Unable to edit values of Unused paramters while scheduling a report in Infoview

Hi
I have a crystal report which is using a Cascading Dynamic Parameter (LOV in BVM) e.g. Country -> State > City.
I have not used Parameter Country anywhere in my report formulas but have used State and City.
When I publish the report on BO Repository, I get prompted for all the parameters when I select View on Demand. However When I try to schedule an instance of the same report It becomes Unused Parameters and am not able to edit their values.
Can you please advise me on this, how can I Schedule an instance of this report.

Abhilash
You are correct that it shows all the prompts but only when we run the report either directly from the CR Designer or via View on Demand in Infoview/CMC.
But if I try to schedule an instance of this report, I am getting a check box in the parameter section which says "Show unused parameters" to see this dyanamic prompt. And When I check that box in Infoview still I am not able to select any value for this prompt as it's greyed out.
Hope I am able to explain my query to you.
Also attached a screen shot of the scenario for your reference.

Similar Messages

  • Error while scheduling DESKI report in infoview

    I m scheduling a DESKI report to users enterprise inbox from infoview using a server group. This server group has DesktopIntelligence Job server, Destination Job server, Adaptive Job server and Program Job servers and all these servers are running.
    When I schedule the report to boldusers enterprise inboxbold it get failed and shows this error message
    bolddestination DLL disabled. []: [CrystalEnterprise.Smtp] bold
    I m wondering what has to be enabled for scheduling a report to infoview's own inbox.

    Abhilash
    You are correct that it shows all the prompts but only when we run the report either directly from the CR Designer or via View on Demand in Infoview/CMC.
    But if I try to schedule an instance of this report, I am getting a check box in the parameter section which says "Show unused parameters" to see this dyanamic prompt. And When I check that box in Infoview still I am not able to select any value for this prompt as it's greyed out.
    Hope I am able to explain my query to you.
    Also attached a screen shot of the scenario for your reference.

  • FTP Delivery Destination Not visible while scheduling a report.

    Hi All,
    We are implementing BI Publisher 11g (As part of OBIEE 11g).
    In BI Pub administration we have defined FTP and Email Delivery Destinations.
    But while Scheduling a report, under Destinations we see only Email option, we are not seeing FTP option.
    Is this happening due to any of the missing configuration or any privileges are missing?, please clarify.
    Thanks,
    Aditya

    Do you have "Use Secure FTP" checked?
    I tried adding a source with that checked and the FTP option didn't show up either, but when I unchecked that box I was able to see the FTP option.

  • List of values apprear for email alert while scheduling the report

    List of values apprear for email alert while scheduling the report

    Hi,
    Can you please expand on your issue?
    Cheryl

  • Setting Date value in File Name while scheduling report to File System

    I am trying to set the file name as %SI_Name% Current Date.extension in Destination section while scheduling a crystal report to File system.
    So in Use Specific Name section i have added %SI_NAME% %SI_STARTTIME%.%EXT%.
    Schedule works fine for me and I get the document in the file location with name  'Title 2009-06-26-12-53-17.pdf".
    But I dont want time to be printed in the title, so the title should be "Title 2009-06-26.pdf". How i can achieve this.
    -Raghu

    Is there any way to achieve this?
    -Raghu
    Edited by: Raghavendra Barekere on Jul 5, 2009 3:09 PM

  • BI Publisher: Issue while scheduling the report/query to be executed daily

    Hi,
    We are using Oracle Business Intelligence 11.1.1.6.3 and while we schedule a report(RTF Template) we are facing issue.We use bursting query and when we select option to execute immediately it runs fine and sends notifications,it also executes when we schedule it to run Once but fails when i schedule the report to be executed DAILY .

    hii
    The query does not includes any RKF, CKF any complex calculations. as I said before also query is based on MP which is designed on a single Cube. There are no such navigational Attributes used for selection, Number of records are not more than 300 on that particular selection parameter
    there is only one info object which is creating issue & it is a master info object. If i am restricting this info object in the query & then executes the query , it gives the error msg also i put a variable for input parameter, & there I restrict the value, then also query executes with an error msg
    But if query is not restricted with  any value for that info object then query executes with in a second.
    Thanks
    neha

  • OBIEE error while scheduling the report.

    Hi,
    I scheduled one report in OBIEE tool for 8.30 pm but that report get failed.
    I executed the same report many times with the same database configuration, same FTP configuration,
    I never get such exception before.
    In the morning i again execute that report with same configuration and it works.
    I am unable to find the cause of the error.
    bellow is the error description.
    oracle.apps.xdo.servlet.scheduler.ProcessingException: java.sql.SQLException: ORA-01033: ORACLE initialization or shutdown in progress
    could any body please explain what is the exact cause of the issue.

    The oracle Db you are connected is being shut-down.

  • Error while scheduling the report in bi publisher

    oracle.apps.xdo.servlet.scheduler.ProcessingException: Error occurred while scheduling the job.
         at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.getDateObject(SchedulerServlet.java:2202)
         at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.scheduleJob(SchedulerServlet.java:1394)
         at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.doPost(SchedulerServlet.java:289)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
         at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:80)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
         at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
         at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)

    Hi,
    I am newly using BI publisher . I am using 10.1.3.4.0 . I am just trying to create a report in test name. that is the first step to create a report where i am getting error. I am using default RPD paint , where all the user and Groups are defined .

  • Error Code:942 While Scheduling a report in BI Publisher

    Hi All,
    I am trying to schedule one report in BI Publisher.
    After Clicking Submit Button while scheduling report,i get following error:
    Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.0.0) (Build 080319)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: ORA-00942: table or view does not exist Error Code: 942 Call: UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + 50 WHERE SEQ_NAME = 'JOB_ID_SEQ' Query: DataModifyQuery()
    Kindly Help me in resolving this issue
    Regards
    Amrita Singh

    i know the issue,i can give quick fix, but in-order to make sure you don't get another glitch like this.
    I would recommend, you to install the scheduler in another schema or another db.
    Re-installing the scheduler schema tables will fix this.

  • Database Error While Viewing Crystal Report In Infoview

    Hi,
    BO and Crystal Designer version is BO XI 3.1 SP2 FP2.6.
    Issue:
    While viewing crystal report for a particular user id in infoview, following error is coming:
    Error in File EPACertificate.rpt: Database Connector Error
    However, we are able to view the report in thick client Crystal Designer using same user id. This issue is occurring only for this user and rest of the users are able to view the report in Infoview and Crystal Designer.
    It would be great if any of you can provie a solution to this issue.
    Thanks in advance,
    Jaya

    closing it.

  • Unable to see the csv option while scheduling the report

    I'm using BO XI 3.1. While i'm trying to make a schedule of a report, i am unable to see the csv export option.  Is there a way to enable in the csv option?
    Build version : 12.1.0.882
    Edited by: mhsrinivasan on Mar 10, 2011 2:36 AM Added the version details

    Scheduling the reports in CSV formate is possible in BO XIr3.1.
    I would suggest you to contact to your BO Admin to check weather you have proper rights or not, in CMC scheduling part.

  • A error while scheduling a report

    Hi Experts . i need your help .
    I have a user getting error when he is trying to schedule a workbook in the Discoverer plus/desktop version is 10g (9.0.4) on linux
    This is the error .
    Error
    Database Error - ORA-01031: insufficient privileges
    ORA-06152: at "SYS.DBMS_SYS_SQL", line 1608
    ORA-06152: at "SYS.DBMS_SQL", line 33
    ORA-06152: at "DISCO_WKB_REP.EUL5_BATCH_REPOSITORY", line 399
    ORA-06152: at line 2
    The user is getting this error only for one report . Please let me know how to resolve the issue ?
    Thanks
    Kanna

    check your discoverer user role using:
    select granted_role from dba_role_privs where grantee=upper('<username>');
    from your database. the database to which the desktop is connecting.
    check for connect, resouce, multiorg roles.

  • Error while scheduling Crystal Report within CMC with Destination as Email

    Hi,
    I have added a Crystal Report within the CMC. Before scheduling it, I have specified the Destination as Email and entered  the necessary details. After scheduling it, the Report Instance gives a Failure with Error Message as -
    destination DLL disabled.CrystalEnterprise.Smtp
    How to rectify this?
    Thanks,
    Amogh

    Hi,
    go to the CMC and invoke the server list under Servers. Locate the entry for the Crystal Reports Job Server, select it and invoke the context menu using the right mouse button. Select Destination and add Email in the list of the possible delivery options. Configure the connection data for your SMTP server and restart the Crystal Report Job Server.
    Regards,
    Stratos

  • WebElements - Unable to edit WEPlatform

    Hi,
    I am new to WebElements and wanted to have a look at the functions to see how I can use in my reporting suite.
    I am using CR11 and seem to be unable to edit the WEPlatform element to select the Crystal Reports version that I use.
    I notice when I open the WebElements 246.rpt that it advises me that the report was written in a later version of Crystal.
    Is this why I cannot edit the WEPlatform element ? If so how can I obtain a version of the web elements thjat will work with my Crystal version ?
    Any help will be great.
    Cheers,
    Matt

    hi Matt,
    the users guide isn't really clear on this...i will make sure that this gets changed for the next release.
    as webelements are Custom Functions you have to disconnect them from your repository to edit them. if you right click on the platform function and choose disconnect from repository then you can edit the function to match your platform.
    once you've changed the function, you can add it back into your repository overwriting the existing one...that way when you  build a new report using webelements you don't have to keep changing the platform function each time.
    jamie

  • Unable to run Store Procedure based deski report in Infoview

    Hi All,
    I have a Deski report which is created using Store Procedure. I am able to run report in Full Client Deski. But I am unable to run / schedule same report thorough infoview.
    More details about report
    - Report uses 3 store procedures. When I ran report in infovew I get error message as "SP2 Dataprovider did not refresh properly".  -- SP2 is Dataprovider name.
    - Same report I am able to run in Dev environment. After migration to Model, report fails to run in model infoview.
    - I am able to Run report only for 1st. When I refresh and run with same parameter report shows error.
    Any input will be great help.
    Thanks,
    NV

    Hi,
    Could you please test the following solutions to resolve the issue.
    Solution1:
    Test the issue by inserting the following parameter in .SBO file.
    <Parameter Name="Force SQLExecute">Always</Parameter> .
    Solution2
    Just put SET NOCOUNT OFF in the end of the stored procedure SQL.
    If the above doesnu2019t works then please try the following solution.
    Solution3
    Make the new connection from the scratch using ODBC connection and test the issue.
    I hope this will help you.
    Regards,
    Sarbhjeet Kaur

Maybe you are looking for