Unable to edit theme correctly

Hi,
we're working with WDA which is integrated in a portal.
I use the sap-ep-themeroot parameter to link to a theme which has been designed in the portal. we don't have wda iviews which is a customers prerequisite
anyway its working that I can see a change in the style. But unfortunately its not working for every element. For example Button row looks crappy when a button is pressed (kind of toggle button)
Also a table doesn't look good, the scroll items are just buttons with a frame but no arrow symbol.
Also drop downs look terrible...
I didn't adjust anything on the theme so far, I thought these are minor changes to it and it works, but I cannot find that table is badly designed, I also cannot find Button row so I am not able to change it
do you have experience on that?
PS: I just tried to export it from portal and import it on the web dynpro system and as I use it the same issue is seen
PSS: I also tried to modify it in eclipse theme editor, also no button row, its quite the same
regards
stefan

To complete this thread:
The problem was a version conflict. It was a 2004 Portal, 2004s WDA System.
Well after going through several trial and errors, I figured out that I can take the theme from the 2004 release import it into eclispe theme editor 2004s and then export it. the export was then again importe into the 2004s WDA system...
it works, but tricky **** as always when it comes to version conflict
regards
Stefan

Similar Messages

Once photos transferred from iPhone 4S to PC, unable to edit them.

I transferred all photos from my iPhone 4S to my PC (Windows Vista). They are in my Windows gallery. However, I am not able to edit them. I want to rotate them, as most of them are sideways.. My PC gives me this error message "This photo cannot be saved because of a problem with the photos properties". It's in JPEG format so I am not sure why it won't let me. It's for all pictures that are transferred from iPhone to PC. Any suggestions?

That worked, however, a lot of work to do for all pictures. I noticed though, that these are the pictures I take with the camera vertically. When I take pictures holding camera horizontally, they transfer over correctly. If I take the vertical picture and change it to horizontal before sending to my email, it will then be able to be rotated in Windows. So it seems as though any pictures taken vertically willl transfer over horizontally, needing to be rotated, but only Paint will allow me to do that. Make sense? Any setting on the iPhone that will correct this, when taking pictures vertically? Most of the time, that's how I take pictures.

I purchased 2 itunes ecards and they were not received and I am unable to edit them. support is non existent!! Any ideas how I can cancel these since they weren't received?

I ordered two itunes cards tonight and my granddaughter didn't receive either of them!
I was unable to obtain online support of any kind.
The gift view will not allow me to edit the gift, delte or change it.
Any ideas how I can delete these from my account? Itunes support is non-existent!!

She's checked the spam folder on her email account as well as the inbox ? You should also be able to try resending it (and double-check the email address) : http://support.apple.com/kb/HT1541
If you can't then contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I am trying to edit my music list and then sync it to my iPhone 5 so I don't run out of storage space. However, I see the check marks on the iTunes library but am unable to uncheck them? How do I manually edit what will be synced to my phone?

I am trying to edit my music list and then sync it to my iPhone 5 so I don't run out of storage space. However, I see the check marks on the iTunes library but am unable to uncheck them? How do I manually edit what will be synced to my phone? (the check marks are not bolded, does this mean they are not in my library but only on my phone?)

You uncheck the music in your iTunes library on your computer and along with sync only checked songs and videos selected under the Summary selection for your iPhone sync preferences with iTunes, only checked songs in your iTunes library will be transferred to your iPhone or remain on your iPhone and the unchecked songs in your iTunes library that are currently on your iPhone will be removed when syncing.
Or make use of iTunes playlists and choose selected playlists, albums, artists under the Music selection for your iPhone sync preferences with iTunes and select the playlists below that you want transferred to your iPhone.

After iPhoto update some photos go black when trying to edit them and am unable to edit those photos

After iPhoto update some photos go black when trying to edit them and am unable to edit those photos. How do I fix this as this is the latest update?

If I hold down the Option key while launching iPhoto, I get the option to start a new library. Do I have to import all my thousands of photos into the new library?
In his original post the poster referenced the following. As to the new Library, see the end.
There are several possible causes for the Black Screen issue
1. *Permissions in the Library* : Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. *Minor Database corruption*: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. *A Damaged Photo*: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. *A corrupted iPhoto Cache*: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. *A corrupted preference file*: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
*If none of these help*:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Regards
TD

I am unable to download presentations as a powerpoint (from iCloud) if I edit them using Keynote on my Mac

I edit them on my iDevice and they download as a Powerpoint fine, but if I edited this on my Mac, it doesn't download as a Powerpoint.
Same is happening with anything edited on Pages, Numbers on Mac.
Anybody having the same problem? Or is this isolated?

I thought now that you could directly edit iCloud docs would mean the same as editing on an iDevice.
Apple really needs to improve on this...

Unable to Edit Photos in iPhoto '11 on when Original is Missing iPhotoDiet

When the Original is missing after running iPhoto Diet, iPhoto '11 is unable to edit the image at all.
This is unlike the behavior of iPhoto '09 and previous versions, which would make the current copy the new "Original".
Can this be fixed by iPhoto or is there an way to manually make new "Originals" based on the current rotated photos?
http://support.apple.com/kb/TA22873?viewlocale=en_US

When the Original is missing after running iPhoto Diet, iPhoto '11 is unable to edit the image at all.
That is correct - you must NEVER make any changes of any sort to the content or structure of the iPhoto library using third party programs that are not fully i{Photo aware and tested - and you certainly should never do any operations on the iPhoto library without a backup
This is unlike the behavior of iPhoto '09 and previous versions, which would make the current copy the new "Original".
iPhoto has NEVER done that to the best of my knowledge - iPhoto diet may have and may not with iPhoto '11 - that is a subject for iPhoto diet support - not iPhoto support
Can this be fixed by iPhoto or is there an way to manually make new "Originals" based on the current rotated photos?
No you must either put the library back exactly like it was, load your backup or start over
http://support.apple.com/kb/TA22873?viewlocale=en_US
What part of this warning did you not see as important?
To prevent this issue:
*Leave the contents of your iPhoto Library folder alone, and allow iPhoto to manage the images as designed.*
Update to iPhoto 5.0.1 or later. This update will prevent the loss of non-RAW images, but it does not eliminate issues with RAW files.
*Minimize the risk of image loss by keeping good backups:*
Export your current library as a backup copy.
*Back up new photos as soon as possible after taking them.*
If you already have good backup habits and copies of all your images outside of iPhoto, then obviously there is no need to export your current library. _*For those of you who haven't been backing up, exporting your current library will start you on the right path.*_
LN

11.2.3a - Unable to edit exsisting xp user policies

Maybe I could get some help here. I am currently unable to edit XP group user policies from my zenworks 11.2.3a zone. All policies were "minted" uner the 11.2.2 version. I was able to edit policies no problem before the 11.2.3a Update. All machines have the 11.2.3a Group Policy helper activeX control installed on them (Fresh images not upgrades). Here are the problems I am having
1. When the group policy editor opens, all my policies are set to "Not Configured", even though these are active working policies with many items configured
2. Once in a ten or so tries, the group policy editor opens the ADM's correctly. I am able to configure the needed settings. The group Policy editor closes and echoes back theat the "Settings were successfully imported". The problem here is that the "upload button" stays dimmed out and I am unable to uplaed the configured policy.
Not really to sure what is going on.

mdymes wrote:
>
> Maybe I could get some help here. I am currently unable to edit XP
> group user policies from my zenworks 11.2.3a zone. All policies were
> "minted" uner the 11.2.2 version. I was able to edit policies no
> problem before the 11.2.3a Update. All machines have the 11.2.3a
> Group Policy helper activeX control installed on them (Fresh images
> not upgrades). Here are the problems I am having
>
> 1. When the group policy editor opens, all my policies are set to
> "Not Configured", even though these are active working policies with
> many items configured
>
> 2. Once in a ten or so tries, the group policy editor opens the ADM's
> correctly. I am able to configure the needed settings. The group
> Policy editor closes and echoes back theat the "Settings were
> successfully imported". The problem here is that the "upload button"
> stays dimmed out and I am unable to uplaed the configured policy.
>
> Not really to sure what is going on.
I've seen something like this in earlier versions as well - in my case
it was the version of the browser I used and the security settings of
this. What browser do you use?
Do you see the same if you use the ZCC from antoher server?
Niels
A true red devil...

My .jpg's have ALL suddenly been converted to .pdf's and I am unable to open them

Using Windows 8.1, when I went to view some jpg's earlier today, I found they now show as "Adobe Acrobat Documents." When I try to open one, I get the error message that they are jpg's and Adobe is unable to open a jpg.???

And it was easy -- once I went to "Properties" in Windows Explorer. That was the tough part -- finding where to make the change.
Thank you for your help.
Bob Slone
[privated information removed by moderator]
From: ~graffiti <[email protected]>
To: Robert Slone <[email protected]>
Sent: Wednesday, January 7, 2015 4:09 PM
Subject: My .jpg's have ALL suddenly been converted to .pdf's and I am unable to open them
My .jpg's have ALL suddenly been converted to .pdf's and I am unable to open them
created by ~graffiti in Adobe Reader - View the full discussionEasy enough to fix. You need to change your system file associations to whatever program you used in the past to open .jpg files. Here's how -
> Choose the apps Windows uses by default - Windows Help If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7075247#7075247 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7075247#7075247 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

WebElements - Unable to edit WEPlatform

Hi,
I am new to WebElements and wanted to have a look at the functions to see how I can use in my reporting suite.
I am using CR11 and seem to be unable to edit the WEPlatform element to select the Crystal Reports version that I use.
I notice when I open the WebElements 246.rpt that it advises me that the report was written in a later version of Crystal.
Is this why I cannot edit the WEPlatform element ? If so how can I obtain a version of the web elements thjat will work with my Crystal version ?
Any help will be great.
Cheers,
Matt

hi Matt,
the users guide isn't really clear on this...i will make sure that this gets changed for the next release.
as webelements are Custom Functions you have to disconnect them from your repository to edit them. if you right click on the platform function and choose disconnect from repository then you can edit the function to match your platform.
once you've changed the function, you can add it back into your repository overwriting the existing one...that way when you build a new report using webelements you don't have to keep changing the platform function each time.
jamie

Unable to edit html file

Hi,
I downloaded an html file from our server to edit the logo. However, I am unable to edit the logo part. It's like commented out. And once I opened the file on Dreamweaver CS5, I am getting this pop-up message:
"This page contains some SWF objects that may not work properly in the most recent versions of Internet Explorer. Dreamweaver cannot convert them to the new SWF markups. Please delete each of them and insert again."
I can't edit the html file and change the logo. Please help.
Thank you and God bless!
Dannie

Dannie,
Are you familiar with dreamweaver templates and editable regions? If the logo is in the template, then you need to modify the template file. The changes you make to the template will automatically be propogated to all of the files which use the template. If your html file uses a template, the html code will look like its commented out.
Also, you should not have to download the html fiile from your server because you should always keep a copy of all the html files on your computer.
I don't know about the SWF error.
Good luck.
mitzy_kitty

Unable to edit Hosts file in Win7 Home Prem 64bit.

Clean install. Administrator account. Unable to edit the permissions of the hosts file. There is one in the drivers\etc file, which I cannot edit. There is supposed to be one in %systemroot% \SysWOW64\drivers\etc but there is no etc folder in the drivers folder.
Turned off DNS Server. gpedit.msc not found when calling it in "run". This is the first time I've used 64bit anything, so a bit of a newb in that respect.
Any ideas?

Hi,
As you would know, some of the Windows 7 users can’t save the host file how they like it. The host file itself will simply vanish what the user had done with it.
In my scenario, I was unable to fix this even after all the instructions provided in above posts. Hence, I have come up with my own idea and luckily it
worked.<o:p></o:p>
For those users who experience this problem, here are the instructions to fix it.
First of all, you should have the administrative privileges to edit the host file. In normal case, if an admin user directly go to the host file in system 32 and add his preferences
and then save it, it should keep the changes. However, in some wicked scenarios, it will not. I had done a detailed research on this through all the available online forums and even contacted Microsoft several times with no luck.
So, here you go with a correct solution for this problem.
Note: If you are not comfortable with Windows OS and don’t know what you are doing, this process can mess up things.
Hence, do not attempt if you are not 100% sure you can make it.
Login to an administrator account.
In the run command (Windows key + R) type, “control folders” and hit enter.
Click on the tab called view.
Select the radio button for Show hidden files, folders and drivers –ON.
Uncheck the ‘Hide extension for known file types-ON
Click on Apply and then OK.
Type “drivers” in run command and hit enter. It will take you to where the folder “drivers” located in System 32.
From the “drivers” folder, double click the folder named “etc.”
Now you can see the “host” file along with others.
Now, in the search area in start menu, type “notepad.exe” and open the notepad.exe as administrator. (In order to do this, you can right click on the notepad.exe shown and select
“Run as Administrator.” If UAC prompted, click YES/OK)
Now, you will have a notepad open with administrative privileges.
At the top left side of the notepad click on “file” and then select “Open.”
A box will appear which will allow you select the file to open. Carefully, navigate to the location where the “host” file is located. To do that, select the drive where you
installed Windows. If you have the Windows installed in C: select ‘Local Disk (C :)’ > Windows > System 32 > drivers > etc. At this point, you might not have another option to proceed or select from. The window would be empty. To proceed further,
select the option “All files” from the drop down menu which is located above the “Open” and “Cancel” button. You can now see all the files located in etc folder.
Select “hosts” from the menu and click on “Open.” Note: You can either click on open or double click on the file.
Now, you will have the host file information open in the notepad which you had already initiated before with administrative privileges.
Make whatever changes you as you wish. (Example: If you need to block a web site called
www.block123.com you can type 127.0.0.1
www.block123.com right under the local hosts.
Make sure you do not change any other letters or characters which are already saved in host file.
This will completely mess up your computer. For more information on the information about host file, refer the Microsoft web site:
http://support.microsoft.com/kb/972034 . If you
have accidently delete/edit anything from host file, please delete the complete information stored in host file and copy and paste the host file information from Microsoft which is appropriate for your Operating System.)
Click on “file” again and select “Save as” and save it in etc. If the path is showing correct to etc folder, save it to etc. If it is navigated to somewhere else, follow the
instructions provided above and select etc folder and then save it.
Now, go back to the actual host file location which is in System32 > Drivers > etc (You would have it already open if you had followed the instructions just like the way
I have provided)
There you can see 2 host files. One which has already been there and the other one you just saved.
Among the two, one is called “hosts” and the ‘type’ would be ‘file.’ This is the original host file. The other which you have just saved will be named as “hosts.txt” with the
file type as ‘Text Document.’
Right click on the original host file and select rename. You can even click on that file and press F2. This will enable the option to rename the file. Rename the original host
file as “hostold” and hit enter.
Now, select the second host file which we have saved as a text document and rename it as “hosts.” Make sure that you DELETE the .txt file extension in order to change the type
“Text Document” to “File” and hit enter.
Now, you have successfully saved the host file with your preferences.
You can now delete the file which we renamed as “hostold.”
We are done. You would need to do this process all over if you need to edit the host file again. I know it is difficult, however, it is our own requirement and we have to invest
few minutes on this.
Enjoy your computer with a great feeling that you have finally edited the host file as per your wish and take it from here. Wish you luck.
Should you have any questions, please feel free to ask.

Unable to edit the site in sharepoint designer 2013

Hi,
I have created a custom list for one of my requirement, and I want to change the look and feel of the custom list view, so I was trying to edit this list in SharePoint Designer 2013, I'm able to open the list in SPD 2013, but unable to edit anything since
I'm getting the "This page does not contain any regions that you have permission to edit." error.
It will highly appreciated if anyone help in resolving the issue.
Thanks in advance.
Anil

Anil,
Below links will help you. Please use them.
SharePoint
Designer 2013 – How to modify List View web part filters and parameters
Create
a custom list view using SharePoint Designer
Share point list view custmization
in sharepoint 2013
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Unable to edit PDF files in Adobe Acrobat DC

i am unable to edit a file in adobe acrobat dc i have tried with multiple files and everytime i click edit pdf it get a pop up that says adobe acrobat dc has encountered an unknown error however i have been able to edit a few pdf's i tried everything from re downloading a new file to saving it in acrobat reader and nothing is working please help

Hi imadb,
Since you have the Acrobat Pro DC 30-day trial, please try opening that to edit your PDFs (rather than opening them in Reader, and clicking the Edit PDF button).
If you search your computer, you should have both an Adobe Acrobat Reader DC and and Adobe Acrobat Pro application. They can coexist, but it does make things a little confusing.
If you want to evaluate Acrobat Pro DC, it's best that you open it directly. That way, you can get the real "lay of the land" with Acrobat before making any purchase decisions.
Best,
Sara

Is it possible to uninstall OS Mountain Lion and go back to OS Lion? This upgrade has been a headache! Mail freezes, all contacts all gone and I am unable to import them again. HELP?

I recently downloaded and install OS Mountain Lion on my iMac. Consequently none of the new mail features are available and everytime I attempt to check for new mail or send mail, the mail app freezes and has to be forced closed. Also, all of my contacts are gone, and I am unable to import them back. And I just discovered that all of my calendar items are missing too. Is anyone else experiencing these issues?

Thank you for the tip, Andreas. That is exactly what I did for my iPad, and it works like a charm. Unfortunately, when I try to set up my Gmail accounts in Mountain Lion using Exchange services, I receive the following error after putting in m.google.com in the server address field:
The Exchange server "(null)" is not responding. Try checking the network connection, and that the server name is correct. Otherwise, the server might be temporarily unavailable.
I know this works for iOS, but it seems like this will not work on Mac OS X.
Any other suggestions? Thank you.

Unable to edit theme correctly

Similar Messages

Maybe you are looking for