Unable to enter IR, ID
Hi, I have installed Windows vista and NWDS 7.0, JVM 1.4.2_09 and I´m unable to get into Integration Repository and Integration Directory of XI
I executed it on Netscape 9.0b3 and nothing change, it´s trying to open: repository.jnlp and directory.jnlp
Any have an idea?
Thanks in advance.
Nobody? Any comments about vista and Integration Builder?
Thanks!!
Similar Messages
-
Unable to enter a Division for which I have proper credentials, via the GUI
I have a Division which I am unable to enter, either as a student or as the full site Administrator, from the GUI.
When I log into the main Site page, I see the link for the Division (as I should - I have DOWNLOAD permissions for the Division). However when I click the link (the thumbnail image) I am always, 100% of the time, rejected and sent to the login page. Ignoring that, I still have all of my proper credentials and may continue to freely access other parts of the site.
In the past, I had this exact behavior on (1) a Division "RobotCourses:PSYC" (Psychology), and (2) my main site breadcrumb, which appears at the top of the site page to the right of the "iTunes U" breadcrumb and says "Maiko Covington @ University of Illinois..." For reasons completely unknown to me, this behavior resolved itself yesterday, clicking both of those objects works as expected, although NO one at our site with any edit access did anything on the server.
However, the same behavior has now reappeared, this time on a Division "RobotCourses:CLCV" (Classical Civilizations). Again, I have not done any editing of that Division, nor had anyone logged into it (these Divisions are in a test area where I am developing automation tools).
I am, quite frankly, stumped. But I've done some investigation.
SETUP:
The Division has identity "RobotCourses:CLCV".
This Division contains a single Course with identity "RobotCourses:CLCV:CLCV115:CLCV115All-13564".
Both the Division and the Course are restricted to properly registered academic students. I have developed automation code in a login portal which grants credentials for RobotCourses:CLCV to students registered for courses in the CLCV department (Classical Civilizations) and credentials for RobotCourses:CLCV:CLCV115:CLCV115All-13564 to students registered for CLCV 115 (Classical Civilizations 115 - Mythology of Greece and Rome) specifically.
The Permissions set on RobotCourses:CLCV in particular are:
<Permission>
<Credential>Authenticated@urn:mace:itunesu.com:sites:illinois.edu</Credential>
<Access>No Access</Access>
</Permission>
<Permission>
<Credential>gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV</C redential>
<Access>Download</Access>
</Permission>
The point is to deny access to Authenticated@ (merely authenticated students) and then specifically grant it for people given a "gakusei" credential for RobotCourses:CLCV in particular.
(Note here that "gakusei" is a Japanese word meaning "student," I am using it in my credentials to ensure that my credentials and permissions are not affected by other credentials named "student" set at upper levels and used by some live users of the site, as we do not have a segregated development environment. It is our lowest level of access beyond mere Authenticated@..., designed to give students access to download and "surf to" Divisions and Courses.)
*LOGIN: ISSUING CREDENTIALS:*
The login portal code works successfully, and so when a student "Jane Doe" logs in, she is in fact given appropriate credentials (as she is actually registered for CLCV 115 here at UIUC). From the code generating her login URL, I see:
Issued credentials:
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV:CLCV115:CLCV1 15All-13564
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT:STAT100:STAT1 00X1-13570
(You can see she is also registered for STAT 100).
With the default login URL thus generated, she is taken to the top level of the Site in iTunes, and in fact sees thumbnail links for both STAT (Statistics) and CLCV (Classical Civilizations). Clicking on STAT takes her to the STAT Division where she can then enter the Course STAT 100 with no problems.
*PROBLEM: CAN'T GET TO CLCV FROM THE MAIN PAGE IN THE GUI*
HOWEVER! Clicking on CLCV brings up the login page. If she ignores the login page, she can still access the rest of the site, including STAT, just fine. Logging in again (reissuing her credentials) does not help the situation.
Note that this is not a problem only for Jane Doe, the same thing happens for anyone in CLCV and in fact happens for me as Administrator of the whole site with full access, even.
*ACCESS DIRECTLY TO THE DIVISION BY URL WORKS*
With a slight modification to the login to allow access directly to the RobotCourses:CLCV Division (by adding the handle of the Division to the end of the location), credentials are issued exactly as before:
Issued credentials:
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV:CLCV115:CLCV1 15All-13564
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT:STAT100:STAT1 00X1-13570
and she is taken to the Division page, SUCCESSFULLY. So, it seems she actually HAS access, as expected.
*ACCESS CONFIRMED WITH DEBUGGING:*
Writing some code to generate not the actual login URL but rather a link that takes me to an "iTunes U Access Debugging" page for the Division (figured this out by reading some other posts! :)) I am taken to a page with the following:
(at generated URL https://deimos.apple.com/WebObjects/Core.woa/Browse/illinois.edu.1945806043/xxx5 64?credentials=....)
Received
Destination illinois.edu.1945806043
Identity "Jane X Doe" <[email protected]> (jxdoe) [xxxxxxxxx]
Credentials gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV; gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV:CLCV115:CLCV1 15All-13564; gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT; gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT:STAT100:STAT1 00X1-13570
Time 1236877947
Signature 42ccef92a3298684a7a09eed45adb6b788a700c01645b8b423d33ace120650b0
Analysis
The destination string is valid and the corresponding destination item was found.
The identity string is valid and provides the following information:
Display Name Jane X Doe
Email Address [email protected]
Username jxdoe
User Identifier xxxxxxxxx
The credential string is valid and contains the following 4 recognized credentials:
1. gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV
2. gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV:CLCV115:CLCV1 15All-13564
3. gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT
4. gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT:STAT100:STAT1 00X1-13570
The time string is valid and corresponds to 2009-03-12 17:12:27Z.
The signature string is valid.
Access
Because the received signature and time were valid, the received identity and credentials were accepted by iTunes U.
In addition, the following 2 credentials were automatically added by iTunes U:
1. All@urn:mace:itunesu.com:sites:illinois.edu
2. Authenticated@urn:mace:itunesu.com:sites:illinois.edu
With these credentials, you have browsing and downloading access to the requested destination.
(In case you think to check the sums, be aware I've actually changed the student's name for this example.)
So, as expected, I have access, in fact the student DOES have access, visiting the Division page directly (specifiying its handle as part of the desired location).
*IT'S ONLY CLICKING THE THUMBNAIL ON THE MAIN PAGE THAT BREAKS*
Because the problem is only apparent when clicking the icon for the Division on the main Site page, I have no way (that I know of) to get any information about precisely WHAT is going on, what possibly differs in the GUI-click situation from the "generate me a URL that takes me right there" situation.
At that point I'm fully in the GUI, I'm not sending anything via web services, so I have no idea how I can proceed to debug this from here.
I'm also quite confused at the sudden appearance of this behavior, and the disappearance of this behavior from RobotCourses:PYSC, another Division that was broken in this same way all last week but which magically resumed allowing me access yesterday.
Any suggestions, hints, or advice would be very welcome. Has anyone else even seen behavior similar to this?
Thanks for any information you might have.Maiko,
I'm confess I'm still trying to get a handle on your problem. You do a fantastic job of describing it ... but I'm just trying to picture it accurately in my head.
I think, were I in your shoes, I'd begin by looking at what the debug page has to say for the specific destination in which you're interested in fixing. In other words, I'm not clear on where, exactly, this destination points ...
Destination illinois.edu.1945806043
Is that your site, or the division within your site that you want to fix? "Normally", you do not need to specify a site handle to get to your site within your transfer CGI ... if you say "uillinois.edu", it's enough to transfer your users to iTunes U ... but every site still has a handle, and you could, if you wanted to, actually specify it in your transfer CGI. For example, this:
Destination uic.edu.1139051993
is for my entire site ... it's my site handle. Whereas this:
Destination uic.edu.1991288441
is for a division within my site ... but it's impossible to tell the difference between "site" and "division" from just the handle (I mean, if I didn't say "this is a site" and "this is a division", there'd be no way for you to know). So when I look at your creds and permissions on your debug page, I can't quite tell if they give you download access for your site, or for the specific division you want to fix. If you could open the debug page with your division as destination (or confirm that that's what we're looking at), it'd rule out some things. -
Unable to enter value in editable field of ALV (set_current_cell_via_id)
In the Editable screen of ALV, I have to set the cursor on the 3rd field 'VBELN' ( which is editable ).
Using the method set_current_cell_via_id of ALV grid the focus has been set on the particular field. The field Sales order 'VBELN' is already set as editable (EDIT = 'X').
But still I am unable to enter values unless and until I click anywhere on the screen.
Please help me with the solution.
Thanks in Advance.No...Whenever my screen is called, the focus is set on the 'VBELN' field but I can not enter the value.
See the code below:
Display the ALV report.
CALL METHOD grf_alv_popup->set_table_for_first_display
EXPORTING
is_layout = gs_layout
it_toolbar_excluding = gt_exclude
CHANGING
it_outtab = fp_output[]
it_fieldcatalog = gt_fieldcat_popup
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ls_row-row_id = 1.
ls_col-fieldname = 'VBELN'.
CALL METHOD grf_alv_popup->set_current_cell_via_id
EXPORTING
is_column_id = ls_col
is_row_no = ls_row.
With the method set_current_cell_via_id, the field VBELN displays as highlighted but to enter the value I need to click on the screen first. -
I can write and send emails in Yahoo mail when I use Internet Explorer. But I hate Internet Explorer. For the past two days, I have been unable to use the keyboard to enter email recipients, unable to enter anything in the cc, bcc or subject lines, and unable to enter any text in the body of the message. I have installed the Mozilla program to improve the inter-face with Yahoo, but that has not helped.
hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] -
Unable to enter my youtube channel w IPAD,why? using Safari the youtube doesnt open,*** ?
I am unable to enter my youtube channel with IPAD,
using Safari the you tube doesnt even open!
IM SERIOUSLY DISSAPOINTED w APPLE IPAD..and getting any help from this site is a seriously frustrating experience
this will be my LAST Apple product unless I get it working properly
also how come Using IPAD I cant DOWNLOAD any videos from youtube?
thnxI AM using the youtube APP!!!
using safari browser did get my into my channel few days back,some videos were opening ok some not,
now I cant even open youtube w Safari
using IPAD YoutubeAPP works good but I can NOT EDIT my channel!
also DOWNOLADING Videos from youtube doesnt work, something the sales GEEK neglected to mention when I bought
this IPAD couple months ago!
Ive heard the IPAD is TOPs in from all the tablets,thats why I got it,I guess I got suckered by all the hoopla and PRAISE bestowed upon it from from all the PC mags and critics and Experts..
care to try again without all the sarcasm now?
thnx -
Unable to enter Recovery Mode for my iPad Air
Unable to enter Recovery Mode for my iPad Air
While updating my iPad Air to iOS 7.0.6, it went into an endless loop of cycling between the white Apple screen and the whirling dashes. I can't even reliably shut it down. It seems a prime candidate for recovery mode, but unfortunately I can't get it there. When I try to enter recovery mode by attaching to iTunes then pressing the home key and then reattaching theUSB cable when attached to iTunes, I just go back into the same endless loop Apple screen / whirling dashes cycle.
Right now I'm just waiting for it to power off by letting the battery run down, to see if that jumpstart brings it back up into a different state.
Anything else I can try? Or is my next stop the Genius Bar?
Thank you,
MattThe timing on this has to be...just...right to enter DFU mode. If that won't work, plug the iPad Air into your computer and set the iPad into recovery mode, like so:
1) Turn off your device. If you can't turn it off, press and hold the Sleep/Wake and Home buttons at the same time and wait a few seconds for it to turn off.
2) Plug the device's USB cable into your computer only.
3) Hold down the device's Home button as you connect the USB cable to it.
4) When you see the Connect to iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 one more time. -
I have remote locked my mac using find my iPhone app via my iPad - I am unable to enter the unlock code as the mac keyboard won't pair with the mac - I guess that will teach me for playing...any ideas?
Thought so - ace - find my phone really needs an unlock function. - another £40...
-
For some reason the Apple ID window in iTunes and App Store now seems to suddenly have a character number constraint which prevents me using my 29 character Apple ID. As a result I am unable to enter the final few characters of my Apple ID which I have had for many years. Does anyone know what has caused this?
You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
(118441) -
When trying to launch iTunes on my PC running Windows 7 it freezes and I get the message: "Authentication Required. To access this site you need to log in to area "100656 on mellor.co. Your password will be sent in the clear." Because iTunes is frizen at this point I am unable to enter a username or password, or in fact do anything. Please help!! I have uninstalled and reinstalled iTunes numerous times as well as attempting all of the fixes that I could find on-line and still no joy.
That sounds extremely phishy to me... iTunes does not require authentication simply to launch it. I suspect you've got something nasty intercepting network traffic. That server may be set up to log the Apple ID that you enter so it can be used fraudulently. Try ComboFix from Bleeping Computer.
FWIW the domain mellor.co is registered to an accountants in Knutsford, Cheshire, UK, and produces the same authentication request if visited with a browser. There is no sign of a "real" publicly visible website at that domain which is a somewhat odd.
tt2 -
I reinstalled operating system software on my MacBook Air (Yosemite 10.10.3) and tried reinstalling Adobe Acrobat 9 Pro. I was able to install the software into my Applications folder but I was unable to enter the serial number or go any further with the installation. When I click on the Adobe Acrobat icon in the Applications folder, nothing happens.
Hi Tom,
kindly check the System requirements | Acrobat family of products—older versions (XI, X, 9)
For serial number message try:
Error "Invalid serial number" | Acrobat 9 | CS4
Thanks,
Atul Saini -
I am unable to enter data in a Google sheet via iPad.
I am unable to enter data in a Google sheet on my iPad.
The admin on the sheet says it's open to anyone with the link.
I can enter from my iMac but not from my iPad (current ios.)
What am I doing wrong?It had occurred to me that the old shutdown/restart routine can cure a multitude of problems. That's what I did and it took care of all of the problems in all my Numbers documents.
-
Just started up my Mac Mini out of the box, using a USB windows keyboard, it will not recognize letters so I am unable to enter serial number. Anything I can do to get the mini mac right out of the box to recognize the windows keyboard? Do I have to buy an Apple Keyboard to get it to work right out of the box?
Is this a normal USB keyboard or is there anything specialized about it? Does this keyboard require you to install any special software to use it on a Windows box? Or is it usually a plug & play keyboard?
Normally if a Mac does not recognize a keyboard it asks you to press certain keys to identify the keyboard. What is happening on screen with this keyboard? What serial number are you referring to? -
Unable to enter MOSS 2007 License Key after SP2 upgrade - trial period about to expire
We are unable to enter the license key as stated in the title. The field does not allow any input. Central Admin shows that our trial period is about to expire very soon.
Our environment is MOSS 2007 (Office Sharepoint Server with Enterprise Client Access License) on Server 2003. SP2 is installed, the August 2011 CU (KB2553020) is installed, and the Microsoft suggested fix for this known problem is also installed (KB971620).
ie. Product expiration date is activated incorrectly. Since those fixes do not work, we are left with the manual entry of the license key. However, that also does not work.
Still, it shows that the trial period is about to expire. Apparently this fix is also included in any of the CU's after June 2009.
We have a valid license key for the Enterprise version and have the Enterprise client licenses as well. The License Synchronizer Job has succeeded.
I have searched the forum and have not seen a answer that resolves this issue.
Does anyone know what to try next ? We are running out of time.
Thanks in advance,
Peter
<></>
<> </>
Hi,
As far as I know, this issue occurs because the installation of the 2007 Microsoft Office SP2 activates the production expiration data incorrectly.
To resolve this issue, please install one of the following updates according to the following links:
Update for 2007 Microsoft Office servers (KB971620), 32-Bit Edition
Download the Update for 2007 Microsoft Office servers (KB971620), 32-Bit Edition package now. (http://download.microsoft.com/download/2/F/5/2F51AB71-1325-49D2-9CB9-18DEC4780E99/office2007-kb971620-fullfile-x86-glb.exe)
Update for 2007 Microsoft Office servers (KB971620), 64-Bit Edition
Download the Update for 2007 Microsoft Office servers (KB971620), 64-Bit Edition package now. (http://download.microsoft.com/download/5/B/B/5BBD34A9-C528-42B0-8A5F-9A8997B25C32/office2007-kb971620-fullfile-x64-glb.exe)
For more information about this issue, see
http://support.microsoft.com/kb/971620
After you install one of these updates, you do not have to redeploy the service pack. For information about how to deploy this update, please see the Microsoft TechNet article on how to deploy server updates:
http://technet.microsoft.com/en-us/library/cc263467.aspx
Thanks,
Rock Wang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Rock Wang TechNet Community Support -
Unable to enter text in text area box
Hi all,
I have an issue. unable to enter comments in the text area in the client side application while i can able to enter from my system. But when they login and logout they can able to enter.
When they again comeback to the page they could not. It is very difficult to logout everytime.
Is it a browser issue or any text area functionality?
Browser is IE
apex version is 4.0
can anyone please help?
Regards
Raj.RajEndiran wrote:
Hi all,
I have an issue. unable to enter comments in the text area in the client side application while i can able to enter from my system. But when they login and logout they can able to enter.
When they again comeback to the page they could not. It is very difficult to logout everytime.
Is it a browser issue or any text area functionality?
Browser is IE
apex version is 4.0
can anyone please help?
Regards
Raj.Wrong forum.
Entering information into a form has nothing to do with SQL or PL/SQL.
Try the apex forum: Oracle Application Express (APEX) -
Unable to enter text in popup window
Hi,
I am new to OATS OpenScript. I am unable to enter text in the popup window.
Here's my situation in detail:
My application is in Oracle Siebel and the pop up is a webpage dialog.
When I click on the Button in Siebel application, the webpage dialog pops up and there is a text box and a Submit button.
When I was recording, I was unable to record the webpage dialog as it was not identified by Openscript recorder.
Hence, I recorded the webpage seperately and the standalone scripts runs fine. It is able to navigate to the page and enter the text in textbox and click submit button.
Now I am trying to integrate those Webpage XPath in my existing script but it fails to recognize the webpage or the textbox from the popup webpage dialog.
Has anyone able to figure out how to record the popup windows using OATS OpenScript? Please help.
Thanks,
SapnaHi Deepu,
Thanks for replying.
web:window[@index='0' or @title='Enter Card Number']/web:document[@index='0']/web:body[@index='0']
web:window[@index='0' or @title='Enter Card Number']/web:document[@index='0']/web:input_text[@id='txt_name' or @name='name' or @index='0']
web:window[@index='0' or @title='Enter Card Number']/web:document[@index='0']/web:input_submit[@name='submit' or @value='Submit' or @index='0']
These are the XPaths I get when I record that webpage seperately.
Also when I was recording the webpage alongwith the siebel app, I got these XPaths for the same objects:
/web:dialog_unknown[@text='Enter Card Number -- Webpage Dialog' and @winClass='Internet Explorer_TridentDlgFrame' and @index='0']/web:accText[@index='2']
Submit Button
/web:dialog_unknown[@text='Enter Card Number -- Webpage Dialog' and @winClass='Internet Explorer_TridentDlgFrame' and @index='1']/web:accPushButton[@index='0' or @name='Submit']
I also read in one of the forums that if the object is not added, I need to add it manually. How can i do that?:
Popup wb window is not detected by openscript
Thanks,
Sapna -
Unable to enter the amount in schedules
Hello Experts
I am Unable to enter the amount in schedule in package when opened via package manager.All seems to be greyed out and edit is not possible.
Appreciate prompt response.
ThanksThere are many reasons that could explain why you can not input an amount in a schedule cell.
You should check the followings items :
- category builder (account families, flow behaviors, dimensional analyses). Also make sure it is ditributed.
- schedule design (initialization of dimensions and grouping method, cell formulas, read only cell option)
- data entry restrictions associated to the current reporting
- user rights
- package lock/protection
Regards.
Maybe you are looking for
-
Quick Preview toggle - images appear very soft?
I have noticed that when using Quick Preview to run through images in my projects all images appear sharp, however if I toggle quick preview off and then back on again the image never sharpens. This is similar to the effect you would get on first vie
-
Deploy Custom Adaptermodule on PI7.1
Is it possible to deploy jar Files on PI7.1 or how to deploy it? do i need an sda or sca file?
-
What symbol on screen top next to battery that looks like a house or old phone ? I' can't find the Celular data even thought I did the network reset! I appreciate some info !
-
How to modify your age on your Creative Cloud profile ?
Can anyone explain me how to change my age on my Creative Cloud profile ?
-
After a clean install of Yosemite, the App Store is asking me to update to Beta 5.
I was running the public betas, updated all the way to beta 6. When Yosemite was released last week, I backed up my computer with Time Machine, and erased the disk. I installed Yosemite as a new installation. Shortly after, the App Store is telling m