Unable to establish a connection to a remote MSSQL Server? How to do it?

I am trying to connect with SQL Server which is running in remote, the error which I am getting is "SQL EXception: Driver Unable to connect
Socket "
I dont know what is the reason for this Error?
Please help me!
And give solution to solve this problem.

In SQL server you can configure it how to communicate with clients (Shared Memory, Named Pipes, TCP/IP).
When the application is on the same computer with SQL server Local Named Pipes or Shared Memory are used.
When is on other computer TCP/IP or Named Pipes are used to communicate with the server.
Check these options and enable the appropriate.

Similar Messages

Ssocfg fails - unable to establish secure connection to OID on port 636

Infrastructure tier on 10g Application Server was installed without the fully qualified hostname. The fix includes running the ssocfg.sh in $<infrastructure_home>/sso/bin. However, when I run the ssocfg.sh script I get an exception saying: "Repository Access API throws exception :oracle.ias.repository.schema.SchemaException: Unable to establish secure connection to Oracle Internet Directory Server ldap://<hostname>:636
When I execute ldapbind on port 636 I get a timed out error.
Any ideas on where to look for a fix?

Please post your problems in more details. What is the error message you are getting?
Please mark the post as solution if it solves your problem.
Current Device - Nokia Lumia 1020/920

"Unable to establish a connection between WebEx and the mail server."

Hi,
I installed Cisco WebEx and integrated with our Microsoft exchange server. It showed server "UP". everything's came up and working fine after that and sudenlly i found this message "Unable to establish a connection with the mail server. Please recheck settings."
I went into the Mail Server setup to edit settings and now, it shows Server Down. Do I need to do something on the MS Exchange 2010 or from webex server ??
Any help is greatly appreciated. Thanks a lot!

Every 180 seconds, CWMS verifies the connection to the SMTP server by establishing a connection on TCP port 25 (SMTP) and then sending the EHLO command followed by the QUIT command. This check is also performed once when logging into the admin web page or when browsing to System -> Servers (where the status of the mail server is displayed).
If this sequence does not complete successfully, the warning “Unable to establish a connection with the mail server. Please recheck settings.” will show in a banner at the top of the CWMS admin pages.
You can verify the connection to the SMTP server manually by using “telnet 25”.
If you have access to the CWMS unix shell be aware that CWMS does not come with the telnet command installed.
As an alternative, you can use this 3-lines script:
exec 3<>/dev/tcp/x.x.x.x/25
echo -e "EHLO\r\nQUIT\r\n " >&3
cat <&3
Replace x.x.x.x by the ip address or hostname of the SMTP server and save the script in a file, f.e.:
/* script saved in a file named ehlo */
[root@dchriste-cwms-adm1 ~]# cat ./ehlo
exec 3<>/dev/tcp/10.48.54.79/25
echo -e "EHLO\r\nQUIT\r\n " >&3
cat <&3
Then, execute it:
[root@dchriste-cwms-adm1 ~]# sh ./ehlo
The output should be similar to this:
220 *******************************************************************************************************************
250-confukdc.confuk.com Hello [10.48.52.110]
250-TURN
250-SIZE
250-ETRN
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-8bitmime
250-BINARYMIME
250-CHUNKING
250-VRFY
250-XXXXXXXXXXXXXXXXXXXXXXXA
250-X-EXPS=LOGIN
250-AUTH GSSAPI NTLM LOGIN
250-AUTH=LOGIN
250-X-LINK2STATE
250-XEXCH50
250 OK221 2.0.0 confukdc.confuk.com Service closing transmission channel
Also, you can use this tcpdump command to see the conversation (replace x.x.x.x by the SMTP server’s IP address or hostname):
tcpdump -vXs 0 host x.x.x.x and tcp port 25
If you have HA, it is not certain which admin VM talks to the smtp server, so best to check both.
If you don't have access to the CWMS unix shell, best to span the switch ports and run packet capture.

BEA-149505 -The administration server was unable to establish JMX Connect.

hello
Getting the following error, trying to access the weblogic admin server ( Linux x86-64 RHL50) after a fresh install.
BEA-149505 The administration server was unable to establish JMX Connectivity with the managedServer at the JMX Service URL of <none > URL in the AdminServer LogiI
1. what steps and configuration files do I need to access to add the url
I will like to add that the node manager and the cluster screen were NOT configured during the configuration, since this is NOT an OIM configuration
2. if you have any tips please let me know
r.

faisal
thank for your feedback. I added this in my startup script, but I was NOT able to get the web access to work and when I shot it down, there was an error.
Here is the startup script, Please show me when to place the scripts
#!/bin/sh
# WARNING: This file is created by the Configuration Wizard.
# Any changes to this script may be lost when adding extensions to this configuration.
# --- Start Functions ---
stopAll()
# We separate the stop commands into a function so we are able to use the trap command in Unix (calling a function) to stop these services
if [ "X${ALREADY_STOPPED}" != "X" ] ; then
exit
fi
# STOP DERBY (only if we started it)
if [ "${DERBY_FLAG}" = "true" ] ; then
echo "Stopping Derby server..."
${WL_HOME}/common/derby/bin/stopNetworkServer.sh >"${DOMAIN_HOME}/derbyShutdown.log" 2>&1
echo "Derby server stopped."
fi
ALREADY_STOPPED="true"
# --- End Functions ---
# This script is used to start WebLogic Server for this domain.
# To create your own start script for your domain, you can initialize the
# environment by calling @USERDOMAINHOME/setDomainEnv.
# setDomainEnv initializes or calls commEnv to initialize the following variables:
# BEA_HOME - The BEA home directory of your WebLogic installation.
# JAVA_HOME - Location of the version of Java used to start WebLogic
# Server.
# JAVA_VENDOR - Vendor of the JVM (i.e. BEA, HP, IBM, Sun, etc.)
# PATH - JDK and WebLogic directories are added to system path.
# WEBLOGIC_CLASSPATH
# - Classpath needed to start WebLogic Server.
# PATCH_CLASSPATH - Classpath used for patches
# PATCH_LIBPATH - Library path used for patches
# PATCH_PATH - Path used for patches
# WEBLOGIC_EXTENSION_DIRS - Extension dirs for WebLogic classpath patch
"/erasdevapp/weblogic/user_projects/domains/base_domain/bin/startWebLogic
umask 037
# Call setDomainEnv here.
DOMAIN_HOME="/erasdevapp/weblogic/user_projects/domains/base_domain"
. ${DOMAIN_HOME}/bin/setDomainEnv.sh $*
SAVE_JAVA_OPTIONS="${JAVA_OPTIONS}"
SAVE_CLASSPATH="${CLASSPATH}"
# Start Derby
DERBY_DEBUG_LEVEL="0"
if [ "${DERBY_FLAG}" = "true" ] ; then
${WL_HOME}/common/derby/bin/startNetworkServer.sh >"${DOMAIN_HOME}/derby.log" 2>&1
fi
JAVA_OPTIONS="${SAVE_JAVA_OPTIONS}"
SAVE_JAVA_OPTIONS=""
CLASSPATH="${SAVE_CLASSPATH}"
SAVE_CLASSPATH=""
trap 'stopAll' 1 2 3 15
if [ "${PRODUCTION_MODE}" = "true" ] ; then
WLS_DISPLAY_MODE="Production"
WLS_DISPLAY_MODE="Production"
else
WLS_DISPLAY_MODE="Development"
fi
if [ "${WLS_USER}" != "" ] ; then
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.management.username=${WLS_USER}"
fi
if [ "${WLS_PW}" != "" ] ; then
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.management.password=${WLS_PW}"
fi
if [ "${MEDREC_WEBLOGIC_CLASSPATH}" != "" ] ; then
if [ "${CLASSPATH}" != "" ] ; then
CLASSPATH="${CLASSPATH}${CLASSPATHSEP}${MEDREC_WEBLOGIC_CLASSPATH}"
else
CLASSPATH="${MEDREC_WEBLOGIC_CLASSPATH}"
fi
fi
echo "."
echo "."
echo "JAVA Memory arguments: ${MEM_ARGS}"
echo "."
echo "WLS Start Mode=${WLS_DISPLAY_MODE}"
echo "."
echo "CLASSPATH=${CLASSPATH}"
echo "."
echo "PATH=${PATH}"
echo "."
echo "***************************************************"
echo "* To start WebLogic Server, use a username and *"
echo "* password assigned to an admin-level user. For *"
echo "* server administration, use the WebLogic Server *"
echo "* console at http://hostname:port/console *"
echo "***************************************************"
# CLASS CACHING
if [ "${CLASS_CACHE}" = "true" ] ; then
echo "Class caching enabled..."
JAVA_OPTIONS="${JAVA_OPTIONS} -Dlaunch.main.class=${SERVER_CLASS} -Dlaunch.class.path="${CLASSPATH}" -Dlaunch.complete=weblogic.store.internal.LockManagerImpl -cp ${WL_HOME}/server/lib/pcl2.jar"
export JAVA_OPTIONS
SERVER_CLASS="com.oracle.classloader.launch.Launcher"
fi
# START WEBLOGIC
echo "starting weblogic with Java version:"
${JAVA_HOME}/bin/java ${JAVA_VM} -version
if [ "${WLS_REDIRECT_LOG}" = "" ] ; then
echo "Starting WLS with line:"
echo "${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${JAVA_OPTIONS} ${PROXY_SETTINGS} ${SERVER_CLASS}"
${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${JAVA_OPTIONS} ${PROXY_SETTINGS} ${SERVER_CLASS}
else
echo "Redirecting output from WLS window to ${WLS_REDIRECT_LOG}"
${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${JAVA_OPTIONS} ${PROXY_SETTINGS} ${SERVER_CLASS} >"${WLS_REDIRECT_LOG}" 2>&1
fi
stopAll
popd
# Exit this script only if we have been told to exit.
if [ "${doExitFlag}" = "true" ] ; then
exit
fi

N70 Unable to establish network connection using p...

. . . but can browse the net using handset alone; PC suite can do other functions but OTA is not able to connect. This happened after I downloaded the latest PC Suite 7. Recommendation of FAQ/Help is to check connections settings (duh) and have cooperated with instructions. Nope, didnt work. Have tried:
Uninstall; install of PC Suite to the letter 5x
Reset phone to factory settings
Use settings wizard to ensure proper internet settings
Was recommended download usb cable driver - link is non existent
Tested using a different N70 unit on my laptop - still no go (now doesnt that mean there is a software issue????)
Most of the help desk tips at the call center are stop gap and rarely meant to go the distance assisting you (like when a blanket fix is recommended - go to service center to have phone software upgraded) or the standard spiel of "we'll put your case on record and we'll call you back in hours" and sometimes they do call back or not. So far in my case none of the tips have worked. I am about to reformat my pc, and if this doesnt work, then what can we say about the problem? Did we get a dud PC Suite, a lemon, a beta version?
How then can I browse the net using my mobile as modem? I guess I am venting my frustrations here - but hey, may I challenge Nokia to find a fix for connectivity issues related to use of a Nokia Phone as a modem? Check out the discussions and you will find similar issues echoed all over. Or is Nokia just waiting for one of us indomitable tinkerers to find a solution and share it in these discussions?

I REFORMATTED MY PC TO SEE IF IT IS A PROBLEM WITH MY LAPTOP SOFTWARE. I AM STILL UNABLE TO ESTABLISH NETWORK CONNECTION USING MY PHONE AS A MODEM. IT SAYS CHECK CONNECTION SETTINGS, BUT HOW FAR CAN YOU GO WITH THAT? THE CONNECTION SETTINGS ARE FINE! I CAN BROWSE THE NET USING THE HANDSET ALONE, SO WHAT GIVES? I CHALLENGE NOKIA TO FIND A SOLUTION TO THIS PROBLEM.

TPINIT error Unable to establish WSH connection 0x000221150afea683

Dear All,
we have applications deployed using tuxedo. All the applications are in working condition, but one new application is deployed with same parameters of working applications but on new client application on Windows 2008 server.
This application cannot access the tuxedo server and giving following error.
152035.WEBAPP!?proc.4020.3152.0: 01-30-2013: Tuxedo Version 11.1.1.2.0 with VS2010, 64-bit
152035.WEBAPP!?proc.4020.3152.0: LIBWSC_CAT:1064: ERROR: Unable to establish WSH connection 0x000221150afea683
152035.WEBAPP!?proc.4020.3152.0: LIBWSC_CAT:1055: ERROR: Unable to establish WSL connection
152035.WEBAPP!?proc.4020.3152.0: LIBWSC_CAT:1027: ERROR: Unable to connect to WSH
152035.WEBAPP!?proc.4020.3152.0: LIBWSC_CAT:1020: ERROR: Unable to obtain authentication level
The same application is working on 32 bit 2003 server. and only changed this in 64 bit 2008 server.
My .bat file on the client is as follows. The tuxedo server is already serving all other clients except this one. Server version is tuxedo10gR3. Firewall on this client is also disabled
cls
set APPDIR=C:\bea\prs\
set WSNADDR=//202.25.16.11:7025
set TUXDIR=C:\\bea\\tuxedo11gR1_VS2010
set PATH=%TUXDIR%\\bin;%APPDIR%;%PATH%
set LD_LIBRARY_PATH=%TUXDIR%\\lib
@echo on
echo "Processing online recovery file: " %2
echo %TUXDIR%
echo %WSNADDR%
echo %LD_LIBRARY_PATH%
cd C:\bea\prs
c:
C:\bea\prs\prs.exe %1 %2 %3 %4
Edited by: user6951085 on Jan 30, 2013 2:42 AM

Dear All,
I found out why this is happening(with the Help of Oracle support), so updating it for future use.
Tuxedo uses random ports for clients that have connected to WSL listener. thats why my first error
152035.WEBAPP!?proc.4020.3152.0: LIBWSC_CAT:1064: ERROR: Unable to establish WSH connection 0x000221150afea683
was coming. this means (as per the documentations) that the WSL have accepted the connection but the next step of connecting to WSH is not done. which causes the above error.
The resolution can be 2 things.
1. Allow allow ports of Server or range of ports starting from port of WSL e.g. port WSNADDR port 7777 to 7777+2000 ports , so that clients can access the WSL port + 2000 ports
2. add a parameter on the tuxedo server ubb file to define a range of ports which can handle client requests. (most probably in the WSL CLOPT portion)
if your network has security and it only allows some ports to be accessed , u can get this error.
Thanks.
Edited by: user6951085 on Jan 31, 2013 1:18 AM

Client could not establish a connection to the remote computer

Sir we are using Windows 2008 Server standard licence edition and using Microsoft Cal open licence (Total 25). Our system are working from smoothly from 1 years. But from one week we have facing client could not establish a connection to the remote
computer.
Sir I am talking from Integral Bank, Jaipur Sir please solve our problem.
With warm regards,
Hariom
M-09875156100
mail : [email protected]

Sir we are using Windows 2008 Server standard licence edition and using Microsoft Cal open licence (Total 25). Our system are working from smoothly from 1 years. But from one week we have facing client could not establish a connection to the remote
computer.
Sir I am talking from Integral Bank, Jaipur Sir please solve our problem.
With warm regards,
Hariom
M-09875156100
mail : [email protected]

Unable to establish loopback connection when running junit tests

Hello,
I just started using jrockit (jrockit-jdk1.6.0_20-R28.1.0-4.0.1) and I encounter a problem running junit tests.
I have 2 tests in the same junit suite, both do binding to 127.0.0.1.
The first test succeeds in the binding. Once it finishes, the second one tries to bind to same address and fails due to IOException, Unable to establish loopback connection (logs below)
If I run them using sun's hotspot jvm they work fine.
If I run them separately, i.e, only one test per suite, each works fine.
It seems that only when switching to jrockit I get the problem.
Any idea?
Thanks,
Edo
Logs:
ERROR [Main Thread_1] Failed to start ConnectionFullVirtualServer[server.traffix.com/127.0.0.1:3868]
[org.jboss.netty.channel.ChannelException: Failed to bind to: server.traffix.com/127.0.0.1:3868 ] thrown
     org.jboss.netty.bootstrap.ServerBootstrap.bind(ServerBootstrap.java:303)
     com.traffix.openblox.core.transport.ConnectionFullVirtualServer.listen(ConnectionFullVirtualServer.java:60)
     com.traffix.openblox.core.transport.VirtualServerTable.listen(VirtualServerTable.java:143)
     com.traffix.openblox.core.transport.StackImpl.doStart(StackImpl.java:772)
     com.traffix.openblox.core.transport.TransportStack.doStart(TransportStack.java:156)
     com.traffix.openblox.core.transport.StackStateMachineImpl.doStart(StackStateMachineImpl.java:75)
     com.traffix.openblox.core.transport.StackStateMachine$StackStateConfigured.processEvent(StackStateMachine.java:60)
     com.traffix.openblox.core.fsm.StateMachine.processEvent(StateMachine.java:90)
Caused by: java.io.IOException: Unable to establish loopback connection
     sun.nio.ch.PipeImpl$Initializer.run(PipeImpl.java:106)
     sun.nio.ch.PipeImpl.<init>(PipeImpl.java:122)
     sun.nio.ch.SelectorProviderImpl.openPipe(SelectorProviderImpl.java:27)
     java.nio.channels.Pipe.open(Pipe.java:133)
     sun.nio.ch.WindowsSelectorImpl.<init>(WindowsSelectorImpl.java:41)
     sun.nio.ch.WindowsSelectorProvider.openSelector(WindowsSelectorProvider.java:26)
     java.nio.channels.Selector.open(Selector.java:209)
     org.jboss.netty.channel.socket.nio.NioServerSocketPipelineSink$Boss.<init>(NioServerSocketPipelineSink.java:219)
Caused by: java.nio.channels.ClosedByInterruptException
     java.nio.channels.spi.AbstractInterruptibleChannel.end(AbstractInterruptibleChannel.java:184)
     sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:518)
     java.nio.channels.SocketChannel.open(SocketChannel.java:146)
     sun.nio.ch.PipeImpl$Initializer.run(PipeImpl.java:78)
     sun.nio.ch.PipeImpl.<init>(PipeImpl.java:122)
     sun.nio.ch.SelectorProviderImpl.openPipe(SelectorProviderImpl.java:27)
     java.nio.channels.Pipe.open(Pipe.java:133)
     sun.nio.ch.WindowsSelectorImpl.<init>(WindowsSelectorImpl.java:41)[ com.traffix.openblox.core.transport.VirtualServerTable.listen(VirtualServerTable.java:146) ][22/12/2010 11:05:57:511]
ERROR [Main Thread_1] Failed to start Endpoint Stack(server.traffix.com Configured)
[org.jboss.netty.channel.ChannelException: Failed to bind to: server.traffix.com/127.0.0.1:3868 ] thrown
     org.jboss.netty.bootstrap.ServerBootstrap.bind(ServerBootstrap.java:303)
     com.traffix.openblox.core.transport.ConnectionFullVirtualServer.listen(ConnectionFullVirtualServer.java:60)
     com.traffix.openblox.core.transport.VirtualServerTable.listen(VirtualServerTable.java:143)
     com.traffix.openblox.core.transport.StackImpl.doStart(StackImpl.java:772)
     com.traffix.openblox.core.transport.TransportStack.doStart(TransportStack.java:156)
     com.traffix.openblox.core.transport.StackStateMachineImpl.doStart(StackStateMachineImpl.java:75)
     com.traffix.openblox.core.transport.StackStateMachine$StackStateConfigured.processEvent(StackStateMachine.java:60)
     com.traffix.openblox.core.fsm.StateMachine.processEvent(StateMachine.java:90)
Caused by: java.io.IOException: Unable to establish loopback connection
     sun.nio.ch.PipeImpl$Initializer.run(PipeImpl.java:106)
     sun.nio.ch.PipeImpl.<init>(PipeImpl.java:122)
     sun.nio.ch.SelectorProviderImpl.openPipe(SelectorProviderImpl.java:27)
     java.nio.channels.Pipe.open(Pipe.java:133)
     sun.nio.ch.WindowsSelectorImpl.<init>(WindowsSelectorImpl.java:41)
     sun.nio.ch.WindowsSelectorProvider.openSelector(WindowsSelectorProvider.java:26)
     java.nio.channels.Selector.open(Selector.java:209)
     org.jboss.netty.channel.socket.nio.NioServerSocketPipelineSink$Boss.<init>(NioServerSocketPipelineSink.java:219)
Caused by: java.nio.channels.ClosedByInterruptException
     java.nio.channels.spi.AbstractInterruptibleChannel.end(AbstractInterruptibleChannel.java:184)
     sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:518)
     java.nio.channels.SocketChannel.open(SocketChannel.java:146)
     sun.nio.ch.PipeImpl$Initializer.run(PipeImpl.java:78)
     sun.nio.ch.PipeImpl.<init>(PipeImpl.java:122)
     sun.nio.ch.SelectorProviderImpl.openPipe(SelectorProviderImpl.java:27)
     java.nio.channels.Pipe.open(Pipe.java:133)
     sun.nio.ch.WindowsSelectorImpl.<init>(WindowsSelectorImpl.java:41

Have you tracked down if the phone actually sends the TCP connection to the desktop? I'm feeling that this is a firewall issue that shows itself when the firewall zone changes (public/private/domain).
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Error - unable to establish JCO connection with SSO

Hello,
I have implemented XSS on WebDP and this is working fine. So my JCO connections SAP_R3_HumanResources must be configured correctly. However I have just done the 'GetFlight' BAPI tutorial and upon execution I get the error:
'com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCException: Could not create JCOClientConnection for logical System: SAP_R3_HumanResources - Model: class com.sap.tut.wd.flightlist.model.FlightModel. Please assure that you have configured the RFC connections and/or logical system name properly for this model!'
CAUSED BY
'User not authenticated (is anonymous) - unable to establish JCO connection with SSO'
Can anyone help here?
Thanks
Mr.T

HI
GOOD
GO THROUGH THIS LINK WHICH CONTAINS THE A SINGLE SIGN-ON IN A COMPLEX SYSTEM LANDSCAPE.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/80fbc690-0201-0010-1aba-93d5c8232b4a
http://www.sap-press.de/download/dateien/1020/sappress_sap_security_authorizations.pdf
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff65b5a2-0a01-0010-5b97-e747192a1d49
THANKS
MRUTYUN

Sybase odbc driver client unable to establish a connection

Please some one help me at this. I am new to sysbase.
I am try to create dsn name for sysbase.
While connecting sysbase i gave sa as user name and administrator as password.
Its connecting and show master db and some other db.
After that i am trying to create dsn. While i creating dsn i gave
1) Hostname as my system hostname.
2) Database name as master db
3) Logon Id as sa (sa is my user name i gave)
4) Port : 5000
When i click test connection it asked password. i gave as administrator.
After few seconds it show sybase odbc driver client unable to establish a connection error.
I provide screenshot what i did and what error is occured.
Please guide me at this.

Hi Srinivasan,
This is the first thing I noticed. You have a Windows 2012 R2 box. Make sure you install the SDK 15.7 SP130 or later or SDK 16.0 PL04 or later. We just got the SDK certified with the R2 box so the installation runs correctly.
Second thing, when you run the odbc manager if you are creating a system dsn you need to start the Windows odbc manager as administrator on a Windows 2012 or Windows 8 box or you get permission issues on this system.
Third thing you should pay attention to is if the application is a 32 or 64 bit application. This decides if you run the 32 or 64 bit Windows odbc manager.
If your still having problems please tell me and I will investigate. I got a Windows 2012 R2 box with SDK 15.7 SP130 and it seems to be working fine.
Thanks,
Dawn Kim

Urgent OmniPortlet JDBC SQL Server - Unable to establish the connection

Not sure if this is the correct forum but as there is another JDBC question regarding portlets in this forum I have to give this a try as it is URGENT I get this solved.
Please see my post in the Portal General Forum
OmniPortlet DataDirect JDBC SQL Server - Unable to establish the connection
Thanks!

Not sure if this is the correct forum but as there is another JDBC question regarding portlets in this forum I have to give this a try as it is URGENT I get this solved.
Please see my post in the Portal General Forum
OmniPortlet DataDirect JDBC SQL Server - Unable to establish the connection
Thanks!

Unable to connect to the remote ftp server using dreamweaver.

For the last one week I have been trying to connect to the remote ftp server using dreamweaver. I spoke to the technical support agency who manage our remote server but they are saying that there is no problem with the server adn they dont know anythign about dreamweaver so cant assist me.
I was suggested to check with adobe team directly and i spoke to a technical support person on the live chat but they said since the version is CS4 - education version, they cant assist me at all!! This is just ridiculous...I am constantly being sent from one place to the other without anything getting resolved!!
Please help somebody!!

I am having a similar problem... maybe. I was connected to my remote site all day yesterday, then out of the blue I tried to "put" an edited file... as I had been doing all day, and I received an FTP error: Cannot make connection to host. Your login or password is incorrect. That's odd, I've been connecting all day. So I went into my sites > manage sites and clicked the Test button on my remote server information and it returned Adboe Dreamweaver CS connected to your webserver successfully. I went back to my file and tried once more to "put" it on the remote server... again FTP Error: cannot make connect to host... So I reboot my computer and start Dreamweaver CS3 again. I reenter my remoter server information and click the Test button. "... connect to your webserver successfully". I try to put any file, FTP error again. So I call my server administrator, he checks the servers logs and says there are no errors and you've connected successfully several times today. I went through the trouble shooting steps listed here, though my FTP Logs are empty. I cannot stay connected or even see the remote folders to try to drag and drop. I tried to run ftp from a windows command prompt and it seems to connect me.
I downloaded an installed an SFTP client and was able to successfully connect to my remote server and upload the files. It's definately a Dreamweaver problem. Any suggestions?

Unable to establish a session with the Address Book Server

I have installed the following
Sun Java System Messaging Server 7 Update 3
Sun Java System Calendar Server 6.3
Sun Java System Directory Server 6.3.1
GlassFish Enterprise Server 2.1 Patch 2 with HADB support
Delegated Administrator 7
Sun Convergence 1 Update 3
as per the instruction here
http://wikis.sun.com/display/CommSuite7/Sun+Java+Communications+Suite+7+on+a+Single+Host
My problem is that when I open outlook and try to add a new contact, I get a message saying:
Unable to establish a session with the Address Book Server. Contact your server administrator for help or try later.
When using webmail, I can add contacts just fine.
How can I fix this problem?
Thanks
Edited by: Nevron on 26 ??? 2010 11:31 ??

Nevron wrote:
My problem is that when I open outlook and try to add a new contact, I get a message saying:
Unable to establish a session with the Address Book Server. Contact your server administrator for help or try later.Refer here:
http://forums.sun.com/thread.jspa?threadID=5424727
You need to log a Sun support request to get the latest Convergence patch.
Regards,
Shane.

Oracle raise ORA-03113 when connect to a remote oracle server using toad

Hi there,
when i use the tool toad connect to a remote oracle server which located in a different city,
when i submit a query in toad,
if the query returns many rows of data, it will raise the error ORA-03113：end-of-file on communication channel,
however if the query returns only a few rows, i won't raise such error,
however, when i use sqlplus connect to that remote server, it won't raise such error,
what's the reason is, can any one tell me how to tackle this problem if using the tool toad. thanks/

hi my oracle vsersion is:
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
my oracle server is 2 nodes rac server,
and i've tried two different kind version of toad v9.6 and v10.5, and both have the same problem
once i query a table, if the result returned more than 30 rows, then it will raise that error, if query returns less than 30 rows, it's ok.
i assume it is a problem concern with network, but i don't know why no such error raise when using sqlplus ?

DUPLICATE DB : ORA-17629: Cannot connect to the remote database server

[oracle@ora11g1 ~]$ export ORACLE_SID=sales
[oracle@ora11g1 ~]$ rman target sys/sales@sales
Recovery Manager: Release 11.2.0.1.0 - Production on Wed Jun 5 13:00:15 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SALES (DBID=690066655)
RMAN> connect auxiliary sys/salestby2@salestby2
connected to auxiliary database: SALES (not mounted)
RMAN> DUPLICATE TARGET DATABASE FOR STANDBY FROM ACTIVE DATABASE SPFILE
2> SET DB_NAME= 'sales'
3> SET DB_UNIQUE_NAME= 'salestby2'
4> SET control_files='/u02/oradata/salestby2/control01.ctl','/u02/oradata/salestby2/control02.ctl'
5> SET DB_FILE_NAME_CONVERT='/u02/oradata/sales/','/u02/oradata/salestby2/'
6> SET LOG_FILE_NAME_CONVERT='/u02/oradata/sales/','/u02/oradata/salestby2/';
Starting Duplicate Db at 05-JUN-13
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=20 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsales' auxiliary format
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsalestby2' targetfile
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesales.ora' auxiliary format
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora' ;
sql clone "alter system set spfile= ''/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora''";
executing Memory Script
Starting backup at 05-JUN-13
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=58 device type=DISK
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/05/2013 13:05:26
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-01017: invalid username/password; logon denied
ORA-17629: Cannot connect to the remote database server
continuing other job steps, job failed will not be re-run
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/05/2013 13:05:27
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/05/2013 13:05:27
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-01017: invalid username/password; logon denied
ORA-17629: Cannot connect to the remote database server

Welcome to the oracle forums!
Please take some time to go through [url https://forums.oracle.com/forums/ann.jspa?annID=1535]FAQ PAGE
Always post 4 digit oracle version and OS details.
Post any query out put between \ \ tags
Mark your questions as answered if you get the answer
Password of SYS user on primary and standby must be same.Copy the password file from primary to standby server
scp $ORACLE_HOME/dbs/orapwv112 <oracle_user@auxiliary_host>:/u01/app/oracle/product/11.2/dbs/orapwdupv112

Unable to establish a connection to a remote MSSQL Server? How to do it?

Similar Messages

Maybe you are looking for