Unable to enter keystrokes on envy 110 keyboard.

The keyboard has stopped accepting the keystrokes when using the on board keyboard. Nothing is working.....the shift, num keys, Caps, or lower case.
Is there an other way of entering my SIDD name and network password??
Thanks,
Tony

Hello there! Welcome to the forums
@tonymtprospect
If the front panel of your Envy 110 is malfunctioning and not working for you, I would recommend a power reset and ensuring that the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help the front panel issue.
You will need the front panel to enter your network information. If the printer has any hardware issues, such as the currect issue, it could cause a domino of problems, so it's always best to troubleshoot and fix the current issue before moving on.
You can also try plugging the printer in to a different wall outlet, to see if that helps.
If the panel does not work properly afterwards, I would lastly suggest technical support.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Happy Friday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

Why am I unable to enter keyboard strokes for messages in Yahoo when I can otherwise manage my Yahoo messages and when this does not happen with Internet Explo?

I can write and send emails in Yahoo mail when I use Internet Explorer. But I hate Internet Explorer. For the past two days, I have been unable to use the keyboard to enter email recipients, unable to enter anything in the cc, bcc or subject lines, and unable to enter any text in the body of the message. I have installed the Mozilla program to improve the inter-face with Yahoo, but that has not helped.

hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

I have remote locked my mac using find my iPhone app via my iPad - I am unable to enter the unlock code as the mac keyboard won't pair with the mac - I guess that will teach me for playing...any ideas?

I have remote locked my mac using find my iPhone app via my iPad - I am unable to enter the unlock code as the mac keyboard won't pair with the mac - I guess that will teach me for playing...any ideas?

Thought so - ace - find my phone really needs an unlock function. - another £40...

Just started up my Mac Mini out of the box, using a USB windows keyboard, it will not recognize letters so I am unable to enter serial number. Anything I can do to get the mini mac right out of the box to recognize the windows keyboard?

Just started up my Mac Mini out of the box, using a USB windows keyboard, it will not recognize letters so I am unable to enter serial number. Anything I can do to get the mini mac right out of the box to recognize the windows keyboard? Do I have to buy an Apple Keyboard to get it to work right out of the box?

Is this a normal USB keyboard or is there anything specialized about it? Does this keyboard require you to install any special software to use it on a Windows box? Or is it usually a plug & play keyboard?
Normally if a Mac does not recognize a keyboard it asks you to press certain keys to identify the keyboard. What is happening on screen with this keyboard? What serial number are you referring to?

N9 French virtual keyboard bug - unable to enter à...

On my Nokia N9, with the French virtual keyboards set, I am unable to enter essential characters such as " à " (a grave), " é " (e acute), " è " (e grave), etc.
Is there a way to enter these characters? Or a solution to this bug?
The only accented character supported for inputs is " ç " (c with a cedillla). This character is rarely used compared to à (a with grace accent), é (e with an acute accent) and è (e with a grave accent).
N900 (physical and virtual) keyboards supported all the above and other accented characters.
A weird twist, there are multiple types of quotation marks supported on the French virtual keyboard (which one would deem totally redundant).
Solved!
Go to Solution.

Akashiiii, as Pj98 says, you have to long-press on a character to see the special ones. I've got the french keyboard too and i there's no problem with mine. Just press and move your finger to left or right.
Belgian guy speaking french. Sorry for mistakes in my language ;-)

Unable to enter keyboard shortcut preferences

OK, I've received my new aluminum keyboard today. I connected it to my "old" (November 2006) iMac 20" 2.16 GHz and installed the Keyboard Software Update 1.1. I'm encountering the issue with non-working F3 and F4 keys, like (almost) everyone else, but that's not the problem bothering me right now (I'll just wait for an update).
What's new is that I'm unable to enter the "Preferences -> Keyboard and mouse -> Keyboard shortcuts" pane. If I click on it, it just "hangs", with the "Keyboard shortcuts" highlighted, but still showing the contents of the previously selected tab.
I can then quit Preferences normally (it doesn't fully crash). If I re-enter, the same thing happens.
I have already cleared all caches, repaired preferences, re-installed the Keyboard Software Update, created a new user account, deleted com.apple.HIToolbox.plist (both the user's and the system's), even zapped the PRAM - nothing helps.
Other software I have installed which might interfere are Butler and Witch - disabling them didn't help.
Any ideas of what else could be causing this?
Thanks for your help

I also have an error message in console.log every time I try to open that tab:
2007-08-20 19:50:56.941 System Preferences(521) * -(NSCFString count): selector not recognized (self = 0x1641b510)
There's more - this only happens if I'm using the Italian localized version of Preferences. If I use the English version it works. It definitely looks like a bug.
Can anyone confirm it's happening on their system as well if switching to Italian?
If it's really a bug, what's the best way to file it with Apple?
Message was edited by: ManuCH

Connecting macbook pro to HP Envy 110

I have been trying to link my macbook to HP Envy 110 for weeks now. Initially i managed it by uding the IP address as the printer never appeared in the set-up wizard. However, the next time I tried it, the IP address had changed on the printer but the macbook did not recognise it. Now i can't even get it to print, even if i change the IP address every time.
If i add printer under system preferences, my only option is to enter the IP address from the printer as none are listed. Even if I do this it says unable to verify your printer on your network, do you want to create printer anyway. I i say yes, it creates a printer in the list but it doesn't allow me to print for it. it always says printer in use when i put somehting in the print queue.
Can anyone help please.

Start here:
http://h10025.www1.hp.com/ewfrf/wc/product?product=5070125&lc=en&cc=us&dlc=en&la ng=en&cc=us
If all else fails go here:
http://h30434.www3.hp.com/psg/

I am unable to enter a £ symbol in a wifi password has anyone had a similar problem and found a solution?

I am unable to enter a £ symbol to a wifi password has anyone had similar problem and found a solution?

On the US keyboard, it's option + 3.
However, when I try to enter that combination in Mail 4.4 or the Safari 5.0.5 browser, it is apparently has some reserved function and opens another window. It does seem to produce the correct character in Firefox 4.01
If possible, I'd suggest changing the WiFi password so that it does not included any 'reserved' keystrokes.

Hp mini 110 keyboard-spilled tea on it

Hi, I spilled tea on my hp mini 110 keyboard. I tried cleaning under the keys but that didn't help so I ordered a new keyboard. After installing the new keyboard all the keys worked minus the "Enter" key. The next day all of the keys on the middle row stopped working: A S D F G H J K L : " Enter.
My question is, could it be the new keyboard that is defective or maybe the tea that was spilled went beyond the keyboard onto the components underneath it that could be causing the problem. I may end up having to trash the whole netbook.
Thank You in advance for any help to solve this problem.

Hi there @reggiebat
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that when you click on an icon it asks if you want to send it to the recycle bin. I am happy to help with this.
It sounds to me like both of your computers have a virus or other malicious software. I would recommend you check both systems thoroughly. The following pages have some information to get you started with this.
HP PCs - Resolving and Preventing Viruses on Your Computer (Windows 7, Vista, XP)
About Spyware, Adware, and Browser Hijacking Software
Another option would be to take one of both of them to a local computer shop that offers the service and have them check and clean your system.
Let me know if you need any further help.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Unable to send keystrokes and Mouse strokes in during WinPE phase with iDRAC7

Primary Site running SCCM 2012 R2
Unable to send keystrokes and Mouse strokes in during WinPE phase. The system is awaiting response "password" on Task Sequence step however the machine won't accept keyboard and mouse inputs. This happens with iDRAC7 Version1.0.
Trying to image Dell servers with SCCM 2012 R2. The desktops work fine and able to image.

Download and install iDRAC7 firmware to revision 1.57.57 or later.

When sharing a video on You Tube I am unable to enter text

When sharing a video from You Tube to Facebook I am unable to enter text in the text box. The video does go onto Facebook, I just can't enter a comment.
== This happened ==
Every time Firefox opened
== Installed Firefox

I had exactly the same issue, that the Apple wireless keyboard became unpaired, and I couldn't get past the password-protected log-in screen, because I didn't have a wired keyboard laying around.
OK folks,
Discovered by trial and error that it was the wireless mouse (not an Apple brand) that was preventing the keyboard from pairing, even though it's not a bluetooth mouse...
Here's the steps I used...
1. Disconnected the USB mouse cord from the Mac Mini.
2. Turned off the Apple wireless keyboard from switch on the back.
3. Turn Mac Mini off, then back on.
4. Waited for it to boot up as far as the password-protected screen.
5. Turned on the Apple wireless keyboard, waited for it to stop blinking, indicating (hoping) that it paired up.
6. And voila... was able to then type in the password...
7. Then plugged the non-Apple wireless mouse sensor cord back into the Mac Mini's USB port
I also immediately went in to the MacMini's Sharing options and set that up for remote management in case something else happens down the road for other problems...
Thanks though to all who suggested solutions... they may come in handy in the future.
Hope this helps someone else...
Lynda

Envy 110 settings menu password

Hi, I am trying to get into the settings menu for my Envy 110 on my computer, I get a window appear titled "Windows Security" and the message "The server 192.168.0.13 at admin requires a password" I have tried to enter my HP user name and password but this must be incorrect, it then says on the HP screen "your session is locked, please try later" I am the sole user and administrator for this computer, although it does connect to a network at my employers, is this Windows security something to do with this or the HP site ?

@mfmkhatri
What issue are you having? Are you trying to get into your printer's ews?

Unable to enter a Division for which I have proper credentials, via the GUI

I have a Division which I am unable to enter, either as a student or as the full site Administrator, from the GUI.
When I log into the main Site page, I see the link for the Division (as I should - I have DOWNLOAD permissions for the Division). However when I click the link (the thumbnail image) I am always, 100% of the time, rejected and sent to the login page. Ignoring that, I still have all of my proper credentials and may continue to freely access other parts of the site.
In the past, I had this exact behavior on (1) a Division "RobotCourses:PSYC" (Psychology), and (2) my main site breadcrumb, which appears at the top of the site page to the right of the "iTunes U" breadcrumb and says "Maiko Covington @ University of Illinois..." For reasons completely unknown to me, this behavior resolved itself yesterday, clicking both of those objects works as expected, although NO one at our site with any edit access did anything on the server.
However, the same behavior has now reappeared, this time on a Division "RobotCourses:CLCV" (Classical Civilizations). Again, I have not done any editing of that Division, nor had anyone logged into it (these Divisions are in a test area where I am developing automation tools).
I am, quite frankly, stumped. But I've done some investigation.
SETUP:
The Division has identity "RobotCourses:CLCV".
This Division contains a single Course with identity "RobotCourses:CLCV:CLCV115:CLCV115All-13564".
Both the Division and the Course are restricted to properly registered academic students. I have developed automation code in a login portal which grants credentials for RobotCourses:CLCV to students registered for courses in the CLCV department (Classical Civilizations) and credentials for RobotCourses:CLCV:CLCV115:CLCV115All-13564 to students registered for CLCV 115 (Classical Civilizations 115 - Mythology of Greece and Rome) specifically.
The Permissions set on RobotCourses:CLCV in particular are:
<Permission>
<Credential>Authenticated@urn:mace:itunesu.com:sites:illinois.edu</Credential>
<Access>No Access</Access>
</Permission>
<Permission>
<Credential>gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV</C redential>
<Access>Download</Access>
</Permission>
The point is to deny access to Authenticated@ (merely authenticated students) and then specifically grant it for people given a "gakusei" credential for RobotCourses:CLCV in particular.
(Note here that "gakusei" is a Japanese word meaning "student," I am using it in my credentials to ensure that my credentials and permissions are not affected by other credentials named "student" set at upper levels and used by some live users of the site, as we do not have a segregated development environment. It is our lowest level of access beyond mere Authenticated@..., designed to give students access to download and "surf to" Divisions and Courses.)
*LOGIN: ISSUING CREDENTIALS:*
The login portal code works successfully, and so when a student "Jane Doe" logs in, she is in fact given appropriate credentials (as she is actually registered for CLCV 115 here at UIUC). From the code generating her login URL, I see:
Issued credentials:
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV:CLCV115:CLCV1 15All-13564
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT:STAT100:STAT1 00X1-13570
(You can see she is also registered for STAT 100).
With the default login URL thus generated, she is taken to the top level of the Site in iTunes, and in fact sees thumbnail links for both STAT (Statistics) and CLCV (Classical Civilizations). Clicking on STAT takes her to the STAT Division where she can then enter the Course STAT 100 with no problems.
*PROBLEM: CAN'T GET TO CLCV FROM THE MAIN PAGE IN THE GUI*
HOWEVER! Clicking on CLCV brings up the login page. If she ignores the login page, she can still access the rest of the site, including STAT, just fine. Logging in again (reissuing her credentials) does not help the situation.
Note that this is not a problem only for Jane Doe, the same thing happens for anyone in CLCV and in fact happens for me as Administrator of the whole site with full access, even.
*ACCESS DIRECTLY TO THE DIVISION BY URL WORKS*
With a slight modification to the login to allow access directly to the RobotCourses:CLCV Division (by adding the handle of the Division to the end of the location), credentials are issued exactly as before:
Issued credentials:
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV:CLCV115:CLCV1 15All-13564
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT
gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT:STAT100:STAT1 00X1-13570
and she is taken to the Division page, SUCCESSFULLY. So, it seems she actually HAS access, as expected.
*ACCESS CONFIRMED WITH DEBUGGING:*
Writing some code to generate not the actual login URL but rather a link that takes me to an "iTunes U Access Debugging" page for the Division (figured this out by reading some other posts! :)) I am taken to a page with the following:
(at generated URL https://deimos.apple.com/WebObjects/Core.woa/Browse/illinois.edu.1945806043/xxx5 64?credentials=....)
Received
Destination illinois.edu.1945806043
Identity "Jane X Doe" <[email protected]> (jxdoe) [xxxxxxxxx]
Credentials gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV; gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV:CLCV115:CLCV1 15All-13564; gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT; gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT:STAT100:STAT1 00X1-13570
Time 1236877947
Signature 42ccef92a3298684a7a09eed45adb6b788a700c01645b8b423d33ace120650b0
Analysis
The destination string is valid and the corresponding destination item was found.
The identity string is valid and provides the following information:
Display Name Jane X Doe
Email Address [email protected]
Username jxdoe
User Identifier xxxxxxxxx
The credential string is valid and contains the following 4 recognized credentials:
1. gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV
2. gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:CLCV:CLCV115:CLCV1 15All-13564
3. gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT
4. gakusei@urn:mace:itunesu.com:sites:illinois.edu:RobotCourses:STAT:STAT100:STAT1 00X1-13570
The time string is valid and corresponds to 2009-03-12 17:12:27Z.
The signature string is valid.
Access
Because the received signature and time were valid, the received identity and credentials were accepted by iTunes U.
In addition, the following 2 credentials were automatically added by iTunes U:
1. All@urn:mace:itunesu.com:sites:illinois.edu
2. Authenticated@urn:mace:itunesu.com:sites:illinois.edu
With these credentials, you have browsing and downloading access to the requested destination.
(In case you think to check the sums, be aware I've actually changed the student's name for this example.)
So, as expected, I have access, in fact the student DOES have access, visiting the Division page directly (specifiying its handle as part of the desired location).
*IT'S ONLY CLICKING THE THUMBNAIL ON THE MAIN PAGE THAT BREAKS*
Because the problem is only apparent when clicking the icon for the Division on the main Site page, I have no way (that I know of) to get any information about precisely WHAT is going on, what possibly differs in the GUI-click situation from the "generate me a URL that takes me right there" situation.
At that point I'm fully in the GUI, I'm not sending anything via web services, so I have no idea how I can proceed to debug this from here.
I'm also quite confused at the sudden appearance of this behavior, and the disappearance of this behavior from RobotCourses:PYSC, another Division that was broken in this same way all last week but which magically resumed allowing me access yesterday.
Any suggestions, hints, or advice would be very welcome. Has anyone else even seen behavior similar to this?
Thanks for any information you might have.

Maiko,
I'm confess I'm still trying to get a handle on your problem. You do a fantastic job of describing it ... but I'm just trying to picture it accurately in my head.
I think, were I in your shoes, I'd begin by looking at what the debug page has to say for the specific destination in which you're interested in fixing. In other words, I'm not clear on where, exactly, this destination points ...
Destination illinois.edu.1945806043
Is that your site, or the division within your site that you want to fix? "Normally", you do not need to specify a site handle to get to your site within your transfer CGI ... if you say "uillinois.edu", it's enough to transfer your users to iTunes U ... but every site still has a handle, and you could, if you wanted to, actually specify it in your transfer CGI. For example, this:
Destination uic.edu.1139051993
is for my entire site ... it's my site handle. Whereas this:
Destination uic.edu.1991288441
is for a division within my site ... but it's impossible to tell the difference between "site" and "division" from just the handle (I mean, if I didn't say "this is a site" and "this is a division", there'd be no way for you to know). So when I look at your creds and permissions on your debug page, I can't quite tell if they give you download access for your site, or for the specific division you want to fix. If you could open the debug page with your division as destination (or confirm that that's what we're looking at), it'd rule out some things.

Unable to enter value in editable field of ALV (set_current_cell_via_id)

In the Editable screen of ALV, I have to set the cursor on the 3rd field 'VBELN' ( which is editable ).
Using the method set_current_cell_via_id of ALV grid the focus has been set on the particular field. The field Sales order 'VBELN' is already set as editable (EDIT = 'X').
But still I am unable to enter values unless and until I click anywhere on the screen.
Please help me with the solution.
Thanks in Advance.

No...Whenever my screen is called, the focus is set on the 'VBELN' field but I can not enter the value.
See the code below:
Display the ALV report.
      CALL METHOD grf_alv_popup->set_table_for_first_display
        EXPORTING
          is_layout                     = gs_layout
          it_toolbar_excluding          = gt_exclude
        CHANGING
          it_outtab                     = fp_output[]
          it_fieldcatalog               = gt_fieldcat_popup
        EXCEPTIONS
          invalid_parameter_combination = 1
          program_error                 = 2
          too_many_lines                = 3
          OTHERS                        = 4.
      IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
ls_row-row_id = 1.
ls_col-fieldname = 'VBELN'.
      CALL METHOD grf_alv_popup->set_current_cell_via_id
        EXPORTING
          is_column_id = ls_col
          is_row_no    = ls_row.
With the method set_current_cell_via_id, the field VBELN displays as highlighted but to enter the value I need to click on the screen first.

Cannot find duplexing for HP Envy 110 on Mac OS 10.6

Hi,
So I just purchased the HP Envy 110 D411a printer mainly for the convenience of its automated double-sided printing feature. However, that functionality doesn't work. I went under my system preferences on my Mac OSX 10.6 and followed the directions; under the "driver tab" there should be a box that I can select for duplexing, yet that option does not appear. Why is that?

Hi,
The Two-Sided option should not appear within the driver settings, as the specific model contain internal duplexing module and therefore enabled by default.
Please follow the steps below and let me know if that helps:
1. From the application used to print, click the File menu, and then select Print. The Print window appears.
NOTE: The Print window might be minimized. Click the blue triangle next to the printer name to see all available settings.
2. In the expanded Print window you will find next to Copies the checkbox for Two-Sided. Check the box.
NOTE: If the checkbox does not appear within the specific application print dialog, skip this step.
3. To select the binding type click the lowest selection box listed as the name of the program (e.g. TextEdit)
Will appear as Copies & Pages within Microsoft Office applications.
4. Select Layout from the drop-down menu.
5. Set the Two-Sided option as Long-Edge binding (Portrait), or Short-Edge binding (landscape).
You may save the settings for future use by clicking Presets > Save Current Settings as Preset...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Unable to enter keystrokes on envy 110 keyboard.

Similar Messages

Maybe you are looking for