Unable to enter company code in Customer ERP UI

Hello Experts,
I am trying to create a customer CR using ERP UI and  I am unable to enter the company code in the UI screen . The company code theme in the UI is greyed out and there is no fields to fill out . Is there any settings I need to make in UI to make the company code theme appear with the fields.

Hi Aravind,
there are a few issues with the ABAP Web Dynpro Rendering that occur in basis release 7.40 (meaning in EhP7). Check (and most probably apply) SAP notes 2014019 and 2022343.
Best regards
Michael

Similar Messages

  • Error in testing an idoc -Trans. XK01 : CoCde not entered; company code are

    Hi
    I am getting the following error when i am trying to test a idoc thru we 19.
    The message type is CREMAS and it is an inbound idoc ,I am testing the function module
    idoc_input_creditor .
    Trans. XK01 : CoCde not entered; company code area not being edited
    I have entered   the company code in E1LFBWM segment  but still getting the same error .
    Can some one advise how this error can be solved
    Thanks in advance
    Anjali

    Hi ,
    Have you entered Company code value in all the required segments ? Like E1LFB1M , E2LFB5M..
    Regards,
    Deepthi

  • How to map company code for customer master in CRM

    Dear CRM Experts,
    The scenario is ,Customer Master is created in SAP CRM 6.0 and it flows to ECC 6.0 . After replicating the data to ecc i am manually assinging company code to customer master.Is there any option to map company code to crm customer master level.
    Regards
    Ashwin

    Dear All,
    The above requirement was address by Development.

  • Create Shopping cart - Enter company code error

    Hi All,
    While creating shopping cart from portal, system is throwing error as "Enter Company Code". When checked under basic data tab, there is no values for company code field. How to bring these values into SRM from ECC ?
    Regds,
    CB

    Hi,
    Please find the details...
    i have taken this from System >> Status >> Component Information >>
    SAP_ABA     701     0003     SAPKA70103     Cross-Application Component
    SAP_BASIS     701     0003     SAPKB70103     SAP Basis Component
    PI_BASIS     701     0003     SAPK-70103INPIBASIS     Basis Plug-In
    ST-PI     2008_1_700     0000          -     SAP Solution Tools Plug-In
    SAP_BS_FND     701     0002     SAPK-70102INSAPBSFND     SAP Business Suite Foundation
    SAP_BW     701     0003     SAPKW70103     SAP Business Warehouse
    SAP_AP     700     0015     SAPKNA7015     SAP Application Platform
    SRM_PLUS     700     0002     SAPKIBK202     SRM_PLUS for mySAP SRM
    SRM_SERVER     700     0002     SAPKIBKV02     SRM_SERVER
    SRM_EXPL     700     0002     SAPK-70002INSRMEXPL     SRM Extended Functionality for SRM_PLUS including PPS
    SRM_EXT     700     0002     SAPK-70002INSRMEXT     SRM Extended Functionality for SRM_SERVER including PPS
    Regds,
    CB

  • Unable to assign Company code to BP :

    Hi Friends,
    I am creating a Business partner in CRM Server. Through BDOC, it is getting transfered in R/3 through T-code SMW01.
    I am getting BP replicated successfully in R/3 Server in XD03 T-code.
    Problem is when i am assingning BP a Company code it is giving error as "Customer xyz has not  been assigned for
    Company code abc".
    I have used Business Trancation event. Event name "DE_BALE". I have maintained entries in TBE24 and TBE34 table,
    Also i have copied FM "SAMPLE_INTERFACE_DE_BALE" to Z FM and assigned to this event.
    I am getting the same error. In R/3, my Z FM is not gettig called.
    Can anybody Suggest << removed >>
    Thanks,
    Chitrakant
    Edited by: Rob Burbank on Nov 13, 2009 1:47 PM

    Hi  Chitrakant Desh... ,
    for shich role of the BP did you try? (Assignments are role-specific).
    Regards,
    Clemens

  • How to determine which company code a customer is assigned

    hi
    anybody knows how a customer is connected to a company code
    i know its connected to several company codes but i want to know the original company code

    Hi
    Anjali's question sounds valid. As per my understanding we cannot Create a customer many times. The customer will be created only once (say Customer 1000) and the same existing customer will be extended to other company codes and for other sales areas based on the requirement. The company code and the sales area details in which the customer was initially created should be traceable.
    But I donot understand the reason for looking for these details.It will give more clarity on the requirement if the reason behind this requirement is also posted by Anjali.
    Thanks,
    Ravi

  • Unable to find company code in assignment of company code (OX19)

    Hi,
    Please advice me why I am unable to find the newly created company code in assignment of company code (OX19).
    TQ

    Hello
    Comapnay code can be assigned to one controlling area only, so this might be assigned to some other CO Area, check the table TKA02, you can see that.
    Before you can delete the assignment, you must delete all master data in controlling area ALMA referring to company code you want assigned.
    Regards
    Dinabandhu

  • HT4061 UNABLE TO ENTER PASS CODE

    Hi,
    I am unable to enter the pass code as the number box's have highlights around them, like there is some type of accessability been turned on?

    IPhone, iPad, iPod touch: Wrong passcode results in red disabled screen

  • Unable to create company code setup in Minisap 4.6D

    Hi,
    I have installed MiniSAP 4.6D on Windows XP successfully that i have got user ID screen and logon and inter SAP Easy Access but i have found only three menu path options.Note the following name's and suggest where can i set all menu access listing
    <b>SAP Menu
    ================
       Office
       Information Systems
       Tools</b>
    But how can view another menu path like ACCOUNTING & LOGISTIC menu's.
    Also confirm how can create a company code ? through menu path.
    Best regards,
    Muhammad Ahmed

    Dear Maurice,
    Thank you for exact reply but one thing more clear to me where i can download demo R/3 or any ECC versions.
    I have urgently required for FICO paractice for certification papers.
    Pls help me asap.
    Best regards,
    Muhammad Ahmed

  • Add Company Code to customized extractor (User delegation task)

    Hello guys,
    Currently we have one report "Delegation" of Authority" that list all the delegations of authorizations among users for a certain period of time. These delegations of authorizations are related to the approval tasks using workflows.
    The report is done one the top of one Z* infoObject and data is brought from ECC by a Z* extractor.
    This extractor is database view that uses join conditions between 3 tables. The used tables are: SWWUSERWI (Current Work Items Assigned to a User), SWWWIHEAD (Workflow Runtime: Header Table for All Work Item Types) and HRUS_D2 (User Substituted by User).
    Due to a new requirement, it is necessary to add to the report the company code of the users (the one who delegates and the one who receives).
    The dificulty I'm facing is to find a table that has the company code and that I can link (join) with one of the previous tables.
    I have tried with table PA0001 (HR Master Record: Infotype 0001 (Org. Assignment)) where I have the company code of each person, but I cannot link this table to any of the other 3. I have checked also table DFKKWLI (Work Items) but it is not being maintained...
    Does anyone has tips that might help me?
    I would really appreciate!
    Thanks,
    Andreia

    Hi Rani,
    I need more information:
    1. Have u copied entire module pool "SAPMKPT2" which is main programe for KP90.
    2. You want to set the controlling area? for that u have to call "SAPLSPO4" program and Screen Number "0300".
    I think you mostly want to set the controlling area first and the "Delete Planned Costs"...please answer.
    Hope this may clear your idea too..
    Thanks,
    Chetan Shah

  • IPod on voice command unable to enter pass code

    Some how I have activated voice command on my iPod and when I try to enter the pass code the cell remain blank and the iPod remains locked

    I think you mean VoiceOver
    Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver off. You may have to use three fingers to scroll the screen to get there. If problems see the following for how to turn off via iTunes:
    iPhone: Configuring accessibility features (including VoiceOver and Zoom)

  • Customer-based BP role, Company Code level data

    System ECC 5.0.
    May be somebody can help me in a problem with Company code level data for BP.
    I'm trying to create new BP in custom Z role (created by me), on company code data screen I cannot set "Company Code Is Valid for Customer" indicator on company code selection dialog box.
    I use custom Z role with assigned custom Z rolecategory (with active BP-customer syncronizaton), It seems that there is a missing setting in SPRO for rolecategory that activate possibility to enter company code data.....

    After some investigation.... the problem was not in customising, but in some requirements from code: BP role should have the same name as s BP rolecategory. After renaming it goes.

  • Customer without company code

    Hi,
    is there a possibility to change a customer without a company code ? ( in an automated way ). Our current batch input program does not pass the first screen ( message "enter company code" ).....................
    thanks,
    Rolf

    hi Rolf,
    I guess you have to untick the checkboxes for company code data (Payment, Correspondence, whatever...) on the first screen of the maintenance transaction (either FD02 or XD02). Just run the BI session in mode A and you will see!
    hope this helps
    ec

  • Create Customer at POS and upload to different company code

    Hi Experts
    Client Requirement is like this
    Two company codes are here e.g. company code BP01 and BP02
    BP01 has one store
    BP02  has three store
    Now Customer is create at POS Server at any store .
    here we can create customer with respect to any one company code
    Same customer want to  buy goods from both company code and can get rewards points
    question
    so cutomer has to extend in other company code and has to update to each POS SERVER which located in each store 
    how to handle this scenarion
    regards

    Hi Hanumant,
    Assuming if customer, buys some item from CCode BP02 regularly, then you can create the customer on the POS application (like SAP POS..), and append the POS Customer master (re-use any text field) with information of other company code where the customer wishes to deal with).
    The customer master will be passed using inbound idoc, on to the IS Retail Server in the HO.
    Now at HO level a the customer can be extended for multiple company code ..in this case BP01 manually or by an automated program, which will monitor the specific field (coming from the new customer master idoc from POS) , if it detects contents, it reads the same and extend the customer as per mentioned ccode.
    So next time onwards , using outbound doc , customer master can be updated to all locations for that customer. Similarly the loyality point, can be accumulated based on the purchases made per Ccode.
    Regards,
    Anirban Roy

  • Customer and Company Codes

    Hi,
        I have a requirement where i need to have Customers along with the company code the customer belongs to. As far as 0customer and 0customer_Sales are concerned i cannot see any attributes of compnay codes in these infoobjects.
    Any suggestion how i can get customer along with the company code with any standard infoobject or otherwise??
    Best Regards,
    RK

    Hi,
       when i try to compound the standard infoobject is throwing an error,
    InfoObject 0CUSTOMER is referenced from 0BILLTOPRTY, compounding cannot be changed
    InfoObject 0CUSTOMER is referenced from 0COMPETITOR, compounding cannot be changed
    InfoObject 0CUSTOMER is referenced from 0DEBITOR, compounding cannot be changed
    InfoObject 0CUSTOMER is referenced from 0INT_CUST, compounding cannot be changed
    InfoObject 0CUSTOMER is referenced from 0PAYER, compounding cannot be changed
    InfoObject 0CUSTOMER is referenced from 0RT_CUSTPL, compounding cannot be changed
    InfoObject 0CUSTOMER is referenced from 0SHIP_TO, compounding cannot be changed
    InfoObject 0CUSTOMER is referenced from 0SOLD_TO, compounding cannot be changed
    Characteristic 0CUSTOMER is used as Attribute of 0APO_LOCNO, but characteristic 0COMP_CODE is not
    Characteristic 0CUSTOMER is used as Attribute of 0APO_RESNAM, but characteristic 0COMP_CODE is not
    Characteristic 0CUSTOMER is used as Attribute of 0BPARTNER, but characteristic 0COMP_CODE is not
    Characteristic 0CUSTOMER is used as Attribute of 0BP_GRP, but characteristic 0COMP_CODE is not
    Characteristic 0CUSTOMER is used as Attribute of 0FUND, but characteristic 0COMP_CODE is not
    Characteristic 0CUSTOMER is used as Attribute of 0GM_SPNSR, but characteristic 0COMP_CODE is not
    Characteristic 0CUSTOMER is used as Attribute of 0INSP_LOT, but characteristic 0COMP_CODE is not
    Characteristic 0CUSTOMER is used as Attribute of 0NOTIFICATN, but characteristic 0COMP_CODE is not
    Characteristic 0CUSTOMER is used as Navigation Attribute of 0BP_ACTIVIT, but characteristic 0COMP_CODE is not
    Characteristic 0CUSTOMER is used as Navigation Attribute of 0CRM_SOLDTO, but characteristic 0COMP_CODE is not
    Characteristic 0CUSTOMER is used in Communication Structure 0APO_LOCNO_ATTR, but characteristic 0COMP_CODE is not
    Characteristic 0CUSTOMER is used in Communication Structure 0CUSTOMER_ATTR, but characteristic 0COMP_CODE is not
    Characteristic 0CUSTOMER is used in Communication Structure 0CUSTOMER_TEXT, but characteristic 0COMP_CODE is not
    InfoObject 0CUSTOMER (or ref.) is used in data targets with data -> Error:
    Characteristic 0CUSTOMER: Compound or reference was changed
    InfoObject 0CUSTOMER being used in InfoCube ZZPCA_C01 (contains data)
    Pls suggest.
    Regards,
    RK

Maybe you are looking for