle/hyperion -Dhyperion.home=/usr/local/oracle/hyperion -DEAS_HOME=/usr/local/oracle/hyperion/products/Essbase/eas -DESS_ES_HOME=/usr/local/oracle/hyperion/products/Essbase/eas/server -DEAS_LOG_LEVEL=5000 -DEAS_LOG_LOCATION=/usr/local/oracle/hyperion/logs/eas/easserver.log -DCLIENT_SERVER_DIFF_MC=true -Dweblogic.j2ee.application.tmpDir=/usr/local/oracle/hyperion/deployments/temp -Djava.io.tmpdir=/usr/local/oracle/hyperion/tmp ${JAVA_OPTIONS} "+
+*Note: For Tomcat deployments, the setting to modify is JAVA_OPTS:*+
+*JAVA_OPTS="-Xms256m -Xmx1024m*+
4. Stop and restart EAS for the setting to take effect.
Hope it helps....
KosuruS

Unable to Edit Snapshots for a Database

Similar Messages

Maybe you are looking for