Unable to erase disc and other problems

My mac died on me and I'm trying to restore. After trying a few things I've erased my partition, leaving boot camp alive and well. If I try and restore, most backups say 'unable to erase disc' or 'error'. One version restores some but gives me a list of things it can't recover and tells me to try another backup.
If it reboots after a failed attempt it can't see either partition. Not even disc utility finds them. I have to turn off and on again to see the partitions.
I have checked the disc using disk utility and repair and verify both say the disc is fine.
1) Can I get the restore feature to not erase the partition before it restores? I can prep the disk using disk utility if I can.
2) What else is causing the problem?
I've tried the last five or six backups so far. I've not yet had time to try the one that half-worked twice, to see whether a second attempt would work or whether it might also come up with an error (which may in turn suggest that it's the prepping of the disc that could cause this).
Any tips greatly appreciated.

Problem sort of solved - iLife'11 appears to have caused the problem and I had to use an even earlier backup to restore the Macbook Pro.

Similar Messages

Hi guys, I hope you help me.. I have no wifi and want to go back from mavericks to lion but erase disc and now can't access disc utility because internet recovery is poping out? what shall i do?

Hi guys, I hope you help me.. I have no wifi and want to go back from mavericks to lion but erase disc and now can't access disc utility because internet recovery is poping out? what shall i do?

Problem is that my wifi does not work.. im using usb dongle.. My screen was broken and i replace it with 2010 model which suppose to be compatibile with my 2011. Is there a way I can access utility disc and not going itno internet recovery mode?
Thanks!

Project is unreadable or too new and other problems - battery problem?

For the third time in the last two months, my FCP project has failed to open with the error: This project is unreadable or may be too new for this version of Final Cut. (Previously I was lucky in that my autosaved versions opened, but no on this time.)
The program also unexpectedly quits every fairly often, lately for example, upon closing a project, instead the entire application "unexpectedly quit".
Also, over the past couple of days, once or twice upon startup, it has given me the error: Your computer's clock is set to a date before march 24th 2001.
Are all of these problems related? Do I have bad RAM? Or a dying battery? Would that cause me to have these problems?
I'm running 10.4.9 and FCP 5.1.4 on my G5 Dual 2.3GHz PowerPC G5 with 2.5GB of DDR2 SDRAM. I have already repaired the permissions, deleted preferences and render files. None of my external hard drives have less than 10% free space and my startup drive has nearly 50% free. I am afraid to keep working in FCP because I'm never sure if the project will open up or not the next time.
Also I am currently living in Shanghai where it is 15 hours ahead of California and where it is also really tough to get good Apple support. Any help would be greatly appreciated!

Jim, Thanks for your advice. I restarted using the install discs and tried to repair the disc using Disc Utility First Aid but unfortunately it stopped repairing:
Verify and Repair disk "Macintosh HD"
Checking HFS Plus volume.
Checking Extents Overflow file.
Checing Catalog file.
Invalid extent entry
Volume check failed.
error: The underlying task reported failure on exit.
1 HFS volume checked
1 volume could not be repaired because of an error
Does this mean I have to use Disc Warrior or Tech Tools Pro? If so, which is better?
Also I searched for the Hardware Test disc in my original discs, but all I found was the Install Disc 1 and 2. Going to change the battery next but would still like to test my RAM...

Mac suddenly very slow and other problems

Since a few days ago I've been experiencing the following problems:
+ VERY long startup time (more than four minutes vs. about a minute previously).
+ When starting an application, the system frequently hangs for a few seconds. (While it's hanging, sometimes the process is marked "doesn't react" in Activity Monitor).
+ Everything feels much slower and less responsive than it used to be and I'm frequently getting the spinning pinwheel.
+ Parallels doesn't start any more. After double-clicking the Parallels desktop icon, the icon jumps up and down in the dock for a little while and then just disappears.
The problem may or may not be related to the removal of my Bootcamp partition, which I did shortly before the problems started to occur. I don't remember if the problems started immediately after the removal of the Bootcamp partition but I think it's likely that there is a connection.
I did lots of things to find the cause and solve the problem, to no avail:
+ Made sure that after the Bootcamp removal the Mac HD is selected as the start volume.
+ Checked the HD using Disc Utility (no errors found)
+ Repaired permissions using Disc Utility
+ Created a new user account (problem persisted)
+ Cleared system caches
+ Ran various checks using Onyx (no problems found)
+ Deleted PRAM by starting up and pressing ALT-CMD-R-P
+ Checked for viruses (no viruses found)
+ Unplugged all USB devices
+ Reinstalled OS X ("archive and install")
None of this helped.
Observations:
+ I tried to start in safe mode but that made the startup procedure even slower, I was seeing the Apple logo and the grey spinning wheel for almost 10 minutes alone.
+ According to Activity Monitor there's always lots of free memory and CPU power.
I'm really clueless as to what else I could do other than wiping the HD and reinstalling everything from scratch or sending the machine back to Apple. Any ideas would be *very much appreciated*!

Hard to believe, the problem is back!
Everything worked just fine last night. This morning I turn the iMac on and the problems are back: Extremely long time to startup, application hangs, everything super slow.
Any ideas?
I restarted in verbose mode and took some pictures, in case that helps...
http://gallery.me.com/cjanz#100008

Overheating? and other problems

Hello,
First of all, here are my specs:
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.5 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP41.00C1.B03
SMC Version (system): 1.27f2
Sudden Motion Sensor:
State: Enabled
System Software Overview:
System Version: Mac OS X 10.5.7 (9J61)
Kernel Version: Darwin 9.7.0
Boot Volume: Macintosh HD
Boot Mode: Normal
I also run a student version of 32 bit Windows XP on Boot Camp and sometimes on Fusion.
Okay, now for the problems.
1) The clock on my computer is wrong every time I boot up. It eventually corrects itself, but it takes quite a while. I don't really have any idea what would cause that.
2) The more important issue is that any time I use Hypershot or any other 3D program for more than 15 minutes, the fans get extremely loud and the bottom of the laptop gets extremely hot. I specifically bought this computer because the hardware is supposed to be able to handle 3D modeling software.
My thoughts on the problems are this: would a simple cooling pad alleviate my issue with Hypershot?
Is AppleCare highly recommended? Or is there anything similar that is free to use that I might use as a diagnostic to make sure my system is running properly?
Would reformatting help anything?
Basically I'm just looking for a starting point to troubleshoot exactly what's going wrong. Thanks for any help/advice you might be able to offer.

Welcome to Apple Discussions!
I too have no idea what is going on with your clock, but there are some things you can do to check out your computer to be sure all is well with it.
First of all, open Disk Utility and verify your disk and check that the S.M.A.R.T. status is verified. If "Verify Disk" indicates that the disk needs repair, then boot from your install disc and navigate to Disk Utility and repair the disk.
Also, you can check with iStatPro to see that both fans are on and operating properly.
You can also run the extended version of the Apple Hardware Test to check for hardware problems. The AHT is on Install Disc #1 of the gray discs that originally came with your computer. You boot to it by holding down "D" as you start up.
I don't run any 3D stuff myself, but I assume that it is processor intensive. If so, the heat and fan speed might be exactly what you would expect. You do need to have the Mac on a hard surface so the air can circulate freely around it. It might help to try a chill mat or even some spacers under the feet to allow for more air circulation.
You can also use Activity Monitor to monitor your CPU usage. It may help to close any unneeded applications when doing 3D.
These are just some general things to get you started and to find or rule out any obvious problems. Hopefully someone who also runs Hypershot will see this thread and can compare specific temperatures and fan speeds and determine if what you are seeing is normal or not.
In my opinion, Applecare is well worth having, as almost any repair would be far more expensive than the cost of Applecare. It may also be worth checking with your homeowner's insurance agent to see about coverage for accidental damage or theft, which Applecare does not cover.
Good luck!

Keyboard and Other Problems

For a awhile now, a few of my keys have stopped working: F1 and F2, and F5 - F12. Also, the power button on the keyboard will not work either. I'm not able to adjust the brightness of my keyboard or the screen, and I can't adjust the volume using the keys.
If I try to shut my computer down by using the apple button on the menu bar at the top of the screen, that will not work either, so I can't log out, shut down, or restart my computer.
Photo Booth stopped working also. I wil go to take a picture and it does the " 3 2 1" countdown but after that it will just freeze. I don't know if that has to do with any the other problems, but 'm still able to skype with my webcam, so it's just Photo Booth.
I'm not sure if there's any way to fix this myself, but maybe if there's a way to restart my computer some of the problems could be fixed.

I am having the same issue and I believe it started after the last update. It is definately not the keyboard because in programs like word or excel the fn F5, for example, still brings up the find function. I think it is an issue with the keyboard setting but when I go to preferences it opens the Keyboard Shortcuts tab. When I click on the Keyboard tab I get the color wheel and I have to force quit. I am also unable to open the Mac Info from the apple menu in finder. And I am unable to manually shut down or restart from the pull down menu. I think it was a faulty upgrade but I don't know how to fix it.

Oracle 8.1.5 install on Linux Redhat 6.0: character set (and other) problem(s)

I am trying to install Oracle 8i on Linux and it does not work : once the install is finished, I have a message saying that "Character Set not found".
I am runing a french version of Linux (fr-latin 1) and I try to install Oracle with French and English as languages
An other problem about this install : Oracle does not seem to recognize that I have 6,9 Giga for it to install, and says that I have not enough space for the install...
And at the end of the install, it takes for ages (about 15mns) during which nothing seems to happen. On one machine I got out of this phase, but on the other I never saw it finish, it looks as if the computer crashed. Is that normal?
I went through all the initialization phases, set the correct environment variables...
thanks
Solange
null

I've been dealing with the same problems in the english version but could bypass thiss by doing the folowing.
-Just ignore the disk space stuff
-Ignore the charset message, also
-When creating a database, choose custom and then select the WE8ISO8859P1 char set. It worked for portuguese, must work for french also.
-Everyone here recommended, and I do the same, leave the database creation for later, not during instalation.
Good Luck!

Crashes, sound loss, and other problems

Hello,
I have been having some serious problems over the past several months. In the past it was fairly manageable, but recently things have been getting worse.
I have a 12-inch PowerBook G4, I bought it at the McGill bookstore in October 2004. The first problem was the apparently random crashes that Mac OS X (v.10.4.8) would experience from time to time. It was fairly infrequent at first so it didn't bother me too much (and I thought it was just some sort of glitch). But it persisted and came to be expected.
What would happen is that my screen would darken and center box would appear telling me, "You need to restart your computer. Hold down the Power button for several seconds or press the Restart button." (it would display this message in English, French, German, and Japanese for my convenience). After I restart the computer I get the message, "The computer was restarted after Mac OS X quit unexpectedly". At first it seemed to be linked to time; after a while it would just crash, sometimes after an hour or so, sometimes after as little as five minutes. (I fear as I write this that I will have to start over). More recently I've come to associate the crashes with movement of the computer; perhaps the battery (which is pretty much dead after so much use) is affecting the performance, I don't know.
The next problem, which coincided with the crashes, was my clock being reset. I assumed this was directly associated with the spontaneous shutdown of the computer, yet though the crashes continued, the clock was not always reset (just about a third of the time). This was a pretty frustrating inconvenience given the frequency of the crashes at the beginning.
The major problem that prompted me to take action was the lose of sound. One day, about a month ago now, my sound suddenly stopped working. At first I thought it was a hardware problem, but then I noticed the sound was still working with some things and just not others. For example, the sound increase/decrease indicator (the 'pop' sound when turning up or down the sound) stopped working, yet the startup sound still worked. I've found that Realplayer, MPlayer X 2, and Windows Media Player work fine but iTunes, VLC, and Quicktime don't. Most of the applications simply don't make sound but when I try to video in VLC I get the following error: "auhal: we cannot find our HAL component" or "auhal: audio-device var does not exist. device probe failed."
Other minor errors I have come across include inability to detect the Airport card (remedied upon restarting the computer) and occasional seizing up of the keyboard (the letter keys, exclusively, were unresponsive for sometime before working again suddenly without need of restart).
I've run diagnostic tools such as Disk Utility and the 'fsck' command in single-user mode, but nothing has been detected. It consistently comes up saying that everything is alright.
I have backed-up all important files and programs (with the exception of my Firefox bookmarks, do you know how I can save those?) and am prepared to do whatever it takes to bring my computer back to working order. I need my computer for schoolwork and assignments so if I can fix it myself in anyway... I would prefer to avoid lengthly repairs if possible.
Please let me know what my options are, and/or possible things I can do to repair these problems. This whole affair is, unsurprisingly, driving me crazy.
One last thing, upon launching Microsoft Word, I get the following pop-up:
Application Launch Failure
The application "Word" could not be launched because of a shared library error: "3<Microsoft Word><Microsoft Word><MicrosoftLSLibZ>"
I do not know whether this is linked to my other problems or not. This too, is something that has recently come up and is significantly affecting my work (I have had to switch to writing my essays on TextEdit).
Any help is greatly appreciated.
Thank you,
Eric Oosenbrug
PowerBook G4 Mac OS X (10.4.8)

try shutting down, remove the battery, carefully pull out AirPort card and reinstall it.
maybe run hardware test included with CD kit

Ios 5.0.1 crashing, slow and other problems

I am using an iPhone 4 running 5.0.1 and Im just fed up with it, as much as I loved the iPhone in the past Im afraid I have fallen out of love and I'm conteplating a breakup.
Problems I have had with the version 5.*.* update:
* Safari and the built in youtube app crash at least twice daily and other apps, most notably accuweather and Facebook also crash on a daily basis
* Pages/windows don't load properly, an example of this is the texting app, I open the app and select a converstation, the "messages" button, name and "edit" buttons apear at the top but the area that would disply the text conversation never changes to show the accutual text messages and only pressing the home button and reentering the messages app will fix this.
* I have had text messages compleatly disapear if I recive one while acitivly using the phone, mostly by pressing the home button or preforming other input at the same exact time I recive a text message. I get the popup notification dispalying the text of the message in the notifaction but when I go to reply to the message It is gone, like it never existed.
* Simply navagating the phone such as menus, back buttons, or loading apps is slow. I can out type the keyboard and in general the phone is becoming more and more usless. As an example, wakeing the phone with the home button takes upto a full two seconds for the unlock screen to open, then another full second for the phone to "think" before it unlocks. This is increadibly slow compaired to the previous versions, and much slower than my old iPhone 1 and my non-updated iPhone 3Gs
* I use to have a problem where the purple arrow indicated the phone was using location services about 50% of the time and it was the setting time zone feature. I disabled location services for this feature and it fixed the problem. I did not notice an abnormal battery drain with this problem.
* The keyboard will not hide and/or display at approprate times requireing me to restart the app.
* Notication sounds, mostly incoming SMS sounds dont play at approprate times or play twice a few seconds apart for the same incoming message
* Autocorrect is too easily learning misspelled words leading me to reset the keyboard dictionary too frequently
* Incoming email and SMS messages cause the phone to loudly vibrate while talking on the phone, this is a new problem with ios5. I use to be proud of the iphone for not doing this becasue I talk to people with androids and found the vibration noise very annoying while on the receving end.
My phone is rather clean and I have very few third party apps installed. I use the facebook app, a weather app, and only a few other apps. My storage memory is about half full and thats almost entirly music.
I regualry power cycle and restart my phone, I would say at least once a day.
I have tried to fix the phone by disableing and enableing anything I can find from notifications, location services and icloud and nothing has helped.
I have also tried rebilding the phone, both from a backup, and restored as new. I have taken the phone to an apple store and had them restore it as well, they claim to be able to restore "deeper" than what I can do at home, I assume this is similar to flashing the firmware and not just the software. Doing any kind of restore does seem to help with the speed problem for about 2 days as it slowly gets worse and returns to its ever slow and defective operation.
I have not noticed any problems with my ipad v1 running ios 5.0.1
Two of my freinds complain about a similar experience with ios 5 on the iphone
Does anyone have similar problems or an idea for a fix?
Message was edited by: AtomicFlx
Message was edited by: AtomicFlx

Here's and update on my problems and here are are some screen shots of the types of problems I've been having since the v5.0.1 update. Keep in mind these are native apps and I have tried the rebuild phone crap many times, nothing helps.
This is screen shot of a what happened when I tried to use my camera one day, both the front and back cameras were all black. I had to power cycle the phone to get rid of this problem. The cameras appeared to be working correctly, I could focus and zoom but it was all black.
Here is an image of what happened when I searched for something in a map. This is after I picked the choice I wanted, the keyboard disappeared but the list didn't. I had to force close the app and restart it for this problem to go away. Who knew five bars on ATT was possible.
And finally this is the messaging app, although you would not know it. I had to return to home screen (after a long pause for it to process the button push) and return to the messaging app. This happens all the time with the messaging app and the notifications sounds drive me crazy. If i'm using the phone, say browsing the web and I get an incoming message its almost 100% of the time the messaging app will screw up. The sound will play at the wrong time or not at all, message will show up in notifications and diasapear in message app or Ill have a problem like this:

No Battery Charge and Other Problems After OS3 Install - Solution?

This relates ONLY to iPhone Users using the "PUSH" Function for Email or Other Apps!
PROBLEM: It seems as though Apple is at least aware of the problem(s), i.e. once Exchange Email or another App using PUSH is configured, there is an OS3 bug that seems to be hardware independent (impacting ALL 1G, 2G and GS iPhones, but not consistently).
SYMPTOMS: Include some or all of the following . . . rapid discharge (less than two hours from a fully charged phone, failure to charge (by AC adapter or USB to computer), failure to charge completely, perpetual dead battery icon, inability to boot, inability to automatically sleep, quite warm on upper back side, slow email, indication of a full or partially full charge dropping to no charge or dead when removed from charging source.
CAUSE: OS3 Bug prevents consistent charging, draining the battery even when plugged in to a computer via the USB or into an A/C adapter (although I've been able to intermittently charge on an A/C adapter). In push mode, the Exchange email client on the iPhone continually queries the Exchange Server, cycling the iPhone CPU and continually draining the battery at a high rate (can
WHAT I'VE BEEN TOLD BY APPLE:
1) Defective Hardware (though I'm on my third 3G in a week, so I don't think hardware is the problem . . . Apple will consider replacement with a new 3G if my third 3G has the same problem)
2) Corrupted App in iTunes - so I manually reloaded each app directly over wi-fi, one app at a time, this worked until I configured Exchange Email, at which time symptoms immediately appeared . . . so corrupted app unlikely.
3) Initial data transfer after email configuration . . . but symptoms continued long after this.
4) Wi-Fi - but turning wi-fi on or off had little effect, beyond normal.
5) Restore to New Phone - this works fine UNTIL Exchange Email is configured and activated. Thus, the time consuming practice of reload all apps, photos, music, etc. will be for naught, once exchange email is turned on with "push"
SOLUTION: Turning off "push" on your exchange email account
1) Go to Settings - Mail, Contacts, Calendars - Fetch New Data
2) Set Fetch Setting to 15 minutes to approximate the much more frequent "push" uploads and downloads. NOTE: Turning off \"push\" at this level will NOT turn off push on your exchange email account and the problem will not be resolved
3) Scroll down and select - Advanced -
4) Identify and select your Exchange Server account
5) Select - Fetch -
6) Leave settings
Phone should cool down in a few minutes and work normally. The problem can be replicated and resolved repeatedly merely by toggling "push" on and off in your exchange email configuration.
I was told that this is likely to be the "fix" until a patch is issued. No time frame was given for an actual fix that allows Exchange users to use push technology. Disappointing, since broader use of "push" technology beyond exchange was one of the big benefits of OS 3.0.
NOTE: THIS PROBLEM DOES NOT OCCUR ON ALL iPHONES WITH OS3 USING THE EXCHANGE CLIENT. I have second 3G phone, identically configured (including push to exchange email) that has no symptoms at all. Go figure.

Since two days ago, my battery indicator has been indicating 100% until the phone dies, which seems to be one of the symptoms you're describing.
However, I don't use Push emails; my email client is configured to poll an imap server and has been that way since I got my phone over 6 months ago. To be on the safe side, I turned off Push anyway, but I'm still having the problem. Definitely 3.0 related as I've never had this problem before.
Perhaps it's linked to an app? Personally I don't have a whole lot of them installed: Aurora Feint, fstream, twitterific, flixster, wikipanion, google earth, urbanspoon, STM Mobile, iDicto, Air Sharing, Facebook and Apple Remote. I've removed a few and will see how it goes.

HT4623 Sound and other problems with Ipad 3 after ios 6.1.3 update

I purchased Ipad 3 last year and got problem of losing sound when I restored the Ipad throgh itunes. The sound came back automatically after I charged the device to 100%. Recently I got the same problem when the operating system was Ios 6.1.2 and then i got updated it to ios 6.1.3. The problem has not been solved while has been added up. Now the Ipad operation is slow, its either freezes and crashes frequently. Once it gets in sleep mode then it does not come back untill i press power button and home button togehter for sometime. I have checked all settings like mute and have restored the ios multiple times on two separate PCs but the problem is still there. Please help me what i need to do next.

Try a reboot of your ipad. Hold the Sleep/Wake button and Home button simulataneously. Keep holding, ignoring the red slider, until the Apple logo appears. Release the buttons and let the ipad restart. A reboot often fixes numerous problems.
Also are you aware that by suncing with a different computer it is likely the personal stuff you had on your ipad from your imac will be removed?
The ipad is designed to sync with only one device.

Brutalizing my Hard Drive... and other problems

I just got an iBook G4 a month ago, and I am first trying to edit a movie now. I can't buy Final Cut pro, and I don't feel like I should have to based on the kind of movies I would like to make. But I have the following problems:
1) I would like to be able to import video at a lower resolution or something that would make my project take up less space... my internal HD is only 40GB and my external is 80, and small amounts of video take up huge amounts of space. And as someone noted, trashing these clips seems to do nothing. Which is very frustrating. I do not see the reason for "non-destructive" editing.
2) I don't know how to make the project originate on an External HD. Is this because it is USB? On my old (windows) computer I could use USB to import from the camera at a lower resolution, and now with only the firewire option and apparently no way to downgrade how much space the file takes up, putting it on the external drive would be a great help.
3) I have used final cut, and it actually seemed easier to do things such as trim the length of a clip at either end, slow it down, speed it up, reverse it, and more. I do not see any intuitive options to do these things (other than awkwardly clicking on the ends of the clip in the timeline to shorten it... but why can't I work with the clip alone?) , and I feel stupid. But the help option has nothing on it either. iMovie must have these capabilities, yes?
I am sorry for the long post, but I am frustrated. I find this to be the opposite of GarageBand, which was so intuitive I could mave music even though I had no goal in mind. I know exactly how I would like my simple movie to go, and I feel that the software is standing in the way. Would iMovie 4 be better? How do I downgrade?
Thanks.

David B.
I'm presently working on a wedding video, to go onto a DVD ..a bit more than 20 mins! ..And also on a video of some people doing Qi Gong (Chi Gung ..however you pronounce it ..you know: slow-moving oriental exercises) and both of those DVDs will need Chapters ..guests arriving; wedding ceremony; reception; speeches; dancing; people falling over and being ill ..we-e-ell; you know.. and the other has Chapters for each of the different exercises (..twisting left and hurting your back, touching your toes and getting cramps, swinging arms above head and smashing the lampshade, etc).
So I often make movies ..and DVDs.. which are longer than 20 mins ..though the last one was only 9mins or so, but that was a copy of some old VHS tape from 20 years ago for a cousin who's getting married next(?) week.
Chapters let you jump (..forward or back..) to a particular element of the video/DVD which you want to play again, without having to negotiate menus.
And other videos - of the eclipse, etc - often last 35 mins or more.
Over the years I recorded (..or shot on 8mm!..) a bit of what was happening with friends in Cornwall almost every time I visited them. This now amounts to 3hrs worth or so. Put onto a DVD - or two! - they can jump between chapters to see their daughter the day she was born; then the same girl aged three; then the same girl getting married, etc!
So I make long-ish video with iMovie, add Chapters for ease of navigation, then burn onto long-ish DVDs.

Problems with stuck/dead pixels, battery life, ICS, and other problems

Stuck/Dead Pixels:
I bought my Droid Razr at around the 21st of December last year. On or around Christmas, I found a bright red pixel on the very bottom of my screen. Unlucky for me, I was leaving for Florida on Christmas Night. I got back on December 31st. Sometime in the first week of this year, I visited my verizon store and told the customer service lady that I had a dead pixel on my screen and had just bought it. But, she told me that she needed the manager to fix this and there was no manager there. For the next week I was busy with school and sports etc and was not able to go back to the store. It was now past my 14 day return period. So I decided, its only one pixel, most people won't notice it anyway. So here I am 5 months later, just starting to discover more pixels dying on my screen. I now have the one bright red one, two light blue ones, and one dark red. I have no idea what the return policy is on defective phones, and the verizon site is designed so that you can't find anything. And an FYI, I have tried stuck pixel removers and other apps, which haven't been successful.
Battery Life:
I have also been finding more problems with my phone. The battery life is terrible when 4G and even 3G are on. I actually see no difference in battery consumption between 3G/4G. My battery dies about 4-5X faster when data is turned on, compared to using no data. I know it isn't because of the apps I installed since when I use WiFi, the battery is alright. I also make sure that my RAM isn't above 400MB, so that the processor doesn't use a lot of battery. I feel like I completely wasted my money buying the Razr. Mainly because of the fact that the Razr Maxx was announced two weeks later, which has about 80% more battery. Not only this, but I've seen the Razr selling for only ONE PENNY on amazon over the past month and it still is. I payed $300 on my Razr.
Ice Cream Sandwich:
After these major problems comes another one, that I bet all Razr and Razr Maxx customers are still thinking about. When will I get Ice Cream Sandwich? It is very disappointing when you are told that you will be getting an upgrade in early 2012, and are still wondering where your upgrade is 5 full months in. From what I understand, we won't see an upgrade until the end of June, since Motorola has posted on their website that "rollouts" would begin in the second quarter. Even if they release it by the end of June, when will it get to your phone? Maybe another week or two for some people. This is another thing that I feel I wasted my money on. My brother told me to get the Nexus because of ICS, but I trusted Motorola that they would upgrade my phone in a timely manner. WRONG.
Phone Freezing:
One more problem that I've had is that the phone will freeze. Usually you only need to turn the screen off and on, but once in a while, you have to completely reboot your phone. When I was coming back from Florida, right as I was about to get home, my phone completely froze. I was about to go return it, but after about 15-20 minutes, it became unfrozen.
Motion Sensor not functioning:
Another problem, an annoying one, is that sometimes the motion sensor that controls portrait and landscape mode will just stop working. Some of the games I play are completely dependent on the motion sensor. It is very embarrassing when you are trying to show off to an iPhone friend and major components of your phone aren't working. They always tell me "why didn't you get an iPhone?". And I really just wanted to have a phone that didn't look like everyone else's, but I guess that comes at a cost. When the motion sensor stops working, I have to shut down my phone and restart, which takes a couple minutes.
Problems with camera:
My last problem would be with the camera. Sometimes if you bring the camera close to something, like a barcode, it will keep trying to focus, but never will. Another problem is photo quality in low light situations. It seems like the camera can't focus because it goes from being very dark into being bright because of the flash. I doubt this can be fixed because it's hardware, but a potential fix could be having the option to keep the LED light on during picture mode, that way the camera will be able to focus correctly.
In Conclusion:
I really just want someone to tell me how to return my phone for a new one, due to the dead pixels. I also wish I could be upgraded to the Razr Maxx because of the poor battery life on the Razr, but from what other people are saying, that probably won't happen. And finally, if anyone has more info about Ice Cream Sandwich, that would be awesome.

Well since it's a Manufacturing Error it should Fall under your Warranty if you got one with your Razr. You know you can Call C.S. an they can Assist you with the Matter on it.. Just remember to have another phone so they can Trouble shoot the One that is Experiencing the Issue an when you talk to them go over thing. An they should send you C.G.A.N unless they request you to send it in before you get anther one. If you feel Better going to the Store try that. And Good Luck..

After upgrading to Lion 10.7.1 - iPhoto and other programs slow to open and other problems

Am I alone - having lots of problems with 10.7.1. iPhoto is slow and when I export photos it exists iphoto then I restart and sometimes it will works. Safari is slower also. Sometimes it justs hangs and I have to force quit. iTunes is also slower to open. Almost everytime it goes to a checking library for a long time.
Should I go back to previous version? Will I lose my purchase. I do not have disks for the upgrade. I do not want to go back - I have a lot of data and always fear of losing it.
Think Apple knows about the problems or am I the only one and have some other problem?

olegz,
First, thanks for the clear graphics.
Authorization seems to be the hangup here. But instead of dealing with the complications of conflicts in authorization, which might take several weeks to months to iron out - site by site - I urge you to follow a different path.
It looks like you're using Chrome. For this site alone, use either Safari or Firefox, both of which are more likely to have plugins to deal with authorizing your site. Safari is already on your computer, but v.3 of Firefox is stable, too. Frankly, I can't tell you what specifically might be the problem here; but switching browsers will solve the immediate problem.
Sound good? Not so good? Post in this thread so that I or others can solve your problem once and for all!

Tracks out of order and other problems

For one of my albums, the tracks are all out of order. I have edited the information, and the track numbers are proper, but it will not order them correctly. I have even removed the files from Itunes and then added them again--still they do not go in order. Then when I move the files onto my Ipod they are out of order, and it's very annoying. If Itunes won't recognize the track numbers, how do I reorganize them?
My other problem is manly with the Ipod. I'm not entirely sure what I did to cause this but on my Ipod, an artist is doubled. And yet when I view the songs list on Itunes (the list of my Ipod) there is only one artist. How am I supposed to fix this?
I've tried everything I would know of, and neither problems can fix. Thanks to everyone who replies.
Message was edited by: Zuzanna

ditto on tracks out of order. anyone? please?

Unable to erase disc and other problems

Similar Messages

Maybe you are looking for