Unable to encode

Hey guys
I built a project in DVD SP on an external hard drive using one of the computers at school. Once the school was done I bought DVD SP for home and when I opened the external hard drive and wanted to burn a dvd at home it said that is unable to encode a few of the clips (almost half) that I had in my project.
The clips (Quick Time files) were always on the external hard drive and never taken out on the school computer. Also, never changed... Although I use the same external hard drive on the computer at home it doesn't let me build/ the project.
I tried renaming the files and bringing them back but I still have the same problem.
Does anyone know how to fix this problem?
Thanks a lot guys! The project that I am working on is actually my portfolio and I really need to get it done this week.
Thank you,
Sorin

What version of DVDSP are you using? And how did you manage to purchase just that program? The current version of DVDSP is only available as part of Final Cut Studio.
What format are your source clips? They could be using a codec that is only licensed and installed with Final Cut Pro.
Open one of the problematic clips in Quicktime Player, then Press Command i to Get Info. Look at the format information and post it as a reply in this thread.

Similar Messages

  • Unable to encode CAPWAP Control Address

    Hi All:
    My WLC already firmware already update to latest version 6.0 and the management ip and ap manager ip in the same subnet, DNS record already have the CISCO-LWAPP-CONTROLLER and CISCO-CAPWAP-CONTROLLER A record.But Some lightweight AP cannot join the WLC and the error message in WLC as below :
    debug capwap*Aug 11 20:01:01.289: Join resp: Unable to encode CAPWAP Control IPV4 Address
    *Aug 11 20:01:01.289: 00:21:d8:44:29:b0 Failed to encode Join response to 172.16
    .73.54:29282
    *Aug 11 20:01:01.290: 00:21:d8:44:29:b0 Config Response Failure: Unable to send
    Join response to 172.16.73.54:29282
    The Error code is :
    %CAPWAP-3-ENCODE_ERR
    %CAPWAP-3-DECODE_ERR
    Any one can tell me what's happen by these log from WLC ?

    Error Message %CAPWAP-3-ENCODE_ERR: Failed to encode [chars] to AP
    [hex]:[hex]:[hex]:[hex]:[hex]:[hex]
    Explanation Due to an internal error, a CAPWAP message could not be transmitted.

  • CS4 unable to encode videos after upgrading from CS3

    CS4 was unable to export and encode a video after upgrading from CS3.  The error message indicated the the file could not be found.  To fix this problem do the following.  Create a short cut to adobe premiere pro (executable program) named "Premiere"     Then place the short cut in the folder C:Program Files/Common Files/Adobe/dynamiclink    After doing this my version worked fine.

    The problem mainly occures when one then removes the CS3 version of Adobe Premiere.   I have found a tech note on this problem at:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=kb407106&sliceId=2

  • Unable to encode and render

    I am using a 1.8mhz imac and running ilife 5.0. I created my movie in imovie HD click on the idvd button and then create idvd project. When I check under the status pane in idvd the project won't encode and render. In other words the blue status bar stays clear and I never see a blue progress signal moving under the status sign. As a result I can never burn the project. I took all my data to another computer and it worked fine? What's wrong with my mac? Thanks.

    check to see if "enable background encoding" is checked, in iDVD preferences. If Best Quality is selected your project will not encode until you burn your DVD. Personally I always use Best Quality and have no problems burning. Of course this does not explain why your project didn't burn in the first place but may allow you to burn now.
    Robyn

  • Unable to encode to MPEG2-DVD

    When attempting to dynamic link to Media Encoder, either directly from Premiere Pro, or importing prproj sequence directly into AME, only .aac audio settings land in the process queue, with option to encode video grayed out. Attempting to change encode settings in the AME process queue does not give options for MPEG2 DVD.
    Anyone experience this issue?
    Thanks!

    I would advise skipping Dynamic Link for this and exporting directly from PP.

  • Having major issues with Adobe Media Encoder (AME) - exporting with weird image flickering/colour anomalies, crashing regularly, freezing during encode...!

    Hi Guys
    I am having some real issues with Adobe Media Encoder (AME) at the moment.  It appears that I am unable to encode an h.264 for Vimeo from a Premiere Pro Project file at the moment without at least some weird image issues that are not supposed to be there.  These include weird flickering, colour changes, artefacts etc.  This is if I am lucky...often I am unable to get the process to complete as the application either crashes and tells me there has been a problem or it simply freezes and I have to force quit the application and often restart my machine.
    The problem seems to not to just be with h.264 for the web encodes but also with BluRay h.264 as well. As yet I haven't seen if there is a problem with MPEG-2 for DVD so I will check this out too!
    Does anyone else see this happening or does anyone know what might be the problem?
    I thought the Premiere Pro project might have been corrupt so tried a different project but the same issues were happening here too.
    Any help would be really gratefully received.
    Cheers
    EDIT - I have just found this online which is exactly the problem I am having! Thanks a bloody bunch Apple! 10.9.3 causing headaches for Mac Pro users | MacIssues
    Message was edited by: Alex Cameron

    Agreed, I now have a project to GET OUT, and AME crashes consistently 1/3 into the render. It appears to halt all processing after (real time) 00:02:30
    Am seriously considering uninstalling CC as I am beginning to find other issues in some apps, and going back to CS6/MC just so I can get work out. Durn it Adobe this is AWFUL!!
    Alright, let's try to be constructive instead of throwing rocks... but the frustration level is high, and I have material on deadline. Let's get with this, guys...
    What OS Win7, 64-bit
    What version of AME/PPro (Please be specific by getting the full version number in the About Adobe Media Encoder screen) 8.2.0.54 Ppro: 8.2.0 (65)
    When is it crashing (Again, the more detail here about where it was in the encoding process the better) roughly 1/3 into the sequence, always on exactly the same frame - tried replacing the clip with something different to see if it was a timeline error, and NO EFFECT.
    What is your source (PPro project or media file (what kind?)) PPro
    If the source if a PPro project, does it work when exporting directly from PPro? NO
    What format are you exporting to? H.264, QT, WM, tried everything my client can play.
    Do other formats work? MPEG2, QuickTime, etc? NO
    Have you tried with GPU rendering on? How about turning it off by switching to Software-only mode? Mine doesn't have any choice, it's software-only.
    Have you tried disabling Native Sequence Loading? (AME Preferences: General > Enable Native Sequence Loading) No effect
    Other things I tried: uninstalling/reinstalling AME, setting cache to a fast local disk.

  • Compressor not encoding Multiplexed MPEG-2 files after 10.4.9 update???

    When I try to encode a multiplexed MPEG-2 file (e.g., checking the 'Multiplexed MPEG-1/Layer 2 Audio' box under 'Extras'), Quicktime is unable to open the Compressor generated file and produces the following error (which has helped significantly with troubleshooting the issue):
    Error opening movie
    The movie could not be opened.
    Fortunately, MPEG Streamclip is able to open the file -- and provides the following alert:
    One or more transport stream files have a bad size. Do you want to open them anyway?
    This usually happens when a file is incomplete.
    As an experiment, I generated two multiplexed MPEG-2 files - one with Compressor and the other with MPEG-Streamclip, both were identical in file size...but the Compressor generated file won't open. Is anyone else running into this issue?
    Seemed to work before upgrading to 10.4.9.
    Running Compressor 2.3 (and all my other software is completely up to date). Even tried reinstalling the Compressor 2.3 updater.
    MacBook Pro 15" 2GHz   Mac OS X (10.4.9)  

    I also experienced a similar issue.
    Compressor was unable to encode a CBR 8mb/s, multiplex job. It rendered log results that said "Failed: 3x service crash". However, it still produced a m2t file. Compressor could not open this file (even though I have the quicktime mpeg 2 component installed). MPEG Streamclip was able to open the file, but it was not the same duration of the original file.
    I tried the same process for settings of 25mb/s CBR multiplex. This time compressor was successful. Compressor still could not open the resultant m2t file. MPEG Streamclip was able, as it was with my 8mb/s m2t file, but this time MPEG Streamclip warned me of opening a "Bad Movie..." I opened anyway and was able to view the entire video. However, Streamclip does not seem to offer options for encoding to MPEG. Meaning, there's no way to dictate the bit rate or other specs.
    The long and short of it; I hope apple figures this one out, because I don't want to have to use another product like Cleaner or BitVice.
    Any advice out there?

  • SSL CertGen & Private key import errors - 7.0

    I am trying to install weblogic generated ssl certificate and because the private
    key needs to be encrypted with a password, i am loading this in a new JDK keystore
    and trying to configure WL.
    I am running utils.CertGen from weblogic 7.0 sp3 on XP.
    X:\SSLTest>java utils.CertGen testpassword testcert testkey
    Creating Domestic Key Strength - 1024
    ..... Certificate CommonName will contain Hostname KUNDULA_M-DGS
    Encoding
    Created Private Key files - testkey.der and testkey.pem
    com.rsa.certj.cert.CertificateException: Cannot build Cert Request Info: Unable
    to encode X500Name.
    at com.rsa.certj.cert.PKCS10CertRequest.getCertRequestInfoDEREncoding(PKCS10CertRequest.java:824)
    at com.rsa.certj.cert.PKCS10CertRequest.signCertRequest(PKCS10CertRequest.java:1082)
    at utils.CertGen.createCertificateRequest(CertGen.java:312)
    at utils.CertGen.processCommand(CertGen.java:185)
    at utils.CertGen.main(CertGen.java:170)
    com.rsa.certj.cert.CertificateException: Cannot build Cert Request Info: Unable
    to encode X500Name.
    at com.rsa.certj.cert.PKCS10CertRequest.getCertRequestInfoDEREncoding(PKCS10CertRequest.java:824)
    at com.rsa.certj.cert.PKCS10CertRequest.signCertRequest(PKCS10CertRequest.java:1082)
    at utils.CertGen.createCertificateRequest(CertGen.java:312)
    at utils.CertGen.processCommand(CertGen.java:185)
    at utils.CertGen.main(CertGen.java:170)
    I went ahead and ran the same CertGen on unix and got the certificate file and
    the key file
    to my box to check to see if i can install it. I created a new keystore with keytool,
    loaded the private key with the alias and the password phrase, made this key store
    the default keystore, supplied the management password, changed the files to read
    the new cert file and key file.
    Attached is the log for the SSL debug.
    Do i need to import the private key stored in the JDK for weblogic ? I tried doing
    that by running.
    X:\>java utils.ImportPrivateKey X:\bea\user_projects\mydomain\mystore.jks mypass
    myalias pvtPasswd X:\bea\user_projects\mydomain\localcert.pem X:\bea\user_projects\mydomain\localkey.pem
    ImportPrivateKey will use existing X:\bea\user_projects\mydomain\mystore.jks
    ImportPrivateKey failed, java.security.KeyManagementException: ASN.1: Unxpected
    ASN.1 tag
    java.security.KeyManagementException: ASN.1: Unxpected ASN.1 tag
    at com.certicom.security.cert.internal.x509.SSLPlusSupport.getLocalIdentityPartial(Unknown
    Source)
    at com.certicom.net.ssl.CerticomContextWrapper.inputPrivateKey(Unknown
    Source)
    at utils.ImportPrivateKey.importKey(ImportPrivateKey.java:76)
    at utils.ImportPrivateKey.importKey(ImportPrivateKey.java:44)
    at utils.ImportPrivateKey.main(ImportPrivateKey.java:32)
    X:\>
    Attached log is SSL debug enabled and it cant see the private key.
    Any help is appreciated.
    thanks,
    mallik
    [ssldebuglog.txt]

    "Mallik" <[email protected]> wrote in message
    news:3f3274e9$[email protected]..
    >
    I am trying to install weblogic generated ssl certificate and because theprivate
    key needs to be encrypted with a password, i am loading this in a new JDKkeystore
    and trying to configure WL.
    I am running utils.CertGen from weblogic 7.0 sp3 on XP.
    X:\SSLTest>java utils.CertGen testpassword testcert testkey
    Creating Domestic Key Strength - 1024
    ..... Certificate CommonName will contain Hostname KUNDULA_M-DGS
    Encoding
    Try this on 8.1 and see if it works. There was a bug fix with respect to "_"
    in hostnames.

  • Why do Hebrew language characters show as question marks?

    On my office web, when an email from Israel is posted , the title is shown as question marks. When I respond or forward a Hebrew text it also comes up as question marks

    Mail encoding suffer from some problems that doesn't exists on the web. It is possible that you are getting these messages from outdated mail software that is unable to encode subjects correctly.
    If this is the case, you may get Hebrew messages correctly, but from some users get it with some encoding problems. I do remember that users whose used hotmail.com was affecting such problems, but I guess Microsoft have fixed it already. On the other hand, some popular web forums software that use email notifications sometimes doesn't encode subjects correctly, and this issue also apply to the software in use by some spammers (but I'd care less about spammers…).

  • AP join to AP-Manger IP

    Hi all:
    i meet a problem is that all my lightweight ap join the controller with AP-Manager IP but i pretty sure the DNS a record is point to the management ip of controller ,not the AP-Manager IP.
    The log show as below :
    *Aug 11 19:11:12.470: %CAPWAP-3-ERRORLOG: Go join a capwap controller
    *Aug 11 19:11:12.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.16.1.42 peer_port: 5246
    *Aug 11 19:11:13.402: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 172.16.1.42 peer_port: 5246
    *Aug 11 19:11:13.403: %CAPWAP-5-SENDJOIN: sending Join Request to 172.16.1.42
    *Aug 11 19:11:13.403: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
    *Aug 11 19:11:13.408: %DTLS-5-ALERT: Received WARNING : Close notify alert from 172.16.1.42
    *Aug 11 19:11:13.408: %DTLS-5-PEER_DISCONNECT: Peer 172.16.1.42 has closed connection.
    Please help to verify and let me know what's the problem here, thanks a lot!

    Hi dancampb :
    Many thx for your message , i am clearly now. But My controller still close the AP join request by the error log as below :
    *Aug 11 20:01:01.289: Join resp: Unable to encode CAPWAP Control IPV4 Address
    *Aug 11 20:01:01.289: 00:21:d8:44:29:b0 Failed to encode Join response to 172.16
    .73.54:29282
    *Aug 11 20:01:01.290: 00:21:d8:44:29:b0 Config Response Failure: Unable to send
    Join response to 172.16.73.54:29282
    *Aug 11 20:01:01.292: 00:21:d8:44:29:b0 State machine handler: Failed to process
    msg type = 3 state = 0 from 172.16.73.54:29282
    *Aug 11 20:01:01.292: Failed to process CAPWAP packet from 172.16.73.54:29282
    *Aug 11 20:01:01.292: Failed to process packet from 172.16.73.54:29282
    *Aug 11 20:01:01.295: Discarding non-ClientHello Handshake OR DTLS encrypted pac
    ket from 172.16.73.54:29282)since DTLS session is not established
    Many thx for all of your help , Please help to see the error in my WLC and i attach the capwap log file from WCL.

  • WLC dropping AP's

    I have 4 WLC's all running F/W 7.0.250.0 there has been some very strange problems with them recently. Every 10-20 minutes one of the controllers will drop all of its AP's and then they will roll over and find a new controller. It seems to be random as to which controller will drop its ap's. I've enabled debugging on them and have a log to post, and need help making sense of it. I went through all of the debugging options and enabled everything that had an error option, so the log might be bloated.
    *apfReceiveTask: Jul 01 10:02:30.471: 14:99:e2:57:54:7c New client (policy)
    *apfReceiveTask: Jul 01 10:02:30.472: 14:99:e2:57:54:7c fap IP change from 0 to adc3200 for client 14:99:e2:57:54:7c
    *ccxL2RoamTask: Jul 01 10:02:30.474: 14:99:e2:57:54:7c Mobile 14:99:e2:57:54:7c has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:02:30.475: 14:99:e2:57:54:7c Mobile 14:99:e2:57:54:7c has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *spamReceiveTask: Jul 01 10:02:31.648: 00:26:0b:10:0d:10 Duplicate sequence number in request message
    *apfMsConnTask_0: Jul 01 10:02:31.906: 60:a4:4c:be:e0:c7 New client (policy)
    *ccxL2RoamTask: Jul 01 10:02:31.913: 60:a4:4c:be:e0:c7 Mobile 60:a4:4c:be:e0:c7 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *spamReceiveTask: Jul 01 10:02:31.950: 00:21:55:ac:65:70 Duplicate sequence number in request message
    *spamReceiveTask: Jul 01 10:02:34.113: 00:25:84:10:cd:f0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:34.113: 00:25:84:10:cd:f0 Failed to encode Primary Discovery response to 10.230.0.83:61290
    *spamReceiveTask: Jul 01 10:02:34.113: 00:25:84:10:cd:f0 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:02:34.113: 00:25:84:10:cd:f0 State machine handler: Failed to process msg type = 19 state = 0 from 10.230.0.83:61290
    *spamReceiveTask: Jul 01 10:02:34.113: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.0.83:61290
    *spamReceiveTask: Jul 01 10:02:34.933: 00:25:84:10:cd:f0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:34.933: 00:25:84:10:cd:f0 Failed to encode Discovery response to 10.230.0.83:61291
    *spamReceiveTask: Jul 01 10:02:34.933: 00:25:84:10:cd:f0 Unable to send discovery response to 10.230.0.83:61291
    *spamReceiveTask: Jul 01 10:02:34.933: 00:25:84:10:cd:f0 State machine handler: Failed to process msg type = 1 state = 0 from 10.230.0.83:61291
    *spamReceiveTask: Jul 01 10:02:34.933: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.0.83:61291
    *spamReceiveTask: Jul 01 10:02:36.515: 00:24:c4:2e:66:b0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:36.515: 00:24:c4:2e:66:b0 Failed to encode Discovery response to 10.230.1.92:28389
    *spamReceiveTask: Jul 01 10:02:36.515: 00:24:c4:2e:66:b0 Unable to send discovery response to 10.230.1.92:28389
    *spamReceiveTask: Jul 01 10:02:36.515: 00:24:c4:2e:66:b0 State machine handler: Failed to process msg type = 1 state = 0 from 10.230.1.92:28389
    *spamReceiveTask: Jul 01 10:02:36.515: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.92:28389
    *spamReceiveTask: Jul 01 10:02:36.757: 00:24:c4:2e:50:50 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:36.757: 00:24:c4:2e:50:50 Failed to encode Discovery response to 10.230.1.85:28344
    *spamReceiveTask: Jul 01 10:02:36.757: 00:24:c4:2e:50:50 Unable to send discovery response to 10.230.1.85:28344
    *spamReceiveTask: Jul 01 10:02:36.757: 00:24:c4:2e:50:50 State machine handler: Failed to process msg type = 1 state = 0 from 10.230.1.85:28344
    *spamReceiveTask: Jul 01 10:02:36.757: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.85:28344
    *spamReceiveTask: Jul 01 10:02:37.027: 00:1c:b1:07:d9:90 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:37.027: 00:1c:b1:07:d9:90 Failed to encode Discovery response to 10.230.1.89:51515
    *spamReceiveTask: Jul 01 10:02:37.027: 00:1c:b1:07:d9:90 Unable to send discovery response to 10.230.1.89:51515
    *spamReceiveTask: Jul 01 10:02:37.027: 00:1c:b1:07:d9:90 State machine handler: Failed to process msg type = 1 state = 0 from 10.230.1.89:51515
    *spamReceiveTask: Jul 01 10:02:37.027: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.89:51515
    *spamReceiveTask: Jul 01 10:02:37.231: 00:21:55:ac:2a:e0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:37.231: 00:21:55:ac:2a:e0 Failed to encode Discovery response to 10.230.0.108:29667
    *spamReceiveTask: Jul 01 10:02:37.231: 00:21:55:ac:2a:e0 Unable to send discovery response to 10.230.0.108:29667
    *spamReceiveTask: Jul 01 10:02:37.231: 00:21:55:ac:2a:e0 State machine handler: Failed to process msg type = 1 state = 0 from 10.230.0.108:29667
    *spamReceiveTask: Jul 01 10:02:37.231: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.0.108:29667
    *spamReceiveTask: Jul 01 10:02:37.499: 00:24:c4:2e:52:e0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:37.499: 00:24:c4:2e:52:e0 Failed to encode Discovery response to 10.230.1.76:28350
    *spamReceiveTask: Jul 01 10:02:37.499: 00:24:c4:2e:52:e0 Unable to send discovery response to 10.230.1.76:28350
    *spamReceiveTask: Jul 01 10:02:37.499: 00:24:c4:2e:52:e0 State machine handler: Failed to process msg type = 1 state = 0 from 10.230.1.76:28350
    *spamReceiveTask: Jul 01 10:02:37.499: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.76:28350
    *spamReceiveTask: Jul 01 10:02:38.590: 00:21:55:ac:1e:60 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:38.590: 00:21:55:ac:1e:60 Failed to encode Primary Discovery response to 10.230.0.68:29644
    *spamReceiveTask: Jul 01 10:02:38.590: 00:21:55:ac:1e:60 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:02:38.590: 00:21:55:ac:1e:60 State machine handler: Failed to process msg type = 19 state = 0 from 10.230.0.68:29644
    *spamReceiveTask: Jul 01 10:02:38.590: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.0.68:29644
    *spamReceiveTask: Jul 01 10:02:39.027: 00:25:84:10:c3:80 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:39.027: 00:25:84:10:c3:80 Failed to encode Discovery response to 10.230.1.75:61269
    *spamReceiveTask: Jul 01 10:02:39.027: 00:25:84:10:c3:80 Unable to send discovery response to 10.230.1.75:61269
    *spamReceiveTask: Jul 01 10:02:39.027: 00:25:84:10:c3:80 State machine handler: Failed to process msg type = 1 state = 0 from 10.230.1.75:61269
    *spamReceiveTask: Jul 01 10:02:39.027: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.75:61269
    *spamReceiveTask: Jul 01 10:02:39.118: 00:1f:ca:cc:98:30 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:39.118: 00:1f:ca:cc:98:30 Failed to encode Discovery response to 10.230.0.26:61811
    *spamReceiveTask: Jul 01 10:02:39.118: 00:1f:ca:cc:98:30 Unable to send discovery response to 10.230.0.26:61811
    *spamReceiveTask: Jul 01 10:02:39.118: 00:1f:ca:cc:98:30 State machine handler: Failed to process msg type = 1 state = 0 from 10.230.0.26:61811
    *spamReceiveTask: Jul 01 10:02:39.118: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.0.26:61811
    *spamReceiveTask: Jul 01 10:02:39.419: 00:21:55:ac:1e:60 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:39.419: 00:21:55:ac:1e:60 Failed to encode Discovery response to 10.230.0.68:29643
    *spamReceiveTask: Jul 01 10:02:39.419: 00:21:55:ac:1e:60 Unable to send discovery response to 10.230.0.68:29643
    *spamReceiveTask: Jul 01 10:02:39.419: 00:21:55:ac:1e:60 State machine handler: Failed to process msg type = 1 state = 0 from 10.230.0.68:29643
    *spamReceiveTask: Jul 01 10:02:39.419: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.0.68:29643
    *spamReceiveTask: Jul 01 10:02:39.668: 00:24:c4:2e:20:e0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:39.668: 00:24:c4:2e:20:e0 Failed to encode Primary Discovery response to 10.230.1.160:28249
    *spamReceiveTask: Jul 01 10:02:39.668: 00:24:c4:2e:20:e0 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:02:39.668: 00:24:c4:2e:20:e0 State machine handler: Failed to process msg type = 19 state = 0 from 10.230.1.160:28249
    *spamReceiveTask: Jul 01 10:02:39.668: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.160:28249
    *spamReceiveTask: Jul 01 10:02:40.219: 00:23:33:a2:ed:90 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:40.219: 00:23:33:a2:ed:90 Failed to encode Primary Discovery response to 10.230.1.103:31819
    *spamReceiveTask: Jul 01 10:02:40.219: 00:23:33:a2:ed:90 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:02:40.219: 00:23:33:a2:ed:90 State machine handler: Failed to process msg type = 19 state = 0 from 10.230.1.103:31819
    *spamReceiveTask: Jul 01 10:02:40.219: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.103:31819
    *spamReceiveTask: Jul 01 10:02:40.488: 00:24:c4:2e:20:e0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:40.488: 00:24:c4:2e:20:e0 Failed to encode Discovery response to 10.230.1.160:28250
    *spamReceiveTask: Jul 01 10:02:40.488: 00:24:c4:2e:20:e0 Unable to send discovery response to 10.230.1.160:28250
    *spamReceiveTask: Jul 01 10:02:40.488: 00:24:c4:2e:20:e0 State machine handler: Failed to process msg type = 1 state = 0 from 10.230.1.160:28250
    *spamReceiveTask: Jul 01 10:02:40.488: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.160:28250
    *spamReceiveTask: Jul 01 10:02:41.046: 00:23:33:a2:ed:90 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:41.046: 00:23:33:a2:ed:90 Failed to encode Discovery response to 10.230.1.103:31818
    *spamReceiveTask: Jul 01 10:02:41.046: 00:23:33:a2:ed:90 Unable to send discovery response to 10.230.1.103:31818
    *spamReceiveTask: Jul 01 10:02:41.046: 00:23:33:a2:ed:90 State machine handler: Failed to process msg type = 1 state = 0 from 10.230.1.103:31818
    *spamReceiveTask: Jul 01 10:02:41.046: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.103:31818
    *spamReceiveTask: Jul 01 10:02:41.318: 00:24:c4:1b:2d:b0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:41.318: 00:24:c4:1b:2d:b0 Failed to encode Discovery response to 10.230.1.80:35967
    *spamReceiveTask: Jul 01 10:02:41.318: 00:24:c4:1b:2d:b0 Unable to send discovery response to 10.230.1.80:35967
    *spamReceiveTask: Jul 01 10:02:41.318: 00:24:c4:1b:2d:b0 State machine handler: Failed to process msg type = 1 state = 0 from 10.230.1.80:35967
    *spamReceiveTask: Jul 01 10:02:41.318: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.80:35967
    *spamReceiveTask: Jul 01 10:02:41.735: 00:26:cb:1d:15:10 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:41.735: 00:26:cb:1d:15:10 Failed to encode Discovery response to 10.254.150.119:10159
    *spamReceiveTask: Jul 01 10:02:41.735: 00:26:cb:1d:15:10 Unable to send discovery response to 10.254.150.119:10159
    *spamReceiveTask: Jul 01 10:02:41.735: 00:26:cb:1d:15:10 State machine handler: Failed to process msg type = 1 state = 0 from 10.254.150.119:10159
    *spamReceiveTask: Jul 01 10:02:41.735: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.254.150.119:10159
    *spamReceiveTask: Jul 01 10:02:41.796: 00:21:55:ad:62:80 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:41.796: 00:21:55:ad:62:80 Failed to encode Discovery response to 10.230.1.78:30287
    *spamReceiveTask: Jul 01 10:02:41.796: 00:21:55:ad:62:80 Unable to send discovery response to 10.230.1.78:30287
    *spamReceiveTask: Jul 01 10:02:41.796: 00:21:55:ad:62:80 State machine handler: Failed to process msg type = 1 state = 0 from 10.230.1.78:30287
    *spamReceiveTask: Jul 01 10:02:41.796: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.78:30287
    *spamReceiveTask: Jul 01 10:02:42.432: 00:25:45:b3:12:40 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:42.432: 00:25:45:b3:12:40 Failed to encode Discovery response to 10.230.1.99:20671
    *spamReceiveTask: Jul 01 10:02:42.432: 00:25:45:b3:12:40 Unable to send discovery response to 10.230.1.99:20671
    *spamReceiveTask: Jul 01 10:02:42.432: 00:25:45:b3:12:40 State machine handler: Failed to process msg type = 1 state = 0 from 10.230.1.99:20671
    *spamReceiveTask: Jul 01 10:02:42.432: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.99:20671
    *spamReceiveTask: Jul 01 10:02:42.433: 00:24:c4:2e:50:f0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:42.433: 00:24:c4:2e:50:f0 Failed to encode Discovery response to 10.230.1.97:28345
    *spamReceiveTask: Jul 01 10:02:42.433: 00:24:c4:2e:50:f0 Unable to send discovery response to 10.230.1.97:28345
    *spamReceiveTask: Jul 01 10:02:42.433: 00:24:c4:2e:50:f0 State machine handler: Failed to process msg type = 1 state = 0 from 10.230.1.97:28345
    *spamReceiveTask: Jul 01 10:02:42.433: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.97:28345
    *spamReceiveTask: Jul 01 10:02:42.657: 00:25:45:b3:33:10 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:42.657: 00:25:45:b3:33:10 Failed to encode Discovery response to 10.254.151.11:20735
    *spamReceiveTask: Jul 01 10:02:42.657: 00:25:45:b3:33:10 Unable to send discovery response to 10.254.151.11:20735
    *spamReceiveTask: Jul 01 10:02:42.657: 00:25:45:b3:33:10 State machine handler: Failed to process msg type = 1 state = 0 from 10.254.151.11:20735
    *spamReceiveTask: Jul 01 10:02:42.657: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.254.151.11:20735
    *spamReceiveTask: Jul 01 10:02:42.936: 00:24:c4:2e:6d:20 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:42.936: 00:24:c4:2e:6d:20 Failed to encode Discovery response to 10.230.1.70:28402
    *spamReceiveTask: Jul 01 10:02:42.936: 00:24:c4:2e:6d:20 Unable to send discovery response to 10.230.1.70:28402
    *spamReceiveTask: Jul 01 10:02:42.936: 00:24:c4:2e:6d:20 State machine handler: Failed to process msg type = 1 state = 0 from 10.230.1.70:28402
    *spamReceiveTask: Jul 01 10:02:42.936: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.70:28402
    *spamReceiveTask: Jul 01 10:02:43.412: 00:25:84:10:b7:30 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:43.412: 00:25:84:10:b7:30 Failed to encode Primary Discovery response to 10.230.0.199:61244
    *spamReceiveTask: Jul 01 10:02:43.412: 00:25:84:10:b7:30 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:02:43.412: 00:25:84:10:b7:30 State machine handler: Failed to process msg type = 19 state = 11 from 10.230.0.199:61244
    *spamReceiveTask: Jul 01 10:02:43.412: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.0.199:61244
    *spamReceiveTask: Jul 01 10:02:43.420: 00:24:c4:2e:4d:c0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:43.420: 00:24:c4:2e:4d:c0 Failed to encode Discovery response to 10.230.1.91:28339
    *spamReceiveTask: Jul 01 10:02:43.420: 00:24:c4:2e:4d:c0 Unable to send discovery response to 10.230.1.91:28339
    *spamReceiveTask: Jul 01 10:02:43.420: 00:24:c4:2e:4d:c0 State machine handler: Failed to process msg type = 1 state = 0 from 10.230.1.91:28339
    *spamReceiveTask: Jul 01 10:02:43.420: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.91:28339
    *spamReceiveTask: Jul 01 10:02:43.967: 00:1c:b1:07:d4:d0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:43.967: 00:1c:b1:07:d4:d0 Failed to encode Discovery response to 10.254.151.12:51505
    *spamReceiveTask: Jul 01 10:02:43.967: 00:1c:b1:07:d4:d0 Unable to send discovery response to 10.254.151.12:51505
    *spamReceiveTask: Jul 01 10:02:43.967: 00:1c:b1:07:d4:d0 State machine handler: Failed to process msg type = 1 state = 0 from 10.254.151.12:51505
    *spamReceiveTask: Jul 01 10:02:43.967: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.254.151.12:51505
    *spamReceiveTask: Jul 01 10:02:44.126: 00:25:84:10:b5:20 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:44.126: 00:25:84:10:b5:20 Failed to encode Primary Discovery response to 5.36.61.55:61241
    *spamReceiveTask: Jul 01 10:02:44.126: 00:25:84:10:b5:20 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:02:44.126: 00:25:84:10:b5:20 State machine handler: Failed to process msg type = 19 state = 11 from 5.36.61.55:61241
    *spamReceiveTask: Jul 01 10:02:44.126: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 5.36.61.55:61241
    *spamReceiveTask: Jul 01 10:02:45.522: 00:25:84:49:99:b0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:45.522: 00:25:84:49:99:b0 Failed to encode Primary Discovery response to 10.230.1.59:61497
    *spamReceiveTask: Jul 01 10:02:45.522: 00:25:84:49:99:b0 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:02:45.522: 00:25:84:49:99:b0 State machine handler: Failed to process msg type = 19 state = 0 from 10.230.1.59:61497
    *spamReceiveTask: Jul 01 10:02:45.522: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.59:61497
    *spamReceiveTask: Jul 01 10:02:46.356: 00:25:84:49:99:b0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:46.356: 00:25:84:49:99:b0 Failed to encode Discovery response to 10.230.1.59:61498
    *spamReceiveTask: Jul 01 10:02:46.356: 00:25:84:49:99:b0 Unable to send discovery response to 10.230.1.59:61498
    *spamReceiveTask: Jul 01 10:02:46.356: 00:25:84:49:99:b0 State machine handler: Failed to process msg type = 1 state = 0 from 10.230.1.59:61498
    *spamReceiveTask: Jul 01 10:02:46.356: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.59:61498
    *spamReceiveTask: Jul 01 10:02:46.646: 00:1c:b1:07:ec:80 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:46.646: 00:1c:b1:07:ec:80 Failed to encode Primary Discovery response to 10.230.1.37:51554
    *spamReceiveTask: Jul 01 10:02:46.646: 00:1c:b1:07:ec:80 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:02:46.646: 00:1c:b1:07:ec:80 State machine handler: Failed to process msg type = 19 state = 0 from 10.230.1.37:51554
    *spamReceiveTask: Jul 01 10:02:46.646: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.37:51554
    *spamReceiveTask: Jul 01 10:02:47.468: 00:1c:b1:07:ec:80 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:47.468: 00:1c:b1:07:ec:80 Failed to encode Discovery response to 10.230.1.37:51553
    *spamReceiveTask: Jul 01 10:02:47.468: 00:1c:b1:07:ec:80 Unable to send discovery response to 10.230.1.37:51553
    *spamReceiveTask: Jul 01 10:02:47.468: 00:1c:b1:07:ec:80 State machine handler: Failed to process msg type = 1 state = 0 from 10.230.1.37:51553
    *spamReceiveTask: Jul 01 10:02:47.468: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.37:51553
    *apfReceiveTask: Jul 01 10:02:47.608: 1c:e6:2b:cf:e8:c3 New client (policy)
    *apfReceiveTask: Jul 01 10:02:47.609: 1c:e6:2b:cf:e8:c3 fap IP change from 0 to adc323f for client 1c:e6:2b:cf:e8:c3
    *ccxL2RoamTask: Jul 01 10:02:47.611: 1c:e6:2b:cf:e8:c3 Mobile 1c:e6:2b:cf:e8:c3 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:02:47.612: 1c:e6:2b:cf:e8:c3 Mobile 1c:e6:2b:cf:e8:c3 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *spamReceiveTask: Jul 01 10:02:48.186: 00:25:84:10:b8:10 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:02:48.186: 00:25:84:10:b8:10 Failed to encode Primary Discovery response to 10.230.1.28:61247
    *spamReceiveTask: Jul 01 10:02:48.186: 00:25:84:10:b8:10 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:02:48.186: 00:25:84:10:b8:10 State machine handler: Failed to process msg type = 19 state = 11 from 10.230.1.28:61247
    *spamReceiveTask: Jul 01 10:02:48.186: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.28:61247
    *apfReceiveTask: Jul 01 10:02:48.496: 10:a5:d0:34:a5:73 New client (policy)
    *dtlArpTask: Jul 01 10:02:49.838: 00:04:96:83:6b:6c fap IP change from 0 to adc1c01 for client 00:04:96:83:6b:6c
    *ccxL2RoamTask: Jul 01 10:02:49.841: 00:04:96:83:6b:6c Mobile 00:04:96:83:6b:6c has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *dtlArpTask: Jul 01 10:02:50.829: 00:04:96:83:6b:6c fap IP change from 0 to ae60001 for client 00:04:96:83:6b:6c
    *dtlArpTask: Jul 01 10:02:50.846: 00:04:96:83:6b:6c fap IP change from 0 to adc1c01 for client 00:04:96:83:6b:6c
    *ccxL2RoamTask: Jul 01 10:02:50.854: 00:04:96:83:6b:6c Mobile 00:04:96:83:6b:6c has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:02:50.854: 00:04:96:83:6b:6c Mobile 00:04:96:83:6b:6c has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *dtlArpTask: Jul 01 10:02:51.329: 00:04:96:83:6b:6c fap IP change from 0 to ae60001 for client 00:04:96:83:6b:6c
    *ccxL2RoamTask: Jul 01 10:02:51.338: 00:04:96:83:6b:6c Mobile 00:04:96:83:6b:6c has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *dtlArpTask: Jul 01 10:02:51.338: 00:04:96:83:6b:6c fap IP change from 0 to adc1c01 for client 00:04:96:83:6b:6c
    *ccxL2RoamTask: Jul 01 10:02:51.347: 00:04:96:83:6b:6c Mobile 00:04:96:83:6b:6c has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *dtlArpTask: Jul 01 10:02:51.819: 00:04:96:83:6b:6c fap IP change from 0 to ae60001 for client 00:04:96:83:6b:6c
    *ccxL2RoamTask: Jul 01 10:02:51.828: 00:04:96:83:6b:6c Mobile 00:04:96:83:6b:6c has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *dtlArpTask: Jul 01 10:02:52.338: 00:04:96:83:6b:6c fap IP change from 0 to adc1c01 for client 00:04:96:83:6b:6c
    *ccxL2RoamTask: Jul 01 10:02:52.347: 00:04:96:83:6b:6c Mobile 00:04:96:83:6b:6c has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *dtlArpTask: Jul 01 10:02:52.819: 00:04:96:83:6b:6c fap IP change from 0 to ae60001 for client 00:04:96:83:6b:6c
    *ccxL2RoamTask: Jul 01 10:02:52.827: 00:04:96:83:6b:6c Mobile 00:04:96:83:6b:6c has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *dtlArpTask: Jul 01 10:02:53.338: 00:04:96:83:6b:6c fap IP change from 0 to adc1c01 for client 00:04:96:83:6b:6c
    *ccxL2RoamTask: Jul 01 10:02:53.347: 00:04:96:83:6b:6c Mobile 00:04:96:83:6b:6c has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *dtlArpTask: Jul 01 10:02:54.321: 00:04:96:83:6b:6c fap IP change from 0 to ae60001 for client 00:04:96:83:6b:6c
    *ccxL2RoamTask: Jul 01 10:02:54.327: 00:04:96:83:6b:6c Mobile 00:04:96:83:6b:6c has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *apfMsConnTask_0: Jul 01 10:02:54.356: cc:3a:61:09:da:65 New client (policy)
    *apfMsConnTask_0: Jul 01 10:02:58.914: 14:99:e2:68:70:f2 New client (policy)
    *ccxL2RoamTask: Jul 01 10:02:58.915: 14:99:e2:68:70:f2 Mobile 14:99:e2:68:70:f2 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *apfReceiveTask: Jul 01 10:03:01.896: 10:68:3f:f5:1c:64 New client (policy)
    *spamReceiveTask: Jul 01 10:03:02.922: 00:1c:58:6d:1f:e0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:03:02.922: 00:1c:58:6d:1f:e0 Failed to encode Primary Discovery response to 10.254.151.157:13367
    *spamReceiveTask: Jul 01 10:03:02.922: 00:1c:58:6d:1f:e0 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:03:02.922: 00:1c:58:6d:1f:e0 State machine handler: Failed to process msg type = 19 state = 11 from 10.254.151.157:13367
    *spamReceiveTask: Jul 01 10:03:02.922: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.254.151.157:13367
    *apfReceiveTask: Jul 01 10:03:06.291: 10:a5:d0:0d:5d:0a New client (policy)
    *apfReceiveTask: Jul 01 10:03:06.292: 10:a5:d0:0d:5d:0a fap IP change from 0 to adc301d for client 10:a5:d0:0d:5d:0a
    *apfReceiveTask: Jul 01 10:03:18.277: 88:c6:63:9d:03:09 New client (policy)
    *apfReceiveTask: Jul 01 10:03:18.279: 88:c6:63:9d:03:09 fap IP change from 0 to adc3486 for client 88:c6:63:9d:03:09
    *ccxL2RoamTask: Jul 01 10:03:18.281: 88:c6:63:9d:03:09 Mobile 88:c6:63:9d:03:09 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:18.282: 88:c6:63:9d:03:09 Mobile 88:c6:63:9d:03:09 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *apfMsConnTask_0: Jul 01 10:03:32.961: e8:99:c4:bc:73:44 New client (policy)
    *ccxL2RoamTask: Jul 01 10:03:32.963: e8:99:c4:bc:73:44 Mobile e8:99:c4:bc:73:44 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *apfReceiveTask: Jul 01 10:03:45.542: 78:6c:1c:36:76:2a New client (policy)
    *apfReceiveTask: Jul 01 10:03:45.545: 78:6c:1c:36:76:2a fap IP change from 0 to adc3130 for client 78:6c:1c:36:76:2a
    *ccxL2RoamTask: Jul 01 10:03:45.553: 78:6c:1c:36:76:2a Mobile 78:6c:1c:36:76:2a has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:45.553: 78:6c:1c:36:76:2a Mobile 78:6c:1c:36:76:2a has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *apfMsConnTask_0: Jul 01 10:03:49.587: 00:26:cb:51:df:c8 New client (policy)
    *apfReceiveTask: Jul 01 10:03:49.594: 00:26:cb:51:df:c8 fap IP change from 0 to a0a0a03 for client 00:26:cb:51:df:c8
    *apfReceiveTask: Jul 01 10:03:49.601: 00:04:f2:a5:4c:49 fap IP change from 0 to a0a0a69 for client 00:04:f2:a5:4c:49
    *apfReceiveTask: Jul 01 10:03:49.603: 00:26:55:40:a4:13 fap IP change from 0 to a0a0a6f for client 00:26:55:40:a4:13
    *apfReceiveTask: Jul 01 10:03:49.604: 00:26:55:43:94:4b fap IP change from 0 to a0a0a1c for client 00:26:55:43:94:4b
    *apfReceiveTask: Jul 01 10:03:49.605: 00:26:55:42:69:36 fap IP change from 0 to a0a0a1a for client 00:26:55:42:69:36
    *apfReceiveTask: Jul 01 10:03:49.606: 00:26:55:43:84:13 fap IP change from 0 to a0a0a19 for client 00:26:55:43:84:13
    *apfReceiveTask: Jul 01 10:03:49.608: 00:26:55:43:94:53 fap IP change from 0 to a0a0a24 for client 00:26:55:43:94:53
    *apfReceiveTask: Jul 01 10:03:49.609: 00:23:7d:8c:2d:aa fap IP change from 0 to a0a0ac8 for client 00:23:7d:8c:2d:aa
    *ccxL2RoamTask: Jul 01 10:03:49.613: Neighbor List not ready for LRAD 00:26:0b:10:0d:10, Slot 0 in [l2roamGetNeighborListForSlot].
    *ccxL2RoamTask: Jul 01 10:03:49.615: 00:26:cb:51:df:c8 cannot build Neighbor List packet
    *ccxL2RoamTask: Jul 01 10:03:49.618: Neighbor List not ready for LRAD 00:26:0b:10:0d:10, Slot 0 in [l2roamGetNeighborListForSlot].
    *ccxL2RoamTask: Jul 01 10:03:49.618: 00:26:cb:51:df:c8 cannot build Neighbor List packet
    *ccxL2RoamTask: Jul 01 10:03:49.618: 00:04:f2:a5:4c:49 Mobile 00:04:f2:a5:4c:49 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:49.618: 00:04:f2:a5:4c:49 Mobile 00:04:f2:a5:4c:49 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:49.619: 00:26:55:40:a4:13 Mobile 00:26:55:40:a4:13 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:49.619: 00:26:55:40:a4:13 Mobile 00:26:55:40:a4:13 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:49.619: 00:26:55:43:94:4b Mobile 00:26:55:43:94:4b has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:49.619: 00:26:55:43:94:4b Mobile 00:26:55:43:94:4b has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:49.619: 00:26:55:42:69:36 Mobile 00:26:55:42:69:36 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:49.619: 00:26:55:42:69:36 Mobile 00:26:55:42:69:36 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:49.619: 00:26:55:43:84:13 Mobile 00:26:55:43:84:13 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:49.620: 00:26:55:43:84:13 Mobile 00:26:55:43:84:13 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:49.620: 00:26:55:43:94:53 Mobile 00:26:55:43:94:53 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:49.620: 00:26:55:43:94:53 Mobile 00:26:55:43:94:53 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:49.620: 00:23:7d:8c:2d:aa Mobile 00:23:7d:8c:2d:aa has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:49.620: 00:23:7d:8c:2d:aa Mobile 00:23:7d:8c:2d:aa has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:49.620: 00:04:f2:a5:4c:49 Mobile 00:04:f2:a5:4c:49 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:49.684: 00:26:55:42:69:36 Mobile 00:26:55:42:69:36 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:49.684: 00:23:7d:8c:2d:aa Mobile 00:23:7d:8c:2d:aa has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:49.684: 00:26:55:43:84:13 Mobile 00:26:55:43:84:13 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:49.684: 00:26:55:40:a4:13 Mobile 00:26:55:40:a4:13 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:49.684: 00:26:55:43:94:53 Mobile 00:26:55:43:94:53 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:49.685: 00:26:55:43:94:4b Mobile 00:26:55:43:94:4b has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:50.598: 00:04:f2:a5:4c:49 Mobile 00:04:f2:a5:4c:49 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:50.598: 00:26:55:42:69:36 Mobile 00:26:55:42:69:36 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:50.599: 00:23:7d:8c:2d:aa Mobile 00:23:7d:8c:2d:aa has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:50.599: 00:26:55:43:84:13 Mobile 00:26:55:43:84:13 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:50.599: 00:26:55:40:a4:13 Mobile 00:26:55:40:a4:13 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:50.599: 00:26:55:43:94:53 Mobile 00:26:55:43:94:53 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:50.599: 00:26:55:43:94:4b Mobile 00:26:55:43:94:4b has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *apfMsConnTask_0: Jul 01 10:03:51.287: c8:b5:b7:3f:8f:aa New client (policy)
    *apfReceiveTask: Jul 01 10:03:51.299: 14:99:e2:57:54:7c New client (policy)
    *apfReceiveTask: Jul 01 10:03:51.300: 14:99:e2:57:54:7c fap IP change from 0 to adc3200 for client 14:99:e2:57:54:7c
    *ccxL2RoamTask: Jul 01 10:03:51.307: c8:b5:b7:3f:8f:aa Mobile c8:b5:b7:3f:8f:aa has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:51.307: 14:99:e2:57:54:7c Mobile 14:99:e2:57:54:7c has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:51.307: 14:99:e2:57:54:7c Mobile 14:99:e2:57:54:7c has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:51.595: 00:04:f2:a5:4c:49 Mobile 00:04:f2:a5:4c:49 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:51.612: 00:26:55:42:69:36 Mobile 00:26:55:42:69:36 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:51.624: 00:23:7d:8c:2d:aa Mobile 00:23:7d:8c:2d:aa has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:51.633: 00:26:55:43:84:13 Mobile 00:26:55:43:84:13 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:51.641: 00:26:55:40:a4:13 Mobile 00:26:55:40:a4:13 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:51.651: 00:26:55:43:94:53 Mobile 00:26:55:43:94:53 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:51.663: 00:26:55:43:94:4b Mobile 00:26:55:43:94:4b has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *apfMsConnTask_0: Jul 01 10:03:52.968: cc:3a:61:09:da:65 New client (policy)
    *apfMsConnTask_0: Jul 01 10:03:53.751: 80:96:b1:d1:95:2e New client (policy)
    *ccxL2RoamTask: Jul 01 10:03:53.753: 80:96:b1:d1:95:2e Mobile 80:96:b1:d1:95:2e has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *spamReceiveTask: Jul 01 10:03:53.819: 00:1c:b1:07:d6:40 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:03:53.819: 00:1c:b1:07:d6:40 Failed to encode Primary Discovery response to 10.254.151.170:51508
    *spamReceiveTask: Jul 01 10:03:53.819: 00:1c:b1:07:d6:40 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:03:53.819: 00:1c:b1:07:d6:40 State machine handler: Failed to process msg type = 19 state = 11 from 10.254.151.170:51508
    *spamReceiveTask: Jul 01 10:03:53.819: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.254.151.170:51508
    *apfMsConnTask_0: Jul 01 10:03:53.992: 14:5a:05:df:2f:9e New client (policy)
    *ccxL2RoamTask: Jul 01 10:03:53.999: 14:5a:05:df:2f:9e Mobile 14:5a:05:df:2f:9e has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *apfMsConnTask_0: Jul 01 10:03:54.887: e8:99:c4:bc:73:44 New client (policy)
    *ccxL2RoamTask: Jul 01 10:03:54.888: e8:99:c4:bc:73:44 Mobile e8:99:c4:bc:73:44 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *apfReceiveTask: Jul 01 10:03:55.349: 78:6c:1c:36:76:2a New client (policy)
    *apfReceiveTask: Jul 01 10:03:55.351: 78:6c:1c:36:76:2a fap IP change from 0 to adc3130 for client 78:6c:1c:36:76:2a
    *ccxL2RoamTask: Jul 01 10:03:55.353: 78:6c:1c:36:76:2a Mobile 78:6c:1c:36:76:2a has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:03:55.353: 78:6c:1c:36:76:2a Mobile 78:6c:1c:36:76:2a has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *apfMsConnTask_0: Jul 01 10:03:55.633: 90:72:40:a5:92:32 New client (policy)
    *ccxL2RoamTask: Jul 01 10:03:55.641: 90:72:40:a5:92:32 Mobile 90:72:40:a5:92:32 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *spamReceiveTask: Jul 01 10:03:58.172: 00:25:84:35:61:b0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:03:58.172: 00:25:84:35:61:b0 Failed to encode Primary Discovery response to 10.230.1.123:20829
    *spamReceiveTask: Jul 01 10:03:58.172: 00:25:84:35:61:b0 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:03:58.173: 00:25:84:35:61:b0 State machine handler: Failed to process msg type = 19 state = 0 from 10.230.1.123:20829
    *spamReceiveTask: Jul 01 10:03:58.173: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.123:20829
    *spamReceiveTask: Jul 01 10:03:58.459: 00:25:84:49:a2:80 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:03:58.459: 00:25:84:49:a2:80 Failed to encode Primary Discovery response to 10.230.0.51:61515
    *spamReceiveTask: Jul 01 10:03:58.459: 00:25:84:49:a2:80 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:03:58.459: 00:25:84:49:a2:80 State machine handler: Failed to process msg type = 19 state = 0 from 10.230.0.51:61515
    *spamReceiveTask: Jul 01 10:03:58.459: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.0.51:61515
    *spamReceiveTask: Jul 01 10:04:00.650: 00:1c:b1:07:e0:e0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:04:00.650: 00:1c:b1:07:e0:e0 Failed to encode Primary Discovery response to 10.230.0.175:51530
    *spamReceiveTask: Jul 01 10:04:00.650: 00:1c:b1:07:e0:e0 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:04:00.650: 00:1c:b1:07:e0:e0 State machine handler: Failed to process msg type = 19 state = 11 from 10.230.0.175:51530
    *spamReceiveTask: Jul 01 10:04:00.650: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.0.175:51530
    *spamReceiveTask: Jul 01 10:04:00.908: 00:24:c4:2e:40:80 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:04:00.908: 00:24:c4:2e:40:80 Failed to encode Primary Discovery response to 10.200.36.209:28313
    *spamReceiveTask: Jul 01 10:04:00.908: 00:24:c4:2e:40:80 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:04:00.908: 00:24:c4:2e:40:80 State machine handler: Failed to process msg type = 19 state = 11 from 10.200.36.209:28313
    *spamReceiveTask: Jul 01 10:04:00.908: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.200.36.209:28313
    *spamReceiveTask: Jul 01 10:04:01.071: 00:24:c4:2e:4f:b0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:04:01.071: 00:24:c4:2e:4f:b0 Failed to encode Primary Discovery response to 10.230.1.88:28343
    *spamReceiveTask: Jul 01 10:04:01.071: 00:24:c4:2e:4f:b0 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:04:01.071: 00:24:c4:2e:4f:b0 State machine handler: Failed to process msg type = 19 state = 0 from 10.230.1.88:28343
    *spamReceiveTask: Jul 01 10:04:01.071: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.88:28343
    *spamReceiveTask: Jul 01 10:04:01.287: 00:23:33:c4:82:d0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:04:01.287: 00:23:33:c4:82:d0 Failed to encode Primary Discovery response to 10.230.0.245:22932
    *spamReceiveTask: Jul 01 10:04:01.287: 00:23:33:c4:82:d0 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:04:01.287: 00:23:33:c4:82:d0 State machine handler: Failed to process msg type = 19 state = 11 from 10.230.0.245:22932
    *spamReceiveTask: Jul 01 10:04:01.287: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.0.245:22932
    *spamReceiveTask: Jul 01 10:04:01.891: 00:25:84:10:ca:d0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:04:01.891: 00:25:84:10:ca:d0 Failed to encode Primary Discovery response to 10.254.151.105:61285
    *spamReceiveTask: Jul 01 10:04:01.891: 00:25:84:10:ca:d0 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:04:01.891: 00:25:84:10:ca:d0 State machine handler: Failed to process msg type = 19 state = 11 from 10.254.151.105:61285
    *spamReceiveTask: Jul 01 10:04:01.891: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.254.151.105:61285
    *spamReceiveTask: Jul 01 10:04:01.905: 00:24:c4:2e:4f:b0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:04:01.905: 00:24:c4:2e:4f:b0 Failed to encode Discovery response to 10.230.1.88:28342
    *spamReceiveTask: Jul 01 10:04:01.905: 00:24:c4:2e:4f:b0 Unable to send discovery response to 10.230.1.88:28342
    *spamReceiveTask: Jul 01 10:04:01.905: 00:24:c4:2e:4f:b0 State machine handler: Failed to process msg type = 1 state = 0 from 10.230.1.88:28342
    *spamReceiveTask: Jul 01 10:04:01.905: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.88:28342
    *apfMsConnTask_0: Jul 01 10:04:01.955: cc:3a:61:09:da:65 New client (policy)
    *ccxL2RoamTask: Jul 01 10:04:01.958: Neighbor List not ready for LRAD 00:25:84:10:b5:a0, Slot 0 in [l2roamGetNeighborListForSlot].
    *ccxL2RoamTask: Jul 01 10:04:01.960: cc:3a:61:09:da:65 cannot build Neighbor List packet
    *apfMsConnTask_0: Jul 01 10:04:02.273: cc:3a:61:09:da:65 New client (policy)
    *ccxL2RoamTask: Jul 01 10:04:02.274: Neighbor List not ready for LRAD 00:25:84:10:b5:a0, Slot 0 in [l2roamGetNeighborListForSlot].
    *ccxL2RoamTask: Jul 01 10:04:02.280: cc:3a:61:09:da:65 cannot build Neighbor List packet
    *spamReceiveTask: Jul 01 10:04:02.653: 00:25:84:10:d3:a0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:04:02.653: 00:25:84:10:d3:a0 Failed to encode Primary Discovery response to 10.230.1.113:61300
    *spamReceiveTask: Jul 01 10:04:02.653: 00:25:84:10:d3:a0 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:04:02.653: 00:25:84:10:d3:a0 State machine handler: Failed to process msg type = 19 state = 11 from 10.230.1.113:61300
    *spamReceiveTask: Jul 01 10:04:02.653: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.113:61300
    *spamReceiveTask: Jul 01 10:04:02.659: 00:25:45:b3:22:d0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:04:02.659: 00:25:45:b3:22:d0 Failed to encode Primary Discovery response to 10.230.0.32:20703
    *spamReceiveTask: Jul 01 10:04:02.659: 00:25:45:b3:22:d0 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:04:02.659: 00:25:45:b3:22:d0 State machine handler: Failed to process msg type = 19 state = 11 from 10.230.0.32:20703
    *spamReceiveTask: Jul 01 10:04:02.659: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.0.32:20703
    *spamReceiveTask: Jul 01 10:04:02.729: 00:1f:ca:cc:98:a0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:04:02.729: 00:1f:ca:cc:98:a0 Failed to encode Primary Discovery response to 10.230.0.212:61812
    *spamReceiveTask: Jul 01 10:04:02.729: 00:1f:ca:cc:98:a0 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:04:02.729: 00:1f:ca:cc:98:a0 State machine handler: Failed to process msg type = 19 state = 11 from 10.230.0.212:61812
    *spamReceiveTask: Jul 01 10:04:02.729: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.0.212:61812
    *spamReceiveTask: Jul 01 10:04:03.444: 00:1c:b1:07:d0:30 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:04:03.444: 00:1c:b1:07:d0:30 Failed to encode Primary Discovery response to 10.230.1.182:51496
    *spamReceiveTask: Jul 01 10:04:03.444: 00:1c:b1:07:d0:30 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:04:03.444: 00:1c:b1:07:d0:30 State machine handler: Failed to process msg type = 19 state = 11 from 10.230.1.182:51496
    *spamReceiveTask: Jul 01 10:04:03.444: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.182:51496
    *spamReceiveTask: Jul 01 10:04:03.818: 00:1c:b1:07:e3:80 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:04:03.818: 00:1c:b1:07:e3:80 Failed to encode Primary Discovery response to 10.230.1.24:51535
    *spamReceiveTask: Jul 01 10:04:03.818: 00:1c:b1:07:e3:80 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:04:03.818: 00:1c:b1:07:e3:80 State machine handler: Failed to process msg type = 19 state = 11 from 10.230.1.24:51535
    *spamReceiveTask: Jul 01 10:04:03.818: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.24:51535
    *spamReceiveTask: Jul 01 10:04:03.861: 00:23:33:20:da:b0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:04:03.861: 00:23:33:20:da:b0 Failed to encode Primary Discovery response to 10.230.0.31:1913
    *spamReceiveTask: Jul 01 10:04:03.861: 00:23:33:20:da:b0 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:04:03.861: 00:23:33:20:da:b0 State machine handler: Failed to process msg type = 19 state = 11 from 10.230.0.31:1913
    *spamReceiveTask: Jul 01 10:04:03.861: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.0.31:1913
    *spamReceiveTask: Jul 01 10:04:04.180: 00:25:45:b3:23:30 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:04:04.180: 00:25:45:b3:23:30 Failed to encode Primary Discovery response to 10.230.0.66:20705
    *spamReceiveTask: Jul 01 10:04:04.180: 00:25:45:b3:23:30 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:04:04.181: 00:25:45:b3:23:30 State machine handler: Failed to process msg type = 19 state = 11 from 10.230.0.66:20705
    *spamReceiveTask: Jul 01 10:04:04.181: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.0.66:20705
    *spamReceiveTask: Jul 01 10:04:04.226: 00:25:45:b3:21:00 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:04:04.226: 00:25:45:b3:21:00 Failed to encode Primary Discovery response to 10.230.1.137:20700
    *spamReceiveTask: Jul 01 10:04:04.226: 00:25:45:b3:21:00 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:04:04.226: 00:25:45:b3:21:00 State machine handler: Failed to process msg type = 19 state = 11 from 10.230.1.137:20700
    *spamReceiveTask: Jul 01 10:04:04.226: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.137:20700
    *spamReceiveTask: Jul 01 10:04:04.508: 00:24:c4:1b:2a:20 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:04:04.508: 00:24:c4:1b:2a:20 Failed to encode Primary Discovery response to 10.230.1.22:35961
    *spamReceiveTask: Jul 01 10:04:04.508: 00:24:c4:1b:2a:20 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:04:04.508: 00:24:c4:1b:2a:20 State machine handler: Failed to process msg type = 19 state = 11 from 10.230.1.22:35961
    *spamReceiveTask: Jul 01 10:04:04.508: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.22:35961
    *spamReceiveTask: Jul 01 10:04:04.896: 00:25:84:10:b5:a0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:04:04.896: 00:25:84:10:b5:a0 Failed to encode Primary Discovery response to 10.230.1.86:61242
    *spamReceiveTask: Jul 01 10:04:04.896: 00:25:84:10:b5:a0 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:04:04.896: 00:25:84:10:b5:a0 State machine handler: Failed to process msg type = 19 state = 11 from 10.230.1.86:61242
    *spamReceiveTask: Jul 01 10:04:04.896: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.86:61242
    *spamReceiveTask: Jul 01 10:04:04.907: 00:1c:b1:07:e8:f0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:04:04.907: 00:1c:b1:07:e8:f0 Failed to encode Primary Discovery response to 10.230.1.147:51545
    *spamReceiveTask: Jul 01 10:04:04.907: 00:1c:b1:07:e8:f0 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:04:04.907: 00:1c:b1:07:e8:f0 State machine handler: Failed to process msg type = 19 state = 11 from 10.230.1.147:51545
    *spamReceiveTask: Jul 01 10:04:04.907: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.147:51545
    *spamReceiveTask: Jul 01 10:04:05.676: 00:1c:b1:07:d8:80 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:04:05.676: 00:1c:b1:07:d8:80 Failed to encode Primary Discovery response to 10.230.0.40:51513
    *spamReceiveTask: Jul 01 10:04:05.676: 00:1c:b1:07:d8:80 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:04:05.676: 00:1c:b1:07:d8:80 State machine handler: Failed to process msg type = 19 state = 11 from 10.230.0.40:51513
    *spamReceiveTask: Jul 01 10:04:05.676: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.0.40:51513
    *spamReceiveTask: Jul 01 10:04:05.784: 00:25:45:b3:12:70 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:04:05.785: 00:25:45:b3:12:70 Failed to encode Primary Discovery response to 10.230.1.117:20671
    *spamReceiveTask: Jul 01 10:04:05.785: 00:25:45:b3:12:70 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:04:05.785: 00:25:45:b3:12:70 State machine handler: Failed to process msg type = 19 state = 11 from 10.230.1.117:20671
    *spamReceiveTask: Jul 01 10:04:05.785: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.117:20671
    *spamReceiveTask: Jul 01 10:04:05.787: 00:24:c4:2e:56:a0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:04:05.787: 00:24:c4:2e:56:a0 Failed to encode Primary Discovery response to 10.230.1.125:28356
    *spamReceiveTask: Jul 01 10:04:05.787: 00:24:c4:2e:56:a0 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:04:05.788: 00:24:c4:2e:56:a0 State machine handler: Failed to process msg type = 19 state = 11 from 10.230.1.125:28356
    *spamReceiveTask: Jul 01 10:04:05.788: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.125:28356
    *apfMsConnTask_0: Jul 01 10:04:07.019: e8:99:c4:bc:73:44 New client (policy)
    *ccxL2RoamTask: Jul 01 10:04:07.023: e8:99:c4:bc:73:44 Mobile e8:99:c4:bc:73:44 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *apfMsConnTask_0: Jul 01 10:04:07.430: 10:a5:d0:55:c4:08 New client (policy)
    *ccxL2RoamTask: Jul 01 10:04:07.433: 10:a5:d0:55:c4:08 Mobile 10:a5:d0:55:c4:08 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *apfMsConnTask_0: Jul 01 10:04:09.355: 60:a4:4c:be:e0:c7 New client (policy)
    *ccxL2RoamTask: Jul 01 10:04:09.362: 60:a4:4c:be:e0:c7 Mobile 60:a4:4c:be:e0:c7 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *apfMsConnTask_0: Jul 01 10:04:09.412: 10:a5:d0:0d:5d:0a New client (policy)
    *apfReceiveTask: Jul 01 10:04:10.546: 90:72:40:c3:bf:6e New client (policy)
    *apfReceiveTask: Jul 01 10:04:10.548: 90:72:40:c3:bf:6e fap IP change from 0 to adc3435 for client 90:72:40:c3:bf:6e
    *ccxL2RoamTask: Jul 01 10:04:10.550: 90:72:40:c3:bf:6e Mobile 90:72:40:c3:bf:6e has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:04:10.550: 90:72:40:c3:bf:6e Mobile 90:72:40:c3:bf:6e has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *spamReceiveTask: Jul 01 10:04:12.142: 00:21:55:ac:4f:40 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:04:12.142: 00:21:55:ac:4f:40 Failed to encode Primary Discovery response to 10.230.1.112:29741
    *spamReceiveTask: Jul 01 10:04:12.142: 00:21:55:ac:4f:40 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:04:12.142: 00:21:55:ac:4f:40 State machine handler: Failed to process msg type = 19 state = 0 from 10.230.1.112:29741
    *spamReceiveTask: Jul 01 10:04:12.142: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.112:29741
    *spamReceiveTask: Jul 01 10:04:12.962: 00:21:55:ac:4f:40 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:04:12.962: 00:21:55:ac:4f:40 Failed to encode Discovery response to 10.230.1.112:29740
    *spamReceiveTask: Jul 01 10:04:12.962: 00:21:55:ac:4f:40 Unable to send discovery response to 10.230.1.112:29740
    *spamReceiveTask: Jul 01 10:04:12.962: 00:21:55:ac:4f:40 State machine handler: Failed to process msg type = 1 state = 0 from 10.230.1.112:29740
    *spamReceiveTask: Jul 01 10:04:12.962: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.112:29740
    *apfReceiveTask: Jul 01 10:04:21.551: 78:6c:1c:36:76:2a New client (policy)
    *apfReceiveTask: Jul 01 10:04:21.552: 78:6c:1c:36:76:2a fap IP change from 0 to adc3130 for client 78:6c:1c:36:76:2a
    *ccxL2RoamTask: Jul 01 10:04:21.561: 78:6c:1c:36:76:2a Mobile 78:6c:1c:36:76:2a has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:04:21.562: 78:6c:1c:36:76:2a Mobile 78:6c:1c:36:76:2a has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *spamReceiveTask: Jul 01 10:04:21.951: 00:21:55:ac:2b:20 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:04:21.951: 00:21:55:ac:2b:20 Failed to encode Primary Discovery response to 10.230.0.47:29667
    *spamReceiveTask: Jul 01 10:04:21.951: 00:21:55:ac:2b:20 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:04:21.951: 00:21:55:ac:2b:20 State machine handler: Failed to process msg type = 19 state = 0 from 10.230.0.47:29667
    *spamReceiveTask: Jul 01 10:04:21.951: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.0.47:29667
    *spamReceiveTask: Jul 01 10:04:22.771: 00:21:55:ac:2b:20 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:04:22.771: 00:21:55:ac:2b:20 Failed to encode Discovery response to 10.230.0.47:29668
    *spamReceiveTask: Jul 01 10:04:22.771: 00:21:55:ac:2b:20 Unable to send discovery response to 10.230.0.47:29668
    *spamReceiveTask: Jul 01 10:04:22.771: 00:21:55:ac:2b:20 State machine handler: Failed to process msg type = 1 state = 0 from 10.230.0.47:29668
    *spamReceiveTask: Jul 01 10:04:22.771: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.0.47:29668
    *apfMsConnTask_0: Jul 01 10:04:23.223: c8:b5:b7:3f:8f:aa New client (policy)
    *ccxL2RoamTask: Jul 01 10:04:23.226: c8:b5:b7:3f:8f:aa Mobile c8:b5:b7:3f:8f:aa has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *spamReceiveTask: Jul 01 10:04:27.341: 00:26:0b:10:0d:10 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:04:27.341: 00:26:0b:10:0d:10 Failed to encode Primary Discovery response to 10.254.151.10:48956
    *spamReceiveTask: Jul 01 10:04:27.341: 00:26:0b:10:0d:10 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:04:27.341: 00:26:0b:10:0d:10 State machine handler: Failed to process msg type = 19 state = 11 from 10.254.151.10:48956
    *spamReceiveTask: Jul 01 10:04:27.341: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.254.151.10:48956
    *spamReceiveTask: Jul 01 10:04:27.446: 00:26:0b:10:0d:10 DTLS connection was closed
    *spamReceiveTask: Jul 01 10:04:27.447: 00:26:0b:10:0d:10 Unable to find AP 00:26:0b:10:0d:10
    *ccxL2RoamTask: Jul 01 10:04:28.534: null pRadSlotCB! for LRAD 00:26:0b:10:0d:10, Slot 0 in [l2roamGetRrmNeighborList]
    *ccxL2RoamTask: Jul 01 10:04:28.534: Populating Neighbor List failed for LRAD 00:26:0b:10:0d:10, Slot 0 in [l2roamProcessLradSettleTimeout].
    *dtlArpTask: Jul 01 10:04:31.534: ff:ff:ff:00:11:ae ARP Timeout IP 10.209.1.2 , Time 16:40:48
    *apfReceiveTask: Jul 01 10:04:33.003: 38:0f:4a:60:f5:de New client (policy)
    *apfMsConnTask_0: Jul 01 10:04:34.846: 00:26:cb:51:df:c8 New client (policy)
    *ccxL2RoamTask: Jul 01 10:04:34.853: 00:04:f2:a5:4c:49 Mobile 00:04:f2:a5:4c:49 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:04:34.853: 00:26:55:40:a4:13 Mobile 00:26:55:40:a4:13 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:04:34.853: 00:26:55:43:94:4b Mobile 00:26:55:43:94:4b has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:04:34.854: 00:26:55:42:69:36 Mobile 00:26:55:42:69:36 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:04:34.854: 00:26:55:43:84:13 Mobile 00:26:55:43:84:13 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:04:34.854: 00:26:55:43:94:53 Mobile 00:26:55:43:94:53 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:04:34.906: 00:04:f2:a5:4c:49 Mobile 00:04:f2:a5:4c:49 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:04:34.921: 00:26:55:42:69:36 Mobile 00:26:55:42:69:36 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:04:34.969: 00:26:55:43:84:13 Mobile 00:26:55:43:84:13 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:04:34.992: 00:26:55:40:a4:13 Mobile 00:26:55:40:a4:13 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:04:35.019: 00:26:55:43:94:53 Mobile 00:26:55:43:94:53 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:04:35.072: 00:26:55:43:94:4b Mobile 00:26:55:43:94:4b has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:04:35.856: 00:04:f2:a5:4c:49 Mobile 00:04:f2:a5:4c:49 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:04:35.873: 00:26:55:42:69:36 Mobile 00:26:55:42:69:36 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *apfReceiveTask: Jul 01 10:04:35.934: 38:0f:4a:60:f5:de fap IP change from 0 to adc3250 for client 38:0f:4a:60:f5:de
    *ccxL2RoamTask: Jul 01 10:04:35.936: 38:0f:4a:60:f5:de Mobile 38:0f:4a:60:f5:de has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:04:35.952: 00:26:55:43:84:13 Mobile 00:26:55:43:84:13 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:04:36.002: 00:26:55:40:a4:13 Mobile 00:26:55:40:a4:13 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:04:36.055: 00:26:55:43:94:53 Mobile 00:26:55:43:94:53 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:04:36.080: 00:26:55:43:94:4b Mobile 00:26:55:43:94:4b has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:04:36.855: 00:04:f2:a5:4c:49 Mobile 00:04:f2:a5:4c:49 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:04:36.855: 00:26:55:42:69:36 Mobile 00:26:55:42:69:36 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:04:36.855: 00:26:55:43:84:13 Mobile 00:26:55:43:84:13 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:04:36.856: 00:26:55:40:a4:13 Mobile 00:26:55:40:a4:13 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:04:36.888: 00:26:55:43:94:53 Mobile 00:26:55:43:94:53 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *ccxL2RoamTask: Jul 01 10:04:36.889: 00:26:55:43:94:4b Mobile 00:26:55:43:94:4b has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *apfMsConnTask_0: Jul 01 10:04:41.632: 60:a4:4c:be:e0:c7 New client (policy)
    *ccxL2RoamTask: Jul 01 10:04:41.634: 60:a4:4c:be:e0:c7 Mobile 60:a4:4c:be:e0:c7 has unsupported CCX version 0 in [l2roamProcessClientAssociation]
    *spamReceiveTask: Jul 01 10:04:59.580: 00:21:55:ac:2a:e0 Configured Static IP Address not valid for AP 00:21:55:ac:2a:e0
    *spamReceiveTask: Jul 01 10:04:59.737: 00:24:c4:2e:52:e0 Refusing Join Request from 00:24:c4:2e:52:e0, reached limit for maximum number of APs (48) on interface 1
    *spamReceiveTask: Jul 01 10:04:59.737: 00:24:c4:2e:52:e0 State machine handler: Failed to process msg type = 3 state = 0 from 10.230.1.76:28349
    *spamReceiveTask: Jul 01 10:04:59.737: 00:24:c4:2e:52:e0 Failed to parse CAPWAP packet from 10.230.1.76:28349
    *spamReceiveTask: Jul 01 10:04:59.950: 00:1c:b1:07:d9:90 Refusing Join Request from 00:1c:b1:07:d9:90, reached limit for maximum number of APs (48) on interface 1
    *spamReceiveTask: Jul 01 10:04:59.950: 00:1c:b1:07:d9:90 State machine handler: Failed to process msg type = 3 state = 0 from 10.230.1.89:51516
    *spamReceiveTask: Jul 01 10:04:59.950: 00:1c:b1:07:d9:90 Failed to parse CAPWAP packet from 10.230.1.89:51516
    *spamReceiveTask: Jul 01 10:05:02.441: 00:1c:b1:07:eb:d0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:05:02.441: 00:1c:b1:07:eb:d0 Failed to encode Primary Discovery response to 10.230.1.105:51551
    *spamReceiveTask: Jul 01 10:05:02.441: 00:1c:b1:07:eb:d0 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:05:02.441: 00:1c:b1:07:eb:d0 State machine handler: Failed to process msg type = 19 state = 0 from 10.230.1.105:51551
    *spamReceiveTask: Jul 01 10:05:02.441: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.105:51551
    *spamReceiveTask: Jul 01 10:05:02.883: 00:1c:58:6d:1f:e0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:05:02.883: 00:1c:58:6d:1f:e0 Failed to encode Primary Discovery response to 10.254.151.157:13367
    *spamReceiveTask: Jul 01 10:05:02.883: 00:1c:58:6d:1f:e0 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:05:02.883: 00:1c:58:6d:1f:e0 State machine handler: Failed to process msg type = 19 state = 11 from 10.254.151.157:13367
    *spamReceiveTask: Jul 01 10:05:02.883: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.254.151.157:13367
    *spamReceiveTask: Jul 01 10:05:03.267: 00:1c:b1:07:eb:d0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:05:03.267: 00:1c:b1:07:eb:d0 Failed to encode Discovery response to 10.230.1.105:51552
    *spamReceiveTask: Jul 01 10:05:03.267: 00:1c:b1:07:eb:d0 Unable to send discovery response to 10.230.1.105:51552
    *spamReceiveTask: Jul 01 10:05:03.267: 00:1c:b1:07:eb:d0 State machine handler: Failed to process msg type = 1 state = 0 from 10.230.1.105:51552
    *spamReceiveTask: Jul 01 10:05:03.267: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.105:51552
    *spamReceiveTask: Jul 01 10:05:03.326: 00:23:04:5c:83:00 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:05:03.326: 00:23:04:5c:83:00 Failed to encode Primary Discovery response to 10.230.1.111:29921
    *spamReceiveTask: Jul 01 10:05:03.326: 00:23:04:5c:83:00 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:05:03.326: 00:23:04:5c:83:00 State machine handler: Failed to process msg type = 19 state = 0 from 10.230.1.111:29921
    *spamReceiveTask: Jul 01 10:05:03.326: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.111:29921
    *spamReceiveTask: Jul 01 10:05:04.142: 00:23:04:5c:83:00 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:05:04.142: 00:23:04:5c:83:00 Failed to encode Discovery response to 10.230.1.111:29922
    *spamReceiveTask: Jul 01 10:05:04.142: 00:23:04:5c:83:00 Unable to send discovery response to 10.230.1.111:29922
    *spamReceiveTask: Jul 01 10:05:04.142: 00:23:04:5c:83:00 State machine handler: Failed to process msg type = 1 state = 0 from 10.230.1.111:29922
    *spamReceiveTask: Jul 01 10:05:04.142: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.1.111:29922
    *spamReceiveTask: Jul 01 10:05:10.966: 00:25:45:b3:3b:40 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:05:10.966: 00:25:45:b3:3b:40 Failed to encode Primary Discovery response to 10.230.0.71:20752
    *spamReceiveTask: Jul 01 10:05:10.966: 00:25:45:b3:3b:40 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:05:10.966: 00:25:45:b3:3b:40 State machine handler: Failed to process msg type = 19 state = 0 from 10.230.0.71:20752
    *spamReceiveTask: Jul 01 10:05:10.966: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.0.71:20752
    *spamReceiveTask: Jul 01 10:05:11.799: 00:25:45:b3:3b:40 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:05:11.799: 00:25:45:b3:3b:40 Failed to encode Discovery response to 10.230.0.71:20753
    *spamReceiveTask: Jul 01 10:05:11.799: 00:25:45:b3:3b:40 Unable to send discovery response to 10.230.0.71:20753
    *spamReceiveTask: Jul 01 10:05:11.799: 00:25:45:b3:3b:40 State machine handler: Failed to process msg type = 1 state = 0 from 10.230.0.71:20753
    *spamReceiveTask: Jul 01 10:05:11.799: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.0.71:20753
    *spamReceiveTask: Jul 01 10:05:12.087: 00:1c:b1:07:d3:b0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:05:12.087: 00:1c:b1:07:d3:b0 Failed to encode Primary Discovery response to 10.230.0.49:51502
    *spamReceiveTask: Jul 01 10:05:12.087: 00:1c:b1:07:d3:b0 Failed to send primary discovery response
    *spamReceiveTask: Jul 01 10:05:12.087: 00:1c:b1:07:d3:b0 State machine handler: Failed to process msg type = 19 state = 0 from 10.230.0.49:51502
    *spamReceiveTask: Jul 01 10:05:12.087: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.0.49:51502
    *spamReceiveTask: Jul 01 10:05:13.546: 00:1c:b1:07:d3:b0 Discovery resp: Unable to encode CAPWAP Control IPV4 Address
    *spamReceiveTask: Jul 01 10:05:13.546: 00:1c:b1:07:d3:b0 Failed to encode Discovery response to 10.230.0.49:51503
    *spamReceiveTask: Jul 01 10:05:13.546: 00:1c:b1:07:d3:b0 Unable to send discovery response to 10.230.0.49:51503
    *spamReceiveTask: Jul 01 10:05:13.546: 00:1c:b1:07:d3:b0 State machine handler: Failed to process msg type = 1 state = 0 from 10.230.0.49:51503
    *spamReceiveTask: Jul 01 10:05:13.546: 00:04:96:83:6b:6c Failed to parse CAPWAP packet from 10.230.0.49:51503
    *spamReceiveTask: Jul 01 10:05:13.936: 00:25:84:10:b5:60 Msg Timeout for 10.230.1.54:61242, max retries: 5
    *spamReceiveTask: Jul 01 10:05:16.936: 00:25:84:10:b5:60 Msg Timeout for 10.230.1.54:61242, max retries: 5
    *spamReceiveTask: Jul 01 10:05:18.536: 00:24:c4:2e:56:a0 Msg Timeout for 10.230.1.125:28356, max retries: 5
    *spamReceiveTask: Jul 01 10:05:19.228: 00:25:84:10:b2:a0 Echo Timer Expiry: Missing Echo from AP00:25:84:10:b2:a

    I have gone through your log ,the main problem seems to be the firmware.
    yes there can be other issues ,like DoS or other attack on the network but its rare in your scenario. So you should first upgrade the WLC firmware. AS 7.6 is being the most stable version if you are not using 2100. After upgradation your LAP connect to WLC and they automatically upgraded also via WLC.
    This will resolve the issue but few other things you can try if the above not works ,like you can use winshark to test the ping of death or any unwanted traffic going to the WLC. Or you can check if there is any loop in the network if STP is not properly configured. LAstly check and enable dynamic power and channel assignment from WLC for APs. Make sure you are getting the power required for the devices from the end points.

  • Problem with + in url

    I used to be able to launch a page whose URL having '+' embedded in it under the JRun context root directory, such as test+test.htm.  However, I was unable to do so for JRun4 updaters 5-7  unless I manually typed in or encoded the url by using a Javascript method: encodeURIComponent("test%2Btest.htm") - which converted the URL to 'test%252Btest.htm'.  Is there any JRun setting  I can modify (or other ways) so that I don't need to encode the URL?  Because in some situations, I was unable to encode the URLs if pages were generated by a 3rd party software. for example,
    mytest+report.htm (three html files were generated by a 3rd party software)
    <html>
    <head>
    </head>
    <body>
    <a href="subfolder/mytest+report_sheet1.htm">click tab 1</a>
    <a href="subfolder/mytest+report_sheet2.htm> chick tab 2</a>
    </body>
    </html>

    I think that I can work around this problem by catching all the html files (generated by a 3rd partysoftware) with matching patterns and encoding the URLs.  However, I still hope that there is an easier way to solve this problem.

  • Updating policies and Policy Database or Policy Updates without server restart

    Hi again,
    I have implemented the flash access reference implementation server including setting up all example database tables (so we have a central database server).  I have started updating policies for the application "whitelist" features and have run into some questions below.
    The Protecting Content documentation states:
              "If your license server has access to a database for storing policies, you can retrieve the updated policy from the database and call LicenseRequestMessage.setSelectedPolicy()"
    This leads to two questions:
    1)  The reference implementation doesn't store any Policies in the database (it stores them on the filesystem in the Resources Directory).     I can not find any documentation or examples of how to "retrieve the updated policy from the database".     Can somebody please point me to an example or documentation on how to store policies in the database so I can simply LicenseRequestMessage.setSelectedPolicy()?
    2)  As the reference implementation stores policies on the disk I had to use policy update lists when I whitelisted an AIR app.     However, the reference server did not honor the policy update list till I restarted the flash access reference server.      How can I notify the flash access server of the change to the update policy list without restarting the server?
    Thank you,
    -R

    Hello,
    Please see my answers below.
    Answer 1>
    If you want to store the binary representation of the policy in the database, you can invoke Policy.getBytes() and store the returned byte[] as a blob in the database. For details on how to store such binary data in a database, you should consult the documentation for you database. Then, to rebuild a policy that had been stored in a database, you can obtain the byte[] stored in the database, and invoke new Policy(byte[]) with it to reconstruct that policy instance.
    See the following javadocs:
          * Retrieves an encoded byte array representation of the policy.
          * <p>If this <code>Policy</code> was created from an empty constructor, the revision number
          * will be <code>1</code>.  If this was an existing policy and changes were made to the policy,
           * the revision number will be incremented by one. Otherwise, the revision number will not change.</p>
          * <p>The validity of the policy is first checked before encoding into a byte array.  Encoding will fail
          * if {@link #checkValidity()} throws an exception.</p>
           * @return A serialized representation of the policy.
          * @throws PolicyModificationException The <code>Policy</code> cannot be serialized because it was created with a newer version and was modified.
          * @throws PolicyException The <code>Policy</code> is missing required fields or contains conflicting entries.
          * @throws EncodingException Unable to encode the <code>Policy</code> to a byte array.
          public byte[] getBytes() throws PolicyException, EncodingException;
          * This constructor parses an existing policy from the given byte array.
           * @param policy The policy from which to construct this <code>Policy</code>.
          * @throws EncodingException Unable to parse the byte array into a <code>Policy</code>.
          * @throws PolicyException The <code>Policy</code> is missing required fields or contains conflicting entries.
          public Policy( byte[] policy ) throws PolicyException, EncodingException;
    Answer 2>
    In order to implement automatic configuration updates of policy update lists on the flash access server, you will need to tweak the Reference Implementation code, to monitor the file update state and re-load the PolicyUpdateList if it changes. The code snippet below, taken from the com.adobe.flashaccess.refimpl.util.ParamsReader.buildHandlerConfiguration() method, should serve as an example of how the PolicyUpdateList is loaded and then set on the HandlerConfiguration instance for it to take effect for a particular license acquisition request. In the case of the reference implementation, this code (below) is only invoked once, during server initialization. That is why a server restart is necessary for subsequent changes to take effect. However, nothing prevents this code form being invoked elsewhere, and that implementation is entirely upto the customer, to achieve the desired outcome.
          PolicyUpdateList pul = PolicyUpdateListFactory.loadPolicyUpdateList(pulInputStream);
          if (pul != null)
                X509Certificate issuerCert = null;
                if (hsmEnabled)
                      issuerCert = getHSMCertificate(props, hsmUtils, "RevocationList.verifySignature.X509Certificate");
                else
                      String pulSignatureCertFile = props.getProperty("RevocationList.verifySignature.X509Certificate");
                      if (pulSignatureCertFile != null)
                            InputStream pulSignerInputStream = new FileInputStream(resourcesDir + pulSignatureCertFile);
                            issuerCert = CertificateFactory.loadCert(pulSignerInputStream);
                if (issuerCert != null)
                      pul.verifySignature(issuerCert);
                      context.setPolicyUpdateList(pul);
    Regards,
    Safdar

  • Only 47 APs join to WLC-4402-50

    Why only 47 APs join to the controller 4402-50, the debug capwap errors enable show this:
    (Cisco Controller) >
    *Sep 07 11:52:33.700: 00:3a:98:f0:f0:f0 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 50, joined Aps =47
    *Sep 07 11:52:46.100: 00:3a:98:f0:f0:f0 Join resp: Unable to encode CAPWAP Control IPV4 Address
    *Sep 07 11:52:46.100: 00:3a:98:f0:f0:f0 Failed to encode Join response to 192.168.15.10:10738
    *Sep 07 11:52:46.101: 00:3a:98:f0:f0:f0 Config Response Failure: Unable to send Join response to 192.168.15.10:10738
    *Sep 07 11:52:46.103: 00:3a:98:f0:f0:f0 State machine handler: Failed to process  msg type = 3 state = 0 from 192.168.15.10:10738
    *Sep 07 11:52:46.103: 00:3a:98:f0:f0:f0 Failed to parse CAPWAP packet from 192.168.15.10:10738
    *Sep 07 11:52:46.105: 00:3a:98:f0:f0:f0 Discarding non-ClientHello Handshake OR DTLS encrypted packet from  192.168.15.10:10738)since DTLS session is not established
    Can anybody help me with this? When I disconect another AP the AP join succesfully and when i connect the disconnected AP not join, alway only 47 join, doesn't matter what AP, the first 47 in arrive join to the controller.
    Any idea?

    The limit Stephen is discussing was put into place to eliminate over subscription of a single sfp port utilizing only one AP manager interface. Enabling LAG equally distributes the traffic out one IP address using BOTH sfp ports from the physical layer perspective. You can also achieve this by adding a second AP manager interface and tying it to the second physical port. You must do one of these two to enable support for the additional 2 APs. When creating a new interface for the AP manager2 make sure that you allow it to dynamically manage the APs. If not, you will still have the same problem.

  • Elemental Accelerator

    Is anyone out there successfuly utilizing elemental accelerator 2.1 or 2.2 to edit AVCHD video in PPro CS 4.1?  If so, I would love to hear what your experience with it has been. I am not having any luck so far.The Mainconcept encoder that comes with PPro works perfectly, but no go with the elemental encoder. Why bother? I have been asking myself the same question, but supposedly the elemental encoder should use the GPU to encode much faster.
    System:
    NVIDIA Quadro FX4800 191.00 driver
    Intel Core i7 975 3.33 GHZ
    12 gb Ram
    Vista 64
    Premiere Pro CS4.1
    Elemental Accelerator just upgraded to version 2.2
    Thanks for your input

    Hello,
    A bit of followup for the forum. In spite of truly epic efforts by Lisa and the support team at Elemental Accelerator, the software problems have yet to be resolved at least for my editing needs. It seems that the problem is with the NVIDIA driver. The EA team did put out a workaround that resolved the AME crash problems but at this point, I have found out that:
    1. EA only shows acceleration for H.264 encoding and although my source is H.264 (.MTS), this software is not designed to accelerate encoding to .mpg or avi.
    2. EA is not able to encode key framed opacity changes, ie fade in / fade out of clips or titles using key frame opacity changes
    3. EA seems to be unable to encode any of the stock adobe video transitions (ie cross dissolves, additive dissolves etc) and when it encounters these transitions it defaluts to the stock MainConcepts encoder. Because of this, EA actually encodes a timeline with simple transitions SLOWER than the stock encoder that comes with PPro CS4.1
    At this time, I have uninstalled Elemental Accelerator, but being the eternal optomist...when the new NVIDIA driver revision comes out, I will reinstall the EA and try it again. For the time being, the stock MainConcepts encoder meets all my needs and the rendering time is certainly tolerable. I will put my Elemental Accelerator disc into my "Things I Wish I Hadn't Purchased" museum......shelved neatly between my Ford Edsel owner's manual and folder of Enron stock certificates.
    Until EA and NVIDIA iron out their incompatabilities, my advice is to save your money and invest it in an extra bag or two of good Costa Rican coffee to sip while you wait for the encoding to finish.

Maybe you are looking for

  • Exchange calendar not in calendar list on PRE

    So after 3 weeks of working on getting exchange set-up I finally did it.  Contacts and Email work great but the Calendar shows up in my account list but when I go through my calendar's via the drop down menu at the top right in the calendar view, my

  • Syncing new music into ipod touch

    Imported CD into Itunes. Want to only sync certain songs from list. Everything they told me to do, I tried. I can't sync anything. I do have some songs on Ipod but I don't know how it got there previously unless it downloaded when I first set up Ipod

  • Difference between different Technical systems

    Please tell We can define a technical system as : Web AS ABAP or Web AS JAVA or Standalone JAVA or Third party or Exchange Infrastructure What is Web AS ABAP system? What is Web AS JAVA system? What is standalone JAVA? Thanx in advance Harsh

  • Setting router address

    I access the Internet via an 802.11 Netgear router, which in turn routes packets to ISP-side gateway, and then on to ISP-run NAT. The Netgear router runs a DHCP server, which assigns requestees IPs from a 10.222.139.* block assigned to me by the ISP.

  • JSP onMouseOver

    Hello, I am trying to play around with a web application in java studio creator 2, and want to use the onMouseOver tag, but it doesn't appear to do anything. I am just using the properties window for the static text field, setting various things in t