Unable to Enable Intel VT-x Via BIOS Setup: (Option no-longer Available?)

I have been using VMWare Workstation (V9.0.4) with my present motherboard for about 1 year. For no apparent reason, I can no-longer do so, because "Intel VT-x" is not enabled. When I enter the BIOS setup, the option that used to be there to enable "Intel VT-x" is no-longer present. I am wondering if the latest BOIS Version (H.90) is the culprit? If it is, is there a way to "roll back" to the previous BIOS version?
Motherboard BIOS Version: H.90 (Motherboard: X79A-GD45 Plus). Windows 8.1 (64-bit)

@Svet: I checked and have (embarrassingly) found the problem. I was unable to scroll down in the BIOS settings menu for Overclocking, and therefore could not "see" the option I was looking for. I adjusted the sensitivity of my mouse(?) and all of a sudden all is well. I found the option concerned and enabled it (how it had become disabled after nearly 1 year, I do not know) and all is now as it has been for a year. Weird!
Many thanks for your willingness to assist, and sorry for wasting your time. Cheers.
(Is there a way to mark this issue as "Solved" as in some other forums?)

Similar Messages

How i can disable Intel graphic 4000 via BIOS? Dv7 7003tx

Dears guys
believe me guys i don't expecting, when i get laptop and i wouln't happy to see issue problem on switches but i try everything, nothing work
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03287577&tmp_task=prodinfoCategory&cc=us&dlc=en...
this laptop is latest model and the problem is, i can't on bios any option switch.
believe me, i feel like sick of that. plz help me out
i will bless you plz

Hi There,
this computer is shipped with switchable graphic card however this is next generation card. older versions had option to switch manually however this one has Dynamic switching(BACO) support.
so as a user you need not switch display card manually, both are active all the time. just that application will be assigned to Intel GPU or AMD(ATI) GPU based on the requirement of application.
however you have options to assign applications to use Intel or AMD only under the CCC(Catalyst Control center).
Start > search / type "ccc" > Click on "CCC" to start the Catalyst Control Center
Location:
C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static
now, as a user if you wish to assign specific application to work with ATI GPU, you have the option to assign the application for high performance(ATI). just clicking High performance will assign the ATI GPU for the application you wish, also clicking it again will make it power saver. sample below... hope it helps.
Good luck !!!
Regards,
WW
“I am an HP Employee“
***** Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

Transport via CMS (Java stack) no longer available after upgrade to sp 14

Hello
Recently we have upgraded our SAP-XI (SAP NetWeaver 2004s) up to service pack 14.
Since then the CMS is no longer available on the Java stack. Exporting objects is only possible using the File System.
When we try to release change lists for CMS transport we get the following errors:
#8 10:22:41 [AWT-EventQueue-0] ERROR com.sap.aii.utilxi.swing.toolkit.ExceptionDialog: Throwable
Thrown:
MESSAGE ID: com.sap.aii.ib.gui.operations.rb_commands.MESSAGE_TRANSPORTERROR
com.sap.aii.utilxi.swing.framework.FrameworkException: Errors occurred when transporting the change list
     at com.sap.aii.ib.gui.operations.TransportCLCommand.execute(TransportCLCommand.java:203)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
Root cause:
java.lang.AbstractMethodError: com.sap.aii.ib.sbeans.transport.TransportServiceRemote_Stub.releaseChangelist(Lcom/sap/aii/ib/core/clmgmt/ChangeListData;Lcom/sap/aii/ib/bom/gen/XiTypeId;Lcom/sap/aii/ib/core/transport/api/options/ExportOptions;)Lcom/sap/aii/utilxi/misc/api/ICheckResult;
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
Has anybody experienced similar problems with service pack 14 and has found a solution to "reactivate" the CMS? Might it be an authorization problem (UME)?
Regards
   Uwe
Appendix: Entire ErrorLog
#8 10:22:41 [AWT-EventQueue-0] ERROR com.sap.aii.utilxi.swing.toolkit.ExceptionDialog: Throwable
Thrown:
MESSAGE ID: com.sap.aii.ib.gui.operations.rb_commands.MESSAGE_TRANSPORTERROR
com.sap.aii.utilxi.swing.framework.FrameworkException: Errors occurred when transporting the change list
     at com.sap.aii.ib.gui.operations.TransportCLCommand.execute(TransportCLCommand.java:203)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
     at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.AbstractButton.doClick(Unknown Source)
     at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at javax.swing.JComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Root cause:
java.lang.AbstractMethodError: com.sap.aii.ib.sbeans.transport.TransportServiceRemote_Stub.releaseChangelist(Lcom/sap/aii/ib/core/clmgmt/ChangeListData;Lcom/sap/aii/ib/bom/gen/XiTypeId;Lcom/sap/aii/ib/core/transport/api/options/ExportOptions;)Lcom/sap/aii/utilxi/misc/api/ICheckResult;
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
     at $Proxy8.releaseChangelist(Unknown Source)
     at com.sap.aii.ib.client.transport.gen.TransportServiceDelegate.releaseChangelist(TransportServiceDelegate.java:219)
     at com.sap.aii.ib.gui.operations.TransportCLCommand.execute(TransportCLCommand.java:192)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
     at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.AbstractButton.doClick(Unknown Source)
     at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at javax.swing.JComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
#7 10:22:41 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.utilxi.swing.framework.FrameworkException: com.sap.aii.utilxi.swing.framework.FrameworkException: Errors occurred when transporting the change list
     at com.sap.aii.ib.gui.operations.TransportCLCommand.execute(TransportCLCommand.java:203)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
     at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.AbstractButton.doClick(Unknown Source)
     at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at javax.swing.JComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
#6 10:22:41 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.utilxi.swing.framework.FrameworkException: Errors occurred when transporting the change list
#5 10:22:41 [AWT-EventQueue-0] FINE AutoLog.created.java.lang.AbstractMethodError: java.lang.AbstractMethodError: com.sap.aii.ib.sbeans.transport.TransportServiceRemote_Stub.releaseChangelist(Lcom/sap/aii/ib/core/clmgmt/ChangeListData;Lcom/sap/aii/ib/bom/gen/XiTypeId;Lcom/sap/aii/ib/core/transport/api/options/ExportOptions;)Lcom/sap/aii/utilxi/misc/api/ICheckResult;
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
     at $Proxy8.releaseChangelist(Unknown Source)
     at com.sap.aii.ib.client.transport.gen.TransportServiceDelegate.releaseChangelist(TransportServiceDelegate.java:219)
     at com.sap.aii.ib.gui.operations.TransportCLCommand.execute(TransportCLCommand.java:192)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
     at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.AbstractButton.doClick(Unknown Source)
     at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at javax.swing.JComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
#4 10:22:41 [AWT-EventQueue-0] DEBUG AutoLog.created.java.lang.AbstractMethodError: com.sap.aii.ib.sbeans.transport.TransportServiceRemote_Stub.releaseChangelist(Lcom/sap/aii/ib/core/clmgmt/ChangeListData;Lcom/sap/aii/ib/bom/gen/XiTypeId;Lcom/sap/aii/ib/core/transport/api/options/ExportOptions;)Lcom/sap/aii/utilxi/misc/api/ICheckResult;
#3 10:22:13 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "TypeConntestObj" is not registered in the service class Type Service - Type Information
     at com.sap.aii.ib.core.service.ServiceBase.getServiceImpl(ServiceBase.java:71)
     at com.sap.aii.ib.bom.gen.TypeServiceImpl.getTypeInformation(TypeServiceImpl.java:82)
     at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.getTypeInfo(InternalXiItemService.java:23)
     at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.createEmptyXiItem(InternalXiItemService.java:92)
     at com.sap.aii.ib.gui.xiitem.services.XiItemServiceProvider.createEmptyXiItem(XiItemServiceProvider.java:97)
     at com.sap.aii.ib.gui.xiitem.InternalXiItemServiceForNameNamespaceObjects.addType(InternalXiItemServiceForNameNamespaceObjects.java:68)
     at com.sap.aii.ib.gui.xiitem.InternalXiItemServiceForNameNamespaceObjects.<init>(InternalXiItemServiceForNameNamespaceObjects.java:55)
     at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.guiStartup(StartupCodeEntry.java:154)
     at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:111)
     at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
     at com.sap.aii.ibrep.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:93)
     at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
     at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
     at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:383)
     at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:209)
     at com.sap.aii.ib.gui.login.SplashLoginFrame$6.run(SplashLoginFrame.java:429)
     at java.awt.event.InvocationEvent.dispatch(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
#2 10:22:13 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "TypeConntestObj" is not registered in the service class Type Service - Type Information
#1 10:22:13 [AWT-EventQueue-0] FINE AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "versConflList" is not registered in the service class Type Service - Type Information
     at com.sap.aii.ib.core.service.ServiceBase.getServiceImpl(ServiceBase.java:71)
     at com.sap.aii.ib.bom.gen.TypeServiceImpl.getTypeInformation(TypeServiceImpl.java:82)
     at com.sap.aii.ib.gui.xiitem.services.InternalXiItemService.getTypeInfo(InternalXiItemService.java:23)
     at com.sap.aii.ib.gui.xiitem.services.InternalXiItemServiceBase.<init>(InternalXiItemServiceBase.java:44)
     at com.sap.aii.ib.gui.xiitem.CommonInternalXiItemService$ForVersionConflictList.<init>(CommonInternalXiItemService.java:326)
     at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.guiStartup(StartupCodeEntry.java:150)
     at com.sap.aii.ib.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:111)
     at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
     at com.sap.aii.ibrep.gui.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:93)
     at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
     at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
     at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:383)
     at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:209)
     at com.sap.aii.ib.gui.login.SplashLoginFrame$6.run(SplashLoginFrame.java:429)
     at java.awt.event.InvocationEvent.dispatch(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
#0 10:22:13 [AWT-EventQueue-0] DEBUG AutoLog.created.com.sap.aii.ib.core.service.TypeNotRegisteredException: Type "versConflList" is not registered in the service class Type Service - Type Information

Hello Lieselot
The upgrade of our SAP-XI was done by an external company. Therefore I cannot tell you the detailed procedure.
However, you should search the Service Marketplace for patches of support package 0014 (there should be at least one patch around).
If I remember correctly patching was required on both ABAP and Java stack.
Regards
Uwe

BIOS Setup/System Reset

In attempting to reset my laptop, I came across an article to go to the "BIOS" setup option by pressing f10, however it asked for an admin password, but I've never created an admin password. Now it reads "System Disabled" with the code 93090077

Jwander wrote:
Hope my response didn't seem sarcastic. I was being serious...when it comes to computers, I'm pretty lost! I barely know what BIOS or CMOS means and definitely have no idea what UEFI is. Lol. I was just hoping someone could tell me why I am getting the error message I mentioned above. I assume it has to do with me replacing the RTC battery because I have never seen that message until after that.OK, no nothing wrong if one is lost on the Computer terminologies. CMOS was used in the computer past for storing your BIOS settings changes and if one accidentally shorted the CMOS reset pins all BIOS settings were lost and one had to reconfigure the BIOS settings again. BIOS is the Basic Input and Output Settings of how your system internals are configured with limited changes the users can do like boot options devices to time and date changes and to HDD password lock. UEFI is the newer BIOS update and allow realtime changes to be done on the Windows Desktop but in UEFI settings and the GUI (graphics user Interface) is more user friendly to use and make changes and updates to. Are you sure the CMOS battery that was replaced was on working order? And what messages did you get before that lead you to change the CMOS battery?

Probook 640 bios - Enable Intel VT-x and disable trusted execution for VMWare

With the Probook 640, can someone please explain, step by step, how I would make the proper settings in the bios for VMWare virtualization? I need to enable Intel VT-x and disable trusted execution.Thank you.

randallto wrote:
There was another setting in bois I found that required scrolling in the bios screen. Tricky to find with no mouse.
I am not sure if some day these terminologies can be standardized so someone can follow very specific instructions rather than vague instructions that are further obfuscated with the use of technical acronyms.
That is the problem, that error message in VM is not explicit enough as to what steps to take to correct the problem. These bois screen authors decide arbitrarily to name settings as it relates to their world personally and there are not standards.
I still don't know how that got changed in the first place but that is not an issue with VM ware as to what else is changing the setting.
Do you have any explicit suggestions as to how the error message can be improved?

Unable to use Intel 530 SSD with M5400

Hello!
I finally decided to write over here, after reading and viewing a lot of forums lately on this subject.
Context:
I have an Lenovo M5400 (but don't think this is definitory to the problem, as I've seen that the same simptoms seem to exist to other lenovo models as well) with the SSHD drive. I bought an Intel 530 SSD (don't think the brand mathers either) and wanted to replace the SSHD with it.
Upon replacing the original drive with the SSD, in order to make a clean windows install, the Windows 8 installer is unable to correctly detect my drive.
The drive is visible in the BIOS (at times?!) and seems to interfere somehow with the booting process, as sometimes, the boot stucks with a blank screen and the green light of the drive is on permanently. (this doesn't happen all the time).
What I tried:
1) At first, I had the drive unitialized: no GPT or MBR, no partitions on it. I tried to install it as such, but failed. It was not visible to the Windows installer, only in BIOS, in the boot order, I could see it. This was done in BIOS legacy mode.
2) I tried loading drivers in the Windows installer, via the "Load driver" option, when you get the message "W couldn't find any drives" or something like that. That was unsuccessful with the following: a) lenovo ahci drivers, from the online driver store, b) my previous windows drivers, which I took on a USB stick, c) some drivers from intel site.
3) At this point, the Intel firmware update bootable tool was not seeing my drive either.
4) I then initialized my drive by connecting it via a SATA-to-USB cable to my computer and repeated step 2), with no success still. I initialized it as MBR but I doubt that initializing it as GPT would have made a diffrence. I tried both with creating a primary and active partition and with leaving the drive initialized with all the space unallocated. No success.
5) I tried to update lenovo BIOS, because I suspect it's the cause of the problem, but was unable to do so. Downloaded the bios utility but it gives me an error "Bios folder ... ". With the bootable bios cd, it doesn't work: it doesn't boot. Has anyone managed to flash a newer bios? There is one posted on 09/30/2013 on the site, and my current one is 09/26/2013, as shown in BIOS.
6) I then fiddled with various BIOS modes: uefi, legacy, both with priority, but with no success.
At one point, I managed to see the drive in the windows installer, it was in UEFI mode only, with WIn 8 Optimized defaults ( I think) but I feared that it was just a single happening and didn't do anything, instead tried to see which settings worked in order to be able to reproduce this. I completly lost my chance, as after that, I didn't see the drive again in the windows installer. When it worked, I didn't have to load any driver. It saw it as MBR and prompted to format is as GPT, in order to use with UEFI booting.
The things I noticed:
On some occasions, in the bios boot order menu, the drive is identified as an Intel ssd, and on others just as an generic ATA HDD. I think there is a bad link between those two. When I reboot, restart, on some occasions I see it as the Intel drive and on others as the generic one. I think that in the case of generic drive, the windows installer has no chance on recognizing it.
When it is seen in the bios though, I get all sort of problems when trying to boot a CD or USB, as it seems to ignore them and get stuck in the boot process. I think that in this situations it correctly detects the SSD, if I were to look in the BIOS. But when I try to boot the CD or the USB in these situations, it just stucks with the green drive light permanently on, and with the CPU working on something ( I hear the fans starting) and the boot stops here indefinetly. I have to restart, and then, depending on the case, I get the same results, or I can boot the CD but don't find the drive.
I don't know by what chance I managed to "capture" it once in the windows installer but think this should be the common case.
After all these, what I suspect is that the Lenovo BIOS is broken somehow. It messes up with the boot order, because although I have priority for the DVD, the boot gets stuck on trying to do something with the SSD, as described above.
I am in the situation of returning the SSD back to the shop, as it is unusable with the current Lenovo m5400 motherboard/bios or whatever other hardware interferes with making it properly work ( ahci controller?).
I am very upset by this, and have seen that on these very boards, there are other posts as well, not on this model, but on other lenovo models, with the same scenarios and simptopms as mine, which didn't get any solution.
So, is there an answer to my problem? To update the BIOS? How to make the BIOS to not mess up with the boot order and get stuck? I tried all the possible combinations with no success and it's really frustrating.
Another update:
A lot of people seem to be having problem with the particular Intel 530 SSD. So this issue may not be related only to the motherboard/bios. I will post links to the corresponding threads from the intel boards:
https://communities.intel.com/thread/49389?start=15&tstart=0
https://communities.intel.com/thread/52959
https://communities.intel.com/thread/51111
Does anyone have any idea or hint if using other software for initializing the SSD than Computer Management/diskpart is of any help? Like EASUS partition manager or Gparted? Maybe the disk isn't partitioned correctly.
The disk isn't detected as an Intel SSD with the SATA-to-USB cable, instead being masked by it. Maybe this is another problem?

Hello! I have the same problem as you.
I tried to connect OCZ Vertex 2 60GBSSD but I failed. It has the same conntroller SandForce but the older generation.
Maybe that's the problem?
I was unable to install it on Windows 8.1, when I switched to the BIOS to ACHI mode Capability mode. But later he again loaded with it, then the BIOS will not see it to be.
I think the problem in the BIOS! I have 2.03 the latest.

Intel Raid Vs Marvel Raid on Big Bang B3 Marshall (Non OS Drives) via win7 setup

I apologise in advance if this seems lazy but has anybody tried setting up RAID 1 mirroring of two non-essential data hard drives within Windows 7 64-bit as opposed to a bios setup?
I only need to mirror a games hard drive so as not to have to do manually backup the hard drive with Acronis software backup every other day or so.
I have a Acronis backup of the game hard drive as I am aware that creating a raid array on both drives will delete all data on both drives but I can restore my games software later.
As it was a non-essential raid array (non-OS drives) on my previous hardware setup for these two identical games drives before upgrading to the MSI big-band Marshall B3 I totally forgot to set up the raid whilst doing a fresh install of Windows 7 on a dual boot with a previously restored/Acronis universal restore of windows 7 which also had this raid array.
If that all makes sense I'm hoping you guys can put me in the right direction as to Intel on Marvel (I seem to remember reading in the past that Marvel Raid drivers had issues) preferences for a setup within Windows 7 64-bit rather than the bios setup which would mean starting from scratch which I'm not prepared to do on a non-essential, non-OS Raid array.
If however I was doing an essential OS drives Raid array then it's a no-brainer to do a BIOS setup with a fresh install.
Any thoughts much appreciated, cheers

I don't think you are looking at the right areas.
Quote:
Sonnet Tempo cards are compatible with most external SATA storage. However, external hard drives with USB 2.0/eSATA dual interface based on the Oxford Semiconductor OXU931DS storage controller chip may not be compatible with Mac OS X when connected via SATA. Known issues are kernel panics occurring when the drive is connected, or the drive not being recognized by the operating system.
Western Digital manufactures Desktop edition (WD Caviar, Caviar SE, Caviar SE16, and Raptor X) hard drives and Enterprise (RAID) Edition (WD RE, RE2, and Raptor) hard drives. Each type of hard drive is designed to work specifically in either a desktop computer environment, or connected to a RAID controller (hardware or software-based). If you intend to configure Western Digital drives in a RAID set, Sonnet and WD recommend using only their Enterprise edition hard drives. For more information, see this Western Digital FAQ.
EndQuote
http://www.sonnettech.com/product/temposatae4p.html
Not everyone follows guidelines like they use to. Enterprise and RAID Edition drives - even Green RE4 series - not noise. You want a good drive enclosure with adequate cooling from air flow and fans. These are not silent and any drive noise is just background hum and noise that they are working.
http://macperformanceguide.com/RecommendedESATAEnclosures.html
There are dozens of reviews on drive storage. If noise is over riding then you aren't a candidate for RAID, but you are for SSD and Green, and would find SilentPCReview up your alley.
http://www.silentpcreview.com/

Unable to connect to Deskjet 3545 via Wireless Direct from Windows 8.1 laptop (Lenovo Thinkpad E530)

Hi, It's a newly bought printer. I am unable to connect to the printer via Wireless Direct from Windows 8.1 64bit laptop. I have enabled the Wireless Direct with security on the Printer. Connected to the Printer SSID from my laptop wifi. Created the new printer from Driver software. It discovers the printer with it's name,IP etc; Upon selecting the printer and click on 'Next' button on the screen, results in a 5 min search process and finally displays that it could not connect. I have tried pinging the printer and it's able to pingf the IP of the printer successfully. I have even tried disabling the Norton antivirus, but result is the same. regards,sathwik

Unable to enable SPDIF??? X-Fi XtremeGamer (non-PRO) w/ Digital I/O Module

JUnable to enable SPDIF? X-Fi XtremeGamer (non-PRO) w/ Digital I/O Module? I recently purchased the Digital I/O module in order to use SPDIF Out on my X-Fi XtremeGamer in order to send audio to my 5. receiver via digital coax.
However after hooking up my Digital I/O module to the flexijack (the one with the red light) I am unable to enable SPDIF.
I read and followed the directions listed here:
<a rel="nofollow" href="http://support.creative.com/kb/ShowArticle.aspx?sid=64440"]http://support.creative.com/kb/ShowArticle.aspx?sid=64440[/url]
The options that they tell you to set are simply are not there on my system.
I am running the most current drivers and console launcher that Creative has on their website.
I have been trying to get it to work both under Windows XP and Windows 7.
I have spent the last 3 hours beating my head on a wall, I hope someone can help me with this...
Thanks in advance for any suggestions!

Ah that's what I am afraid of.
Quoted from the article in your message: "For SB073X series : Supports Microphone-in, Line-in and Optical out connections. On a SB073X series card, this jack does not have the Digital-in function to support the Digital I/O Module. It does however connects to external digital audio devices that accept stereo PCM or compressed Dolby Digital/DTS Bitstream from the Optical output. This will require using a "Toslink to Mini Toslink" cable for connection only."

Satellite X200 - How to find BIOS setup for Intel Storage Matrix?

Hi everyone,
I'm willing to enable the Matrix Storage feature on my Satellite X200-24X. The problem is I can't find any relevant option in the BIOS setup...
Thanks !

Hi
The Intel Storage Manager is a driver and not an option in BIOS. The only option that you have in BIOS is the HDD access mode. There you can change between AHCI and Compatible.
For AHCI mode that is faster you need Intel Storage Manager driver. For Compatible mode you dont need additional drivers.
You want to know how to install Storage Manager? Just use the forum search, you will find hundreds of results. ;)

Enabling VT-x in the BIOS of a G780

Hi
I've tried to set up a 64bit guest operating system in VMWare and in VirtualBox, but have been unable to. I understand that the problem might be that VT-x is not enabled in the BIOS. However, on booting up my G780 and using F2 to edit the settings I don't see anything related to VT.
Help appreciated!
Thanks
Jim
Solved!
Go to Solution.

Ok, I've confirmed that you need to press F2, as you were doing previously, during startup to enter the BIOS. You should be pressing it when you see the Lenovo splash screen appear. Maybe you weren't pressing it at the right time? I've also found that pressing a couple times while the splash is showing works.
Here are a couple documents I found that may be of use to you as references:
User guide - http://www.lenovo.com/shop/americas/content/user_guides/gseries_ug_en.pdf
Hardware maintenance manual - http://download.lenovo.com/consumer/mobiles_pub/lenovo_g480_g485_g580_g585_g780_hmm_v1.0_english.pdf
Quick question... what CPU is in your machine?
Cheers.
ETA: looking through the user guide linked above, on page 47 at the bottom, it says
   "Hold F2 during startup. The BIOS setup utility screen opens. The
    System Memory item shows the total amount of memory installed in
    your computer."
So, if the method at the top doesn't work, try this: Shut your machine all the way down. Press power. Press and hold the F2.
This is certainly different than what I'm used to with my Thinkpad Ts, Rs and Xs.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

New Mac PRO - Windows 8 Pro Ensure that the disk's controller is enabled in the computer's bios menu

Hello all,
I got a new Mac Pro 2013, and am trying to install windows 8 using the Boot Camp Utility. It creates a 200GB partition, partitioned in FAT. Having done this on my other computers, I usually hit advanced options and then reformat the partition as NTFS. I then install. When i format, I still get this error:
Windows 8 cannot be installed - ensure that the disk's controller is enabled in the computer's bios menu. I'm not sure how to get past this step. I am trying to boot from the windows 8 CD and run setup after I partition the drive. I have the USB key with the apple setup files on it.
What am I missing?

Apparently installing via an ISO fixed this issue for me.

How to enable Intel VT-x in Windows 8 ?

In VMware, I am getting error message about enabling Intel VT-x setting in bios ? I have no idea how to go to BIOS in windows 8 and how to enable it ?
Could you please guide me how to enable VT-x in windows 8 ?

Hi,
As enabling Intel VT-x is related to hardware, please contact the computer or motherboard’s manufacture for help.
Thanks.
Nicholas Li
TechNet Community Support

How do I enable 'Scan to computer' via the printer software in a mac OSX 10.7 environment?

I am unable to see my apple mac computer listed on the printer's screen. When I select scan and then computer, it simply informs me to enable scan to computer via the printer software, does anyone know where this setting is?
OS X 10.7.3 (Lion)
HP Photosmart 5510
Connected wirelessly with the latest drivers (as of today)
HP Utility 5.2.0

Hello,
Thanks for the post. With this one, we actually have several options for scanning. I've included the links below for scanning with both the HP software and for scanning without. On the computer desktop screen do you see printer icon which says HP AIO 110e? If YES, double click it. Then double click "Scanner Actions" and then you can see the option "Activate Scan to computer".
Note: In order to use scan button on the printer, this feature should always be activated. Once activated, if you restart the printer or computer, this needs to be re-activated again.
Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02456650&tmp_task=useCategory&cc=us&dlc=en&lang...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01910186&lc=en&cc=us&dlc=en&product=5070125
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Unable to enable vt msi gt628

hello guys, I'm having the issue with my msi gt628 that I'm unable to enable virtualization in the bios. I updated the bios, but the updated version does not have any extra options and I need to be able to vitualize windows server 2008 x64 for school. Is there a better bios available or will I have to buy a new system?

what's your CPU used?
have you actually checked to see if its enabled?

Unable to Enable Intel VT-x Via BIOS Setup: (Option no-longer Available?)

Similar Messages

Maybe you are looking for