Unable to Enable profile option

Hi All,
We are facing some issue related to profile options in R2. We are unable to set the value "yes" to the profile option "WIP: MES for Discrete Manufacturing Install".
please any one of u help me on this.......
Thanks in advance.

skjb wrote:
Hi Hussein,
We are unable to set the profile option to "yes", cause only one option is displayed there,that is "no".
We have two R12 Instance, in First instance the two options "yes" and "no" are displayed for this profile option, but not in second instance[here we have only one option "no"].
Thanks
KhadarDid you complete the setup as per the manual? -- http://docs.oracle.com/cd/B53825_08/current/html/docset.html
What is the difference between the two instances?
Thanks,
Hussein

Similar Messages

Unable to Download Profile Options Spreadsheet on OER

Hi
On OER, When I Select the Type as 'Profile Option' it brings up an excel sheet. But when I click on the link, it shows an error 'The file could not be written to cache'.
Thanks
Srinivasa Sunchu

here it is
https://docs.google.com/file/d/0BwMHadroX7nQUEhtNUhncGJERUk/edit?usp=sharing
and i downloaded from the same location so may be some other issue at your side.
Thanks & Regards !
Vik
Fusion Apps Developer Relations
http://blogs.oracle.com/fadevrel
Please mark the response helpful or answered appropriately

Unable to enable Multiprocessing

Hi, I'm using After Effects CC 2014. I am unable to enable this option, even when I was using previous version of AE.
I'm using a laptop with Intel Core i5 4210U, 1.7 - 2.7 Ghz with 4Gb of RAM.
Any reply is appreciated.
Thank you in advance!

Your system does not meet the minimum system requirements. First, get more RAM....
System requirements | After Effects

Unable to enable Write Back Option in OBIEE11g

Hi Experts,
I'm using OBIEE 11g.
I have followed all the steps to enable the write back option as in OBIEE 10g.
I'm unable to check the enable writeback option in column properties.
Am I missing any configuration steps.
Pls help me by providing necessary steps.
Regards,
Kalyan.

Hi,
I have tried it and now able to get the write back option in enabled state.
So, Iam closing this issue..
Regards,
Kalyan.

Profile option update at responsibility level from backend

Hi,
I referred few online and oracle support document to update the profile option from backend. I was able to change the profile option at site level, but when I am trying to update the profile at responsibility ( or any level such as user etc), I am unable to do so. Though the script says that profile option has been updated, it doesn't show up when I check on frontend.
EBS 11.5.10.2
DB 11.2.0.1
The script which I use to change profile at site level is this:-
DECLARE
stat boolean;
BEGIN
dbms_output.disable;
dbms_output.enable(100000);
stat := FND_PROFILE.SAVE('SITENAME', 'ABDVLP', 'SITE');
IF stat THEN
dbms_output.put_line( 'Stat = TRUE - profile updated' );
ELSE
dbms_output.put_line( 'Stat = FALSE - profile NOT updated' );
END IF;
commit;
END;
I tweaked the above script to include the responsibility level change, but its not changing. Both the below scripts are not making any changes.
SCRIPT - 1
DECLARE
stat boolean;
BEGIN
dbms_output.disable;
dbms_output.enable(100000);
stat := FND_PROFILE.SAVE('ICX_DISCOVERER_LAUNCHER', 'http://nalinoes01.abd.ad.acco.com:8003/discwb4/html/discolaunch.htm?Connect=[APPS_SECURE]', 'RESP',51889,671);
IF stat THEN
dbms_output.put_line( 'Stat = TRUE - profile updated' );
ELSE
dbms_output.put_line( 'Stat = FALSE - profile NOT updated' );
END IF;
commit;
END;
Note: I found the responsibility id from the below query
SELECT responsibility_id ,application_id
     FROM fnd_responsibility_tl
    WHERE responsibility_name = 'DIRECT CA IBE CUSTOMER';
===============================================================================
SCRIPT-2
DECLARE
   stat           BOOLEAN;
   resp_id        NUMBER;
   appl_id        NUMBER;
   resp_appl_id   NUMBER;
BEGIN
   DBMS_OUTPUT.DISABLE;
   DBMS_OUTPUT.ENABLE (100000);
   -- Set the Profile Option value at responsibility level
   SELECT responsibility_id, application_id
     INTO resp_id, resp_appl_id
     FROM fnd_responsibility_tl
    WHERE responsibility_name = 'DIRECT CA IBE CUSTOMER';
   stat :=
      fnd_profile.SAVE
         (x_name                        => 'ICX_DISCOVERER_LAUNCHER',   -- Profile name you are setting
          x_value                       => 'http://nalinoes01.abd.ad.acco.com:8003/discwb4/html/discolaunch.htm?Connect=[APPS_SECURE]',   -- Profile value you are setting
          x_level_name                  => 'RESP',   -- Level that you're setting at: 'SITE','APPL','RESP','USER', etc.
          x_level_value                 => resp_id,   -- Default NULL Level value that you are setting at, e.g. user id for 'USER' level. X_LEVEL_VALUE is not used at site level.
          x_level_value_app_id          => resp_appl_id,   -- Default NULL. Used for 'RESP' and 'SERVRESP' level; Resp Application_Id.
          x_level_value2                => NULL   -- 2nd Level value that you are setting at. This is for the 'SERVRESP' hierarchy.
   IF stat
   THEN
      DBMS_OUTPUT.put_line ('Stat = TRUE - profile updated');
   ELSE
      DBMS_OUTPUT.put_line ('Stat = FALSE - profile NOT updated');
   END IF;
   COMMIT;
END;

I tried to change at SERV level and still the profile never gets updated. Kindly help.

Setting profile option values using Java Concurrent Program

Hi,
I have a java concurrent program in which i am trying to update a profile option which is enabled only at site level, but the values are not getting committed once the CP completes.
1. I am using CpContext.getProfileStore().SetProfile(<name>,<value>) to set the value.
2. I am printing CpContext.getProfileStore().getProfile(<name>) in the same run and this works.
3. BUt once the CP completes, the values are gone. Seems we have to issue a commit.
3. So i used CpContext.getJDBCConnection().commit; Even this doesn't commit.
Pls. suggest. Has anyone used these APIs to update profile options?
Thanks,
Suresh.

I am not not a java expert, but pl see if MOS Docs 305710.1 (A SAMPLE JAVA CONCURRENT PROGRAM) and 827563.1 (How To Create a Java Concurrent Program?) can help
HTH
Srini

Item Validation Organization is not Appearing in LOV in profile options

Dear All,
Item Validation Organization is not Appearing in LOV of the Profile options.
OE: Item Validation Organization
QP : Item Validation Organization
Regards,
John

Hi,
Enable profile 'FND: Personalization Seeding Mode', clear the cache and check if this solves your problem.
--Sushant

Unable to enable SPDIF??? X-Fi XtremeGamer (non-PRO) w/ Digital I/O Module

JUnable to enable SPDIF? X-Fi XtremeGamer (non-PRO) w/ Digital I/O Module? I recently purchased the Digital I/O module in order to use SPDIF Out on my X-Fi XtremeGamer in order to send audio to my 5. receiver via digital coax.
However after hooking up my Digital I/O module to the flexijack (the one with the red light) I am unable to enable SPDIF.
I read and followed the directions listed here:
<a rel="nofollow" href="http://support.creative.com/kb/ShowArticle.aspx?sid=64440"]http://support.creative.com/kb/ShowArticle.aspx?sid=64440[/url]
The options that they tell you to set are simply are not there on my system.
I am running the most current drivers and console launcher that Creative has on their website.
I have been trying to get it to work both under Windows XP and Windows 7.
I have spent the last 3 hours beating my head on a wall, I hope someone can help me with this...
Thanks in advance for any suggestions!

Ah that's what I am afraid of.
Quoted from the article in your message: "For SB073X series : Supports Microphone-in, Line-in and Optical out connections. On a SB073X series card, this jack does not have the Digital-in function to support the Digital I/O Module. It does however connects to external digital audio devices that accept stereo PCM or compressed Dolby Digital/DTS Bitstream from the Optical output. This will require using a "Toslink to Mini Toslink" cable for connection only."

"Anyconnect client profile" option missing in ASDM

Hello,
I'm in the process of setting up Anyconnect on the ASA, and have successfully updated the licensing, as well as uploaded the anyconnect pkg for web deployment. I enabled anyconnect on the outside interface and can now have the ASA push the client to the machine. Works fine. However, I want to add backup servers that the client will attempt to reach in the event the primary is down. I understand that "client profiles" can be created to customize settings like this. Problem is, when I follow the configuration guide with instructions for making client profiles at this location:
http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect30/administration/guide/ac02asaconfig.html#wp1289905
It shows that I should have an option for Anyconnect Client Profile and Anyconnect Client Settings.
I don't have either of those options in ASDM. Here's what mine shows:
I have another "SSL Client profiles" option, but it doesn't seem the same as the options above.
Can someone assist with what I need to do to get the Client Profiles option to be available so I can add backup server information to the client? Thanks!

Thanks for the response Marvin,
It shows the ASA and ASDM versions are 8.2 and 6.2 respectively.
Result of the command: "sh version"
Cisco Adaptive Security Appliance Software Version 8.2(1)
Device Manager Version 6.2(1)
Result of the command: "sh act | i Ess"
AnyConnect Essentials : Enabled
I don't have the premium license, just the Anyconnect Essentials and Mobile licenses. I would imagine essentials should have the same profile configuration options, though. If it is in fact because I'm running an older version of ASDM, do I need to update both the ASA IOS and ASDM together, or can I just upgrade ASDM on its own? Thanks again.

Profile option is obsolete in R12

Hi
We have recently migrated from 11.5.10.2 to R12.1.3. Before migration, certain users were able to see the output and log files submitted by other users. But now this is not working. They are not able to see the output of requests submitted by others anymore. This profile option is obsolete in R12. Is there any new profile option to replace this.
Regards

user13551818 wrote:
Chk The Profile option Concurrent:Report Access Level_.
Change the Profile Option value for Concurrent:Report Access Level. Default value for the profile is "User", which means View Output is only accessible by the particular user that submitted the request. Set it to "Responsibility", now the View Output button is enabled from responsiblity where the report is registered.This profile option is no longer used in R12 and it is replaced by RBAC -- Please see the doc referenced above for details.
Thanks,
Hussein

Sign-On: Audit Level Profile Option

Hi,
Sign-On: Audit Level Profile Option after setting at site level to form is not displaying users in user-moniter form why?do i need to bounce anything or do i need to enable some auditing.
Regards

Hi,
like i went in user-profile-system then site is already checked mark by default, i checked mark user gave username as sysadmin(or any other user i want to audit) then came on profle column gave sign% and opened it opened all profiles with Sign-on
Application Responsibilty User
Profile name Site sysadmin
Sign-On:Audit Level Form Form
Sign-On:Notification Yes YesSet "Sign-On:Audit Level" profile option to "FORM" at the Site level only, and bounce the services.
Regards,
Hussein

Oracle Apps 11i Profile Option

Hello All,
I Have install oracle apps 11i Vision Demo ,
I have Problem of Profile Option ,
When i m Enter in Payable Module and click on invoice Batches
it Gives me Error Contact System Administrator to Enable the
Invoice Batach form in Profile Option .
How to Enable Form in Oracle Apps 11i
Thanks
Please Help Me.

To use batches in AP, you need to enable a profile option.
Can not remember the exact name.
Log into system administrator responsibility and find for profiles starting with
AP% you should be able to determine what is related to enabling batches.
Set the profile to Yes

Setting 'MO: Security Profile or MO: Operating Unit profile option' - Urgen

All,
Version: 12.0.4
Module: Purchasing
I'm trying to invoke the PO_CHANGE_API1_S.record_acceptance to send the Advance shipment Notice doc to Oracle R12. On invocation I'm getting the following error
ORA-20001: APP-FND-02902: Multi-Org profile option is required+
set either MO: Security Profile or MO: Operating Unit profile option+
1. How do I set this profile option?
2. Is it required to set both security and OU profile option?
3. At what level(site,appln,resp,user,ou,...) should I set the profile?
Please help me.
Thanks,
Sen

Hi,
You can set those profile options from System Administrator responsibility > Profile > System.
Please see these docs for details.
Note: 602141.1 - R12 - Error ORA-20001, APP-FND-02902 Accessing Profile Classes Form With Multi-Org Access Control (MOAC) Enabled
Note: 338332.1 - App-Fnd:02902: Multi-Org Profile Option Is Required. Ora-20001
Note: 393560.1 - How To Prevent the Profile Option MO: Operating Unit being set to NULL at Site Level?
Regards,
Hussein

Disable profile option updation at user level

I want to disable the profile option HR: Security Profile or for that matter any other profile option at user level. The user should be able to see the value set by the system administrator (Field should be grayed out) and user should not be able to update it.
How to do it??

Try a personalization combined with custom PLSQL, like this:
1) Acces System Profiles
2) Help->Diagnostics->Custom Code->Personalize
3) In the newly displayed Form Personalization form, create a line with a description like this: Prevent modification of USER_VISIBLE_VALUE
4) In the Conditions tab, set Trigger Event = WHEN-NEW-ITEM-INSTANCE
5) Set Trigger Object = PROFILE_VALUES.USER_VISIBLE_VALUE
6) In the Condition text area, enter:
apps.xxror_test_sysprofile(:PROFILE_VALUES.USER_PROFILE_OPTION_NAME,'USER')=1
7) Set Processing Mode to Both
8) Switch to the Actions tab and create two actions:
first:
type = property
description = Don't update
Language=all
enabled=yes
object type=Item
target object=PROFILE_VALUES.USER_VISIBLE_VALUE
property name=UPDATE_ALLOWED
value=false
second:
type=property
description=Don't enter
language=all
enabled=yes
object type=Item
target object=PROFILE_VALUES.USER_VISIBLE_VALUE
property name=ALTERABLE_PLUS
value=false
9) Repeat steps 3-8 if desired for other levels, such as:
Prevent modification of SITE_VISIBLE_VALUE
Prevent modification of APPL_VISIBLE_VALUE
Prevent modification of RESP_VISIBLE_VALUE
Prevent modification of SERVER_VISIBLE_VALUE
Prevent modification of ORG_VISIBLE_VALUE
paying attention to update the corresponding names for xxx_VISIBLE_VALUE.
10) Create the following PLSQL function:
CREATE OR REPLACE function xxror_test_sysprofile (
prof_opt_name in varchar2,
lvl in varchar2
return number
is
v_ret number;
s_prof varchar2(1024);
s_uname varchar2(100);
s_lvl varchar2(10);
begin
-- returns 0 if the user "uname" must be granted access the profile named "prof_opt_name" at the "lvl" level
-- returns 1 if the user "uname" must be forbidden to access such a profile at such a level.
-- important assumption: the "lvl" parameter may have only one of the following values:'SITE', 'APPL', 'RESP', 'USER', 'SERVER', 'ORG'
-- or else this function will return 1, thus forbidding the access
s_uname:=substr(upper(trim(nvl(fnd_profile.value('USERNAME'),''))),1,100);
if s_uname in ('MY_ADMIN_1','MY_ADMIN_2','SYSADMIN') then
v_ret:=0; -- no restrictions
else
     if s_uname in ('MY_POWERUSER_1','MY_POWERUSER_2') then
     -- restrict to only the below mentioned profiles
     s_prof:=substr(upper(trim(nvl(prof_opt_name,''))),1,1024);
          s_lvl:=substr(upper(trim(nvl(lvl,''))),1,10);
          if
          (s_prof like '%WHATEVER%')
          then
               if s_lvl in ('SITE', 'APPL', 'RESP', 'USER', 'SERVER', 'ORG') then
                    v_ret:=0; -- level acceptable for these users on these profiles
               else
                    v_ret:=1; -- unknown level, so reject
               end if;
          else
               -- these users may not access these profiles, so reject
               v_ret:=1;
          end if;
     else
          if s_lvl = 'SITE' then
          -- no way any other user than those above may modify site-level profiles
          v_ret:=1;
          else
               -- any other user than those above may modify lower-level profiles, but
               -- for now reject all
               v_ret:=1;
          end if;
     end if;
end if;
return v_ret;
end;
Pls be aware that testing first on a test instance is always advisable.

Profile options at USER level in EBS r12

Hi Gurus
I'm an new to Oracle EBS can some one help with this,
1. Turn on debugging using the following profile options at USER level :
FND: Debug Log Enabled : Yes
FND: Debug Log Level : Statement
2. Run the Create Accounting Program
3. Derive debug message using the following query and upload in excel format :
SELECT substr(module,1,70), MESSAGE_TEXT, timestamp, log_sequence
FROM fnd_log_messages msg, fnd_log_transaction_context tcon
WHERE msg.TRANSACTION_CONTEXT_ID = tcon.TRANSACTION_CONTEXT_ID
AND tcon.TRANSACTION_ID = <’Accounting program ‘ request ID>
ORDER BY LOG_SEQUENCE
4. Upload the LOG and OUTPUT files for the :
- Create Accounting
- Accounting Program
Will be waiting for you reply.
Best Regards
Babu.

Hi Babu,
FND: Debug Log Enabled : Yes
FND: Debug Log Level : Statement
- Navigate to sysadmin responsibility > profile > system
- Find for the respective profiles eg: FND: Debug Log Enabled
- Set your desired value.
2. Run the Create Accounting Program
Run the create accounting conncurrnet program View > Request > New from the respective module
SELECT substr(module,1,70), MESSAGE_TEXT, timestamp, log_sequence
FROM fnd_log_messages msg, fnd_log_transaction_context tcon
WHERE msg.TRANSACTION_CONTEXT_ID = tcon.TRANSACTION_CONTEXT_ID
AND tcon.TRANSACTION_ID = <’Accounting program ‘ request ID>
ORDER BY LOG_SEQUENCE
Run this query from backend, and provide the Concurrent ID of the Create accounting program (replace this at <’Accounting program ‘ request ID>)
- Create Accounting
- Accounting Program
Upload the the logfile and output files of the respective program and the output of the above query.
I believe this is an action plan from the SR, you may also get the assistance from the SR itself and they will help you. Anyways let us know if you need any assistance
Thanks &
Best Regards

Unable to Enable profile option

Similar Messages

Maybe you are looking for