Unable to enable in web services using direct cable from my router

LaserJet Pro printer is working. Unable to enable in web tab error message: Connection error. Check Internet connection.
I have internet connection and don't use proxy server. I have powered off both printer and router. Thank you.

Hello! Could you please provide more information regarding the issue, such as which laserjet you are using? Any additional information will be helpful in resolving your issue. Thanks!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Similar Messages

Unable to enable HP Web services for my HP Laserjet 200 color MPF M276nw

Kindly assist, I have tried updating firmware, but still my web services wont enable.
Rgs
G
This question was solved.
View Solution.

Hi GayleneC,
Thank you for the update and additional information. I truly appreciate it.
You indicated that you tried to update the firmware, I’m wondering since the printer isn’t connecting to web services that it might not have connected to check for firmware updates. I’ve included two links, one is for the Windows version of the HP LaserJet Pro Series Firmware Update Utility the other is for the Mac version of the HP LaserJet Pro Series Firmware Update Utility. Please choose the one for your operating system and let’s try and update the firmware without using the front panel of the printer.
After running the firmware update utility, please disable the IPv6 wireless through the embedded web server. Please follow the steps below:
To open the HP Embedded Web Server, type the product IP address into the address line of a Web browser. When it opens it should look like the screen shot below.
Please click on the ‘Network’ tab as highlighted in the screen shot above.
Please click on ‘Advanced’ in the left hand side menu as shown above. Please uncheck IPv6 and click on ‘Apply’.
Please click on the ‘HP Web Services’ tab.
Please click on the ‘Enable’ button. The Web Services information sheet should print.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Not able to call BPEL web service using RMI call from different machine

Hi,
1. I have created a smiple Helloworld asynchoronous BPEL process
2. I am able to call that BPEL process using java program (RMI call) which I have written in JDeveloper 10.1.3.3 and the java program is running in the embeded OCJ4 instance of JDeveloper sucessfully.
3. Now I am trying to run the same Java program in my unix machine where oracle application is installed.
4. I have set all the CLASSPATH for required jars which I have used in JDeveloper and also kept the jar file in Unix machine.
5. The java codes are complied successfully.
6. But when I am trying to run it , getting the following exception:
bash-3.00$ java HelloworldAsyn
name is Debkanta
property file data are: {java.naming.provider.url=opmn:ormi://172.18.19.169:6003:home/orabpel, java.naming.factory.initial=com.evermind.server.rmi.RMIInitialContextFactory, orabpel.platform=ias_10g, java.naming.security.principal=oc4jadmin, java.naming.security.credentials=welcome1}
hello3
java.lang.Exception: Failed to create "ejb/collaxa/system/DeliveryBean" bean; exception reported is: "javax.naming.NameNotFoundException: ejb/collaxa/system/DeliveryBean not found
at com.evermind.server.rmi.RMIClientContext.lookup(RMIClientContext.java:52)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at com.oracle.bpel.client.util.BeanRegistry.lookupDeliveryBean(BeanRegistry.java:279)
at com.oracle.bpel.client.delivery.DeliveryService.getDeliveryBean(DeliveryService.java:250)
at com.oracle.bpel.client.delivery.DeliveryService.post(DeliveryService.java:174)
at com.oracle.bpel.client.delivery.DeliveryService.post(DeliveryService.java:149)
at HelloworldAsyn.main(HelloworldAsyn.java:64)
at com.oracle.bpel.client.util.BeanRegistry.lookupDeliveryBean(BeanRegistry.java:293)
at com.oracle.bpel.client.delivery.DeliveryService.getDeliveryBean(DeliveryService.java:250)
at com.oracle.bpel.client.delivery.DeliveryService.post(DeliveryService.java:174)
at com.oracle.bpel.client.delivery.DeliveryService.post(DeliveryService.java:149)
at HelloworldAsyn.main(HelloworldAsyn.java:64)
bash-3.00$
I need to solve it urgently. Can anyone please help me.
Is it relaed to some user access issue in unix?
Thanks & Regards
Deb
Message was edited by:
user587916

actually , I have laready given print stataement for the data in the context property file that you can see in the output. Today I am also able to call the bpel process using the same java program from my DOS command promt(cmd). Don't understand why the problem is occuring in unix.
please help.

Unable to pass xmlbeans object in weblogic web services using OEPE

Migrating Weblogic web services from Weblogic Workshop 10.3 to Oracle Enterprise for Eclipse...Passing xmlbean generated types in arguments of webservice call
How to work around the following errors? I do not have this error when in workshop 10.3 only in OEPE eclipse
"oracle.eclipse.tools.webservices.compiler.CompilationException: Errors: JAX-WS web services must not have xmlBean parameter or return type"
PLease note that I want DocType to be xmlbeans generated or inherited from org.apache.xmlbeans.XmlObject....
@WebMethod
     public void upload(String filename, DocType doc) {
Hi, I have legacy codes from Weblogic workshop 10.1 and 10.3.....
I am able to compile and run in Weblogic workshop 10.3 by passing the xmlbean generated DocType as arguments in the web services call.... but why am I not able to do this in Oracle Enterprise for Eclipse OEPE......
If I were to generate the web service from teh wsdl...it will generate it's own DocType.class in the jar files and not use the xmlbean generated class one....
How to get iOEPE to generate the classes in build\jws\ for
testWSService-annotation.xml
weblogic-webservices.xml etc like in workshop
How can I resolve this??? Am I stuck with Workshop on this?? How to work around??
Any help or clarifications would be much appreciated.
Inside testWS.java,
package ws;
import java.io.File;
import javax.jws.*;
import org.example.doc.DocType;
@WebService
public class testWS {
     @WebMethod
     public void upload(String filename, DocType doc) {
          try {
               doc.save(new File(filename));
          catch(Exception e) {
               System.out.println(e);
Inside xmlbeans generated DocType.java.....and DocTypeDocuments.java
* XML Type: DocType
* Namespace: http://www.example.org/doc
* Java type: org.example.doc.DocType
* Automatically generated - do not modify.
package org.example.doc;
* An XML DocType(@http://www.example.org/doc).
* This is a complex type.
public interface DocType extends org.apache.xmlbeans.XmlObject
public static final org.apache.xmlbeans.SchemaType type = (org.apache.xmlbeans.SchemaType)
org.apache.xmlbeans.XmlBeans.typeSystemForClassLoader(DocType.class.getClassLoader(), "schemaorg_apache_xmlbeans.system.testWSTypeSystem").resolveHandle("doctypec217type");
* Gets the "element1" element
java.lang.String getElement1();
* Gets (as xml) the "element1" element
org.apache.xmlbeans.XmlString xgetElement1();
* Sets the "element1" element
void setElement1(java.lang.String element1);
* Sets (as xml) the "element1" element
void xsetElement1(org.apache.xmlbeans.XmlString element1);
* Gets the "element2" element
java.lang.String getElement2();
* Gets (as xml) the "element2" element
org.apache.xmlbeans.XmlString xgetElement2();
* Sets the "element2" element
void setElement2(java.lang.String element2);
* Sets (as xml) the "element2" element
void xsetElement2(org.apache.xmlbeans.XmlString element2);
* A factory class with static methods for creating instances
* of this type.
public static final class Factory
public static org.example.doc.DocType newInstance() {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().newInstance( type, null ); }
public static org.example.doc.DocType newInstance(org.apache.xmlbeans.XmlOptions options) {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().newInstance( type, options ); }
/** @param xmlAsString the string value to parse */
public static org.example.doc.DocType parse(java.lang.String xmlAsString) throws org.apache.xmlbeans.XmlException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( xmlAsString, type, null ); }
public static org.example.doc.DocType parse(java.lang.String xmlAsString, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( xmlAsString, type, options ); }
/** @param file the file from which to load an xml document */
public static org.example.doc.DocType parse(java.io.File file) throws org.apache.xmlbeans.XmlException, java.io.IOException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( file, type, null ); }
public static org.example.doc.DocType parse(java.io.File file, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException, java.io.IOException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( file, type, options ); }
public static org.example.doc.DocType parse(java.net.URL u) throws org.apache.xmlbeans.XmlException, java.io.IOException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( u, type, null ); }
public static org.example.doc.DocType parse(java.net.URL u, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException, java.io.IOException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( u, type, options ); }
public static org.example.doc.DocType parse(java.io.InputStream is) throws org.apache.xmlbeans.XmlException, java.io.IOException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( is, type, null ); }
public static org.example.doc.DocType parse(java.io.InputStream is, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException, java.io.IOException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( is, type, options ); }
public static org.example.doc.DocType parse(java.io.Reader r) throws org.apache.xmlbeans.XmlException, java.io.IOException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( r, type, null ); }
public static org.example.doc.DocType parse(java.io.Reader r, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException, java.io.IOException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( r, type, options ); }
public static org.example.doc.DocType parse(javax.xml.stream.XMLStreamReader sr) throws org.apache.xmlbeans.XmlException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( sr, type, null ); }
public static org.example.doc.DocType parse(javax.xml.stream.XMLStreamReader sr, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( sr, type, options ); }
public static org.example.doc.DocType parse(org.w3c.dom.Node node) throws org.apache.xmlbeans.XmlException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( node, type, null ); }
public static org.example.doc.DocType parse(org.w3c.dom.Node node, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( node, type, options ); }
/** @deprecated {@link org.apache.xmlbeans.xml.stream.XMLInputStream} */
public static org.example.doc.DocType parse(org.apache.xmlbeans.xml.stream.XMLInputStream xis) throws org.apache.xmlbeans.XmlException, org.apache.xmlbeans.xml.stream.XMLStreamException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( xis, type, null ); }
/** @deprecated {@link org.apache.xmlbeans.xml.stream.XMLInputStream} */
public static org.example.doc.DocType parse(org.apache.xmlbeans.xml.stream.XMLInputStream xis, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException, org.apache.xmlbeans.xml.stream.XMLStreamException {
return (org.example.doc.DocType) org.apache.xmlbeans.XmlBeans.getContextTypeLoader().parse( xis, type, options ); }
/** @deprecated {@link org.apache.xmlbeans.xml.stream.XMLInputStream} */
public static org.apache.xmlbeans.xml.stream.XMLInputStream newValidatingXMLInputStream(org.apache.xmlbeans.xml.stream.XMLInputStream xis) throws org.apache.xmlbeans.XmlException, org.apache.xmlbeans.xml.stream.XMLStreamException {
return org.apache.xmlbeans.XmlBeans.getContextTypeLoader().newValidatingXMLInputStream( xis, type, null ); }
/** @deprecated {@link org.apache.xmlbeans.xml.stream.XMLInputStream} */
public static org.apache.xmlbeans.xml.stream.XMLInputStream newValidatingXMLInputStream(org.apache.xmlbeans.xml.stream.XMLInputStream xis, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException, org.apache.xmlbeans.xml.stream.XMLStreamException {
return org.apache.xmlbeans.XmlBeans.getContextTypeLoader().newValidatingXMLInputStream( xis, type, options ); }
private Factory() { } // No instance of this class allowed
Edited by: user11079482 on Jan 1, 2010 2:09 AM

Ok just as I expected. So I guess I am left with the following two options
1) either I switched to using JAXB in my apps instaed of xmlbeans....
2) or if I still wanna use the old JAX-RPC web services to deploy on the Weblogic 10gR3 server i will have to create my own ant task jwsc directly......as shown below in your docs
Programming Web Services for WebLogic Server (ant tasks)
http://download.oracle.com/docs/cd/E13222_01/wls/docs92/webserv/anttasks.html
Getting Started With WebLogic Web Services Using JAX-RPC
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/webserv_rpc/index.html
Will OEPE be supporting the old JAX-RPC anytime in the near future release? or have to create own build ant task to call jwsc ant task directly to compile JAX-RPC web services??

I keep getting "unable to connect to web services" when attempting to use them.

I purchased an HP Envy 114. I have connected to the network and am able to print from mulitple computers with no problem. When attempting to connect and authorize web services it asks me to accept the terms, then "checking for product updates". It always comes back saying "Unable to connect to web services. Confirm internet access and try again.". I have set up the wireless and it diesplays the IP Address and Network name. I'm not sure what else to try at this point. There is no help after that, I just keep getting sent in circles.
This question was solved.
View Solution.

Hello davidarmstrong.
Try replacing the DNS server's IP address to 8.8.8.8 and 8.8.4.4.
For this, you will need to enter the printer's EWS by typing the printer's IP address in the URL in any internet browser (Internet Explorer or Firefox).
If you have any doubt, please let me know.
Cheers!
Wixma.
I am an HP employee.
Say thanks by clicking the Kudos star in the post.
If my reply resolved your problem, please mark it as as Accepted Solution so that it can be found easier by other people.

Unable to Print a Web Services Information Sheet to Obtain a Claim Code

I'm trying to add a HP LaserJet Pro 200 color MFP m276nw as an ePrint device. I've successfully updated the printer firmware. When I enable the web services the Print Information Sheet button appears, but nothing prints when I click it and I'm unable to obtain a claim code.
I'm stuck. I'm not sure where to go from here...
This question was solved.
View Solution.

If you have successfully enable web services, you have a couple of options:
1. use your IP address, input it into your web browser and browse to the embedded web page. Go to the web services tab and find the email address assigned to your printer. It should be something like [email protected] The printer code will be everything before the @ sign.
2. Go to your control panel. Click on the web services icon (icon on the far left). Click on display email addres. Printer code will be everything before the @ sign.
3. Print a configuration page. Tools icon - reports - config page. In the right column, locate HP Web Service (bottom right) - printer email address - printer code will be everything before the @ sign.
Use the xxxxxx before the @ sign for the printer code to register the printer at HP Connected.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

How to Create web service using JMS with PUB/SUB pattern.

Hi All,
I need to expose web service using JMS with PUB/SUB pattern.
if you have any source for this.
I tried to use @WLJmsTransport annotation but unable to get it done.
I have configured all JMS server, topic, and connection factory.
Thanks.

Hi, I am having web sample web service program which is simple one.
But I need to Modify this to JMS enable.
Can any one help me?
Thanks.

Web service using jdev 10.1.3

Hi all....
i am trying to build a web service using oracle jdev 10.1.3.
i have built a simple java class that return common type such as String, int, long and publish theses method as web service and it works successfully......
but when i tried to build web service that return complex type
i.e.
//////////////// class that i need to create a web service from it ///////////////////////
public calss webService {
public Subscriber getSubscriber(){
return new Subscriber();
public int getID(){
return 10;
where Subscriber is a java object i have create.
public class Subscriber implements Serializable {
private String name;
public String getName(){
return "Name";
when creating the web service, the getSubscriber method was not published but the getID is published.
any idea of how to make a web service that return a complex type....... i n
web service steps:
http://www.orablogs.com/cmaxwell/archives/000629.html

As per the 10.1.3 Preview Relase Notes :
Working with OC4J 10.1.2 : By default, JDeveloper 10.1.3 works with OC4J 10.1.3. However due to bug 3989799 it cannotconnect to OC4J 10.1.2 in the same session. Testing a connection or expanding a connection will fail with an exception. Additionally, deployment will succeed, but JDeveloper will be unable to detect and report the port number needed to access any deployed web applications via HTTP. You can enable 10.1.2 support by uncommenting the line: # AddVMOption -Drmi.disablePropagation=true in the jdev.conf file (located in jdev\bin) by removing the initial '#' character and restarting JDeveloper. Note, however, that enabling this setting will prevent JDeveloper from connecting to OC4J 10.1.3 instances, including the OC4J installation provided with JDeveloper. Comment the line then restart to restore 10.1.3 connectivity.
Hope this helps.. Sunil..

Stateful WebLogic Web Services using cookie

Hi all,
How do I configure WebLogic Web Services to return cookie in the HTTP header?
In my weblogic.xml I included the following attributes but no cookie is returned in the HTTP header.
<session-descriptor>
<cookie-http-only>false</cookie-http-only>
     <tracking-enabled>true</tracking-enabled>
     <cookies-enabled>true</cookies-enabled>
     <cookie-name>JSESSION_ID</cookie-name >
</session-descriptor>
Thanks
SMT

Ok just as I expected. So I guess I am left with the following two options
1) either I switched to using JAXB in my apps instaed of xmlbeans....
2) or if I still wanna use the old JAX-RPC web services to deploy on the Weblogic 10gR3 server i will have to create my own ant task jwsc directly......as shown below in your docs
Programming Web Services for WebLogic Server (ant tasks)
http://download.oracle.com/docs/cd/E13222_01/wls/docs92/webserv/anttasks.html
Getting Started With WebLogic Web Services Using JAX-RPC
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/webserv_rpc/index.html
Will OEPE be supporting the old JAX-RPC anytime in the near future release? or have to create own build ant task to call jwsc ant task directly to compile JAX-RPC web services??

Unable to connect to web services

whenever I try to use an app on my printer photosmart 7520, I get a error message "Unable to connect to Web Services Confirm Internet access and try again", my meb service is on I can connect to the printer through the network and from the printer I can connect to the internet. My computer is a HP Pavilion model # p7-1380t and I am useing Windows 7.

Hi monkeyhead,
Welcome back to the HP Support forums, it's been a while since you last posted. I understand that you are getting an error message when you try to enable your web services.
Please set a static ip address for the printer. I have included a link to another post on the forums where I have screen shots on how to do this. Please don't worry that the screen shots are for an Officejet 8500, the steps are the same. Please note that if you don't have 'IPv4' along the left hand side menu please look for 'Network' or 'Network Address (IP)'.
HP Support forums post by Happytohelp01
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Help! Getting "Connection error Check connection" when trying to enable HP Web Services on M1536DNF

Can anyone tell me what I need to do in order to enable HP Web Services on HP LaserJet Pro M1536DNF model? Everything works fine and shows it's connected to the network but I cannot enable HP Web Services. It says "Connection error Check connection" I've tried restarting everything; network, printer, computer. I've also updated firmware to latest version as well.

Hi snapry,
Welcome to the HP Support forums. I understand that you are getting an unable to connect message when trying to enable the web services for your Laserjet CP1025nw printer.
Please set a manual IP address and manual DNS servers for the printer. The instructions can be found in the document Printer Does Not Maintain Wireless Connection. There is a Windows section and a Mac section. In the Windows section you will find the instructions in the sub-section titled “Solution three: Assign the printer a static IP address”. For Mac the applicable sub-section is titled “Solution two: Assign the printer a static IP address”. When entering the information for the Manual Preferred DNS server please use 8.8.8.8 and for the Alternate Preferred DNS server please use 8.8.4.4. These are Google’s DNS servers.
After setting the manual IP address and manual DNS servers, you should have no problems enabling the web services.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Timeout to Web Services using via Proxy Server

Hello,
I'm wondering if anybody can help.
I have a couple of preset web services on the coldfusion web server. As far as I know these have never worked since it's original installation back in June 2011.
Whenever I attempt to refresh one of the web services using CF administrator I am seeing the following error message:
Unable to refresh webservice.
Unable to read WSDL from URL: https://www.****.cfc?wsdl.
Error: java.net.ConnectException: Connection timed out: connect.
The server does not have a direct connection to the internet as it is connected to the internal company network which uses a proxy server for internet connectivity.
I am suspecting that CF is attempting to connect to the internet without the knowledge of the proxy server.
I have looked high and low but unable to locate anything in CF admin to add a proxy server.
I'm hoping somebody can reply with a simple solution to fix the above.
Many Thanks,
Andy

Andy, two things.
First, the problem could be proxy-related, but I notice also that the URL has https. And in that you’re getting a connection timeout, it could be that the destination server (at that URL in the web service call) is set to only allow SSL calls (or perhaps even calls to that specific site, directory, or file) from a specific IP address. Try visiting that URL from a browser running ON THAT SERVER (where CF is installed). It does not good to test the URL from your local development workstation. That would not be the same IP address from which the request would come when run via CF.
Second, as for specification of proxy info, here’s something to consider: the CF Admin interface showing web services is populated by a call from within CFML code (using CFINVOKE/cfobject/createobject) invoking that web service. If you can find the code that is really calling the web service, you should find that you can specify the proxy info there. See:
http://livedocs.adobe.com/coldfusion/8/htmldocs/Tags_i_10.html (cfinvoke)
http://livedocs.adobe.com/coldfusion/8/htmldocs/Tags_m-o_14.html (cfobject)
http://livedocs.adobe.com/coldfusion/8/htmldocs/help.html?content=functions-pt0_23.html (createobject)
Note that with createobject, you do it using a new (for CF8) argstruct. See the docs there for more, or my blog entry:
http://www.carehart.org/blog/client/index.cfm/2007/9/5/cf8_hiddengem_createobject_argstruc t
Let us know if any of this helps.
/charlie

How to invoke a web service using https

Hi,
I have a few security related questions surrounding BPEL process manager.
1. Does the BPEL engine have the capability to invoke a web service using https (HTTP over SSL)? Does it automatically do that if partner link URI starts with https:// ?
2. If not, what needs to be done to enable accessing a https based web service?
3. I need to write a web service that accepts a message and updates certain information in the database. The web service will be deployed in an OC4J instance in Oracle App Server. We want to allow the web service to be accessed from BPEL only by users registered in the database. What is the recommended way to pass username and password to a webservice if service is invoked from BPEL process manager? Note that specifying username/password in bpel.xml is not an option.
Thanks,
Pranav

1. Does the BPEL engine have the capability to invoke a web service using https (HTTP over SSL)? Does it automatically do that if partner link URI starts with https:// ?
We currently don't have support for HTTP over SSl. We are working on it to include this functionality in near future.
2. If not, what needs to be done to enable accessing a https based web service?
I am not sure it is possible with current product offering. I will confirm it after discussing with our concerned development group. There is some work going to integrate with Oblix security mechanism [recently acquired by Oracle].
3. I need to write a web service that accepts a message and updates certain information in the database. The web service will be deployed in an OC4J instance in Oracle App Server. We want to allow the web service to be accessed from BPEL only by users registered in the database. What is the recommended way to pass username and password to a webservice if service is invoked from BPEL process manager? Note that specifying username/password in bpel.xml is not an option.
This will be easier to do if we can use Oblix along with BPEL PM. Could you please let us know more about your application so that we can provide you the customized solution till it's part of the product. You can send this query to [email protected] so that our product management team can give you more detailed roadmap regarding this.
HTH.
Thanks,
Rakesh

How to create JAX-WS web services using providers?

I am looking at WebLogic web services, because we are investigating the possibility of migrating our web services from Apache CXF to WegLogic web services. Our web services are implemented using JAX-WS providers. However, I browsed through the Oracle Fusion Middleware document library, but I couldn't find any documents for implementing JAX-WS web services using providers.
Is there any document, tutorial, or examples of that?
Thanks in advance!
Tao

Ok just as I expected. So I guess I am left with the following two options
1) either I switched to using JAXB in my apps instaed of xmlbeans....
2) or if I still wanna use the old JAX-RPC web services to deploy on the Weblogic 10gR3 server i will have to create my own ant task jwsc directly......as shown below in your docs
Programming Web Services for WebLogic Server (ant tasks)
http://download.oracle.com/docs/cd/E13222_01/wls/docs92/webserv/anttasks.html
Getting Started With WebLogic Web Services Using JAX-RPC
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/webserv_rpc/index.html
Will OEPE be supporting the old JAX-RPC anytime in the near future release? or have to create own build ant task to call jwsc ant task directly to compile JAX-RPC web services??

Can we test a web services using CodedUI

Hi,
Is there any option available to check the response of a web service using CodedUI.
Regards,
Priya Kumar

Hi Priya Kumar,
>> Is there any option available to check the response of a web service using CodedUI.
Do you mean that you want to check the response of a web service in a web Test with CodedUI? As far as I know, there are two ways unit test and web test template projects for web services testing. Web Test lets you invoke your web services methods, though
not through better known record and palyback feature of Web Test but by directly adding services method call and parameters, properties.
You could refer the link below for more information about this, and you could get the details about testing a web service.
# Web Services Test Automation Guidance using VS 2010 - Unit Test & Web Test (Documentation)
http://blogs.msdn.com/b/geektester/archive/2011/12/11/web-services-test-automation-guidance-using-vs-2010-unit-test-amp-web-test-documentation.aspx
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to enable in web services using direct cable from my router

Similar Messages

Maybe you are looking for