Unable to email scans because of Avail

I am unable to email a scan document on new HP Deskjet 1512...reason:internet email accounts not supported. I use Gmail...is there a way around this?

Hi,
Scanning to Email directly from the HP Scan software require an email client software installed on your PC, it cannot connect to an Internet based interface such as Gmail.
You may download and install a free email client and set the Gmail account on it, there are several free mail clients such as Windows Live Mail or Mozilla Thunderbird  as example.
Once installing a such be sure to select to set it as the default email client, the installation should offer to do so.
Then set your Gmail account within the client and then you may select Scan to Email from the HP Software.
You may follow these steps to set up Gmail on Thunderbird:
http://www.guidingtech.com/2219/set-up-gmail-in-thunderbird/
And the following for Windows Live Mail:
http://www.freeemailtutorials.com/windowsLiveMail/setupEmailAccounts/setupGmailAccount.htm
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • After downloading Maverick I cannot save or email scans from my HP L7780. I receive  error message "An error has occurred saving the file because it could not be written to.  Check the properties for the file to make sure it is not read-only. "

    After downloading Maverick I cannot save or email scans from my HP L7780. I receive  error message "An error has occurred saving the file because it could not be written to.  Check the properties for the file to make sure it is not read-only.

    Read the user manual that came w/the scanner and/or contact HP Support.
    http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system 
    http://support.apple.com/kb/HT3669 Printer and scanner software available for download 
    A scanner driver you may wish to consider:  VueScan Scanner Software

  • Hi, I loaded an iTunes card and bought an audiobook a few weeks back! I was unable to download it because my wifi was down, my wifi has just been fixed but now my audiobook purchase is not available but the cash has been taken? Any ideas how to solve this

    Hi, I loaded an iTunes card and bought an audiobook a few weeks back! I was unable to download it because my wifi was down, my wifi has just been fixed but now my audiobook purchase is not available but the cash has been taken? Any ideas how to solve this

    When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive.  It would be a few months old so it wouldn't have the complete library on it....any ideas?  I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

  • HP Officejet 6600 and Outlook 2007 unable to send scan to email

    Hi,
    I am unable to scan (HP Officejet 6600) from my comuter to Outlook 2007.  I used to scan whatever I am scanning for the day from my HP Officejet 6600, and then I would see my scan finished then I would hit email scan. I would then recieve multiple errors.
    Here is the process; HP Scan (save) and then I get an error: The HP Scan application is unable to open your application and/or cannot attach the scan to a new email. Please check you email configuration and try again. I then select (Next) I select "OK," which then provides me with another error: This action is not supported while an older version of Outlook is running.
    Therefore, can somebody help me?
    Thank you,
    Joe Martinez

    Hi Joe,
    First, try reinstalling the latest HP software.
    From Programs and Features uninstall the HP Officejet 6600 Basic Device Software, next dowload and install the latest software below, then check for any difference:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-108845-4&cc=us&dlc=en&lc=en...
    If the issue remain ensure that Outlook is set as the default program.
    From the Control Panel select Programs, then Default Programs.
    Select Outlook 2007 from the left pane, ensure it shown as "Outlook have all its defaults", otherwise click the button to set all the defautls for outlook and check again.
    If there is still no change I suggest trying the Hotfix for outlook below, be sure to follow the entire Resolution Section:
    https://support.microsoft.com/en-us/kb/813745
    If there is still no change I recommend repairing Office / Outlook and check if that may help, otherwise you may need to Reinstall the software.
    You may follow the steps to repair Outlook 2007 below:
    http://www.companionlink.com/support/kb/Repair/Re-install_Outlook_2003,_2007,_2010
    Hope that may help getting the issue resolved,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I have placed an order (: AD016135648) and I am unable to reset my email address because I am not receiving an email with a temporary password.  I am not a fan of your website.  I'

    I have placed an order (: AD016135648) and I am unable to reset my email address because I am not receiving an email with a temporary password.  I am not a fan of your website. I'm 30 minutes into this which should have been a breeze.

    We are not Adobe. This is a user to user forum.  We are customers just like you.
    You need to contact Adobe:
    Contact | Adobe
    You may need to use the chat option.

  • HT4284 We are trying to open .mov files using Quick Time. It says that it is unable to open it because a codec is not available.  What do we need to do?

    We are trying to open and edit .mov files using Quick Time. It says that it is unable to open it because a codec is not available. What do we need to do?

    he knows his ID , if he did all whats in the link he can get his password back ?
    how can i make him call applecare ? is there a way to speak to them from jordan ??
    i have been trying to reach any1 in apple so they can communicate and help my friend (us) to make him remember it .
    am not asking for the password or trying to get into the phone without using it , and i can take my money back though i need to help my friend as well since now he cant use it as well.
    thanks kil

  • Mail v7.2 - unable to email myself to inbox, goes to sent?

    Fellow Applers!
    I upgraded to Mail v7.2 the other day - and now I cannot email myself to my inbox? The email I sent to myself goes to my 'Sent' folder - and then I have to drag it across to my Inbox.
    Is there a rule somewhere where Mail is automatically thinking the email to myself is a duplicate?
    It's useful for me to email myself documents as I can then pick them up on my iPhone and iPad at a later date.
    Anyone able to help?
    Many thanks.
    - Rory Skywalker

    HCRX
    iPhoto simply copies the photos to the library on import. It does not compress them in any way.
    I am unable to enlarge or edit the files in iPhoto. I am unable to export the files from iPhoto and now I am unable to email the pictures.
    This sounds like the actual photos are not available to iPhoto. How did go about changing from a managed to a referenced library?
    Select any of the affected pics in the iPhoto Window and Right Click on it. From the resulting menu choose 'Show File'. A Finder window will open. It should have the actual file selected. Does it?
    Regards
    TD

  • I can't download the Sandy Relief album that I pre ordered. Apple sent me an email saying it was available but when I try to donwload it I get a message saying I already have, which I have not.

    .Apple sent me an email saying it was available but when I try to donwload it I get a message saying I already did. I checked the store menu and it indicated that there is nothing available to download. I don't have the songs or the album showing in Itunes anywhere. Not sure what to do.

    Hi OverratedBacon,
    Thanks for using Apple Support Communities.  I would first try downloading the songs from your past purchases by following the appropriate steps here:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/ht2519
    If you're still unable to receive your preorder, you may want to report this to the iTunes Store:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/ht1933
    Cheers,
    - Ari

  • Unable to view scanned PDF files

    I registered for Adobe ExportPDF in February. Since then Adobe on my PC was upgraded, and now I am unable to view scanned PDF files. What can be done about this?
    Thanks
    Rika

    Hi David
    The update that was done in response to a prompt was done to 10.1.9. Something apparently went wrong, because when I uninstalled it and reinstalled 11.0.06 everything worked fine.
    Thanks
    Rika

  • Unable to burn DVDs because I renamed the drive the project and burn files are on. Please help.

    I am unable to burn DVDs because, not thinking, I renamed the external drive the project is on. How do I fix the problem in DVD Studio Pro 4? I changed the name back on the drive, the files show as linked, but it won't burn. I've tried to refresh the assets, didn't help. Relink is not available to try. I tried to go to file/advanced burn & build, but it was not available either. I'm new to all this so am very afraid to trash the preferences, not knowing if I'm going to do other harm.
    Thanks,
    Trish C

    Reimport the files and drop them into the project.
    Your links should work.
    x

  • Unable to resolve scan name to an ip address

    Hi All,
    I am installing 11gR2 on RHEL-4.
    My installing is getting on scan ip part.
    Its giving me an error that unable to resolve scan name to an ip address.
    I have put the scan ip entry in /ect/hosts file instead configuring using DNS.
    My /etc/hosts
    vi /ect/hosts
    127.0.0.1 localhost.localdomain localhost
    #public
    192.168.2.201 rac1.oracle.com rac1
    192.168.2.202 rac2.oracle.com rac2
    #private
    10.10.1.1 rac1-priv.oracle.com rac1-priv
    10.10.1.2 rac2-priv.oracle.com rac2-priv
    #virtual
    192.168.2.211 rac1-vip.oracle.com rac1-vip
    192.168.2.212 rac2-vip.oracle.com rac2-vip
    192.168.2.301 rac-scan.oracle.com rac-scan
    The same entry is for second node
    The installation should run anyways i am putting scan ip entry in /etc/hosts file
    Could you please let me know where i am going worng?
    Your assistance is much appreciated in this regards.
    Thanks and Regards,

    Hi
    Thanks for the help.
    I have installed 11gr2 on centos 4.5.
    During installation i configured 3 disk and selected normal redundancy.
    Please find the output of ocrcheck and asm disk.
    [grid@rac1 bin]$ ./ocrcheck
    Status of Oracle Cluster Registry is as follows :
    Version : 3
    Total space (kbytes) : 262120
    Used space (kbytes) : 2220
    Available space (kbytes) : 259900
    ID : 1931872859
    Device/File Name : +ocr_vote
    Device/File integrity check succeeded
    Device/File not configured
    Device/File not configured
    Device/File not configured
    Device/File not configured
    Cluster registry integrity check succeeded
    Logical corruption check bypassed due to non-privileged user
    [grid@rac1 bin]$ /etc/init.d/oracleasm listdisks
    OCRVOTE1
    OCRVOTE2
    OCRVOTE3
    I should able to see 3 disks for ocrcheck, While installing i selected normal redundancy and selected all the 3 disks.
    Could you please explain this.
    your assistance is much appreciated .
    Thanks and Regards,

  • I just bought a ipod touch. I am unable to use it because itunes tells me I have no internet connection (unknown error 306). I have tried all the suggestions I can find, including checking the firewall, the no proxy server is checked, resetting cache on i

    I just bought a ipod touch. I am unable to use it because itunes tells me I have no internet connection (unknown error 306). I have tried all the suggestions I can find, including checking the firewall, the no proxy server is checked, resetting cache on itunes, I even scanned the computer with Registry Easy but nothing worked.  I use Mozilla Firefox and have a PC with Windows 7. Obviously, buying a ipod and being unable to use it for 3 days (and counting) because I am unable to register it, is pretty frustrating. Can anyone help?

    Did you try all of this:
    iTunes Store loads partially or returns "Error 306" or "Error 10054"
    Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
    To address proxies, Remove Internet Options proxy settings and connect to the Internet without a proxy.
    To reset iTunes Store cache:
    In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences (PC).
    Click the Advanced tab.
    Click the "Reset cache" button.
    Click OK and see if the issue is resolved.
    Adjust Parental Controls in iTunes:
    Open iTunes.
    Access iTunes preferences:
    On a Mac: From the iTunes menu, choose Preferences.
    On a Windows PC: From the Edit menu, choose Preferences.
    Click the Parental Controls tab.
    Remove restrictions on Parental Controls.
    For more information on parental controls or content filtering software, see iTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
    For more information on other security software, see iTunes: Troubleshooting security software issues.

  • Unable to email iPhotos - v7.1.3 (364)

    I have had a number of problems ever since I agreed to place all of my photos in iPhoto. Previously I had a separate copy of the photos and then the iPhoto library link. To save space on my laptop I followed the instructions and iPhoto compressed the files.
    I am unable to enlarge or edit the files in iPhoto. I am unable to export the files from iPhoto and now I am unable to email the pictures.
    Any suggestions? The Mail icon pops up after I have selected the photos I want to email and then it closes, another window pops up so briefly I have no idea what it says and then nothing. There are no draft emails waiting for me in Apple Mail, nothing.

    HCRX
    iPhoto simply copies the photos to the library on import. It does not compress them in any way.
    I am unable to enlarge or edit the files in iPhoto. I am unable to export the files from iPhoto and now I am unable to email the pictures.
    This sounds like the actual photos are not available to iPhoto. How did go about changing from a managed to a referenced library?
    Select any of the affected pics in the iPhoto Window and Right Click on it. From the resulting menu choose 'Show File'. A Finder window will open. It should have the actual file selected. Does it?
    Regards
    TD

  • I have been unable to email photo's from elements 9

    I have been unable to email photo's from elements 9

    Are you on Win 7 and see the email window freeze? In such case, please follow the link.
    Also in case you are not finding Windows Mail listed (in PSE preferences) as a client in PSE then it might be because Windows mail is not configured on your system. First you would need to configure it and then it would show up in PSE Organizer Preferences>Sharing.
    Regards,
    vaishali

  • I am getting disc full messages on my Mac, unable to empty trash because not enough space, how do I proceed or do I need to increase my 4gig of memory

    I am getting disc full messages on my Mac, unable to empty trash because not enough space, how do I proceed or do I need to increase my 4gig of memory in which case how do I go about this process.

    You are confusing RAM (Random Access Memory) with hard drive data storage space.
    Your hard drive storage is getting too full if you can't empty your Mac's main trash.
    Here are some general tips to keep your Mac's hard drive trim and slim as possible
    You should never, EVER let a conputer hard drive get completely full, EVER
    With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
    If it does, it's time for some hard drive housecleaning.
    Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
    Have you emptied your Mac's Trash icon in the Dock?
    ( as you mentioned, you can't empty this as your hard drive is too full.)
    If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
    If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
    If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
    Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
    Look through your other Mailboxes and other Mail categories to see If there is other mail you can archive and/or delete.
    STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
    Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
    Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
    Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
    To find other large files, download an app called Omni Disk Sweeper.
    Download an app called OnyX for your version of OS X.
    When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
    Typically, iTunes and iPhoto libraries are the biggest users of HD space.
    move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
    If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
    Good Luck!

Maybe you are looking for

  • My Adobe Flash CS5.5 did not work while it is opening a .fla with big size

    This is a very serious trouble... I have a .fla with 101MB. I always use this file and there is no problem on opening this file before. This morning , I found that while I am opening the file, Flash did not work. It said Adobe Flash CS5.5 stop runnin

  • MacBook Pro iPhoto and Mail

    My new MacBook Pro with Retina Display 13" really stucked me out. There is an update of 1.2gb of iPhoto 11 but as I leave my mac for the whole night process, error occured. I have tried this 3x and the same thing happened

  • PSE not communicating with printer.

    I have PSE 11 on a Windows 7 PC printing to an Epson XP850. After months of successful printing the printer kept reporting a communication error and would not print from PSE but does so from other programmes. It looked as if PSE all of a sudden wante

  • Using Lightroom and Indesign CS5

    Hi, I used in the past Indesign CS3 to create a book.  It went fairly well.  that was before I started using Lightroom, which now holds my complete catalogue, edits, etc. I've recently proceeded to create Collections in Lightroom for three books I wa

  • Upgrading to Snow Leopard - Memory Question

    Hello, I am currently in the process of upgrading my macbook to snow leopard and I want to make sure I get the right kind of ram. I currently have 512 mb of ram and hope to increase this to at least 1 gb. I am not sure what generation my macbook is,