Unable to enjoy Wi Fi features
Hi,
I have enabled Wifi and I setup Wifi Successfully. But Im not able to connect internet and its saying that "Unable to connect to the internet Please try agian later. If the Problem persist please contact your service provider"
Please help in this regard.
Thanks,
Selvakumar P
Try to re-set it as rudegar suggests. If that doesn't work, try a restore. If that doesn't work, try a restore as new.
If the settings are still grayed out, then your phone has suffered a hardware failure.
Similar Messages
-
When I go to my Juno on the web through Firefox, I am unable to use the tool features such as:
Font size / Color
Bolding
Italics
Bullets
Highlighting
just to name a few. Yet when I bring it up through Internet Explorer these features work, plus the way Firefox reads my Juno the tabs are distorted (the page is not formatted correctly, I contacted Juno they said I should contact my modem company AT& T they said no so you are my last resort.. Please help resolve my issue, THANK YOU in advance for assisting with this matter.It is up to Juno to enable Midas, the Rich Text Editor which is built into Firefox, with one little line of code on every web page that has RTE for IE. There's nothing that you can do to turn that feature on your self, it has to be coded on each web page that has Rich Text Editing.
http://www.mozilla.org/editor/midas-spec.html <br />
http://kb.mozillazine.org/Midas
Their ignorance probably lies with their staff programmers only knowing how to do it for IE ''(their training and certificates are probably from the Microsoft cabal)'', and not realizing that Gecko and WebKit apps each have their own Rich Text Editor's, which require their own small line of code to enable those Editor's. -
I have only an I-Mac (Mac OS c (10.5.8), & enjoy all its features. I also have a Mail account; what do I have to do to continue its operation. I'm also concerned if I will lose all my photos in IPhoto. Am I correct to assume ICloud is only necessary if I had multiple tools of Apple products? Since I only have the I-Mac, do I have to go to ICloud? Louise W.
Your .mac Mail account will continue to operate normally as long as you access the account from the Mac's Mail program. Read this:
What if I just want to keep using my email on all my devices?
As of May 1, you can choose to keep using your mail after MobileMe ends, even on devices that don’t meet the iCloud system requirements. Just go to me.com/move and select the option to keep using your email after MobileMe ends. Once you have completed this short process, your mail will continue to work on devices that don’t meet the iCloud requirements after MobileMe ends on June 30th, 2012.
iCloud is a collection of features that allows you to sync Safari bookmarks, Calendar items, Contacts, and iWork documents (Pages, Numbers) among multiple devices, among other things. Your photos in iPhoto will not be affected.
iCloud is most valuable for people with iOS devices and Macs and requires OS X 10.7 "Lion".
Here is some more information: http://www.apple.com/mobileme/transition.html -
Unable to use Back-up Feature (Photoshop Elements 5.0)
I am running Photoshop Elements 5.0 on Windows 7. The back-up feature no longer functional. My last full back-up was a year ago. When I try to perform an incremental back-up, it hangs (Not Responding) and I have to close the program. With over 34,000 photos, I am concerned about continuing to use the program to manage my photos. I am hesitant to upgrade to 11 with all the problems I am having with 5.0 (no back-up and unable to share photos to Outlook).
Same solution as your other post. Reset your preferences:
<http://www.designerdigitals.com/digital-scrapbooking/tips/questions/172/How+can+I+reset+th e++preferences+in+Photoshop+Elements%3F++>
This should not stop you from buying version 11 because version 11 is still supported up to windows 8. -
End Users unable to use the spotlight feature on Mac Server OS 10.8.2
I have a few users who are trying to use the spotlight feature to search files on the server we have running 10.8.2 however they are unable to do so. Once connected their user folder automatically opens with their specific folders but when you start to enter text into the spotlight in the top of the finder window it only searches "This Mac" We are connecting using afp (Command + K). Any advice would be greatly appreciated.
Welcome to the Apple Support Communities
In the menu bar, press the AirPort icon and open Wi-Fi Diagnostics -
Unable to use the focus feature on a field
hi,
I have the need to manipulate the focus event of a field. This is my pdf body structure :
form1 ----> form
|_ a ----> page
|_b ----> textfield
|_c ----> textfield
The idea is to test if the user pressed the key "ESC", "TAB" or "ENTER" when exiting from field "b". If so, and after testing the content of the field, i wanted to set the focus on that same field "b" to let the user proceed with the correction.
I tried with the "xfa.event.commitKey" to see if the "ESC", "TAB" or "ENTER" keys where pressed while exiting the field. I then redirected the focus to different fields named "ESC", "TAB" and "ENTER" just to be sure that i was getting the correct keys.
This feature works if i set the focus in a different field than the one i'm exiting.
Then, i tried a different approach. On the exit event of the field, i placed the following code :
app.setTimeOut("this.getField('form1[0].a[0].b[0]').setFocus()", 1000);
This would do the same as the setFocus after a while.
For what i could see, catching the events with the "xfa.event.commitKey" for the "ESC", "TAB" or "ENTER" key works alright. The problem is to set the focus to the current field ( the one where the exit event is being analyzed ). However, if i change the destination field to any other field on the form, all the scripts work.
Following the structure that i have on top, it the exit event is being analyzed on field "b" and the "setFocus" or the "app.setTimeOut" scripts indicate field "b" as destination, it doesn't work.
If i change the destination field to be "c", all the scripts work as expected. It seems like there is a problem with setting the focus on the field that i'm exiting from.
Any ideas on this ???
Thanks.Does anyone have a solution to this problem?
I'm urgently trying to find a workaround, but nothing seems to work.
The focus on the current field works in acrobat reader versions above 8.0, but in 8.0 it just doesn''t work...
To reiterate:
On the exit event of a textbox I need to display a validation message if a certain condition is met. I then need to refocus on the same textbox after the "ok" button is clicked in the validation warning.
My setFocus code is correct, but it just doesn't work in 8.0.
Thoughts? -
Unable to see Java 5 features from Doclet API
The Doclet API was extended in Java 5 for getting information in generics, but I have been unable to get it to work. For example, calling ClassDoc.typeParameters and typeParamTags always returns an empty array.
* @param <X> The X
public class Test<X> {
}And the Doclet is:
import com.sun.javadoc.*;
public class TestDoc extends Doclet {
public static boolean start(RootDoc root) {
for (ClassDoc cd : root.classes()) {
System.out.println();
System.out.println(cd);
TypeVariable[] tv = cd.typeParameters();
if (tv.length == 0) {
System.out.println("No type parameters");
} else {
for (TypeVariable t : tv) {
System.out.println("tv: " + t);
ParamTag[] pt = cd.typeParamTags();
if (pt.length == 0) {
System.out.println("No type parameter tags");
} else {
for (ParamTag t : pt) {
System.out.println("pt: " + t);
return true;
}For the Test class, it always prints out:
No type parameters
No type parameter tagsI'm running version 1.5.0_05. Is there some magic flag that needs to get passed? I have been unable to see any evidence that the new Java 5 API does anything at all.Implementing
public static LanguageVersion languageVersion() {
return LanguageVersion.JAVA_1_5;
in my extension doclet solved the problem. Is part of the transition documentation from javadoc 1.2 to javadoc 1.5, but can not easily be found, not even a useful hint link. -
Unable to choose save as feature in pages
Hello,
I have pages for macbook pro and it doesn't give me the save as option to choose from the file menu. Any suggestions?
MacDevenHold down the option key as you select the File menu.
This is now an OSX feature, not Pages.
Peter -
Unable to activate the Workflow feature in sharepoint 2013
Microsoft.Workflow.Client.ActivityNotFoundException: The activity named 'WorkflowXaml_60e6cb77_316a_49ef_8c96_b3ef192dff99' from scope '/SharePoint/default/1e658dce-78af-4b0d-88fb-ab5ec6458409/40a79cb2-9b65-4fcd-a4e6-04004504b70a' was not found. HTTP
headers received from the server - ActivityId: 8d267bcb-bd90-4103-a4e9-94a255fe337c. NodeId: PMOINABOX-APP1. Scope: /SharePoint/default/1e658dce-78af-4b0d-88fb-ab5ec6458409/40a79cb2-9b65-4fcd-a4e6-04004504b70a. Client ActivityId : f7586d9c-231d-b0d7-bebc-709cfc8fdcce.
---> System.Net.WebException: The remote server returned an error: (404) Not Found.
at Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.Workflow.Client.HttpGetResponseAsyncResult`1.End(IAsyncResult result)
at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest request, T content)
--- End of inner exception stack trace ---
at Microsoft.Workflow.Client.ClientHelpers.SendRequest[T](HttpWebRequest request, T content)
at Microsoft.Workflow.Client.WorkflowManagementClient.SendRequest[T](HttpWebRequest request, T content)
at Microsoft.Workflow.Client.WorkflowManager.Publish(WorkflowDescription description, Boolean terminateActiveInstances)
at Microsoft.SharePoint.WorkflowServices.FabricWorkflowManagementClient.PublishWorkflow(String serviceGroupName, WorkflowDescription workflow)
at Microsoft.SharePoint.WorkflowServices.WorkflowProxy.CreateDefinitionSubscription(String subscriptionName, String eventSource, List`1 eventTypes, String definitionName, IDictionary`2 metadata, WorkflowEventContext eventContext)
at Microsoft.SharePoint.WorkflowServices.FabricSubscriptionService.<>c__DisplayClass1.<CreateDefinitionSubscription>b__0()
at Microsoft.SharePoint.WorkflowServices.WorkflowServiceContextExtensions.InvokeWithEcosystemRetry(WorkflowServicesContext context, EcosystemRequiredMethod method)
at Microsoft.SharePoint.WorkflowServices.FabricSubscriptionService.CreateDefinitionSubscription(String subscriptionName, Guid eventSourceId, String eventSource, List`1 eventNames, String definitionName, IDictionary`2 metadata, WorkflowEventContext
eventContext)
at Microsoft.SharePoint.WorkflowServices.WorkflowSubscriptionStorageEventReceiver.ItemAdded(SPItemEventProperties properties)Hi Ayyappa18,
Whether this Worflow feature was created by yourself, then you activated it after you deployed it in your SharePoint 2013.
Please activate this feature using the following PowerShell cmdlet:
Enable-SPFeature –identity f7586d9c-231d-b0d7-bebc-709cfc8fdcce -URL <your site URL>
More information about the above cmdlet, please refer to the link below:
http://technet.microsoft.com/en-us/library/ff607803.aspx
I hope this helps.
Thanks
Wendy
Wendy Li
TechNet Community Support -
Unable to Install Desktop Experience Feature
Hello,
I'm configuring a 2012 R2 server as an RD Session Host. Whenever I try to install the Desktop Experience feature, I get the below error. This happens both from the GUI and from PowerShell. The feature is listed with an Install State of
"Available" in PowerShell. I've tried specifying an alternate source path by pointing to the WinSXS folder on another 2012 R2 server with the same feature installed, but I still get the same error. Rebooting has not helped. On the
problem server, I'm able to install other features without issue.
Has anyone else ever ran into this issue before?
Thanks.
Install-WindowsFeature : The request to add or remove features on the specified server failed.
Installation of one or more roles, role services, or features failed.
The system cannot find the path specified. Error: 0x80070003
At line:1 char:1
+ Install-WindowsFeature -name desktop-experience
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (@{Vhd=; Credent...Name=localhost}:PSObject) [Install-WindowsFeature],
Exception
+ FullyQualifiedErrorId : DISMAPI_Error__Failed_To_Enable_Updates,Microsoft.Windows.ServerManager.Commands.AddWind
owsFeatureCommandHi MDDDD,
Please also check the event log and find the relevant error or failure information.
In addition, we can specify the source file to a side-by-side store (referred to as SxS) in installation media or to a WIM file in the "-Source" parameter of the cmdlet "Install-WindowsFeature":
installation media path:
D:\Sources\SxS\
To specify a WIM file, add a WIM: prefix, and add the index of the image to use in the WIM file as a suffix, as shown in the following example.
WIM:\\server_name\share\install.wim:4
You can find the Index of the image file by typing:
dism.exe /get-imageinfo /imagefile:\\server_name\share\install.wim
For more detailed information to install feature, please go through this article:
Install or Uninstall Roles, Role Services, or Features
If there is anything regarding this issue, please feel free to post back.
Best Regards,
Anna Wang -
I am unable to use the browse feature within the store on an iPad 1
The browse by author feature within the iBooks store will not show titles by author. When I touch an author's name the app does not pull up books it remains with the "Choose an Author" prompt.
We have the same problem and just use the search bar instead. We don't have the same problem on our new iPad 3. We did uninstall and reinstalled the new iBooks but still the same problem. Have you had any fixes?
-
Most recent version of Java and firefox. Java Applications will start to load but end up in an infinite loading loop.
Well, it's what I did to get my Java working in Firefox 4. I installed both binaries into my Library/Internet Plug-ins folder. The version was newer that what was previously installed (newer version is 0.9.7.5). It solved the Java problems I was having. My inital problem was that Java would not initiate and no applets would run in Firefox version 4 which I just installed a few days ago.
I know the readme.txt. says it is not compatible with version 4, but the release date on 0.9.7.5 is after the release date of Firefox 4 and so that was I tried it. I figure there was nothing to lose as at worst it woud update my two plug-in files. Nothing was going to be changed otherwise. If you try it, it might work. -
Unable to use 10g New feature -- COLLECT
Hi all,
Im trying to make use of the COLLECT function for string aggregation(Though I could stragg I would like to try this out) in my sql.
Im doing the following:
Select col1, collect(col2) as col2
from tab1
group by col1;
But it returns me with
+select col1,collect(col2)
ERROR at line 1:
ORA-00932: inconsistent datatypes: expected NUMBER got -+
What could be the reason and how could I make use of COLLECT?
Database : 10g Release:10.2.0.4
Thanks in Advance,
Ila.Hi Odie,
After the TYPE is created(With name prefix "SYS"), system assigns the values to the collection type and aggregates it to give the result as mentioned in the link above (No need to create a type explicitly).
When I'm trying to execute a query involving COLLECT, its results in error which I had mentioned above.
Im bit unclear if Im missing something.
Thanks in advance..
Ila -
I have a Canon MX870 and I'm unable to use iMac fax feature (OS X.6)
I bought the MX870 because OS X.6 no longer supports my Apple modem (32 bit only). I'm surprise that I can't PDF fax documents now. Any work-arounds or soultions you have will help, I'm sure. Thanks!
None of my Canon multipurpose machines has been able to fax on a Mac. Go to the Canon home page and check that it's compatible with Macs, my Pixma's fax function is not compatible.
Miriam -
Asus laptop running windows 7. Has recently come up with message "yahoo recommends you upgrade your browser to enjoy all the features in the new yahoo mail" Clicking on the upgrade box does nothing. Clicking on the "continue without upgrading" box does nothing so i am now unable to access emails on my laptop.
I wonder what version of Firefox Yahoo thinks you have?? There are some add-ons which can modify or block browser information. To see whether that might be relevant, could you test in Firefox's Safe Mode? That's a standard diagnostic tool to bypass interference by extensions (and some custom settings). More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using
Help > Restart with Add-ons Disabled
In the dialog, click "Start in Safe Mode" (''not'' Reset)
Any difference?
Also, Yahoo's changes have obsoleted many old bookmarks. If you are accessing Yahoo! mail using a bookmark, try letting Yahoo redirect you to its currently preferred server from a generic address like this one
https://mail.yahoo.com/
or from the Yahoo home page.
Maybe you are looking for
-
Photoshop.exe 64bit error 0xc000007b on photoshop startup
I just got a new computer and installed a 15$ trial cd of master suite collection. The 32 bit version of photoshop works fine but when i click on a .psd file that is already created i get this error photoshop.exe 64bit error 0xc000007b the applicatio
-
i need to get back individually erased photos and videos from my iMac with no backups to help. this is an attempt to consolidate all my data, new and old so I can uninstall Maverick and put Mountain Lion back on my iMac. Any help would be greatly ap
-
Please help... I can't get in my phone and this is sooo frustratingt
-
Unexpected behaviour with "require password" and screen saver
In 10.6.x, I checked "Require password after sleep or screen saver begins" and after the invoking the screen saver (via a hot corner) moving the mouse or typing on the keyboard brought up a password dialog. In Lion, this is what happens with the same
-
I'm using schema validation to validate XML instances. In case of error (constraint violation), I need to provide information back to the user about the problem such as : - value provided by the user, - constraint violated, - list of the facets of th