Unable to enter Google WSDL

Hi,
In <b>Web Services Navigator</b> (of my local sandbox server) I want to enter <b>WSDL URL of the Google WSDL</b> (which I downloaded in my local system).
On trying to give WSDL URL of the Google Web service the message which is coming "Cannot download WSDL from : For security reasons only http and https protocols are supported ".
Please suggest how to do it ?
regards,
Anmol

Hi Anmol,
Are you trying to give a url or a wsdl file stored locally in the system.
If it is a url then u must be sure if the ports 8080 or 443 are open to gain access to the url from the server. Try opening the url from a browser and see if it is opening properly.
Webservices Navigator may not accept a locally stored file as a url.
Regards,
Sujana

Similar Messages

I am unable to enter data in a Google sheet via iPad.

I am unable to enter data in a Google sheet on my iPad.
The admin on the sheet says it's open to anyone with the link.
I can enter from my iMac but not from my iPad (current ios.)
What am I doing wrong?

It had occurred to me that the old shutdown/restart routine can cure a multitude of problems. That's what I did and it took care of all of the problems in all my Numbers documents.

Unable to enter a Division for which I have proper credentials, via the GUI

I have a Division which I am unable to enter, either as a student or as the full site Administrator, from the GUI.
When I log into the main Site page, I see the link for the Division (as I should - I have DOWNLOAD permissions for the Division). However when I click the link (the thumbnail image) I am always, 100% of the time, rejected and sent to the login page. Ignoring that, I still have all of my proper credentials and may continue to freely access other parts of the site.
In the past, I had this exact behavior on (1) a Division "RobotCourses:PSYC" (Psychology), and (2) my main site breadcrumb, which appears at the top of the site page to the right of the "iTunes U" breadcrumb and says "Maiko Covington @ University of Illinois..." For reasons completely unknown to me, this behavior resolved itself yesterday, clicking both of those objects works as expected, although NO one at our site with any edit access did anything on the server.
However, the same behavior has now reappeared, this time on a Division "RobotCourses:CLCV" (Classical Civilizations). Again, I have not done any editing of that Division, nor had anyone logged into it (these Divisions are in a test area where I am developing automation tools).
I am, quite frankly, stumped. But I've done some investigation.
SETUP:
The Division has identity "RobotCourses:CLCV".
This Division contains a single Course with identity "RobotCourses:CLCV:CLCV115:CLCV115All-13564".
Both the Division and the Course are restricted to properly registered academic students. I have developed automation code in a login portal which grants credentials for RobotCourses:CLCV to students registered for courses in the CLCV department (Classical Civilizations) and credentials for RobotCourses:CLCV:CLCV115:CLCV115All-13564 to students registered for CLCV 115 (Classical Civilizations 115 - Mythology of Greece and Rome) specifically.
The Permissions set on RobotCourses:CLCV in particular are:
<Permission>
<Credential>Authenticated@urn:mace:itunesu.com:sites:illinois.edu</Credential>
<Access>No Access</Access>
</Permission>
<Permission>
<Credential>gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV</C redential>
<Access>Download</Access>
</Permission>
The point is to deny access to Authenticated@ (merely authenticated students) and then specifically grant it for people given a "gakusei" credential for RobotCourses:CLCV in particular.
(Note here that "gakusei" is a Japanese word meaning "student," I am using it in my credentials to ensure that my credentials and permissions are not affected by other credentials named "student" set at upper levels and used by some live users of the site, as we do not have a segregated development environment. It is our lowest level of access beyond mere Authenticated@..., designed to give students access to download and "surf to" Divisions and Courses.)
*LOGIN: ISSUING CREDENTIALS:*
The login portal code works successfully, and so when a student "Jane Doe" logs in, she is in fact given appropriate credentials (as she is actually registered for CLCV 115 here at UIUC). From the code generating her login URL, I see:
Issued credentials:
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV:CLCV115:CLCV1 15All-13564
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT:STAT100:STAT1 00X1-13570
(You can see she is also registered for STAT 100).
With the default login URL thus generated, she is taken to the top level of the Site in iTunes, and in fact sees thumbnail links for both STAT (Statistics) and CLCV (Classical Civilizations). Clicking on STAT takes her to the STAT Division where she can then enter the Course STAT 100 with no problems.
*PROBLEM: CAN'T GET TO CLCV FROM THE MAIN PAGE IN THE GUI*
HOWEVER! Clicking on CLCV brings up the login page. If she ignores the login page, she can still access the rest of the site, including STAT, just fine. Logging in again (reissuing her credentials) does not help the situation.
Note that this is not a problem only for Jane Doe, the same thing happens for anyone in CLCV and in fact happens for me as Administrator of the whole site with full access, even.
*ACCESS DIRECTLY TO THE DIVISION BY URL WORKS*
With a slight modification to the login to allow access directly to the RobotCourses:CLCV Division (by adding the handle of the Division to the end of the location), credentials are issued exactly as before:
Issued credentials:
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV:CLCV115:CLCV1 15All-13564
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT:STAT100:STAT1 00X1-13570
and she is taken to the Division page, SUCCESSFULLY. So, it seems she actually HAS access, as expected.
*ACCESS CONFIRMED WITH DEBUGGING:*
Writing some code to generate not the actual login URL but rather a link that takes me to an "iTunes U Access Debugging" page for the Division (figured this out by reading some other posts! :)) I am taken to a page with the following:
(at generated URL https://deimos.apple.com/WebObjects/Core.woa/Browse/illinois.edu.1945806043/xxx5 64?credentials=....)
Received
Destination illinois.edu.1945806043
Identity "Jane X Doe" <[email protected]> (jxdoe) [xxxxxxxxx]
Credentials gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV; gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV:CLCV115:CLCV1 15All-13564; gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT; gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT:STAT100:STAT1 00X1-13570
Time 1236877947
Signature 42ccef92a3298684a7a09eed45adb6b788a700c01645b8b423d33ace120650b0
Analysis
The destination string is valid and the corresponding destination item was found.
The identity string is valid and provides the following information:
Display Name Jane X Doe
Email Address [email protected]
Username jxdoe
User Identifier xxxxxxxxx
The credential string is valid and contains the following 4 recognized credentials:
1. gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV
2. gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV:CLCV115:CLCV1 15All-13564
3. gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT
4. gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT:STAT100:STAT1 00X1-13570
The time string is valid and corresponds to 2009-03-12 17:12:27Z.
The signature string is valid.
Access
Because the received signature and time were valid, the received identity and credentials were accepted by iTunes U.
In addition, the following 2 credentials were automatically added by iTunes U:
1. All@urn:mace:itunesu.com:sites:illinois.edu
2. Authenticated@urn:mace:itunesu.com:sites:illinois.edu
With these credentials, you have browsing and downloading access to the requested destination.
(In case you think to check the sums, be aware I've actually changed the student's name for this example.)
So, as expected, I have access, in fact the student DOES have access, visiting the Division page directly (specifiying its handle as part of the desired location).
*IT'S ONLY CLICKING THE THUMBNAIL ON THE MAIN PAGE THAT BREAKS*
Because the problem is only apparent when clicking the icon for the Division on the main Site page, I have no way (that I know of) to get any information about precisely WHAT is going on, what possibly differs in the GUI-click situation from the "generate me a URL that takes me right there" situation.
At that point I'm fully in the GUI, I'm not sending anything via web services, so I have no idea how I can proceed to debug this from here.
I'm also quite confused at the sudden appearance of this behavior, and the disappearance of this behavior from RobotCourses:PYSC, another Division that was broken in this same way all last week but which magically resumed allowing me access yesterday.
Any suggestions, hints, or advice would be very welcome. Has anyone else even seen behavior similar to this?
Thanks for any information you might have.

Maiko,
I'm confess I'm still trying to get a handle on your problem. You do a fantastic job of describing it ... but I'm just trying to picture it accurately in my head.
I think, were I in your shoes, I'd begin by looking at what the debug page has to say for the specific destination in which you're interested in fixing. In other words, I'm not clear on where, exactly, this destination points ...
Destination illinois.edu.1945806043
Is that your site, or the division within your site that you want to fix? "Normally", you do not need to specify a site handle to get to your site within your transfer CGI ... if you say "uillinois.edu", it's enough to transfer your users to iTunes U ... but every site still has a handle, and you could, if you wanted to, actually specify it in your transfer CGI. For example, this:
Destination uic.edu.1139051993
is for my entire site ... it's my site handle. Whereas this:
Destination uic.edu.1991288441
is for a division within my site ... but it's impossible to tell the difference between "site" and "division" from just the handle (I mean, if I didn't say "this is a site" and "this is a division", there'd be no way for you to know). So when I look at your creds and permissions on your debug page, I can't quite tell if they give you download access for your site, or for the specific division you want to fix. If you could open the debug page with your division as destination (or confirm that that's what we're looking at), it'd rule out some things.

Unable to enter value in editable field of ALV (set_current_cell_via_id)

In the Editable screen of ALV, I have to set the cursor on the 3rd field 'VBELN' ( which is editable ).
Using the method set_current_cell_via_id of ALV grid the focus has been set on the particular field. The field Sales order 'VBELN' is already set as editable (EDIT = 'X').
But still I am unable to enter values unless and until I click anywhere on the screen.
Please help me with the solution.
Thanks in Advance.

No...Whenever my screen is called, the focus is set on the 'VBELN' field but I can not enter the value.
See the code below:
Display the ALV report.
      CALL METHOD grf_alv_popup->set_table_for_first_display
        EXPORTING
          is_layout                     = gs_layout
          it_toolbar_excluding          = gt_exclude
        CHANGING
          it_outtab                     = fp_output[]
          it_fieldcatalog               = gt_fieldcat_popup
        EXCEPTIONS
          invalid_parameter_combination = 1
          program_error                 = 2
          too_many_lines                = 3
          OTHERS                        = 4.
      IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
ls_row-row_id = 1.
ls_col-fieldname = 'VBELN'.
      CALL METHOD grf_alv_popup->set_current_cell_via_id
        EXPORTING
          is_column_id = ls_col
          is_row_no    = ls_row.
With the method set_current_cell_via_id, the field VBELN displays as highlighted but to enter the value I need to click on the screen first.

Why am I unable to enter keyboard strokes for messages in Yahoo when I can otherwise manage my Yahoo messages and when this does not happen with Internet Explo?

I can write and send emails in Yahoo mail when I use Internet Explorer. But I hate Internet Explorer. For the past two days, I have been unable to use the keyboard to enter email recipients, unable to enter anything in the cc, bcc or subject lines, and unable to enter any text in the body of the message. I have installed the Mozilla program to improve the inter-face with Yahoo, but that has not helped.

hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

Unable to enter my youtube channel w IPAD,why? using Safari the youtube doesnt open,*** ?

I am unable to enter my youtube channel with IPAD,
using Safari the you tube doesnt even open!
IM SERIOUSLY DISSAPOINTED w APPLE IPAD..and getting any help from this site is a seriously frustrating experience
this will be my LAST Apple product unless I get it working properly
also how come Using IPAD I cant DOWNLOAD any videos from youtube?
thnx

I AM using the youtube APP!!!
using safari browser did get my into my channel few days back,some videos were opening ok some not,
now I cant even open youtube w Safari
using IPAD YoutubeAPP works good but I can NOT EDIT my channel!
also DOWNOLADING Videos from youtube doesnt work, something the sales GEEK neglected to mention when I bought
this IPAD couple months ago!
Ive heard the IPAD is TOPs in from all the tablets,thats why I got it,I guess I got suckered by all the hoopla and PRAISE bestowed upon it from from all the PC mags and critics and Experts..
care to try again without all the sarcasm now?
thnx

Unable to enter Recovery Mode for my iPad Air

Unable to enter Recovery Mode for my iPad Air
While updating my iPad Air to iOS 7.0.6, it went into an endless loop of cycling between the white Apple screen and the whirling dashes. I can't even reliably shut it down. It seems a prime candidate for recovery mode, but unfortunately I can't get it there. When I try to enter recovery mode by attaching to iTunes then pressing the home key and then reattaching theUSB cable when attached to iTunes, I just go back into the same endless loop Apple screen / whirling dashes cycle.
Right now I'm just waiting for it to power off by letting the battery run down, to see if that jumpstart brings it back up into a different state.
Anything else I can try? Or is my next stop the Genius Bar?
Thank you,
Matt

The timing on this has to be...just...right to enter DFU mode. If that won't work, plug the iPad Air into your computer and set the iPad into recovery mode, like so:
1) Turn off your device. If you can't turn it off, press and hold the Sleep/Wake and Home buttons at the same time and wait a few seconds for it to turn off.
2) Plug the device's USB cable into your computer only.
3) Hold down the device's Home button as you connect the USB cable to it.
4) When you see the Connect to iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 one more time.

I have remote locked my mac using find my iPhone app via my iPad - I am unable to enter the unlock code as the mac keyboard won't pair with the mac - I guess that will teach me for playing...any ideas?

I have remote locked my mac using find my iPhone app via my iPad - I am unable to enter the unlock code as the mac keyboard won't pair with the mac - I guess that will teach me for playing...any ideas?

Thought so - ace - find my phone really needs an unlock function. - another £40...

For some reason the Apple ID window in iTunes and App Store now seems to have a character number constraint. As a result I am unable to enter the final few characters of my Apple ID which I have had for many years. Does anyone know what has caused this?

For some reason the Apple ID window in iTunes and App Store now seems to suddenly have a character number constraint which prevents me using my 29 character Apple ID. As a result I am unable to enter the final few characters of my Apple ID which I have had for many years. Does anyone know what has caused this?

You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
(118441)

When trying to launch iTunes it freezes and I get the message: "Authentication Required. To access this site you need to log in to area "100656 on mellor.co. Your password will be sent in the clear." I am unable to enter a uname or password. Please help!!

When trying to launch iTunes on my PC running Windows 7 it freezes and I get the message: "Authentication Required. To access this site you need to log in to area "100656 on mellor.co. Your password will be sent in the clear." Because iTunes is frizen at this point I am unable to enter a username or password, or in fact do anything. Please help!! I have uninstalled and reinstalled iTunes numerous times as well as attempting all of the fixes that I could find on-line and still no joy.

That sounds extremely phishy to me... iTunes does not require authentication simply to launch it. I suspect you've got something nasty intercepting network traffic. That server may be set up to log the Apple ID that you enter so it can be used fraudulently. Try ComboFix from Bleeping Computer.
FWIW the domain mellor.co is registered to an accountants in Knutsford, Cheshire, UK, and produces the same authentication request if visited with a browser. There is no sign of a "real" publicly visible website at that domain which is a somewhat odd.
tt2

Unable to read the WSDL in OWSM

Hello Everyone,
Iam trying to register BPEL Process on OWSM but it gives me error saying unable to find the WSDL error.
When I test the Web Service directly from the Web Page it does Load the WSDL on the Test Page.
But the moment the wsdl is wrapped with virtualized wsdl it does give the following error
Failed to read WSDL from http://192.168.190.47:9700/ccore/TestGateway/services/SID0003003?wsdl:WSDL not found
As per the troubleshooting document this error could occur for 2 reasons
1. If the Gateway is not registered properly on the Gateway.properties file.
2. If there is proxy or firewall issue.
Since the Service is local to the same server i dont see any firewall or proxy issue and i did check the Gateway properties file where the Gateway ID is register.I do see the ID present on the file.
Can someone tell what might be the issue ?
Regards
Sabir

Hi Sab2
Please go through this thread
OWSM gateway issue
In your case, may be you need to redeploy the gateway
Regards,
Squirell

I reinstalled operating system software on my MacBook Air (Yosemite 10.10.3) and tried reinstalling Adobe Acrobat 9 Pro. I was able to install the software into my Applications folder but I was unable to enter the serial number or go any further with the

I reinstalled operating system software on my MacBook Air (Yosemite 10.10.3) and tried reinstalling Adobe Acrobat 9 Pro. I was able to install the software into my Applications folder but I was unable to enter the serial number or go any further with the installation. When I click on the Adobe Acrobat icon in the Applications folder, nothing happens.

Hi Tom,
kindly check the System requirements | Acrobat family of products—older versions (XI, X, 9)
For serial number message try:
Error "Invalid serial number" | Acrobat 9 | CS4
Thanks,
Atul Saini

Just started up my Mac Mini out of the box, using a USB windows keyboard, it will not recognize letters so I am unable to enter serial number. Anything I can do to get the mini mac right out of the box to recognize the windows keyboard?

Just started up my Mac Mini out of the box, using a USB windows keyboard, it will not recognize letters so I am unable to enter serial number. Anything I can do to get the mini mac right out of the box to recognize the windows keyboard? Do I have to buy an Apple Keyboard to get it to work right out of the box?

Is this a normal USB keyboard or is there anything specialized about it? Does this keyboard require you to install any special software to use it on a Windows box? Or is it usually a plug & play keyboard?
Normally if a Mac does not recognize a keyboard it asks you to press certain keys to identify the keyboard. What is happening on screen with this keyboard? What serial number are you referring to?

Unable to find a WSDL that has a definition for service

Dear all
I have a very simple composite applicationexposing a web service. When I deploy the application I get:
There was an error deploying the composite on soa_server1: Deployment Failed: Unable to find a WSDL that has a definition for service {http://soa/sf/login}bpelprocess1_client_ep and port loginPort_pt. Please make sure that the port attribute for the binding defined in the composite file is correct by checking the namespace, service name, and port name. In addition, check that the WSDL associated with the binding namespace is imported and currently reachable (check the import nodes at the top of the composite file). Finally, validate the HTTP proxy settings for the server.
However the build process shows no errors. The entire application was built using Jdeveloper 11.1.1.5 using a pre-constructed WSDL. The SOA suite is 11.1.1.5
Any pointers will be really appreciated.
Thanks
The composite is this:
<?xml version="1.0" encoding="UTF-8" ?>

<composite name="SOA2" revision="1.0" label="2013-02-28_14-25-14_553"
mode="active" state="on" xmlns="http://xmlns.oracle.com/sca/1.0"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy"
xmlns:orawsp="http://schemas.oracle.com/ws/2006/01/policy"
xmlns:ui="http://xmlns.oracle.com/soa/designer/">
<import namespace="http://soa/sf/login" location="loginToSFDC.wsdl"
importType="wsdl"/>
<service name="bpelprocess1_client_ep" ui:wsdlLocation="loginToSFDC.wsdl">
<interface.wsdl interface="http://soa/sf/login#wsdl.interface(loginPort)"/>
<binding.ws port="http://soa/sf/login#wsdl.endpoint(bpelprocess1_client_ep/loginPort_pt)"/>
</service>
<component name="BPELProcess1" version="2.0">
<implementation.bpel src="BPELProcess1.bpel"/>
<property name="bpel.config.transaction" type="xs:string" many="false">required</property>
</component>
<wire>
<source.uri>bpelprocess1_client_ep</source.uri>
<target.uri>BPELProcess1/bpelprocess1_client</target.uri>
</wire>
</composite>
The WSDL used to generate the BPEL is:
<?xml version= '1.0' encoding= 'UTF-8' ?>
<definitions
targetNamespace="http://soa/sf/login"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns1="http://soa/sf/login"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:flt="urn:fault.partner.soap.sforce.com"
xmlns:obj="urn:sobject.partner.soap.sforce.com"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:typ="urn:partner.soap.sforce.com"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
>
<types>
<xsd:schema targetNamespace="http://uk.gov.fca.sf/login" elementFormDefault="qualified" xmlns:tns1="http://uk.gov.fca.sf/login"
xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:flt="urn:fault.partner.soap.sforce.com"
xmlns:obj="urn:sobject.partner.soap.sforce.com" xmlns:typ="urn:partner.soap.sforce.com"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/">
<xsd:import namespace="urn:partner.soap.sforce.com" schemaLocation="xsd/partner_types.xsd"/>
<xsd:import namespace="urn:fault.partner.soap.sforce.com" schemaLocation="xsd/partner_faults.xsd"/>
<xsd:import namespace="urn:sobject.partner.soap.sforce.com" schemaLocation="xsd/partner_objects.xsd"/>
</xsd:schema>
</types>
<message name="loginInMessage">
<part name="loginIn" element="typ:login"/>
<part name="LoginScopeHeaderIn" element="typ:LoginScopeHeader"/>
<part name="CallOptionsIn" element="typ:CallOptions"/>
</message>
<message name="loginOutMessage">
<part name="return" element="typ:loginResponse"/>
</message>
<portType name="loginPort">
<operation name="loginOp">
<input message="tns1:loginInMessage"/>
<output message="tns1:loginOutMessage"/>
</operation>
</portType>
<binding name="loginPortSOAP11Binding" type="tns1:loginPort">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="loginOp">
<soap:operation style="document" soapAction="http://soa:8101/login/loginOp"/>
<input>
<soap:body use="literal" parts="in"/>
</input>
<output>
<soap:body use="literal" parts="return"/>
</output>
</operation>
</binding>
<binding name="loginPortSOAP12Binding" type="tns1:loginPort">
<soap12:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="loginOp">
<soap12:operation style="document" soapAction="http://uk.gov.fca.sf:7101/login/loginOp" soapActionRequired="false"/>
<input>
<soap12:body use="literal" parts="in"/>
</input>
<output>
<soap12:body use="literal" parts="return"/>
</output>
</operation>
</binding>
<service name="loginSrvc">
<port name="login_port_11" binding="tns1:loginPortSOAP11Binding">
</port>
<port name="login_port_12" binding="tns1:loginPortSOAP12Binding">
</port>
</service>
<partnerLinkType name="ProviderRole"
xmlns="http://schemas.xmlsoap.org/ws/2003/05/partner-link/">
<role name="Role1">
<portType name="tns1:loginPort"/>
</role>
</partnerLinkType>
</definitions>

Hi,
I don't see a loginPort_pt port in the wsdl, but it is referenced by the composite...
There's only ports login_port_11 and login_port_12 defined...
Cheers,
Vlad

Unable to view google and facebook in safari

Unable to view google and facebook in safari on ios 7.0.3 on my ipad mini. The page is trying to reload repeatedly and chrome browser is written on the tab where google/Facebook should be.

I am not sure of the reasons but that is the normal
appearance in Safari, at least it is what I have seen. I think the
issue is how Safari handles things rather than what RoboHelp
produces.
In looking at other help products before going for RoboHelp,
did you download some trial versions of other products and have you
checked their output in Safari?
Maybe someone with more knowledge of Safari can comment?
For what it may be worth, only 1.3% of the visitors to my
site use Safari so that wouldn't upset me too much. Of course the
percentage may be different and more important for you. I suspect
Safari users are used to such things.
Right or wrong, IE and Firefox are the biggies.

Unable to enter Google WSDL

Similar Messages

Maybe you are looking for