Unable to enable mod_jk !

Hi!
Im trying to use Tomcat to handle .jsp-files, with the apache module mod_jk.
But when I enable the mod_jk with the preinstalled mod_jk.so file (1.2mb), i get a 403 page error on all jspfiles. Furhtermore, the .so file looks different in finder, and is treated as a "Document", all other .so´s is handled as "exec. unix file".
But the file extention IS .so !
I´ve also tried to download the "tomcat-connectors-1.2.26-src" and build a new mod_jk.so (324kb) (64 and 32bit). The file then becomes a "exec. unix file" as all the other .so´s, BUT now I can´t even start the apache web server when the module is enabled in httpd.conf!
Anyone has a clue?

No one?

Similar Messages

Unable to enable in web services using direct cable from my router

LaserJet Pro printer is working. Unable to enable in web tab error message: Connection error. Check Internet connection.
I have internet connection and don't use proxy server. I have powered off both printer and router. Thank you.

Hello! Could you please provide more information regarding the issue, such as which laserjet you are using? Any additional information will be helpful in resolving your issue. Thanks!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Unable to enable SPDIF??? X-Fi XtremeGamer (non-PRO) w/ Digital I/O Module

JUnable to enable SPDIF? X-Fi XtremeGamer (non-PRO) w/ Digital I/O Module? I recently purchased the Digital I/O module in order to use SPDIF Out on my X-Fi XtremeGamer in order to send audio to my 5. receiver via digital coax.
However after hooking up my Digital I/O module to the flexijack (the one with the red light) I am unable to enable SPDIF.
I read and followed the directions listed here:
<a rel="nofollow" href="http://support.creative.com/kb/ShowArticle.aspx?sid=64440"]http://support.creative.com/kb/ShowArticle.aspx?sid=64440[/url]
The options that they tell you to set are simply are not there on my system.
I am running the most current drivers and console launcher that Creative has on their website.
I have been trying to get it to work both under Windows XP and Windows 7.
I have spent the last 3 hours beating my head on a wall, I hope someone can help me with this...
Thanks in advance for any suggestions!

Ah that's what I am afraid of.
Quoted from the article in your message: "For SB073X series : Supports Microphone-in, Line-in and Optical out connections. On a SB073X series card, this jack does not have the Digital-in function to support the Digital I/O Module. It does however connects to external digital audio devices that accept stereo PCM or compressed Dolby Digital/DTS Bitstream from the Optical output. This will require using a "Toslink to Mini Toslink" cable for connection only."

Admin applet issue (unable to enable java plugins)

i installed orlc UCM on linux 64 and the (unable to enable java plugins) so i cant access admin applet..
i did this
http://www.java.com/en/download/help/linux_x64_install.xml
http://www.oracle.com/technetwork/java/javase/manual-plugin-install-linux-136395.html
but still nothing,,
Edited by: mahmoud abukhaled on Sep 17, 2012 2:06 AM
Edited by: mahmoud abukhaled on Sep 17, 2012 2:08 AM
Edited by: mahmoud abukhaled on Sep 17, 2012 2:16 AM
Edited by: mahmoud abukhaled on Sep 17, 2012 2:16 AM

You need to add security policy file
Check this out
http://stackoverflow.com/questions/2612895/where-to-place-java-applet-policy-file
http://geosim.cs.vt.edu/Java/MigModel/help/Policies.html
Regards,
Vikrant Korde

Unable to Enable Maintenance Mode

This is my new challenge. I am unable to enable the maintenance mode. Following is the error message taken from adadmin.log. At the same time when I issue the command to enable it, there is core dump in the alert log and this is what it says. Please help me troubleshoot this issue.
Errors in file /oraadmin/SID/udump/SID_ora_7943.trc:
ORA-07445: exception encountered: core dump [kopxccc()+92] [SIGSEGV] [Address not mapped to object] [0x000000062] [] []
Change Maintenance Mode
Maintenance Mode is currently: [Disabled].
Maintenance mode should normally be enabled when patching
Oracle Applications and disabled when users are logged on
to the system. See the Oracle Applications Maintenance
Utilities manual for more information about maintenance mode.
Please select an option:
1. Enable Maintenance Mode
Please select an option:
1. Enable Maintenance Mode
2. Disable Maintenance Mode
3. Return to Main Menu
Enter your choice [3] : 1
sqlplus -s &un_apps/***** @/apps/tcfsmgr2/tcfscdi1appl/ad/11.5.0/patch/115/sql/adsetmmd.sql ENABLE
declare
ERROR at line 1:
ORA-03113: end-of-file on communication channel
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
memory exhausted
ORA-24323: value not allowed
Error accessing package DBMS_APPLICATION_INFO
ERROR:
ORA-03114: not connected to ORACLE
memory exhausted
memory exhausted
An error occurred while running adsetmmd.sql.
Continue as if it were successful [No] : No
aiimToggleMaintenanceMode():Error while calling aiucm3().
AD Administration error:
Unable to Enable Maintenance Mode.

Yes, I was able to enable it from the backend;
SQL> @/apps/tcfsmgr2/tcfscdi1appl/ad/11.5.0/patch/115/sql/adsetmmd.sql ENABLE
PL/SQL procedure successfully completed.
Commit complete.
I am quite sure it did not work when it tried last night.
Let me try to do it using adadmin again. May be issue is no longer an issue.

Unable to enable routing in 3750x switch

im unable to enable ip routing in the WS-C3750X-24T-L switch. Tried with SDM prefer routing option but still same issue.
Can some suggest on this?
MOdel: WS-C3750X-24T-L
IOS :flash:c3750e-ipbasek9-mz.122-55.SE5.bin
sh license
Index 1 Feature: ipservices
        Period left: 0 minute 0 second
Index 2 Feature: ipbase
        Period left: 0 minute 0 second
Index 3 Feature: lanbase
        Period left: Life time
        License Type: Permanent
        License State: Active, In Use
        License Priority: Medium
        License Count: Non-Counted
regards,
Ezra.

Index 3 Feature: lanbase        Period left: Life time        License Type: Permanent        License State: Active, In Use
You don't have the license to run routing.

Unable to enable DirectX effects (hangs at 92%!)

When I try to enable DirectX effects, Audition first refreshes the effects list. It does this fine until it gets to 92%, then it hangs, stopping at the same effect (JetAudio Sound Effector V3) each time. Audition is still running but nothing happens, it just doesn't go any further, and I have to force close the program.
Can anyone think of a way I can stop this one effect from loading? I searched but couldn't find any file with that file name.
I am unable to enable any of my DirectX effects. Thanks for any help.

Dodgy DirectX has always been a bit of a problem. Unlike VSTs, which are essentially DLLs that sit somewhere nice and sensible, and you can install and delete them easily, DirectX has to use an installer, and heaven only knows where it puts the appropriate files... although I understand that the real issue with removing them is that they end up as registry entries, and not necessarily straightforward ones either.
Probably the most useful thing I can suggest is that you look at this thread on the KVR forum, where there are a couple of suggestions.

"Unable to enable debugging" within Workshop 8.1

I'm testing a portal application with workshop 8.1. When I started the .portal, I got this error "Unable to enable debugging. Verify that you webapp deployed correctly". If I choose to start without debugging it's OK.
The deployment was successfully done without error. Is there anything else I can check?
Thanks

Thanks.
One of my concerns is that this change will update the .work file with some local values such as host name and port number, etc. For some reason we could not use a generic name such as "localhost" in our development. This causes a little problem since the .work file contains some hard coded parameters can not be shared amoung other developers.
Hopefully there is another better solution.
Thanks again for the help!

Unable to enable vt msi gt628

hello guys, I'm having the issue with my msi gt628 that I'm unable to enable virtualization in the bios. I updated the bios, but the updated version does not have any extra options and I need to be able to vitualize windows server 2008 x64 for school. Is there a better bios available or will I have to buy a new system?

what's your CPU used?
have you actually checked to see if its enabled?

Unable to enable Core Server

Following the documented steps to enable CIFS acceleration, but for some reason I am unable to enable the "enable core server" option (same applies to "edge server".
Am I missing something ?
Please advise,
Sijbren

Sijbren,
If you are using WAAS 4.1.x and using CIFS AO, you don't need core and edge services, just enable the AO for CIFS acceleration.
If you are using WAAS 4.0, then enable the CIFS edge/core services via the GUI. If you are using legacy mode in 4.1, then you need to have the CIFS AO disabled before you can enable the edge or core services. Once edge and core services are enabled, then you can create connectivity directives.
However, I recommend you use the transparent cifs acceleration in the new CIFS AO in 4.1, it's easier to setup and takes advantage of bi-directional acceleration.
Hope that helps,
Dan

Unable to enable Multiprocessing

Hi, I'm using After Effects CC 2014. I am unable to enable this option, even when I was using previous version of AE.
I'm using a laptop with Intel Core i5 4210U, 1.7 - 2.7 Ghz with 4Gb of RAM.
Any reply is appreciated.
Thank you in advance!

Your system does not meet the minimum system requirements. First, get more RAM....
System requirements | After Effects

Unable to enable debugging

Every once in a while I get a message 'Unable to enable debugging. Please verify
that your webapp is deployed correctly. I can't seem to figure out why?

Tito,
If you are working with multiple servers on the same machine, and have not
shutdown the debugger which was started for a different server, then you
could end up with this error message.
Please make sure that you use the stopweblogic script to shut down servers
in development mode. This script will make sure that both the server and the
debugger process are shutdown.
Regards,
Raj Alagumalai
Backline Workshop Support
"Tito Kumar" <[email protected]> wrote in message
news:4076dad5$[email protected]..
>
Every once in a while I get a message 'Unable to enable debugging. Pleaseverify
that your webapp is deployed correctly. I can't seem to figure out why?

Unable to enable "Include in Building Default Conditions"

Hi Gurus,
I am unable to enable the "Include in Building Default Conditions" checkbox of Defaulting Rules in OM.
Application : Order Management
Entity: Order Line
Defaulting Seq : 50
Attribute : Bill To Contact (Unable to enable Include in Building Defaulting Conditions)
Could you please help me out in this....
Thanks in Advance.

I was looking at both the technet article for setting up UPD as well as this walk-through:
http://thewolfblog.com/2014/02/24/user-profile-disks-for-rds-2012-2012-r2/
The step after the creation of the disk in this walk-through is to look at who has permission on the .vhdx file, now obviously I am not at that step, but that is what led me down the trail of looking at user permissions, hence my attempts to set up shares
where 'everyone' has full permissions on both the share and the folder.
I have tried to set up multiple shares for the collection, I have tried on two different disks (volumes) on the RDP server itself, I also tried setting up a share on our fileserver (which has all kinds of shares working fine) and the same error occurred
in all cases.
I also found this Technet article:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/d6469d31-6540-4075-a85f-a6e8f7c11e89/user-profile-disk-template-cannot-be-created-when-setting-up-session-collection?forum=winserverTS
So that seems close to what I am looking for, but I have checked and the exact group policy that was causing the above linked issue is not defined in our group policies, but maybe there are other group policies that are causing the issue?

HP Photosmart Plus B210 unable to enable web service

I just moved this printer from one location to another. I have the printer connected to the network - but I am unable to enable web services. I just keep getting a Service Connection Error that says "There was a problem connecting to the Server."
I've looked for solutions on the HP site - but none of them have worked for me.
Any help is greatly appreciated!
LuAnn
This question was solved.
View Solution.

Hi again LuAnn_Freund,
Try the same steps that eunicerocksify suggested, but try these DNS settings;
Primary DNS Server = 209.244.0.3
Secondary DNS Server = 209.244.0.4
If those do not work, I would suggest speaking with HP's Cloud Support Team to get this issue looked at first hand by an agent that can log onto your computer. I understand that you are posting on the Forums for a reason, but since you only have today remaining to work on a resolution, speaking with them would be best.
Please call HP’s Cloud Services at 855-785-2777. If you live outside the US/Canada Region, please click the link below to get the support number for your region, click HERE to find the Technical Support number for your country/region.
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Convergence/application server enable mod_jk/ajp

How do I enable mod_jk/AJP on the application server?
I tried this:
sudo /opt/SUNWappserver/bin/asadmin create-jvm-options -Dcom.sun.enterprise.web.connector.enableJK=8009And I restarted the appserv.
This showed up in the logs.
[#|2008-11-07T15:47:51.751-0600|INFO|sun-appserver9.1|javax.enterprise.system.co
ntainer.web|_ThreadID=10;_ThreadName=main;|Apache mod_jk/jk2 attached to virtual
-server server listening on port: 8009|#]But it's not listening on port 8009.
Any ideas?

jessethompson wrote:
How do I enable mod_jk/AJP on the application server? I assume you were using the following steps to enable mod_jk in application server?
http://docs.sun.com/app/docs/doc/819-3672/gfaad?a=view
Your best bet for help on Application Server is via the App-Server specific forum:
http://forums.sun.com/forum.jspa?forumID=734
Regards,
Shane.

Unable to enable mod_jk !

Similar Messages

Maybe you are looking for