Unable to enable connections to deluge
Hello there arch users!I'm a n00b of arch linux and i have a question:
I have a laptop connected via ethernet cable and am trying to download torrents but i get no incoming connections error!
I installed deluge using this guide:
https://wiki.archlinux.org/index.php/Deluge
Please share with me your knowledge!
Hello riddle and thanx for your answer!I'm sure that my torrents has seeds/peers!
Here's the thing i tried twice to download a torrent with transmission; the first time it stopped at 61% ,the second at 17% and the third time it downloaded successfully!But now that it's finished it won't stay connected to seed!It says:
"Tracker gave an error: Connection Failed"
Does this mean that this is pirate bay's problem?
Also,how can i check if my ports are working properly?
And finally do you know how can i make deluge work?
Thanx again for your quick reply!
Similar Messages
-
Unable to enable in web services using direct cable from my router
LaserJet Pro printer is working. Unable to enable in web tab error message: Connection error. Check Internet connection.
I have internet connection and don't use proxy server. I have powered off both printer and router. Thank you.Hello! Could you please provide more information regarding the issue, such as which laserjet you are using? Any additional information will be helpful in resolving your issue. Thanks!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal. -
JUnable to enable SPDIF? X-Fi XtremeGamer (non-PRO) w/ Digital I/O Module? I recently purchased the Digital I/O module in order to use SPDIF Out on my X-Fi XtremeGamer in order to send audio to my 5. receiver via digital coax.
However after hooking up my Digital I/O module to the flexijack (the one with the red light) I am unable to enable SPDIF.
I read and followed the directions listed here:
<a rel="nofollow" href="http://support.creative.com/kb/ShowArticle.aspx?sid=64440"]http://support.creative.com/kb/ShowArticle.aspx?sid=64440[/url]
The options that they tell you to set are simply are not there on my system.
I am running the most current drivers and console launcher that Creative has on their website.
I have been trying to get it to work both under Windows XP and Windows 7.
I have spent the last 3 hours beating my head on a wall, I hope someone can help me with this...
Thanks in advance for any suggestions!Ah that's what I am afraid of.
Quoted from the article in your message: "For SB073X series : Supports Microphone-in, Line-in and Optical out connections. On a SB073X series card, this jack does not have the Digital-in function to support the Digital I/O Module. It does however connects to external digital audio devices that accept stereo PCM or compressed Dolby Digital/DTS Bitstream from the Optical output. This will require using a "Toslink to Mini Toslink" cable for connection only." -
DirSync + PwdSync - Passwords not syncing, error 611 Unable to open connection to domain
Hello Everyone.
I've installed and configured DirSync with Password Sync (PwdSync) in a forest with 4 domains.
I'm using the most recent DirSync installation at the date of this post, 6475.0007.
The domain structure is
Parent Domain
- Child Domain 1
-- 'Grand' Child Domain 1
- Child Domain 2
I am successfully syncing users from Child Domain 1 only. I'm using container filtering to sync only 1 selected OU at this stage while I'm testing before deployment.
User's in the selected OU are syncing and AD details are correct. To filter out the domains I didn't want to sync, I had to create an empty OU in each domain and select to sync it. Also in each domain I had to create an account with the
same username and password as the Enterprise account I set up for DirSync.
I enabled Password Sync while using the Windows Azure Active Directory Configuration tool.
After a full sync I receive a 611 error in the Application Log, source Directory Synchronization.
Password synchronization failed for domain: child1.domain.com . Details:
Microsoft.Online.PasswordSynchronization.SynchronizationManagerException: Unable to open connection to domain:
child1.domain.com .
Error: There was an error creating the connection context. ---> Microsoft.Online.PasswordSynchronization.DirectoryReplicationServices.DrsException: There was an error creating the connection context. --->
Microsoft.Online.PasswordSynchronization.DirectoryReplicationServices.DrsSecurityException:
RPC Error 5 : Access is denied. Error creating DRS context handle.
It appears that it's not enough to tick the box to enable Password Sync.
I got a successful sync only after I did the following:
On the DirSync server, opened C:\Program Files\Windows Azure Active Directory Sync\DirSyncConfigShell.psc1
Run the command Enable-MSOnlinePasswordSync
Log in with the Enterprise Admin credentials for the forest
Run the command Start-OnlineCoExistenceSync to begin a sync
I verified the password sync worked successfully with my synced users.
Maybe I missed something in the instructions but I only tried this after reading a blog post by Jethro Seghers. Thanks Jethro!Your 4 steps are essentially already included during the normal setup wizard process, with the exception of #3. Because DirSync runs as a service, you logging in to windows as an enterprise admin is not required. It is possible however that
there were replication or other delays in your multi-domain environment.
Mike Crowley | MVP
My Blog --
Planet Technologies -
Unable to Enable Maintenance Mode
This is my new challenge. I am unable to enable the maintenance mode. Following is the error message taken from adadmin.log. At the same time when I issue the command to enable it, there is core dump in the alert log and this is what it says. Please help me troubleshoot this issue.
Errors in file /oraadmin/SID/udump/SID_ora_7943.trc:
ORA-07445: exception encountered: core dump [kopxccc()+92] [SIGSEGV] [Address not mapped to object] [0x000000062] [] []
Change Maintenance Mode
Maintenance Mode is currently: [Disabled].
Maintenance mode should normally be enabled when patching
Oracle Applications and disabled when users are logged on
to the system. See the Oracle Applications Maintenance
Utilities manual for more information about maintenance mode.
Please select an option:
1. Enable Maintenance Mode
Please select an option:
1. Enable Maintenance Mode
2. Disable Maintenance Mode
3. Return to Main Menu
Enter your choice [3] : 1
sqlplus -s &un_apps/***** @/apps/tcfsmgr2/tcfscdi1appl/ad/11.5.0/patch/115/sql/adsetmmd.sql ENABLE
declare
ERROR at line 1:
ORA-03113: end-of-file on communication channel
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
memory exhausted
ORA-24323: value not allowed
Error accessing package DBMS_APPLICATION_INFO
ERROR:
ORA-03114: not connected to ORACLE
memory exhausted
memory exhausted
An error occurred while running adsetmmd.sql.
Continue as if it were successful [No] : No
aiimToggleMaintenanceMode():Error while calling aiucm3().
AD Administration error:
Unable to Enable Maintenance Mode.Yes, I was able to enable it from the backend;
SQL> @/apps/tcfsmgr2/tcfscdi1appl/ad/11.5.0/patch/115/sql/adsetmmd.sql ENABLE
PL/SQL procedure successfully completed.
Commit complete.
I am quite sure it did not work when it tried last night.
Let me try to do it using adadmin again. May be issue is no longer an issue. -
Following the documented steps to enable CIFS acceleration, but for some reason I am unable to enable the "enable core server" option (same applies to "edge server".
Am I missing something ?
Please advise,
SijbrenSijbren,
If you are using WAAS 4.1.x and using CIFS AO, you don't need core and edge services, just enable the AO for CIFS acceleration.
If you are using WAAS 4.0, then enable the CIFS edge/core services via the GUI. If you are using legacy mode in 4.1, then you need to have the CIFS AO disabled before you can enable the edge or core services. Once edge and core services are enabled, then you can create connectivity directives.
However, I recommend you use the transparent cifs acceleration in the new CIFS AO in 4.1, it's easier to setup and takes advantage of bi-directional acceleration.
Hope that helps,
Dan -
HP Photosmart Plus B210 unable to enable web service
I just moved this printer from one location to another. I have the printer connected to the network - but I am unable to enable web services. I just keep getting a Service Connection Error that says "There was a problem connecting to the Server."
I've looked for solutions on the HP site - but none of them have worked for me.
Any help is greatly appreciated!
LuAnn
This question was solved.
View Solution.Hi again LuAnn_Freund,
Try the same steps that eunicerocksify suggested, but try these DNS settings;
Primary DNS Server = 209.244.0.3
Secondary DNS Server = 209.244.0.4
If those do not work, I would suggest speaking with HP's Cloud Support Team to get this issue looked at first hand by an agent that can log onto your computer. I understand that you are posting on the Forums for a reason, but since you only have today remaining to work on a resolution, speaking with them would be best.
Please call HP’s Cloud Services at 855-785-2777. If you live outside the US/Canada Region, please click the link below to get the support number for your region, click HERE to find the Technical Support number for your country/region.
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
Unable to Create Connection ( Connection error DA0005) in DESKI 3 TIER
Hi ,
I have strange error of connection in DESKI 3 Tier.
Work Flow:
=> Wanted to create a deski report in Three Tier( from Infoview) using specific universe.
=> When I ran query it gives me error saying Connection error DA0005( Unable to create connection)
Work around did
=> Created Webi report using same univerese reprort ran fine.
The connection is there on enterprise I don't know whats going wrong.
Can any one help me with this error
Neo.Hi Experts ,
Any suggestions on this please
Environment : BOXI 3.1 SP3 , OS: AIX , APPS: WAS7, DB Trying to connect is DB2 -
I am unable to fully connect to a wireless hot spot with Z10
I am unable to fully connect to a wireless hot spot at work with my z10. We use Cisco access points. Once connected to the AP, users are redirected to https://2.2.2.2/login.html this page allows users to type a username and password and then click a button to gain full Internet access. Using the z10 to connect to the AP redirects me to the secure page but then throws the error:
"Site Identity Not Verifiable"
I then select Expand to continue and am able to add the site as an exception but then I get asecond error:
"Unknown network error 3RFINA".
I believe it's most likely due to the self-signed cert that the AP is using to secure the http traffic. I use to see this issue on my previous blackberry devices and playbook prior to some recent OS updates, but I am not sure what the exact fix was. If you try to accept the error and there no prompt to install the cert as seen on my previous devices.
I am able to connect to the same AP with my laptop, Playbook, and Bold 9900, iPod and android devices without issue. Has anyone seen this before? Any ideas? Since the AP is not mine I am really looking for a transparent client-side solution.
ThanksSame here...
I guess the problem is invalid certificate in web authlogin page.
Even when I add a excepetion, I still geting this same error 3RFINA.
I remember when I had Android 1.6 I receive similar error, but when upgraded to 2.1 the errors was gone and I was able to authenticate in wifi connection here in that government build.
Now, when I came to BB Z10, I a kind of disapointed to get same error. I now its concern by security and the guilty in that history probably is IT who admin this network for using a invalid certificate (the validation date appears in browser is a kind of funny... says its valid from 2027 to 2039) -
My corporate database wizards have created a login for my small subsidiary to use to read selected data from the HR database. It's meant to be used by an SSIS package to bring over data on who's a current employee and who's not.
The package has started returning connection errors, and when I try to log into the HR database via SSMS using this login I get the following message:
"Unable to apply connection settings. The detailed error message is" 'NoCount' is not a recognized option."
If I click on OK I can still log in, but it looks like this error is causing SSIS to produce an error. I've seen articles on vaguely similar errors logging onto an Azure database, but this one's on SQL Server 2012.
Anybody got any ideas? Is there something I can change at my end, or is it a change that has to be made in the remote DB?I'm getting confused seeing this
The package has started returning connection errors, and when I try to log into the HR database via SSMS using this login
I get the following message:
Whats the purpose of SSIS package if you're trying to connect to DB using SSMS?
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Unable to establish connection to R/3
Hi,
We have just installed XI and done all configurations.
I am doing one example ( connection r/3 to legacy system ) . When I open I outbound object in Integration Repository and in Imported objects when right click on IDocs and click Import SAP Objects, it asks me for SAP logon details , but when I try to connect it shows an error
Unable to establish connection to R/3 system 133.136.233.170 (system=00, client=110) Troubleshooting tips:
Is the target system online?
Check the connection data (note that server names and groups are case-sensitive)
Tips for administrators (see the configuration guide for more details):
Does the user have the required authorizations in the target system?
Is the target system configured correctly in "etc/services"?
I am putting IP address in application server and checked the system number as well.
I am able to ping From webas to R/3.
can anybody help me out what could be the error
Thanks
RekhaHi Rekha,
did you take a look at this page?:
http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/content.htm
you can find sap notes - if you're expiriencing problems with idoc import (SAP Notes 677732 (authorizations), 672745 (missing function modules), 212011 (access to IDoc metadata), and 718320)
also "Authorizations Required to Import from Systems Based On SAP Web Application Server"
take a look at this page
and read if carefully it may help you with your problem:)
Regards,
michal -
Can someone help me resolve this error? Thanks
Windows Server 2008 R2 Standard SP1 64-bit - SQL Server 2008R2 Standard 64-bit
VMware vCenter Server Version 5.1.0
SQLState = 08001, NativeError = 0
Error = [Microsoft][SQL Server Native Client 10.0]Client unable to establish connection due to prelogin failure
bcp program:
bcp SYM.dbo.ACCOUNT in "D:\Data\SQLExtract\EXTRACT.ACCOUNT" -f"D:\Data\SQLCommands\FMT.ACCOUNT" -S DEV-DATA\TEST\ -T -oSYMLOAD.LOG Type SYMLOAD.LOG >> SYMLOAD.LOG.CUMULATIVE
The bcp program executes successfully on a local instance of SQL Server.The error has nothing to do with BCP as such, but it is a connection problem. That is, for some reason you cannot connect to your instance from the VM. I would exect that you face a similar problem if you tried SSMS.
It could be a firewall issue, but prelogin suggests that you reach the instance. But possibly you don't come far enough for the login failure to be recorded. Possibly the instance is not configured to audit login failures.
The message you would see would be similar to
2010-08-18 14:11:30.91 Logon Error: 17809, Severity: 20, State: 3
Possibly followed by a a line that details the message. The error number may be different.
Erland Sommarskog, SQL Server MVP, [email protected] -
I am in the process of doing a migration from SBS 2003 std. edition to SBS 2011 std. I am at the point the migrating mailboxes from the Exch 03 server to the Exch 2010 server. I initially received an error when selecting mailboxes that the mailbox
db on the Exch03 server did not exist. I followed the resolution steps from another forum post to add the Exch 2010 server to the "first administrative group" via the security tab and give full permissions. This solved that issue and
I was able to proceed through the wizard to actually create the local move request. However, after processing the request, I get the following error...
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:03
<username>
Failed
Error:
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
MapiExceptionLogonFailed: Unable to make connection to the server. (hr=0x80040111, ec=1010)
Diagnostic context:
Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters: 4
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: <Exch03server>.<domainname>.local
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -545057711
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662
Lid: 45169 StoreEc: 0x824
Lid: 44273
Lid: 59431 EMSMDB.EcDoConnectEx called [length=114]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
Lid: 56945
Lid: 59431 EMSMDB.EcDoConnectEx called [length=114]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
Lid: 59505 StoreEc: 0x3F2
Lid: 52465 StoreEc: 0x3F2
Lid: 60065
Lid: 33777 StoreEc: 0x3F2
Lid: 59805
Lid: 52209 StoreEc: 0x3F2
Lid: 19778
Lid: 27970 StoreEc: 0x3F2
Lid: 17730
Lid: 25922 StoreEc: 0x3F2
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&t=exchgf1&e=ms.exch.err.ExC2B9A8
Exchange Management Shell command attempted:
'<domainname>.local/MyBusiness/Users/SBSUsers/<username>' | New-MoveRequest -TargetDatabase 'Mailbox Database 2011012823'
Elapsed Time: 00:00:03
I have tested running the command from the EMS and get the following...
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
+ CategoryInfo : NotSpecified: (0:Int32) [New-MoveRequest], RemoteTransientException
+ FullyQualifiedErrorId : AC277C79,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest
On the Exch03 Server I have verified/tested/done the following:
--Verified the Information Store Service is running
--Tested restarting the service
--Verified the Mailbox store is mounted
--Tested Dismounting and mounting
--Tested the Exch2010 mailbox db store is functioning properly by creating a test account and verifying w/ OWA.
--Verified routing group b/w servers
--verified network connectivity b/w servers
--Verified DNS is functioning properly on both servers
--Installed Exchange Server MAPI Client and CDO 1.2.1 on Exch2010 server.
--Tested rebooting both severs
I am at a loss. Any ideas would be greatly appreciated. I am unable to continue w/ the migration until I get past this step.Hi,
Thank you for sharing the resolution.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Thanks Gen Lin-MSFT -
Using JTA enabled connection in a JSP/servlet without transaction
Can we use a JTA enabled connection in a JSP/servlet without any transaction?
ThanksThis might be helpful.
http://java.sun.com/blueprints/guidelines/designing_enterprise_applications_2e/transactions/transactions6.html -
Unable to open connection error
Hi All,
I have a report that is connecting to two ODBC DSN connections. Using Crystal Reports 2008 it opens fine and generates reports (we did this even on the Crystal Server using CR 2008).
When we load this report onto the Crystal Reports Server 2008 Server and try to open it using InfoView, it gives a message "Unable to open connection". Does anyone have any ideas to get it to work on the CR Server 2008? It is a very basic report with 2 ODBC connections. The driver for the ODBC connection is installed on the Server and was tested successfully with Crystal Reports just not with Crystal Reports Server 2008.
Thank you in advance.Used System DSN instead of User DSN
Maybe you are looking for
-
One vendor -payments to be made from two house banks
Hi In our company code, we have a vendor who supplies two kinds of materials, let us say hardware and stationery items. For the supply of hardware materials, I have to pay him from one house bank and for the supplies of stationery, I have to pay him
-
Macs or mac mini work with blu ray external drives even XL DISC CAPACITIES
macs or mac mini work with blu ray external drives (BURNERS) even XL DISC CAPACITIES like 128GB?
-
Upgraded both computers in the household and found Lion is too disruptive to workflow. Do I turn in the new laptop for a pre-Lion rebuild to keep Snow Leopard, or do I return new computer and get upgraded memory to improve performance of existing Ma
-
Want to put graphics inside my Text
I want to do a traveling matte like you can do in FCP, in which I have text that's filled with an image that I have on another layer. I don't want to see the other layer as background, only inside the text. I've been playing with Primatte RT, but it
-
When apple says "we backup EVERYTHING" what exactly is everything?
I am recently having minor issues with my mac (undetected clicks, laggy or weak video (expose) and many others, nothing too annoying). I am aware that computers slow down after some time because the installing and uninstalling of applications and the