Unable to edit XQuery map
Is anyone else having problems editing XQuery maps in WL Workshop? I have created
my own schema and then use it to map the input parameters to internal Java types
for a Web Service. The XQuery editor works fine the first time - that is I bring
up the graphical editor and draw the lines to define the mapping. After I close
the editor, I am unable to open up the map again. I get an XQuery Transformation
error as follows: "Failed to parse the XQuery after user edits". This even happens
if I try to open a map in the BEA examples project (i.e. InputMapMultiple.jws).
I am using BEA Platform 8.1 sp2. I opened a case for this issue(482983) and
it is still being researched, so I thought I would see if anyone else reading
these newsgroups had some suggestions.
Hi Bob,
Yes, this is a known issue.
A bug report CR168591 has been created to address the issue. Engineering is looking
into it.
Let me know if you have any further questions.
Thanks a lot,
Vimala Ranganathan
"Bob H" <[email protected]> wrote:
>
Is anyone else having problems editing XQuery maps in WL Workshop? I
have created
my own schema and then use it to map the input parameters to internal
Java types
for a Web Service. The XQuery editor works fine the first time - that
is I bring
up the graphical editor and draw the lines to define the mapping. After
I close
the editor, I am unable to open up the map again. I get an XQuery Transformation
error as follows: "Failed to parse the XQuery after user edits". This
even happens
if I try to open a map in the BEA examples project (i.e. InputMapMultiple.jws).
I am using BEA Platform 8.1 sp2. I opened a case for this issue(482983)
and
it is still being researched, so I thought I would see if anyone else
reading
these newsgroups had some suggestions.
Similar Messages
-
Unable to edit Message Mapping
Hi Experts,
I have an issue where SAP has created some graphical message mapping in XI systems.I have to edit the messages
but it doesn't allow me to edit as the "Switch Between Display and Edit" button is disabled.Please let me know
the way how i can bring it to edit mode (or) if basis can do it please let me the procedure (or) if the prior
is not possible have to contact sap.
Thanks,
SudhansuSudhansu,
DO not edit or change the SAP standard SWC. I experimented it like this once and I had to re import it to roll back changes.
You are correct the warning is not usual for normal objects and do not change it under any circumstances
After changes are made and activated, if you try to roll back the history also, this symbol will not go
SAP will not support your product after these changes if you are endorsed or partnered with SAP
Do the following.
1. Make this as a dependent SWC in SLD. THen it will appeare under your local SWC
2. Here you can use to edit or change it.
Venkat. -
Unable to edit the document in sharepoint2010
Hi,
I am unable to edit the document in sharepoint2010 with IE-10 while editing i am getting the error like
"The form cannot be displayed in the browser because the use of session cookies has been disabled in the current browser settings.In order to load the form the session cookies must be allowed."
Please suggest me on this.
Thanks in advance.
Regards
SidduSekharHi SidduSekhar,
Based on your description, I need to verify the things below:
Which browser did you use? Did this issue occur with all the browsers?
Is the cookie disabled in the browser? If yes, please enable it.
Did you implement security fix in the web.config, such as <httpCookies requireSSL="true" httpOnlyCookies="true" />? If yes, please set it to false in web.config.
Did you configure Alternate Access Mapping for SharePoint with a URL containing a “_” character? If yes, please remove the “_” from the URL.
More references:
http://blogit.create.pt/miguelisidoro/2013/12/01/sharepoint-and-the-form-cannot-be-displayed-in-the-browser-because-the-use-of-session-cookies-error/
https://prasantabarik.wordpress.com/2014/05/03/sharepoint-2010-workflow-task-error/
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
SRM to MDM Scenario -- Unable to Edit the Integration Scenario
Hi Experts,
I'm doing a scenario in XI/PI from SRM to MDM.
I had downloaded all the related content from service market place and also established SLD connections as well.
When I'm trying to import the Integration Scenario from Integration Repository to Integration Directory I'm getting the follwing error.
Software component version with GUID 77891250-7da4-11d8-b240-e6890a114c15
does not exist (SWC_NOT_EXIST)
I'm unable to edit the integration scenario in IR even with PISUPER credentials which have all the access.
I'm also unable to edit any of the other objects as well (e.g.,Message Interface,Interface Mapping etc.,)
PFB the link where I pasted the error snapshot I'm getting when I'm trying to open the Integration Scenario in IR.
[http://picasaweb.google.co.in/prajwal24/MyScenario#5492932473682114498]
Can anyone please help me out on what can be done to edit the Integartion Scenario.
Thanks and Regards,
PruthviThanks kaushik and Salvi for your valuable inputs.
I have created a copy and now able to edit the Integration Scenario.
But again a new problem came up.
Now after editing the predefined scenario which has only SRM 5.0 and SRM 7.0
I need to add SRM 7.0 application component here in this Integration scenario and this was done successfully.
Now i need to add one send action and this send action is present in the SWC SRM SERVER IC 7.0.
I had downloaded the SRM SERVER IC 7.0 content already and I'm able to see in Integration Repository also.
But this SWC is not present in the application component SAP SRM (WITH SAP EBP) 7.0.
Please let me know what to do now inorder to add this send action in that application component.
Regards,
Pruthvi -
Unable to edit the forms in Adobe Acrobat 9 Pro and adobe pdf reader.
Hai ,
i am unable to edit pdf forms . on clicking on the form text field error message comes as "font capture" message heading and content as
"C:\Windows\system32/ATMLIB.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support."
if pressed ok . aplication get closed
i reinstalled all aplication with old versions but sill have the same error .please give a solution . thank you.thank you for the suggestion, but I do not have a "Send Email" or "Submit" button available in my version. I have "Attach to email" option which automatically opens a new message in MS outlook (which I did not set up, it just started doing so automatically) without any further dialogue boxes or options.
Also, this is only for regular PDF files, not forms. -
I am unable to edit an image in Photoshop.
I just installed Lightroom 5.3, and I have Photoshop CS5.1 installed. The problem is that I am unable to edit an image in Photoshop. When I click Photo>Edit In, the option for Photoshop is not active (i.e., it's not black), so I can't click on it. Why are the options for Photoshop and all of the other Photoshop related options, such as Merge to Panorama, etc., not active? In Preferences I have the following settings: File Format = TIFF; Color Space = ProPhotoRGB; Bit Depth = 16 bits; Resolution = 240; Compression = None. I am using Windows 7.
Chris:
I have to apologize for being misleading on my request for help in
resolving the problem.
Actually the version I am using is CS2 not CS3.
Yesterday I tried numerous times, and ways, to edit an image and each time
it refused to allow me to save it.
The software program just shut down. This evening when I decided to give it
another try it worked perfect.
Guess the program just took the day off.
Thank you for offering to help
Regards,
Doug -
Function Module "RSDRD_SEL_DELETION" / Unable to edit selection
Dear experts,
I am currently working on FM "RSDRD_SEL_DELETION". I am testing it in SE37.
However, when I try to enter selection I_THX_SEL, it tells me:
Unable to edit the object
Message no. MO704
Diagnosis
You tried to edit an object that cannot currently be edited using the editor for complex objects. Possible causes:
The object is an object reference
The object is a hashed table
The object list a string
The object has the type REF TO DATA
The object contains object references
The object contains hashed tables
The object is a string
The object contains strings
A subcomponent of the object has a width that exceeds 65,000 characters.
Can anyone tell me how to make it work?Sorry! The code was meant only as example, as I would convert it. The names of the infoObjects are naturally differently. It concerns to me rather the understanding whether the data records are deleted individually in each case. Or all those the conditions of <b>NUMBER</b> fulfill and all those the conditions of <b>DATE</b> fulfill. I would like to delete however only the data records, which fulfill these conditions together.
-
WebElements - Unable to edit WEPlatform
Hi,
I am new to WebElements and wanted to have a look at the functions to see how I can use in my reporting suite.
I am using CR11 and seem to be unable to edit the WEPlatform element to select the Crystal Reports version that I use.
I notice when I open the WebElements 246.rpt that it advises me that the report was written in a later version of Crystal.
Is this why I cannot edit the WEPlatform element ? If so how can I obtain a version of the web elements thjat will work with my Crystal version ?
Any help will be great.
Cheers,
Matthi Matt,
the users guide isn't really clear on this...i will make sure that this gets changed for the next release.
as webelements are Custom Functions you have to disconnect them from your repository to edit them. if you right click on the platform function and choose disconnect from repository then you can edit the function to match your platform.
once you've changed the function, you can add it back into your repository overwriting the existing one...that way when you build a new report using webelements you don't have to keep changing the platform function each time.
jamie -
I have a user with Outlook 2013 connected to an 2010 Exchange Server. I have a user that is unable to edit any existing contact, getting an error: Your changes cannot be saved because you don't have permission to modify some or all of the items in this folder.
Do you want to save a copy of this item in the default folder for the item?
I have checked the permissions on the mailbox folder as well as the Contacts folder. The user has "Owner" permission to these folders.
No other users report the problem, and loading the users account on another computer demonstrates the same problem.
Any ideas what I am missing?Hi,
The error indicates that the issue is related to permission. I recommend you use the Get-MailboxPermission -Identity xxx |fl cmdlet to check if the permission is right. What's more, please check if OWA has the same issue.
If the issue persists, I recommend you remove the owner permission at first. Secondly, use the following cmdlet to add the owner permission and check the result.
Add-MailboxPermission -Identity "xxx" -Owner "xxx"
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support -
Hi Team,
Lync 2013 client - part of Office 2013 Pro Plus - unable to edit or remove picture, option is grayed out.
Using Exchange 2010 Server and Lync 2010 Server at the back. To the best of my knowledge, this option is only available when using Exchange 2013 rather than Ex 2010.
Can somebody confirm this as I am not 100% sure about it.
Appreciate your help. Thanks
Muhammad Nadeem Ahmed Sr System Support Engineer Premier Systems (Pvt) Ltd T. +9221-2429051 Ext-226 F. +9221-2428777 M. +92300-8262627 Web. www.premier.com.pkHi,
The photo precedence in Lync 2013 is high-resolution photo from Exchange 2013 -> Photo from web address -> Active Directory photo. The "Edit or Remove Picture" button is available if you integrate Lync Server 2013 with Exchange 2013.
Since you are Lync server 2010 and Exchange 2010, you can choose the following two options:
The thumbnailPhoto attribute on the user's object in Active Directory Domain Services
A URL configured by the user
More details:
http://blogs.technet.com/b/nexthop/archive/2010/11/22/microsoft-lync-2010-photo-experience.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
I am a complete novice to Dreamweaver so please bear with me.
I am trying to edit some pages (.php files) for my employer. I was
able to edit the index.php file but none of the others. All of the
html code is greyed out except certain areas and unfortunately, the
part I need to change is greyed out. I am completely unable to edit
any of the greyed areas. I've looked all over to see if there's a
way to unlock the code but I can't see anything. Does anyone have
any suggestions?If you do not have the associated Template file, it *MAY* be
a trivial
matter to recreate it. We would need to see the code on the
page to know
whether that's possible, though.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Osgood" <[email protected]> wrote in
message
news:gecgtk$4g2$[email protected]..
> This sounds as though the page has been made form a
Dreamweaver template.
> Do you have a template folder in the site root folder at
all with a file
> named .dwt in it?
>
> You can unlock the greyed out area of a page by opening
it and
> going>Modify>Templates>Detach Template.
WARNING! WARNING! Doing this may
> help you in the short term but once detached if anyone
updates the
> original .dwt template file the changes WILL NOT
propagate to those pages
> that have been detached from the template.
>
> First look for the .dwt file. It should be in the site
root folder in a
> folder named Templates. Open it if you can find it and
make the changes
> there. All changes made, once saved, will propagate to
all pages in the
> site made from the template.
>
>
>
> gwnyvere wrote:
>> I am a complete novice to Dreamweaver so please bear
with me. I am
>> trying to edit some pages (.php files) for my
employer. I was able to
>> edit the index.php file but none of the others. All
of the html code is
>> greyed out except certain areas and unfortunately,
the part I need to
>> change is greyed out. I am completely unable to edit
any of the greyed
>> areas. I've looked all over to see if there's a way
to unlock the code
>> but I can't see anything. Does anyone have any
suggestions?
>> -
Unable to edit document using "Edit with Word" option
Hi All,
i am having an issue with Office web apps. i am using SharePoint 2013 and Office web apps 2013. all the configurations have been done successfully. but i have a different kind of issue.
i am able to open documents in browser
i am able to edit document using " edit with word/excel web" option
but i am unable to edit document using "edit with word/excel" option
i have Office 2010 installed on my local machine.
do we need to have MS office of 2013 version? or is there anything missing from configuration part.
Please help me.
Thank You,
Bhaskar.Hi,
According to your post, my understanding is that you could not use the "edit with word/excel" option.
I had tested the issue with the Office 2010, the option worked well.
You don’t need to install the Office 2013 to use this option.
What did you mean “but i am unable to edit document using "edit with word/excel" option
Did you mean the option gray out? Did the issue occur in other browsers?
You can use compatibility mode to check whether it works.
Open IE->Tools->Compatibility View Settings
You can also add the site into Trusted sites.
Open the IE->Internet Options->Security->Sites->add the site into the Websites, then check whether it works.
What's more, you can also use other browsers to check whether it works, such as Firefox, Chrome.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
Unable to edit ftpoutboundheader or fileadpateroutboundheader
Hi,
I am new bie to oracle soa suite. I was doing an excesise on file and ftp adapters.
As part of the excersise I have to edit the outbound header properties of the generated wsdl. I am unable to edit the headers.
1) Can we edit the headers generated by file/ftp adapter wizards ?
My SOA Suite: is of 10.1.3.4
Jdev version is 10.1.3.3
Thanks,
Arjun.Try this blog
http://middleware1.wordpress.com/category/adapters/page/2/
cheers
James -
Hi,
I downloaded an html file from our server to edit the logo. However, I am unable to edit the logo part. It's like commented out. And once I opened the file on Dreamweaver CS5, I am getting this pop-up message:
"This page contains some SWF objects that may not work properly in the most recent versions of Internet Explorer. Dreamweaver cannot convert them to the new SWF markups. Please delete each of them and insert again."
I can't edit the html file and change the logo. Please help.
Thank you and God bless!
DannieDannie,
Are you familiar with dreamweaver templates and editable regions? If the logo is in the template, then you need to modify the template file. The changes you make to the template will automatically be propogated to all of the files which use the template. If your html file uses a template, the html code will look like its commented out.
Also, you should not have to download the html fiile from your server because you should always keep a copy of all the html files on your computer.
I don't know about the SWF error.
Good luck.
mitzy_kitty -
Unable to open Information Map from planning web Help menu
Unable to open Information Map from planning web Help menu
The error is :
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.Hi,
It should be accessing :- http://<planning server>:8300/HyperionPlanning/help/en/hp_information_map/hp_information_map.html
Can you access that address on the machine hosting planning?
The file structure on the web server depending on which app server you use should be something like \Hyperion\deployments\Tomcat5\HyperionPlanning\webapps\HyperionPlanning\help\en\hp_information_map\hp_information_map.html
Cheers
John
http://john-goodwin.blogspot.com/
Maybe you are looking for
-
font color=red Create/Modify forms and triggers through C++ using OPEN API
<font color=red> Dear brothers/sisters<font color=darkblue> <br><br> Please help us to find the linking problem. <br> We have to add PRE-FORM trigger to many FMBies. We have thousants of FMBies. So opening one by one is difficult. For this we are usi
-
XML Publisher Enterprise 5.6.2 - World Sales report (DEMO)
Hello All; Does anybody have problem displaying "World Sales" report as HTML output under Sales Manager folder? The demo is provided when downloading and installing XMLP server. "World Sales" report uses an XML feed from a URL which I configure per t
-
IPod not properly ejected- now iTunes will not work - Help!
My friend had his ipod connected to my computer to charge. Conneceted through USB on a Dell/ Windows 2000 / system. He disconnected the ipod without properly ejecting it - Now, when i connect my ipod, iTunes will not recognize it- iTunes does not ope
-
Not able to see all the subject areas with BI Author and BI Consumer roes
Hi All, Recently we have upgraded to OBIEE 11G and we have created new users and assigned groups in the new 11G. Generally users sholud be able to see all the dashboards and subject areas with the default BI Author and BI Consumer roles. But in our 1
-
We are transferring our database from version 7 (on VAX) to version 10 (on 2003). Part of the checking mechanism is to select all data from all tables into spool files and compare the file contents. The initial test of the provided scripts didn't wor