Unable to EncryptedPassword Field -- Help please urgent
MY weblogic server was working fine till yesterday, but today when i try to restart it says
weblogic.management.configuration.ConfigurationException: [Configuration Management:150029]There was an error reading the MBean wisedevdomain:Name:XXXX Type=EmbeddedLDAP. The value {3DES}4AbRzLERuL8NgdfyE3pu2dRW4gNKmeHn/r2d3Qbf79w= for attribute CredentialEncrypted could not be read successfully
Not only for Embeded Ldap for every encrypte password it says this
Not sure. But this is what I think I read somewhere in the BEA documentation.
In your config.xml replace the encrypted passwords with "" (nothing). When the weblogic server restarts it should encrypt the passwords again. Try this out in a test env first. I will try to look up the documentation and update.
Shikhar
Similar Messages
-
My iphone 5 previously can connect to my Wifi at home, but now my phone can't connect to the Wifi even if it's in range , it appears ( unable to connect ) any help please ??
Try reseting network settings.
-
I turned off the power to my apple tv whilst updating and now it will not work, i have tried to restore using usb but it says unable to find. any help please?
Welcome to the Apple Community.
Are you following these instructions.
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore. -
Hey guys, I forgot the answers to my security questions. Recently iTunes asked me for the answers, since I forgot I'm now unable to purchase anything :( help please
If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support or Apple to get them reset.
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 . Or, if it's available in your country, you could change to 2-step verification : http://support.apple.com/kb/HT5570 -
TS1424 i restored my ipad 3 using itune but it is unable to activate any help please
i succesfully restored my ipad 3 using itune but it is unable to activate any help please
Welcome to the Apple Community.
Are you following these instructions.
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore. -
VO Extension or Substitution Help Please - Urgent (iExpenses)
Hi All,
I am trying to limit the data of the Projects and Tasks LOV (on the ExpenseAllocationsPG) in iExpenses Module. I tried a VO substitution and failed with an error.
ERROR: oracle.jbo.NoDefException: JBO-25002: Definition type View Definition not found
basically it could not find my custom VO that i created, so i deleted it from the database.
This is basically what i want to do:
The standard Projects LOV from the ExpenseAllocationsPG
1.oracle.apps.ap.oie.server.ProjectsLovVO
SELECT * FROM (SELECT P.PROJECT_NUMBER PROJECT_NUMBER, P.PROJECT_NAME PROJECT_NAME, P.PROJECT_ID PROJECT_ID, P.START_DATE START_DATE, P.COMPLETION_DATE COMPLETION_DATE, (select O.NAME from HR_ALL_ORGANIZATION_UNITS O where P.CARRYING_OUT_ORGANIZATION_ID = O.ORGANIZATION_ID)PROJECT_ORGANIZATION_NAME FROM PA_PROJECTS_EXPEND_V P) QRSLT ORDER BY PROJECT_NUMBER
2.oracle.apps.ap.oie.server.ProjectsVO
SELECT * FROM (SELECT P.PROJECT_NUMBER PROJECT_NUMBER, P.PROJECT_NAME PROJECT_NAME, P.PROJECT_ID PROJECT_ID, P.START_DATE START_DATE, P.COMPLETION_DATE COMPLETION_DATE, O.NAME PROJECT_ORGANIZATION_NAME FROM PA_PROJECTS_EXPEND_V P, HR_ORGANIZATION_UNITS O WHERE P.CARRYING_OUT_ORGANIZATION_ID = O.ORGANIZATION_ID) QRSLT ORDER BY UPPER(PROJECT_NUMBER)
I tried to do a substititution on both LOV's
I then created custom Project LOV in a custom folder and i changed the the query a bit as follows to restrict the LOV to user projects:
SELECT P.PROJECT_NUMBER PROJECT_NUMBER,
P.PROJECT_NAME PROJECT_NAME ,
P.PROJECT_ID PROJECT_ID ,
P.START_DATE START_DATE ,
P.COMPLETION_DATE COMPLETION_DATE ,
(SELECT O.NAME
FROM HR_ALL_ORGANIZATION_UNITS O
WHERE P.CARRYING_OUT_ORGANIZATION_ID = O.ORGANIZATION_ID
)PROJECT_ORGANIZATION_NAME
FROM PA_PROJECTS_EXPEND_V P,
PER_ASSIGNMENTS_F per,
HR_ORGANIZATION_UNITS O,
FND_USER fu
WHERE per.person_id = pa_utils.getempidfromuser(fnd_global.user_id)
AND per.primary_flag = 'Y'
AND SYSDATE BETWEEN per.effective_start_date and per.effective_end_date
AND p.project_id IN(select project_id from pa_transaction_controls
where person_id = pa_utils.getempidfromuser(fnd_global.user_id)
UNION ALL
select project_id from pa_transaction_controls
where person_id is null
and expenditure_category = 'Labour'
UNION ALL
select project_id from pa_transaction_controls
where person_id = pa_utils.getempidfromuser(fnd_global.user_id)
and expenditure_category = 'Labour')
AND p.carrying_out_organization_id = o.organization_id
AND fu.employee_id = per.person_id
**all that is in bold is what i added.
my VO substitution does not work. i got errors.....
Can someone please help me.....am i doin the right thing or is there another approach. It would greatly appreciated. I guess if i can get the Projects LOV to work then the Task Lov would be the same.
Thanks
Kresenhi Kresen,
if u r unable to see that extended VO then verify wheter all these steps are done...
after extending that VO in jdeveloper......Please FTP all the 3 (VO.xml, Voimpl and VORowImpl)
into to $JAVA_TOP/<custom directory>/oracle/apps/ap/oie/server/ProjectsLovVO
this thing looks very silly but important......
Please Substitute the Seeded VO to the Extended VO in the Jdeveloper......then check in the .jpx file whether the substituion has taken place
in .jpx file
<Substitutes>
<Substitute OldName ="oracle.apps.ap.oie.server.ProjectsLovVO" NewName ="xxxx.oracle.apps.ap.oie.server.ProjectsLovVO" />
</Substitutes>
this thing should be present....import that jpx file...
Please convert the java files Voimpl and VorowImpl to Class files in the Server using javac command
bounce the apache
regards,
sravanth -
Hi,
I need to read text character by character in a TextArea. Further, if the text is boldm italic etc. I also need to display it that way. I have done this with JTextArea. But, it does not allow me to use the features like bold, italic etc. I also need to have scrolling with the text area. I know that this can be done by JTextPane or JEditorPane. I tried to use JtextPAne, but the text does not get displayed.
I have used setText and getText methods and added textPane to scrollPane but no use.
Can someone please help with this? It is kind of urgent.
Thanks in advance.
sjlYou must use sone default action on JTextPane component assign it to a menu item or toolbar button and after can add some style to text inserted...remember that must add a StyledEditorKit() to your component in such way that can add some default functionality.
public class SimpleEditor extends JFrame {
protected JTextPane textComp;
protected Hashtable actionHash = new Hashtable();
public SimpleEditor() {
super("SimpleEditor");
textComp = createTextComponent();
hashDefaultActions();
makeActionsPretty();
Container content = getContentPane();
content.add(createToolBar(), BorderLayout.NORTH);
scroll = new JScrollPane(textComp);
content.add(scroll , BorderLayout.CENTER);
setSize(320, 240);
protected JTextPane createTextComponent() {
JTextPane ta = new JTextPane();
ta.setEditorKit(new StyledEditorKit());
return ta;
protected void hashDefaultActions() {
Action[] actions = textComp.getActions();
for (int i = 0; i < actions.length; i++) {
String name = (String) actions.getValue(Action.NAME);
actionHash.put(name, actions[i]);
// You can add your custom action
protected void makeActionsPretty() {
Action a;
a = getHashedAction(DefaultEditorKit.cutAction);
a.putValue(Action.SMALL_ICON, //Put your image HERE);
a.putValue(Action.NAME, "Taglia");
a = getHashedAction(DefaultEditorKit.copyAction);
a.putValue(Action.SMALL_ICON, //Put your image HERE);
a.putValue(Action.NAME, "Copia");
a = getHashedAction(DefaultEditorKit.pasteAction);
a.putValue(Action.SMALL_ICON, //Put your image HERE);
a.putValue(Action.NAME, "Incolla");
a = getHashedAction(DefaultEditorKit.selectAllAction);
a.putValue(Action.NAME, "Seleziona tutto");
a = getHashedAction("font-bold");
a.putValue(Action.SMALL_ICON, //Put your image HERE);
a.putValue(Action.NAME, "Bold");
a = getHashedAction("font-italic");
a.putValue(Action.SMALL_ICON, //Put your image HERE);
a.putValue(Action.NAME, "Italic");
a = getHashedAction("font-underline");
a.putValue(Action.SMALL_ICON, //Put your image HERE);
a.putValue(Action.NAME, "Underline");
a = getHashedAction("font-family-SansSerif");
a.putValue(Action.NAME, "SansSerif");
a = getHashedAction("font-family-Monospaced");
a.putValue(Action.NAME, "Monospaced");
a = getHashedAction("font-family-Serif");
a.putValue(Action.NAME, "Serif");
a = getHashedAction("font-size-10");
a.putValue(Action.NAME, "10");
a = getHashedAction("font-size-12");
a.putValue(Action.NAME, "12");
a = getHashedAction("font-size-16");
a.putValue(Action.NAME, "16");
a = getHashedAction("font-size-24");
a.putValue(Action.NAME, "24");
a = getHashedAction("left-justify");
a.putValue(Action.NAME, "Sinistra");
a.putValue(Action.SMALL_ICON, //Put your image HERE);
a = getHashedAction("center-justify");
a.putValue(Action.NAME, "Centrato");
a.putValue(Action.SMALL_ICON, //Put your image HERE);
a = getHashedAction("right-justify");
a.putValue(Action.NAME, "Destra");
a.putValue(Action.SMALL_ICON, //Put your image HERE);
protected JToolBar createToolBar() {
JButton button;
JToolBar bar = new JToolBar();
// Add simple actions for opening & saving
button = bar.add(getOpenAction());
button.setText("");
button.setFocusable(false);
button = bar.add(getSaveAction());
button.setText("");
button.setFocusable(false);
bar.addSeparator();
// Add cut/copy/paste buttons
button = bar.add(getHashedAction(DefaultEditorKit.cutAction));
button.setText("");
button.setFocusable(false);
button = bar.add(getHashedAction(DefaultEditorKit.copyAction));
button.setText("");
button.setFocusable(false);
button = bar.add(getHashedAction(DefaultEditorKit.pasteAction));
button.setText("");
button.setFocusable(false);
bar.addSeparator();
JButton toggle = new JButton(getHashedAction("font-bold"));
toggle.setText("");
toggle.setFocusable(false);
bar.add(toggle);
toggle = new JButton(getHashedAction("font-italic"));
toggle.setText("");
toggle.setFocusable(false);
bar.add(toggle);
toggle = new JButton(getHashedAction("font-underline"));
toggle.setText("");
toggle.setFocusable(false);
bar.add(toggle);
toggle = new JButton(getHashedAction("left-justify"));
toggle.setText("");
toggle.setFocusable(false);
bar.add(toggle);
toggle = new JButton(getHashedAction("center-justify"));
toggle.setText("");
toggle.setFocusable(false);
bar.add(toggle);
toggle = new JButton(getHashedAction("right-justify"));
toggle.setText("");
toggle.setFocusable(false);
bar.add(toggle);
return bar;
public static void main(String[] args) {
SimpleEditor editor = new SimpleEditor();
editor.setVisible(true);
The above code show how to get some default functionality of the JTextPane particularly to StyledEditorKit associated to JTextPane. You can get all default action and after put them as an Action directly to element of JToolBar or JButton...and so you have styled text.
I hope this help you.
regards anti-shock -
File Security on Portal - Help Please urgent
Hello all,
I need an urgent help on File Security on Portal.
suppose we have 5 .PDF files in a perticular directory on the portal server. I want to have J2EE engine check if the user is already logged into portal or not. If the user is not logged in I want to throw logon screen asking them to Login. If the user is logged in I want to show the document directly.
How to configure these things. Please help me.
Thanks and regards,
Vasu Pabbaraju.Hi,
instead of storing Your files into the portal server's filesystem You could store them into KM.
If the file "dummy.pdf" is stored into the KM folder "/documents/test", You could call it via
http(s)://<potal server>:<port>/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/test/dummy.pdf
The portal will ask for a login before displaying the document.
Best Regards
Frank -
"Oracle SSO Failure - Unable to process request" - help please
We are doing a test switchover from our primary site to a DR site and in the DR site, we are not able to access BI Publisher, which we need to do in order to update the data source connection strings so they point to the databases at the DR site instead of the primary site.
When I try to login to BI Publisher (at http://hostname:7777/xmlpserver), I just get the error “Oracle SSO Failure – Unable to process request”. We are running OBIEE 10.1.3.4 with Application Server 10.1.3. I've opened an SR already, but it's been a week with no solution yet. Please let me know if you have any ideas what the problem could be, or if there is any other information I can provide to help with troubleshooting.
Thanks!I just wanted to provide an update on this issue now that it's resolved. I'm not even sure if I understand it exactly, but it turns out that if I access BI Publisher by using the virtual hostname that points to our load balancer instead of using the actual hostname of the app server, then I'm able to get logged into BI Publisher successfully and I don't get the SSO error. I think it has to do with how it was registered with SSO. Thanks a lot Srini and SSVS for your help.
-
Formula Column help please - URGENT
I'm trying to create a formula column as follows:
function NO_REPLIESFormula return Number is
NOREPLY number;
begin
SELECT COUNT(reply) INTO NOREPLY
FROM letters
WHERE reply = 'N'
GROUP BY ltrtype, batch;
RETURN (NOREPLY);
end;
This PL/SQL compiles fine, but when I run the report, I get the following messages:
REP-1401 no_repliesformula FATAL PL/SQL error occured. ORA-01422 exact fetch returns more than requested number of rows.
If I remove the GROUP BY ltrtype, batch, I don't get the error messages, but the result I get is the total no_replies instead of the total no_replies for each ltrtype/batch grouping.
Could someone please help me with this?
Thank you.Hi irish,
I think i am not sure about what you are trying to say, but let me guess, You want the values to be return on the bases of "ltrtype, batch". Which mea that you want more then one values, i mean there can be more then one Groups based on ltrtype and batch. and you want to display these values with repective record???
If i am right, then there is a fault in your code, and that is , you are not specifing in your code that which value is to be diplayed with which record in this report. For that there must be ltrtype, batch colums displayed in the report, you must add those values in your Code in the query, i.e.
function NO_REPLIESFormula return Number is
NOREPLY number;
begin
SELECT COUNT(reply) INTO NOREPLY
FROM letters
WHERE reply = 'N' and ltrtype= :V_ltrtype and batch=:v_batch;
RETURN (NOREPLY);
end;
Where :V_ltrtype and :v_batch are the run time values of each records displayed in the report.
Remember that if you don't sepecify this then your code will return as many records as many distich values of ltrtype, batch. and your variable NOREPLY can hold only one value at a time. I hope you understand both, Solution and the logic behind the error.
Please correct me if i am wrong.
Thanks.
Mohib ur Rehman -
Encore CS6 crash during build. help please URGENT
Hi,
this is my first dvd in encore but I did lots of dvd on dvdstudio.
My project has 1 main menu, 5 submenus. 2 timeline and more than 50 chapter list access by these sub menus. with option of play once, loop etc.
Check dvd only bring back an error that Im ignoring cause it says that one timeline has no end action, and also it is orphan. don't care cause all chapter are select by chapter playlist to reduce the amount of size
anyway I don't think it is something wrong with the authoring, maybe something I missing during the menu creation I did all of them in PS thru adobe dynamic link
The built process crash at 1/3 of the progress. An it takes like 4 hours just for that. The assets are quicktimes none compresed and some .mp4 all together is about 2 hours of video.
PLEASE any suggestion ? I need to send this to my client tomorrow
I can Re make the whole dvd in DVDstudio but as you can guess it took me a lot of time to conect all this assets.
thanks!Stan thanks a lot for all your help
Last night I leave one of my computers enconding all the material to m2v files with encoder dvd presets.
But when I tried to replace this files in my encore project it gives me an error: "Could not import file it is not the same type as the file it is replacing" weird. of course this files are now m2v. this files are working perfect in DVDstudio
I will have to remake the authoring in dvdstudio with this m2v files.
Too bad I was soooooo in love with adobe CS, I switch a few month ago, and premiere surprise me! is by far much better than FCP, audition is great for fast audio post don't need to use OMF and protools anymore, AE is AE the best for motion. encoder quality/speed is so much better than compresor.
hope they fix encore and they make a more versatil speedgrade (one that work with any file codec) -
DVD Crahses Help Please Urgent
Hi, I have a 1 hour 45 min video with several chapter points, when I skip through the chapter points on my mac it works fine. I burnt my project on a Dual DVD and played it in my DVD Player, it crashes at one particular chapter point. I tried 3 more DVD players some play it fine, some crash, does anybody have an idea what this could be? I thought if it was a bad burn it would not play on any DVD players so that cant be it. Please help.
Did you specify a layer break point, or let DVDSP automatically select one? I found that by using auto selection it was less likely to work. Try to insert a marker and specify it as a layer break marker somewhere near the midway mark of your timeline. Also be sure to set it somewhere so that Layer 1 will be larger than Layer 2.
The other thing I noticed is that Toast didn't handle my BUILD folder properly. I think it disregarded the break point I set up and chose its own, which didn't work. If you were using Toast to burn the disc that could be an issue. I used DVDSP's Build & format and it worked out A-OK. -
HELP PLEASE urgent: Creating a package, and class that prints all...
please help, 5 duke dollars up for the best answer, or first answer that solves my problem!
Hello, I have created a package called molecule that contains classes named Water, Sugar, Carbon Dioxide, and SulfuricAcid, and a sub-package named molecule.atom. The atom sub-package contains classes named Carbon, Hydrogen, Oxygen, and Sulfur. Each class in the molecule package should re-define the toString() method to print the numbers and types of atoms that constitute the molecule. For example, molecule.Sugar.toString() should return the string:
"Sugar: 6 Carbon, 12 Hydrogen, 6 Oxygen".
So basically, I have created a folder in C:\molecule\ and a subfolder C:\molecule\atom\ . I have also created a class called ChemTest belonging to the default package. ChemTest.main() creates and prints instances of each molecule and atom, but does not contain any import statements. The problem is that the ChemTest.java file won't compile coming up with 16 errors!
Can someone explain to me what I am doing wrong?
here is one of the molecule classes, for example CarbonDioxide.java:
package molecule;
public class CarbonDioxide
private String co2;
public CarbonDioxide()
co2 = "Carbon Dioxide: 1 Carbon, 2 Oxygen";
public String toString()
return co2;
and here is one of the atom classes, for example Carbon.java:
package molecule.atom;
public class Carbon
private String c;
public Carbon()
c = "Carbon: symbol = C, num = 6, weight = 12.011";
public String toString()
return c;
now here is the ChemTest.java file that won't compile:
public class ChemTest
public static void main(String[]args)
molecule.Water water = new molecule.Water();
molecule.Sugar sugar = new molecule.Sugar();
molecule.CarbonDioxide carbonDioxide = new molecule.CarbonDioxide();
molecule.SulfuricAcid sulfuricAcid = new molecule.SulfuricAcid();
molecule.atom.Carbon carbon = new molecule.atom.Carbon();
molecule.atom.Oxygen oxygen = new molecule.atom.Oxygen();
molecule.atom.Hydrogen hydrogen = new molecule.atom.Hydrogen();
molecule.atom.Sulfur sulfur = new molecule.atom.Sulfur();
System.out.println(water.toString());
System.out.println(sugar.toString());
System.out.println(carbonDioxide.toString());
System.out.println(sulfuricAcid.toString());
System.out.println();
System.out.println(carbon.toString());
System.out.println(oxygen.toString());
System.out.println(hydrogen.toString());
System.out.println(sulfur.toString());
and finally, here are the errors:
C:\molecule\ChemTest.java:5: cannot resolve symbol
symbol : class Water
location: package molecule
molecule.Water water = new molecule.Water();
^
C:\molecule\ChemTest.java:5: cannot resolve symbol
symbol : class Water
location: package molecule
molecule.Water water = new molecule.Water();
^
C:\molecule\ChemTest.java:6: cannot resolve symbol
symbol : class Sugar
location: package molecule
molecule.Sugar sugar = new molecule.Sugar();
^
C:\molecule\ChemTest.java:6: cannot resolve symbol
symbol : class Sugar
location: package molecule
molecule.Sugar sugar = new molecule.Sugar();
^
C:\molecule\ChemTest.java:7: cannot resolve symbol
symbol : class CarbonDioxide
location: package molecule
molecule.CarbonDioxide carbonDioxide = new molecule.CarbonDioxide();
^
C:\molecule\ChemTest.java:7: cannot resolve symbol
symbol : class CarbonDioxide
location: package molecule
molecule.CarbonDioxide carbonDioxide = new molecule.CarbonDioxide();
^
C:\molecule\ChemTest.java:8: cannot resolve symbol
symbol : class SulfuricAcid
location: package molecule
molecule.SulfuricAcid sulfuricAcid = new molecule.SulfuricAcid();
^
C:\molecule\ChemTest.java:8: cannot resolve symbol
symbol : class SulfuricAcid
location: package molecule
molecule.SulfuricAcid sulfuricAcid = new molecule.SulfuricAcid();
^
C:\molecule\ChemTest.java:10: cannot resolve symbol
symbol : class Carbon
location: package atom
molecule.atom.Carbon carbon = new molecule.atom.Carbon();
^
C:\molecule\ChemTest.java:10: cannot resolve symbol
symbol : class Carbon
location: package atom
molecule.atom.Carbon carbon = new molecule.atom.Carbon();
^
C:\molecule\ChemTest.java:11: cannot resolve symbol
symbol : class Oxygen
location: package atom
molecule.atom.Oxygen oxygen = new molecule.atom.Oxygen();
^
C:\molecule\ChemTest.java:11: cannot resolve symbol
symbol : class Oxygen
location: package atom
molecule.atom.Oxygen oxygen = new molecule.atom.Oxygen();
^
C:\molecule\ChemTest.java:12: cannot resolve symbol
symbol : class Hydrogen
location: package atom
molecule.atom.Hydrogen hydrogen = new molecule.atom.Hydrogen();
^
C:\molecule\ChemTest.java:12: cannot resolve symbol
symbol : class Hydrogen
location: package atom
molecule.atom.Hydrogen hydrogen = new molecule.atom.Hydrogen();
^
C:\molecule\ChemTest.java:13: cannot resolve symbol
symbol : class Sulfur
location: package atom
molecule.atom.Sulfur sulfur = new molecule.atom.Sulfur();
^
C:\molecule\ChemTest.java:13: cannot resolve symbol
symbol : class Sulfur
location: package atom
molecule.atom.Sulfur sulfur = new molecule.atom.Sulfur();
^
16 errors
Please help!!!, thanks!HI,
I tried your problem with the following directory structure:c:\java\ChemTest.java
c:\java\molecule\CarbonDioxide.java
c:\java\molecule\atom\Carbon.javaI set the dos-prompt to c:\java and ran the following commands:javac molecule\CarbonDioxide.java
javac molecule\atom\Carbon.java
javac -classpath . ChemTest.java- and it worked!
Sure, in ChemTest.java I deleted all the lines refering to classes that you didn't post...
I hope this helps you!
Anja -
A friend of mine has downloaded 20 tracks from ITunes for me with all the Art work.
The problem I have is that I have imported the 20 Tracks to iTunes, and there is no Art work for the tracks. Even Tho they Show in the folder on my desktop
Is there any reason to why the Art work isn’t showing? I have done this before and the art Dose shows?
Please help ?
Thank YouHave you tried right-clicking on all the tracks, and using *Get Album Artwork* ?
-
Restoring contacts.dat (Help please, urgent)
Hello.
I installed Mail for Exchange, and did a mistake so all my contacts got wiped from the phone.
Its and Nokia N80, and I've got a backup on my computer that I'd like to restore.
The files I've got is:
Contacts.dat
Contacts.xml
sms.dat
sms.xml
and a .db file with a lot of numbers. (IMEI number?)
How can I restore these files? Please help!Thanks for the info - I was able to use Norton Utilities to go to mark those files as not deleted, and got them back!
Maybe you are looking for
-
Custom SharePoint 2013 workflow activities in site template throw error on site creation
Hi all, I have created a number of custom activities for SharePoint 2013 Workflows and I am using them on an Office 365 environment. The custom activities are packaged as a sandbox solution and deployed on my Office 365 site. Everything works as expe
-
I cannot email a photo using iPhoto "share. I keep getting "username/password not recognized". I used to use this function all the time but all of a sudden, I keep getting this message.
-
Cannot connect my mic+headphones to the sound card.any he
I can connect the mic wire to the sound card(creative sound blaster audigy 5.)?but i dont have another exit for my headphones wire, so i can talk but i cant hear anything in the headphones - the sound is coming only from the speakers.is there anyway
-
Hello, I am trying to use this function to call a report from a PL/SQL-DB procedure. First time works but the second or third i get OWS-05101: Execution failed due to Oracle error 3113 ORA-03113: end-of-file on communication channel I am using Oracle
-
Payment method in the Netherlands,
How come adobe only accepts credit card payments in the Netherlands? The smallest webshops accept paypal ideal and what so ever. You guys are way behind on things. We had to buy the illustrator package but because our company does not have a creditca