Unable to encode and render

I am using a 1.8mhz imac and running ilife 5.0. I created my movie in imovie HD click on the idvd button and then create idvd project. When I check under the status pane in idvd the project won't encode and render. In other words the blue status bar stays clear and I never see a blue progress signal moving under the status sign. As a result I can never burn the project. I took all my data to another computer and it worked fine? What's wrong with my mac? Thanks.

check to see if "enable background encoding" is checked, in iDVD preferences. If Best Quality is selected your project will not encode until you burn your DVD. Personally I always use Best Quality and have no problems burning. Of course this does not explain why your project didn't burn in the first place but may allow you to burn now.
Robyn

Similar Messages

Unable to conform and render files

I am using Premiere Pro cs4 version 4.0.0 314 (MC:160820).
I am trying to edit files that have been previously been created but when I open the files (MTS files, ai, files etc) they won't load, and when I try to render them (render effects in work area or render entire work area) it either does nothing or I get this error message:
I did a software update but this didn't do anything. I have never had this problem before and it's happening to quite a few files that I'm trying to open. When links are missing it will always ask me for 'Where is file 'Rendered - 413039-49059-696873.mpeg'? for example but this never used to be a problem. I can't even start from scratch as when I import files it is doing the same thing..
If anyone is able to help that would be much appreciated!

Might want to read this.
http://kb2.adobe.com/cps/906/cpsid_90670.html

Can I apply and render batch effects in media encoder?

Hi I'm using Adobe premiere cs6.5 and media encoder. I would like to add an unsharpen mask effect to all my clips and render them out in a batch process in media encoder. Is there a way to do this with out physically handling each individual file?
Thanks

Don't think so in CS6.5.
IN CC2014xx one would apply it to all clips selected/grouped in the Bin as a Master Clip Effect... then send those clips to AME

Since new update - Adobe Media Encoder and CUDA not working

CUDA not launching - Premier CC says that only software will work. Media encoder crashes on launch. Re-installed both.
Nvidia 670 GTX

What version of Premiere Pro? Include the minor version number (e.g., Premiere Pro CS5.5 with the 5.5.2 update).
Premier Version 7.2.2 (33)
Have you installed the recent updates? (If not, you should. They fix a lot of problems.)
Problem started after I installed the software updated
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
Windows 7 Ultimate - SP1
What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime".
REDCODE .r3d from R1 - RedCode 28
If you are getting error message(s), what is the full text of the error message(s)?
Adobe Media Encoder Has Crashed - please contact your system administrator. This graphics card is not supported, CUDA disabled.
What were you doing when the problem occurred?
Booting premier pro, opening a new project, when trying to render using the encoder
Has this ever worked before?
Yes worked fine before 7.2.2 update
What other software are you running?
Chrome, Media Player
Do you have any third-party effects or codecs installed?
RED Giant Universe is installed
Tell us about your computer hardware. Be especially certain to tell us about third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU).
i7 3930k 12 Core, Nvidia 670 GTX 4GB, 32GB Corsair 1866 RAM, RAID HDD
Are you using Mercury Playback Engine GPU Acceleration?
YES - Nvidia 670GTX video card
Does the problem only happen with your final output, with previews, or both?
Problem Occurs when rendering the final output for the Medi Encoder and the GPU issue when I open a new project that used to use Mercury
I also cannot seem to find the file within Premier Pro for "supported Cards" - I had this issue before and I just added my card to this list, this list seems to be missing.
Thank you.

Exporting to Media Encoder and file locating issue

Ok, Now I've read a LOT of threads trying to find a solution to this but none of them have answered my problem exactly, so here's what I have:
Running a New computer with a clean install of Windows 7 64 bit and Adobe CS4 Master Suite
Hardware:
Dell Precision M6400
Intel(R) Core(TM)2 Duo CPU T9900 @ 3.06 Ghz, 3.07 Ghz
12.0 GB Ram
Premiere ran fine for a while, but soon I've run into a problem where I try to export to the Media Encoder and I keep getting the error:
"Could not read from the source. Please check if it has moved or been deleted" over and over
I have deleted recently imported media one at a time to try and locate what's causing it since it wasn't doing this before, but no luck. So I restarted the program but now the Premiere project won't open. The task bar loads until about 2/3 in and stops there indefinitely, I've left and came back to it 2 hours later and it hadn't moved. I back tracked and found a previous save that will open, but it still will not export, it still says "Could not read from the source. Please check if it has moved or been deleted". And as soon as I update anything and save a new file that one will not open either.
I've tried recompressing each video file into a format I know works well with Premiere but still no difference.
This problem has plagued my workflow for a while now and I can't take it anymore. I've had to restart clean project files to try to work around it but I lose so much progress, and the work around by rendering the premiere file through After effects hasn't worked either. The error I get there says "Dynamic link server is busy".
Here's what the problem is not: It is not because I uninstalled CS3 or any other previous version, I've never had it on this computer. It's not a plugin problem, I don't have any plugins on this install except for the default ones that Came with Adobe Master Suite for Premiere Pro.
Someone please help me, this is ridiculous that I have had to trouble shoot the program this much. Both CS4 and Windows 7 have been around for over a year now and neither are in Beta Editions

Wow, sorry, forgive me if I've seen most forums work with a lot less, and your dismissiveness led me to assume you hadn't read my post.
All of this is new and up do date as far as Adobe and Windows updates go, that's Version 4.2.1.
My projects for this are all in NTSC Widescreen DV 24P, the particular sequence that I render from is in that format as well, although regardless of which one I use the problem keeps occurring.
My renders for my recent purposes have been compressed in .h264, IPOD video Large. The codec I'm rendering in also doesn't seem to matter, because I've tried this in .avi., .mov, .h264, .wav, etc. and all with various settings that I thought might help, but the encoder quits encoding 4 seconds in and gives me the error that it can't find the media.
And I didn't mention the media type and what not because it seems irrelevent of what I use this problem keeps happening. I'm pretty sure it's a problem with the project file or perhaps the media encoder or both.
And I don't know what you mean by "disks"
Do I have a Raid set up on my hard disk? No, I have two 0.5 TB hard drives, Programs on one (C:\) Projects on the other (D:\).
What address am I saving the scratch disks to? I use the default of "same as Project". Have I tried Clearing it? Yes.
I don't think I'm getting at what you're asking.
And I don't think I've ever used an .xlsm (which is excel?) file and I've definitely never used a Power point project (PPS?) file in my projects. And they open in their respective programs, although I'm not sure why you asked about that. Again I'm not sure I know what you mean.
The Premiere Project (.prproj) file is what I'm trying to open when the progress bar stops at 2/3 the way through and forces me to terminate the process with the task manager to close it.
It would help to mention that all my projects are animated and I use premiere to cobble them together, so no problems that relate to transferring media from a camera to the computer would apply here. Most of the files I get out of Maya are in Default .avi or .mov files, and I also use a handful of .wav files for the dialogue and .jpgs for cards and placeholders.
I believe that this problem began when I updated a few of the files in my project, but I've been doing that for weeks without incident. I've been updating them by saving over the old media file with the updated one of the same name, length, and type.
I don't work exclusively with Premiere, in fact it's not what I usually use, that would be Final Cut Pro.

URL Encoding and Decoding in OSB

Hi,
Do we have out-of-box solution in OSB to decode XML which is URL encoded and encode XML to URL encoding. If so how can I do it.
This might be basic question. I am unable to figure out. new to OSB.
Thanks
Sham.

Hi Sham,
Probably these are what you looking for...
fn-bea:inlinedXML()
fn-bea:serialize()
fn-bea:serialize() to represent an XML document as a string
fn-bea:inlinedXML() to parses textual XML and returns an instance of the XQuery 1.0 Data Model.
Supported Function Extensions from Oracle
http://docs.oracle.com/cd/E23943_01/admin.1111/e15867/xquery.htm#i1101407
Oracle’s XQuery Implementation
http://docs.oracle.com/cd/E13162_01/odsi/docs10gr3/xquery/extensions.html
Cheers,
Vlad
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts)
https://forums.oracle.com/forums/ann.jspa?annID=893

Bit Depth and Render Quality

When you finally export media to some sort of media format via the encoder does the projects preview Bit Depth and Render Quality settings affect the output file?
I know there is "Use Preview files" setting in the media exporter dialogue but I just want to be sure of what I am doing.

Jeff's response is my perspective, as well, which is both backed up by my own tests and the official Adobe word.
Exhibit A: My Tests
That is DV footage with a title superimposed over it in a DV sequence, with a Gaussian blur effect (the Premiere accelerated one) applied to the title; all samples are from that sequence exported back to DV. This was to show the relative differences of processing between software and hardware MPE, Premiere export and AME queueing, and the effect of the Maximum Bit Depth and Maximum Render Quality options on export (not the sequence settings; those have no bearing on export).
The "blooming" evident in the GPU exports is due to hardware MPE's linear color processing. I think it's ugly, but that's not the point here. Further down the line, you can see the effect of Maximum Bit Depth (and MRQ) on both software MPE and hardware MPE. I assume you can see the difference between the Maximum Bit Depth-enabled export and the one without. Bear in mind that this is 8-bit DV footage composited and "effected" and exported back to 8-bit DV. I don't understand what your "padding with zeroes" and larger file size argument is motivated by--my source files and destination files are the same size due to the DV codec--but it's plainly clear that Maximum Bit Depth has a significant impact on output quality. Similar results would likely be evident if I used any of the other 32-bit enabled effects; many of the color correction filters are 32-bit, and should exhibit less banding, even on something 8-bit like DV.
Exhibit B: The Adobe Word
This is extracted from Karl Soule's blog post, Understanding Color Processing: 8-bit, 10-bit, 32-bit, and more. This section comes from Adobe engineer Steve Hoeg:
1. A DV file with a blur and a color corrector exported to DV without the max bit depth flag. We
will import the 8-bit DV file, apply the blur to get an 8-bit frame,
apply the color corrector to the 8-bit frame to get another 8-bit frame,
then write DV at 8-bit.
2. A DV file with a blur and a color corrector exported to DV with the max bit depth flag. We
will import the 8-bit DV file, apply the blur to get an 32-bit frame,
apply the color corrector to the 32-bit frame to get another 32-bit
frame, then write DV at 8-bit. The color corrector working on the 32-bit
blurred frame will be higher quality then the previous example.
3. A DV file with a blur and a color corrector exported to DPX with the max bit depth flag. We
will import the 8-bit DV file, apply the blur to get an 32-bit frame,
apply the color corrector to the 32-bit frame to get another 32-bit
frame, then write DPX at 10-bit. This will be still higher quality
because the final output format supports greater precision.
4. A DPX file with a blur and a color corrector exported to DPX without the max bit depth flag.
We will clamp 10-bit DPX file to 8-bits, apply the blur to get an 8-bit
frame, apply the color corrector to the 8-bit frame to get another
8-bit frame, then write 10-bit DPX from 8-bit data.
5. A DPX file with a blur and a color corrector exported to DPX with the max bit depth flag.
We will import the 10-bit DPX file, apply the blur to get an 32-bit
frame, apply the color corrector to the 32-bit frame to get another
32-bit frame, then write DPX at 10-bit. This will retain full precision through the whole pipeline.
6. A title with a gradient and a blur on a 8-bit monitor. This will display in 8-bit, may show banding.
7. A title with a gradient and a blur on a 10-bit monitor
(with hardware acceleration enabled.) This will render the blur in
32-bit, then display at 10-bit. The gradient should be smooth.
Bullet #2 is pretty much what my tests reveal.
I think the Premiere Pro Help Docs get this wrong, however:
High-bit-depth effects
Premiere Pro includes some video effects and transitions
that support high-bit-depth processing. When applied to high-bit-depth
assets, such as v210-format video and 16-bit-per-channel (bpc) Photoshop
files, these effects can be rendered with 32bpc pixels. The result
is better color resolution and smoother color gradients with these
assets than would be possible with the earlier standard 8 bit per
channel pixels. A 32-bpc badge appears
to the right of the effect name in the Effects panel for each high-bit-depth
effect.
I added the emphasis; it should be obvious after my tests and the quote from Steve Hoeg that this is clearly not the case. These 32-bit effects can be added to 8-bit assets, and if the Maximum Bit Depth flag is checked on export, those 32-bit effects are processed as 32-bit, regardless of the destination format of the export. Rendering and export/compression are two different processes altogether, and that's why using the Maximum Bit Depth option has far more impact than "padding with zeroes." You've made this claim repeatedly, and I believe it to be false.
Your witness...

Unable to decode and import the selected wav/mp3 file

I am trying to import mp3's into a Captivate 3 presentation
but keep getting this error "Unable to decode and import the
selected wav/mp3 file." I am using the same mp3 files that I have
used many times with projects in Cap1 and Cap2. I have converted
the files to wav's and tried but I'm still getting the same
message. I have a deadline and I'm stumped.
Any ideas?

Hi DianaUNC
Interesting. I've seen it happen with WAV files but not MP3.
Do you still have Captivate 2 around? If so, do these successfully
import into Captivate 2? One thought was that you might pop them
into something like Audacity and save them out again. Perhaps
something is amiss with the encoding used.
Or you might try the trick of opening them in Windows Sound
Recorder and saving them out of that in a different format. I know
that works with one particular WAV file I have.
Cheers... Rick

PDF file converter...why is everything encoded and how do I change this?

I recently downloaded Adobe 'export file' to word. Everytime I open a PDF attatchment of any kind, it's encrypted/encoded and imossible for me to read. How do I fix this problem? I've spent many hours looking for help online to no avail. Any help is grealty appreciated. Thank you!!!

If you are unable or unwilling to upgrade to Microsoft Office 2011, consider installing Snow Leopard (with Rosetta) into Parallels 7 in Lion:
[click on image to enlarge]
Office 2011 is known to sometimes scramble legacy Office data files. For example, I access an Excel 2004 Chart on a weekly basis that is trashed when I attempt to open it in Excel 2011. I open it in Excel 2004 in the Snow Leopard virtualized environment, modify it and save it for the next weekly access.
Full Snow Leopard installation instructions:
http://forums.macrumors.com/showthread.php?t=1365439

Unable to encode

Hey guys
I built a project in DVD SP on an external hard drive using one of the computers at school. Once the school was done I bought DVD SP for home and when I opened the external hard drive and wanted to burn a dvd at home it said that is unable to encode a few of the clips (almost half) that I had in my project.
The clips (Quick Time files) were always on the external hard drive and never taken out on the school computer. Also, never changed... Although I use the same external hard drive on the computer at home it doesn't let me build/ the project.
I tried renaming the files and bringing them back but I still have the same problem.
Does anyone know how to fix this problem?
Thanks a lot guys! The project that I am working on is actually my portfolio and I really need to get it done this week.
Thank you,
Sorin

What version of DVDSP are you using? And how did you manage to purchase just that program? The current version of DVDSP is only available as part of Final Cut Studio.
What format are your source clips? They could be using a codec that is only licensed and installed with Final Cut Pro.
Open one of the problematic clips in Quicktime Player, then Press Command i to Get Info. Look at the format information and post it as a reply in this thread.

CS4 unable to encode videos after upgrading from CS3

CS4 was unable to export and encode a video after upgrading from CS3. The error message indicated the the file could not be found. To fix this problem do the following. Create a short cut to adobe premiere pro (executable program) named "Premiere" Then place the short cut in the folder C:Program Files/Common Files/Adobe/dynamiclink After doing this my version worked fine.

The problem mainly occures when one then removes the CS3 version of Adobe Premiere. I have found a tech note on this problem at:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb407106&sliceId=2

Unable to encode CAPWAP Control Address

Hi All:
My WLC already firmware already update to latest version 6.0 and the management ip and ap manager ip in the same subnet, DNS record already have the CISCO-LWAPP-CONTROLLER and CISCO-CAPWAP-CONTROLLER A record.But Some lightweight AP cannot join the WLC and the error message in WLC as below :
debug capwap*Aug 11 20:01:01.289: Join resp: Unable to encode CAPWAP Control IPV4 Address
*Aug 11 20:01:01.289: 00:21:d8:44:29:b0 Failed to encode Join response to 172.16
.73.54:29282
*Aug 11 20:01:01.290: 00:21:d8:44:29:b0 Config Response Failure: Unable to send
Join response to 172.16.73.54:29282
The Error code is :
%CAPWAP-3-ENCODE_ERR
%CAPWAP-3-DECODE_ERR
Any one can tell me what's happen by these log from WLC ?

Error Message %CAPWAP-3-ENCODE_ERR: Failed to encode [chars] to AP
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]
Explanation Due to an internal error, a CAPWAP message could not be transmitted.

ERROR Message "UNABLE TO OPEN" and "E_IO_Cannot_Open"

Trying to download 6 ebooks from Hive and I can download the acsm file but when I click that I get an error message "Unable To Open" and "E_IO_Cannot Open." The computer is authorised and uses Win 7 with ADE 3. I tried ADE 4 but no better. I have an older PC using Vista and ADE 2 and that will download okay but it is constantly being used so it is not convenient. Does anybody know what's wrong? Thanks.

Hello,
To try to help you, please, could you give some more informations ?
- the operating system (XP/Vista), the edition ( Pro/Home...) and the service pack
- usually, the installer installs the both files in C:\Program Files\Microsoft Sql Server\Samples. Is there any change in the location or have you moved the both files ?
- could you check with the files explorer , that the 2 files are read-write and not read only( find one file, right-click on it, properties and in the 1st tabpage, you should see a checkbox read-only ( if checked , unchecke it ) ?
- have you Sql Server Management Studio Express Edition ( at least SP1 ) ?
If no, download it and use it to attach
in the object explorer,
click on your instance to expand it
right click on databases
in the contextual menu, click on attach
in the new form,click on add
you arrive on a second form : find your file , click on it, and OK
it's the simplest way to attach ( the sp_-attach_db is complicated to type )
the error messages are sometimes more clear in SSMSEE than in Sqlcmd
Try also to attach ( thru SSMSEE or Sqlcmd but in using the windows authentification )
NB: i hope that you are not trying to attach AdventureWorks on a remote instance and on a remote computer ( it would explain access denied )
We are waiting for your feedback to try to help you more efficiently
Have a nice day

The images imported to my stage turn up as blank and render every image previous to the rogue imported image as red squares that fill the perimeters of the image which then renders the publishing and scene testing features in flash useless, what can i do

I have been working on animating a scene in flash for a few weeks and recently I have encountered a problem with importing my images on to the stage where the images I import do not turn up, however the key frame that I attempted to import the image onto shows that it is occupied by an image and every frame previous to the key frame that just imported an image that does not show turns up as a red square that fills the original perimeters of the image, there is no solution to this problem any where on the forum and the adobe technical support staff will not help me find a solution to this problem what can I do to get Flash running normally again and fix this problem?????
Also after the first time i publish a preview after i begin using flash, flash renders the publishing and scene testing features as useless and claims that there is no HTML template found, or if the images if i import any images onto the stage that come up blank and render every image previous to that image as a red square and then try and publish a preview flash renders the publishing and scene testing features as useless and claims that there is no HTML template found. What can I do to fix this problem??? there is no solution on the web anywhere to this problem either.

I don't know if Flash has a memory limit of its own. The memory for your Flash file is based on the available memory on your computer.
There is a limit on the number of frames that you can have in any given timeline. I think that it's about 15000 frames, but that's a guess. Flash does all of its work at runtime, this means that no part of your animation is pre-compiled like it is in a video file. So the more objects that you have on the stage, the more work Flash has to do. It follows that the more objects that there are to animate, the more work your processor and the video card have to do.
Here's a list of articles on memory management that might be useful:
Garbage collection internals for Flash Player and Adobe AIR | AdobeDeveloper Connection
actionscript 3 - What are good memory management techniques in Flash/as3 - Stack Overflow
AS3 Memory Management Tips

Unable to drag and drop any thing in my Itunes latest version 10.6 in windows 7

Unable to drag and drop any thing in my Itunes latest version 10.6 updated on 29th march 2012. unable drag and drop songs in play list..... can any one help me to solve this issue.In windows 7

Make sure your windows userid has full control and ownership over the entire music folder. Check the box to apply this to subcontainers (aka subfolders)
This webpage has directions
http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/P2/
You need to restart itunes to read hte new permission settings.

Unable to encode and render

Similar Messages

Maybe you are looking for