Unable to Edit User

Hi,
I didn't have any problem creating new users in Portal using the Portal30 administrator id. But I when try to Edit the existing users by selecting a User from the list and clicking on the Edit button, all I get is the HTTP 404 Not Found with the URL of:
http://xxx/pls/portal30/PORTAL30.wwptl_ls_admin.find
Via PORTAL30 schema, I verified that pacakge wwptl_ls_admin is valid and has the FIND as an external procedure.
Does anyone know what the problem might be? Thanks. Binh.

[13284] 120106.095830.3107: Storage: Get quota for F:\Users\Shares\Alex
[13284] 120106.095830.3107: Storage: Initialize the quota manager.
[13284] 120106.095830.3575: AdminTME: Status: TaskId = StorageTasks.TaskGetUserShareFolderQuota, RootTaskId = TaskEditUser, Success: False, Warning: False, Continue: True, Message:
[13284] 120106.095830.4667: Exception:
An exception of type 'Type: System.UnauthorizedAccessException, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' has occurred.
Timestamp: 01/06/2012 09:58:30
Message: Attempted to perform an unauthorized operation.
This seems to indicate that the Administrator or System account is not able to access the particular folder. It may be a permissions issue where the person has modified permissions on a file or folder that is locking everyone else out. Try resetting the
permissions on this folder.
Regards, Boon Tee - PowerBiz Solutions, Australia - http://blog.powerbiz.net.au

Similar Messages

Unable to edit users in UPA SharePoint 2013.

Hi,
I have created UPA service application just now, I am able to see 30 users in the site. Am able to search for the users but am unable to edit the users from the search result. Am not getting popup to edit profile after right clicking. I have provided permissions
to below accounts On UPA Databases. I have added the users under permissions option, administrators option in ribbon and provided full rights.
AppPool account user
farm admin
my admin account
Anyone have idea on what kind specific permissions I need to provide to get edit profile option.
Thanks,
Prashanth J

Is IE running in compatibility mode, and if you're accessing CA from the SharePoint server, did you run it "As Administrator"?
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Unable to edit user information from User Admin applet

Hi
I'm unable to update user information from user admin applet. After selecting a particular user, i'm updating his full name and trying to save the details. When i click on save i'm getting below error
"Unable to execute service EDIT_USER and function addUserAttributes",(System Error: Unable to execute query 'uUsersClassifiedMarkings(UPDATE Users SET uClassifiedMarkings='No Markings'WHERE(uClassifiedMarkings is null OR uClassifiedMarkings="))'.ORA-00904:"UCLASSIFIEDMARKINGS":invalid Identifier java.sql.SQLSyntaxException: ORA-00904:"UCLASSIFIEDMARKINGS": invalid identifier)
Kindly let know what is issue or how to resolve this error

Ok,lets give it a shot. Can you please check if you have any Security Classifications added by navigating to Records->Configure->Security->Security Classification
If you do not see any entries here, then use the Add button to add the following
- No Markings
- Secret
- Top Secret
- Confidential
Now try to update the user info using the admin applet. In the edit window assign Security Classification to "No Markings" and try submitting the update. Let us know what is the outcome.
I completely agree with William on his analysis. Please try these steps if you are working on a Dev/POC instance.
Regards,
- Anand

Unable to edit User Status in Service Order

Hi Experts,
There are several service orders with user status 'Open', whereas the system status is 'In Process'. The individual items are either set to Completed or are Released. I am unable to change the user status from 'Open', as there are no other options available in the dropdown list in edit mode. I even tried changing the status in CRMD_ORDER and was not able to do it. I checked the configuration for this and its perfectly fine. The status profile has been maintained properly.
I tried using FM CRM_STATUS_CHANGE_EXTERN and CRM_STATUS_CHANGE_EXTERN_OW for this purpose and it still did not work. Any help/tips to resolve this will be highly appreciated.
Thank you,
Nanda

Hi Nanda,
As per your last reply, for some Service Orders you are unable to change the Status. Can you have check whether those service Orders are error free?
Sometimes, when there are errors in service orders or in 1Orders you cannot change the status from In Process or Open even when you have released certain Items.
Hope this helps.
Thanks,
Samantak.

Unable to edit user properties in SBS Console (2011)

Hello,
When attempting to edit properties for a user in the SBS Console, I receive the following error: "Attempted to perform an unauthorized operation." This only occurs when attempting to edit the user account properties for this single user.
I understand that this may be a scurity permission problem in Active Directory Users and Computers, but I do not know which permission entries would cause this. Is this where I need to look or is there another way to resolve this?
Thanks in advance.
Jeff

[13284] 120106.095830.3107: Storage: Get quota for F:\Users\Shares\Alex
[13284] 120106.095830.3107: Storage: Initialize the quota manager.
[13284] 120106.095830.3575: AdminTME: Status: TaskId = StorageTasks.TaskGetUserShareFolderQuota, RootTaskId = TaskEditUser, Success: False, Warning: False, Continue: True, Message:
[13284] 120106.095830.4667: Exception:
An exception of type 'Type: System.UnauthorizedAccessException, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' has occurred.
Timestamp: 01/06/2012 09:58:30
Message: Attempted to perform an unauthorized operation.
This seems to indicate that the Administrator or System account is not able to access the particular folder. It may be a permissions issue where the person has modified permissions on a file or folder that is locking everyone else out. Try resetting the
permissions on this folder.
Regards, Boon Tee - PowerBiz Solutions, Australia - http://blog.powerbiz.net.au

Manage Profile Services - Unable to edit User Properties or User Profiles

SharePoint 2013 - fresh site, with Mysites, and the User Profile Service running. The UPS is ran under a separate account, and the farm account has securityAdmin rights and directory replication rights.
When I enter Manage User Properties, I get a complete list of properties but no way to edit them, the same happens when I go into User Profile Properties, there is no where to edit the users. Has anyone seen this before and if so what step have I missed
in setting the UPS and MySites Up.
Both Administrator and Farm Admin have Administrator rights to the UPS Application, and it's the Profile User Service that's running at the minute not the Profile User Synchronization Service.
Any help would be appreciated.
Thanks
David

Thanks for the reply Adnan, however I think you missed the point. There is no capability to edit the properties, there's no dropdown to select edit form, in any of those areas against any of the properties. I can see them but not edit them.
It must be a permissions problem but I've no idea where it may lie.
Here's how the UPS and Mysites were built:
Created a separate user for the UPS account (UserUPS), and registered it as a Managed Service account.
Added Replicating Directory Changes to the Farm account.
Started the User Profile Service.
Created the UPS application using the UserUPS account for the application pool.
Configured the Directory Import - used SharePoint Active Directory Import.
Created a new Synchronization connection using the Farm account - it worked.
Ran the synchronization - it worked, everything was import.
Went into Manage Profile Service, Under People click on Manage User Profiles, entered a users name, clicked on it when it appeared - nothing, no edit capabilities at all.
So at a loss as to where I've gone wrong?
Ran Add-SPAdmin - it added the Farm account to the configuration db, and when I tried it against the Profile database it complained, basically saying not possible,
I'm out of ideas at the minute and need to get this working so we can use SharePoint to hold a Skills map.
Thanks
David

User unable to edit contacts

I have a user with Outlook 2013 connected to an 2010 Exchange Server. I have a user that is unable to edit any existing contact, getting an error: Your changes cannot be saved because you don't have permission to modify some or all of the items in this folder.
Do you want to save a copy of this item in the default folder for the item?
I have checked the permissions on the mailbox folder as well as the Contacts folder. The user has "Owner" permission to these folders.
No other users report the problem, and loading the users account on another computer demonstrates the same problem.
Any ideas what I am missing?

Hi,
The error indicates that the issue is related to permission. I recommend you use the Get-MailboxPermission -Identity xxx |fl cmdlet to check if the permission is right. What's more, please check if OWA has the same issue.
If the issue persists, I recommend you remove the owner permission at first. Secondly, use the following cmdlet to add the owner permission and check the result.
Add-MailboxPermission -Identity "xxx" -Owner "xxx"
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

11.2.3a - Unable to edit exsisting xp user policies

Maybe I could get some help here. I am currently unable to edit XP group user policies from my zenworks 11.2.3a zone. All policies were "minted" uner the 11.2.2 version. I was able to edit policies no problem before the 11.2.3a Update. All machines have the 11.2.3a Group Policy helper activeX control installed on them (Fresh images not upgrades). Here are the problems I am having
1. When the group policy editor opens, all my policies are set to "Not Configured", even though these are active working policies with many items configured
2. Once in a ten or so tries, the group policy editor opens the ADM's correctly. I am able to configure the needed settings. The group Policy editor closes and echoes back theat the "Settings were successfully imported". The problem here is that the "upload button" stays dimmed out and I am unable to uplaed the configured policy.
Not really to sure what is going on.

mdymes wrote:
>
> Maybe I could get some help here. I am currently unable to edit XP
> group user policies from my zenworks 11.2.3a zone. All policies were
> "minted" uner the 11.2.2 version. I was able to edit policies no
> problem before the 11.2.3a Update. All machines have the 11.2.3a
> Group Policy helper activeX control installed on them (Fresh images
> not upgrades). Here are the problems I am having
>
> 1. When the group policy editor opens, all my policies are set to
> "Not Configured", even though these are active working policies with
> many items configured
>
> 2. Once in a ten or so tries, the group policy editor opens the ADM's
> correctly. I am able to configure the needed settings. The group
> Policy editor closes and echoes back theat the "Settings were
> successfully imported". The problem here is that the "upload button"
> stays dimmed out and I am unable to uplaed the configured policy.
>
> Not really to sure what is going on.
I've seen something like this in earlier versions as well - in my case
it was the version of the browser I used and the security settings of
this. What browser do you use?
Do you see the same if you use the ZCC from antoher server?
Niels
A true red devil...

User unable to edit document in protected mode until 'enable all features' is selected everytime.

In light of the most recent vulnerabilities identified in version 10.1.1 and the instructions in - http://www.adobe.com/support/security/advisories/apsa11-04.html
to use protected mode, I have informed my customers how that should be performed. However, I have at least one user that is unable to edit their document until they select the ' enable all features' function. Even after they do that, and the specific file is listed in the in the security (enhanced) > priviledged locations list, the user is required to select 'enable all features' every time for this file.
Can someone tell me a solution?

>Where are you seeing the "enable all features function"?
The notification bar at the top of the document

WebElements - Unable to edit WEPlatform

Hi,
I am new to WebElements and wanted to have a look at the functions to see how I can use in my reporting suite.
I am using CR11 and seem to be unable to edit the WEPlatform element to select the Crystal Reports version that I use.
I notice when I open the WebElements 246.rpt that it advises me that the report was written in a later version of Crystal.
Is this why I cannot edit the WEPlatform element ? If so how can I obtain a version of the web elements thjat will work with my Crystal version ?
Any help will be great.
Cheers,
Matt

hi Matt,
the users guide isn't really clear on this...i will make sure that this gets changed for the next release.
as webelements are Custom Functions you have to disconnect them from your repository to edit them. if you right click on the platform function and choose disconnect from repository then you can edit the function to match your platform.
once you've changed the function, you can add it back into your repository overwriting the existing one...that way when you build a new report using webelements you don't have to keep changing the platform function each time.
jamie

Lync 2013 client - part of Office 2013 Pro Plus - unable to edit or remove picture, option is grayed out.

Hi Team,
Lync 2013 client - part of Office 2013 Pro Plus - unable to edit or remove picture, option is grayed out.
Using Exchange 2010 Server and Lync 2010 Server at the back. To the best of my knowledge, this option is only available when using Exchange 2013 rather than Ex 2010.
Can somebody confirm this as I am not 100% sure about it.
Appreciate your help. Thanks
Muhammad Nadeem Ahmed Sr System Support Engineer Premier Systems (Pvt) Ltd T. +9221-2429051 Ext-226 F. +9221-2428777 M. +92300-8262627 Web. www.premier.com.pk

Hi,
The photo precedence in Lync 2013 is high-resolution photo from Exchange 2013 -> Photo from web address -> Active Directory photo. The "Edit or Remove Picture" button is available if you integrate Lync Server 2013 with Exchange 2013.
Since you are Lync server 2010 and Exchange 2010, you can choose the following two options:
The thumbnailPhoto attribute on the user's object in Active Directory Domain Services
A URL configured by the user
More details:
http://blogs.technet.com/b/nexthop/archive/2010/11/22/microsoft-lync-2010-photo-experience.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Unable to edit the fields in PDF interactive form

Hi,
We are in the process of developing an interactive form integrating Web Dynpro ABAP with Adobe forms.
As of now we are able to send the data to Adobe form from Web Dynpro.
But we are facing the following problem.
i) Unable to edit the form data for entering/changing the contents of the fields in PDF document, which is presented to user with a Web Dynpro application URL.
We have already unset the 'ReadOnly' property of the interactive UI element.
We are currently working on ZCI installation with SAP SP08, GUI patch level 20, Adobe Reader version 8.0
Please advise...
Thanks,
Satya.

Hi,
Check your ADS settings, I feel it's due to lack of some config in ADS only.
Regards
<i><b>Raja Sekhar</b></i>

Unable to Edit Price Lists in Advanced Pricing Vision Instance

Hello I have a new Vision Instance for 12.1.3 and when I switch responsibility to Oracle Pricing Manager Vision Operations I am unable to edit and of the price lists or modifiers that are in the system by default. any suggestions on what I need to update as I have not run into this before in previous Vision instances

this was the solution to this issue
Solution
1. Be sure to set the following profile option values at user level
a. QP: Pricing Transaction Entity = ORDFUL and save.
b. QP: Source System Code to 'Oracle Pricing' (if not already) and save.
2. Responsibility: Order Management Super User (or equivalent)
3. Navigation: Pricing > Price Lists > Price List Setup
4. Open the price list: XYZ CHARGES
5. The form will now open without error, and changes will be accepted

Unable to edit XLSM files in SharePoint using hyperlink?

Hi All,
Unable to edit .xlsm files using hyperlink, please guide me.
Thanks
Ramanjulu Naidu N

Hi Ramanjulu,
Did this happen to all users?
Did the "Read Only/Edit" dialog pop up when you click the .xlsm Name link from SharePoint 2010?
Could you see the yellow message bar with "Edit Workbook" button when you open the .xlsm file in your Excel Application?
You can check if the following kb article could solve yellow message bar missing problem, set "Browser File Handling" as Permissive for your web application, or update the registry for client Office application.
Also check if the add-on "SharePoint OpenDocuments Class" is enabled in your IE 32-bit browser.
http://support.microsoft.com/kb/2661910
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Unable to edit Hosts file in Win7 Home Prem 64bit.

Clean install. Administrator account. Unable to edit the permissions of the hosts file. There is one in the drivers\etc file, which I cannot edit. There is supposed to be one in %systemroot% \SysWOW64\drivers\etc but there is no etc folder in the drivers folder.
Turned off DNS Server. gpedit.msc not found when calling it in "run". This is the first time I've used 64bit anything, so a bit of a newb in that respect.
Any ideas?

Hi,
As you would know, some of the Windows 7 users can’t save the host file how they like it. The host file itself will simply vanish what the user had done with it.
In my scenario, I was unable to fix this even after all the instructions provided in above posts. Hence, I have come up with my own idea and luckily it
worked.<o:p></o:p>
For those users who experience this problem, here are the instructions to fix it.
First of all, you should have the administrative privileges to edit the host file. In normal case, if an admin user directly go to the host file in system 32 and add his preferences
and then save it, it should keep the changes. However, in some wicked scenarios, it will not. I had done a detailed research on this through all the available online forums and even contacted Microsoft several times with no luck.
So, here you go with a correct solution for this problem.
Note: If you are not comfortable with Windows OS and don’t know what you are doing, this process can mess up things.
Hence, do not attempt if you are not 100% sure you can make it.
Login to an administrator account.
In the run command (Windows key + R) type, “control folders” and hit enter.
Click on the tab called view.
Select the radio button for Show hidden files, folders and drivers –ON.
Uncheck the ‘Hide extension for known file types-ON
Click on Apply and then OK.
Type “drivers” in run command and hit enter. It will take you to where the folder “drivers” located in System 32.
From the “drivers” folder, double click the folder named “etc.”
Now you can see the “host” file along with others.
Now, in the search area in start menu, type “notepad.exe” and open the notepad.exe as administrator. (In order to do this, you can right click on the notepad.exe shown and select
“Run as Administrator.” If UAC prompted, click YES/OK)
Now, you will have a notepad open with administrative privileges.
At the top left side of the notepad click on “file” and then select “Open.”
A box will appear which will allow you select the file to open. Carefully, navigate to the location where the “host” file is located. To do that, select the drive where you
installed Windows. If you have the Windows installed in C: select ‘Local Disk (C :)’ > Windows > System 32 > drivers > etc. At this point, you might not have another option to proceed or select from. The window would be empty. To proceed further,
select the option “All files” from the drop down menu which is located above the “Open” and “Cancel” button. You can now see all the files located in etc folder.
Select “hosts” from the menu and click on “Open.” Note: You can either click on open or double click on the file.
Now, you will have the host file information open in the notepad which you had already initiated before with administrative privileges.
Make whatever changes you as you wish. (Example: If you need to block a web site called
www.block123.com you can type 127.0.0.1
www.block123.com right under the local hosts.
Make sure you do not change any other letters or characters which are already saved in host file.
This will completely mess up your computer. For more information on the information about host file, refer the Microsoft web site:
http://support.microsoft.com/kb/972034 . If you
have accidently delete/edit anything from host file, please delete the complete information stored in host file and copy and paste the host file information from Microsoft which is appropriate for your Operating System.)
Click on “file” again and select “Save as” and save it in etc. If the path is showing correct to etc folder, save it to etc. If it is navigated to somewhere else, follow the
instructions provided above and select etc folder and then save it.
Now, go back to the actual host file location which is in System32 > Drivers > etc (You would have it already open if you had followed the instructions just like the way
I have provided)
There you can see 2 host files. One which has already been there and the other one you just saved.
Among the two, one is called “hosts” and the ‘type’ would be ‘file.’ This is the original host file. The other which you have just saved will be named as “hosts.txt” with the
file type as ‘Text Document.’
Right click on the original host file and select rename. You can even click on that file and press F2. This will enable the option to rename the file. Rename the original host
file as “hostold” and hit enter.
Now, select the second host file which we have saved as a text document and rename it as “hosts.” Make sure that you DELETE the .txt file extension in order to change the type
“Text Document” to “File” and hit enter.
Now, you have successfully saved the host file with your preferences.
You can now delete the file which we renamed as “hostold.”
We are done. You would need to do this process all over if you need to edit the host file again. I know it is difficult, however, it is our own requirement and we have to invest
few minutes on this.
Enjoy your computer with a great feeling that you have finally edited the host file as per your wish and take it from here. Wish you luck.
Should you have any questions, please feel free to ask.

Unable to Edit User

Similar Messages

Maybe you are looking for