Unable to enable JSPs in SunONE 6.0

Hi,
I am having difficulty configuring SunONE 6.0 to compile and execute JSPs. I have taken many steps to rectify this, but everything that I have done has been fruitless thus far. I have attempted all of the following:
1. Configure through the web admin tool-- when selecting JDK in the Configure JRE/JDK Paths section, and adding a JDK Path value, I receive an error that "The JDK Path does not exist" although it is on the server in the location I specify.
2. Modified the start-jvm file for my server to add a NSES_JDK entry, while modifying the existing NSES_JRE entry to point to the JRE in my NSES_JDK path.
3. Updated the web-apps.xml file in my server's directory to attempt to add a <jsp-servlet enable='true'/> element-- not sure if I did this correctly or not...
Why is this so difficult??? It was significantly easier in iWS 4.x... Anyway, any help that can be provided would be very much appreciated.
Regards,
Eric Lacey

Hmm...may be you missed something. Take a look at:
http://docs.sun.com/source/816-5689-10/jsp.htm#16856
and see if you can resolve the issue.
Thanks
Manish

Similar Messages

  • Problem enabling jsp in SunONE 6.0 sp9

    Hi there.
    Bit of a newbie question here... We've never used JSP pages on any of our sites before, so this hasn't come up.
    I'm having difficulty enabling JSPs on our web server.
    I've followed the steps in the "...Guide to Servlets" manual (1. enable servlets in server manager; 2. include jsp-servlet enable="true" in web-apps.xml file; 3. add tools.jar to jvm classpath (found this in /usr/java/lib/tools.jar) )
    The classpath was originally .../iplanet/servers/plugins/servlets/examples/legacy/beans.10/SDKBeans10.jar and now I've added :/usr/java/lib/tools.jar to it.
    When I try to access a JSP application provided by a software vendor, I get an error in the server's error log as follows:
    [25/May/2007:11:48:58] info (19136):     JSP11 Log:The scratchDir you specified: /export/swr/iplanet/servers/https-mapstest.county.oxford.on.ca/config/../ClassCache/https-mapstest.county.oxford.on.ca/jspviewer is unusable.
    [25/May/2007:11:49:09] info (19136):     jsp: init
    [25/May/2007:11:49:10] failure (19136):     Internal error: servlet service function had thrown ServletException (uri=/jspviewer/jspForm.jsp): org.apache.jasper.compiler.CompileException: /export/swr/arcgis/arcims/Samples/Java/jspviewer/jspForm.jsp(8,0) Unable to open taglibrary http://mapstest.county.oxford.on.ca/maps/Java_Connector91 : Could not locate TLD http://mapstest.county.oxford.on.ca/maps/JavaConnector91, stack: org.apache.jasper.compiler.CompileException: /export/swr/arcgis/arcims/Samples/Java/jspviewer/jspForm.jsp(8,0) Unable to open taglibrary http://mapstest.county.oxford.on.ca/maps/Java_Connector91 : Could not locate TLD http://mapstest.county.oxford.on.ca/maps/JavaConnector91
    at org.apache.jasper.compiler.JspParseEventListener.handleDirective(JspParseEventListener.java:715)
    at org.apache.jasper.compiler.DelegatingListener.handleDirective(DelegatingListener.java:110)
    at org.apache.jasper.compiler.Parser$Directive.accept(Parser.java:215)
    at org.apache.jasper.compiler.Parser.parse(Parser.java:1096)
    at org.apache.jasper.compiler.Parser.parse(Parser.java:1061)
    at org.apache.jasper.compiler.Parser.parse(Parser.java:1057)
    at org.apache.jasper.compiler.Compiler.compile(Compiler.java:218)
    at org.apache.jasper.servlet.JspServlet$JspServletWrapper.loadJSP(JspServlet.java:209)
    at org.apache.jasper.servlet.JspServlet$JspServletWrapper.access$4(JspServlet.java:171)
    at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:489)
    at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:599)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:943)
    at com.iplanet.server.http.servlet.WebApplication.service(WebApplication.java:1094)
    at com.iplanet.server.http.servlet.NSServletRunner.ServiceWebApp(NSServletRunner.java:1005)
    , root cause:
    There is a .tld file at the noted location (which is linked as an "additional document directory"). It's arcims_taglib.tld.
    Is this a classpath thing?
    The server has been restarted, and starts with no apparent errors. It's noted in the error log that it has successfully initialized the web application environment (web-apps.xml) for the virtual server.
    Any suggestions and/or assistance will be greatly welcomed!
    Thanks,
    Chris J.

    I've installed 7.0 of the web server, and it's working fine. Administration seems a little slower (probably just the speed of the test machine), but it's generally fine to use. Seems quite quick and responsive at serving pages...
    In short, jsp seems to work (out-of-box). A really simple jsp page (which just prints out a date) works. (e.g.
        <%
        Date now = new Date();
        out.println(DateFormat.getTimeInstance().format(now));
        %>)
    However, if I try to use a more complex set of jsp pages, one of which is referencing something from a jar file, I get a server error:
    for host xx.xx.xx.xx trying to GET /GeoDoc/redirectlogin.do, service-j2ee reports: StandardWrapperValve[action]: PWC1406: Servlet.service() for servlet action threw exception
    java.lang.NullPointerException at com.geodoc.struts.redirectLoginAction.execute(redirectLoginAction.java:73) at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431) at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236) at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196) at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414) at javax.servlet.http.HttpServlet.service(HttpServlet.java:796) at javax.servlet.http.HttpServlet.service(HttpServlet.java:917) at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:391) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:272) at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:241) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:182) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:160) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571) at com.sun.webserver.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:149) at com.sun.webserver.connector.nsapi.NSAPIConnector.service(NSAPIConnector.java:995)
    Any thoughts or suggestions?
    Thanks,
    CDEJ

  • Unable to enable in web services using direct cable from my router

    LaserJet Pro printer is working.  Unable to enable in web tab error message: Connection error. Check Internet connection.
    I have internet connection and don't  use proxy server.  I have powered off both printer and router.  Thank you.

    Hello! Could you please provide more information regarding the issue, such as which laserjet you are using? Any additional information will be helpful in resolving your issue. Thanks!
    Help the community by marking this post as a solution if it solved your issue!.
    If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

  • Unable to open jsp file in Design mode

    Hi,
    I am unable to open jsp files in design mode, I am using eclipse Version: 3.6.1.
    Please help.
    Regards,
    Ale Hasan

    Hi Ale,
    Thank you for the additional information. Unfortunately, there does not seem to be anything unusual about your project based on your description. I'm surprised you don't see any processes listed in the process view while waiting for the page to open. I thought you might see something related to a queue manager job to "Manage Resource Event Jobs".
    Are there any messages in the error.log? You can open a view to the error log from the menu option, "Window -> Show View -> Error Log". I'm curious if there are any messages about a process timing out, unable to reset some object within a certain time, or any exceptions logged.
    If you change to another workspace with just a single JSF web project containing a smaller number of JSP, do you experience the same behavior?
    Can you also try using a more recent release of OEPE to see if that helps? The 11.1.1.6.1 release is about a year old.
    http://www.oracle.com/technetwork/developer-tools/eclipse/downloads/index.html
    Kind regards,
    Carlin

  • Unable to enable SPDIF??? X-Fi XtremeGamer (non-PRO) w/ Digital I/O Module

    JUnable to enable SPDIF? X-Fi XtremeGamer (non-PRO) w/ Digital I/O Module? I recently purchased the Digital I/O module in order to use SPDIF Out on my X-Fi XtremeGamer in order to send audio to my 5. receiver via digital coax.
    However after hooking up my Digital I/O module to the flexijack (the one with the red light) I am unable to enable SPDIF.
    I read and followed the directions listed here:
    <a rel="nofollow" href="http://support.creative.com/kb/ShowArticle.aspx?sid=64440"]http://support.creative.com/kb/ShowArticle.aspx?sid=64440[/url]
    The options that they tell you to set are simply are not there on my system.
    I am running the most current drivers and console launcher that Creative has on their website.
    I have been trying to get it to work both under Windows XP and Windows 7.
    I have spent the last 3 hours beating my head on a wall, I hope someone can help me with this...
    Thanks in advance for any suggestions!

    Ah that's what I am afraid of.
    Quoted from the article in your message: "For SB073X series : Supports Microphone-in, Line-in and Optical out connections. On a SB073X series card, this jack does not have the Digital-in function to support the Digital I/O Module. It does however connects to external digital audio devices that accept stereo PCM or compressed Dolby Digital/DTS Bitstream from the Optical output. This will require using a "Toslink to Mini Toslink" cable for connection only."

  • Unable to run jsp in tomcat 5.0

    hi ,
    iam unable to run jsps in tomcat 5.0.
    i get an error saying ,unable to compile java compiler
    iam able to compile servlets & execute them.
    i have already set the paths for JAVA_HOME & CATALINA_HOME
    please guide me accordingly
    regards ,
    shailesh

    the same code gets executed in other system in which there is only one jdk.
    the system which iam using has got many jre s due to
    1) netbeans IDE
    2)Weblogic server
    3) jdk 1.4 was previously installed
    4) jdk 1.5 was also installed
    but i have set JAVA_HOME   =jdk1.6
    I doubt the compiler is trying to compile itself or another compiler
    regards ,
    shaileshkumar

  • Admin applet issue (unable to enable java plugins)

    i installed orlc UCM on linux 64 and the (unable to enable java plugins) so i cant access admin applet..
    i did this
    http://www.java.com/en/download/help/linux_x64_install.xml
    http://www.oracle.com/technetwork/java/javase/manual-plugin-install-linux-136395.html
    but still nothing,,
    Edited by: mahmoud abukhaled on Sep 17, 2012 2:06 AM
    Edited by: mahmoud abukhaled on Sep 17, 2012 2:08 AM
    Edited by: mahmoud abukhaled on Sep 17, 2012 2:16 AM
    Edited by: mahmoud abukhaled on Sep 17, 2012 2:16 AM

    You need to add security policy file
    Check this out
    http://stackoverflow.com/questions/2612895/where-to-place-java-applet-policy-file
    http://geosim.cs.vt.edu/Java/MigModel/help/Policies.html
    Regards,
    Vikrant Korde

  • Jsp on iplanet 6.0 sp7 error: unable to load jsp class

    I am having trouble to install astraweb on iplanet with following error
    [06/Apr/2005:08:46:38] info (21397): WebApp service: uri = /astraweb/ contextPath = /astraweb servletPath = /index.jsp pathInfo = null servletName = jsp
    [06/Apr/2005:08:46:38] info (21397): JSP11 Log:JspEngine --> /index.jsp
    [06/Apr/2005:08:46:38] info (21397): JSP11 Log: ServletPath: /index.jsp
    [06/Apr/2005:08:46:38] info (21397): JSP11 Log: PathInfo: null
    [06/Apr/2005:08:46:38] info (21397): JSP11 Log: RealPath: /opt/iplanet60sp7/docs/astraweb/index.jsp
    [06/Apr/2005:08:46:38] info (21397): JSP11 Log: RequestURI: /astraweb/
    [06/Apr/2005:08:46:38] info (21397): JSP11 Log: QueryString: null
    [06/Apr/2005:08:46:38] info (21397): JSP11 Log:Classpath according to the Servlet Engine is: /opt/iplanet60sp7/docs/astraweb/WEB-INF/classes:/opt/iplanet60sp7/docs/astraweb/WEB-INF/lib/Basej4.jar:/opt/iplanet60sp7/docs/astraweb/WEB-INF/lib/commons-fileupload-1.0.jar:/opt/iplanet60sp7/docs/astraweb/WEB-INF/lib/hsi.jar:/opt/iplanet60sp7/docs/astraweb/WEB-INF/lib/net.jar:/opt/iplanet60sp7/docs/astraweb/WEB-INF/lib/oreilly.jar:
    [06/Apr/2005:08:46:38] info (21397): JSP11 Log:unable to load jsp class: jsps.index_jsp
    [06/Apr/2005:08:46:38] failure (21397): Internal error: exception thrown from the servlet service function (uri=/astraweb/): java.lang.NullPointerException, Stack: java.lang.NullPointerException
    at org.apache.jasper.servlet.JspServlet$JspServletWrapper.isJspFileModified(JspServlet.java:231)
    at org.apache.jasper.servlet.JspServlet$JspServletWrapper.loadJSP(JspServlet.java:199)
    at org.apache.jasper.servlet.JspServlet$JspServletWrapper.access$4(JspServlet.java:171)
    at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:486)
    at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:596)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:919)
    at com.iplanet.server.http.servlet.WebApplication.service(WebApplication.java:1058)
    at com.iplanet.server.http.servlet.NSServletRunner.ServiceWebApp(NSServletRunner.java:981)
    Any idea? Thanks

    In the course of your troubleshooting to date, have you worked through the following document, Jeff?
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

  • Unable to Enable Maintenance Mode

    This is my new challenge. I am unable to enable the maintenance mode. Following is the error message taken from adadmin.log. At the same time when I issue the command to enable it, there is core dump in the alert log and this is what it says. Please help me troubleshoot this issue.
    Errors in file /oraadmin/SID/udump/SID_ora_7943.trc:
    ORA-07445: exception encountered: core dump [kopxccc()+92] [SIGSEGV] [Address not mapped to object] [0x000000062] [] []
    Change Maintenance Mode
    Maintenance Mode is currently: [Disabled].
    Maintenance mode should normally be enabled when patching
    Oracle Applications and disabled when users are logged on
    to the system. See the Oracle Applications Maintenance
    Utilities manual for more information about maintenance mode.
    Please select an option:
    1. Enable Maintenance Mode
    Please select an option:
    1. Enable Maintenance Mode
    2. Disable Maintenance Mode
    3. Return to Main Menu
    Enter your choice [3] : 1
    sqlplus -s &un_apps/***** @/apps/tcfsmgr2/tcfscdi1appl/ad/11.5.0/patch/115/sql/adsetmmd.sql ENABLE
    declare
    ERROR at line 1:
    ORA-03113: end-of-file on communication channel
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    ERROR:
    ORA-01041: internal error. hostdef extension doesn't exist
    memory exhausted
    ORA-24323: value not allowed
    Error accessing package DBMS_APPLICATION_INFO
    ERROR:
    ORA-03114: not connected to ORACLE
    memory exhausted
    memory exhausted
    An error occurred while running adsetmmd.sql.
    Continue as if it were successful [No] : No
    aiimToggleMaintenanceMode():Error while calling aiucm3().
    AD Administration error:
    Unable to Enable Maintenance Mode.

    Yes, I was able to enable it from the backend;
    SQL> @/apps/tcfsmgr2/tcfscdi1appl/ad/11.5.0/patch/115/sql/adsetmmd.sql ENABLE
    PL/SQL procedure successfully completed.
    Commit complete.
    I am quite sure it did not work when it tried last night.
    Let me try to do it using adadmin again. May be issue is no longer an issue.

  • Unable to enable routing in 3750x switch

    im unable to enable ip routing in the WS-C3750X-24T-L switch. Tried with SDM prefer routing option but still same issue.
    Can some suggest on this?
    MOdel: WS-C3750X-24T-L
    IOS :flash:c3750e-ipbasek9-mz.122-55.SE5.bin
    sh license
    Index 1 Feature: ipservices
            Period left: 0  minute  0  second
    Index 2 Feature: ipbase
            Period left: 0  minute  0  second
    Index 3 Feature: lanbase
            Period left: Life time
            License Type: Permanent
            License State: Active, In Use
            License Priority: Medium
            License Count: Non-Counted
    regards,
    Ezra.

    Index 3 Feature: lanbase        Period left: Life time        License Type: Permanent        License State: Active, In Use
    You don't have the license to run routing. 

  • How to enable FIPS on sunone directory server 6.3?

    Hi all,
    My product needs FIPS certification.
    As part of that we will be connecting to sunone directory server and use it as user store.
    For that i need the steps to enable FIPS on sunone directory server 6.3.
    Has any one done this before?
    Please help me in this.
    Thanks in advance.
    Usha.

    To enable the TLS Encryption Cipher
    1. Check out the ssl-supported-ciphers property of the server.
    $ dsconf set-server-prop -h host -p port ssl-cipher-family:cipher2 View the available SSL ciphers.
    $ dsconf get-server-prop -h host -p port ssl-supported-ciphers
      ssl-supported-ciphers :     TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
      ssl-supported-ciphers :     TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
      ssl-supported-ciphers :     TLS_DHE_RSA_WITH_AES_256_CBC_SHA
      ssl-supported-ciphers :     TLS_DHE_DSS_WITH_AES_256_CBC_SHA
      ...Hope this helps,
    -Shankar

  • Unable to enable DirectX effects (hangs at 92%!)

    When I try to enable DirectX effects, Audition first refreshes the effects list. It does this fine until it gets to 92%, then it hangs, stopping at the same effect (JetAudio Sound Effector V3) each time. Audition is still running but nothing happens, it just doesn't go any further, and I have to force close the program.
    Can anyone think of a way I can stop this one effect from loading? I searched but couldn't find any file with that file name.
    I am unable to enable any of my DirectX effects. Thanks for any help.

    Dodgy DirectX has always been a bit of a problem. Unlike VSTs, which are essentially DLLs that sit somewhere nice and sensible, and you can install and delete them easily, DirectX has to use an installer, and heaven only knows where it puts the appropriate files... although I understand that the real issue with removing them is that they end up as registry entries, and not necessarily straightforward ones either.
    Probably the most useful thing I can suggest is that you look at this thread on the KVR forum, where there are a couple of suggestions.

  • "Unable to enable debugging" within Workshop 8.1

    I'm testing a portal application with workshop 8.1. When I started the .portal, I got this error "Unable to enable debugging. Verify that you webapp deployed correctly". If I choose to start without debugging it's OK.
    The deployment was successfully done without error. Is there anything else I can check?
    Thanks

    Thanks.
    One of my concerns is that this change will update the .work file with some local values such as host name and port number, etc. For some reason we could not use a generic name such as "localhost" in our development. This causes a little problem since the .work file contains some hard coded parameters can not be shared amoung other developers.
    Hopefully there is another better solution.
    Thanks again for the help!

  • Unable to enable vt msi gt628

    hello guys, I'm having the issue with my msi gt628 that I'm unable to enable virtualization in the bios. I updated the bios, but the updated version does not have any extra options and I need to be able to vitualize windows server 2008 x64 for school. Is there a better bios available or will I have to buy a new system?

    what's your CPU used?
    have you actually checked to see if its enabled?

  • Unable to enable Core Server

    Following the documented steps to enable CIFS acceleration, but for some reason I am unable to enable the "enable core server" option (same applies to "edge server".
    Am I missing something ?
    Please advise,
    Sijbren

    Sijbren,
    If you are using WAAS 4.1.x and using CIFS AO, you don't need core and edge services, just enable the AO for CIFS acceleration.
    If you are using WAAS 4.0, then enable the CIFS edge/core services via the GUI. If you are using legacy mode in 4.1, then you need to have the CIFS AO disabled before you can enable the edge or core services. Once edge and core services are enabled, then you can create connectivity directives.
    However, I recommend you use the transparent cifs acceleration in the new CIFS AO in 4.1, it's easier to setup and takes advantage of bi-directional acceleration.
    Hope that helps,
    Dan

Maybe you are looking for

  • How do you access different itunes accounts on one computer?

    How do I access my itunes account from my computer if my husband downloaded the app on our labtop and set it up under his account?

  • Staging area and Target area in ODI

    Hii...experts. How Staging area is different from target area and same as target area?? what are their benefits and drawbacks in both?? Please suggest me with some pictorial representation.. Thanks

  • TDS Calculation in SAP Business One 8.8

    Hi Experts ,                         I am making  a service invoice in which i have to calculate the TDS on Base Amount + Service Tax Amount . But it is calculating TDS only on  base amount . Kindly Suggest any solution . Regards

  • Create/Delete a text file

    How can I create a text file before writing sth into it? And how to delete it afterwards??

  • Ora-03114 in during dbca run in initxml.sql

    I'm getting ora-03114 during dbca run in initxml.sql for an 11g db install, it completes the first compile but then fails and continues to fail with ora-03114. This happened before so i trashed the database and started again thinking it may have been