Unable to establish the two way communication with printer j110a

every thing is ok but during the printing or ink level checking this message displayed "unable to establish the two way communication with printer j110a" please reply soon?

Hard Reset – While printer is powered ON, pull the power cord from the printer then from the wall. After 30 seconds reconnect power to wall and printer. This will trigger a ‘dirty power up’ and restore the printer to a known good condition (if it is possible). No user settings are lost with a ‘hard reset’. This ‘Hard Reset’ is one of the most powerful tools to use when the printer hardware is not functioning properly! IF NOT RESOLVED, uninstall hp software & reinstall using latest hp software from hp website.
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

Similar Messages

The computer is unable to establish a two way communication with the device

Hi I am trying to fix a problem for some one else, and I am struggling where to look next. The issue is that we are unable to check the ink levels of a HP Deskjet 1050 printer. The error message states that the computer is unable to establish a two way communication with the device. After running through the troubleshooting guide about this issue on the HP site with no joy, I decided that it may be the printer and suggested a replacememnt. Unfortunately A new HP Envy 5530 was purchased and connected (wirelessly) but the issue remains. I have uninstalled the drivers multiple times, and also disabled any firewall/anti virus software in case this was interfering. I was hoping that some one could point me in the right direction next? None of the other forum posts here (or any google searches) give a solutuon which has fixed the problem. Thanks

No I cant. Unable to ping the printer too, not sure if this is possible normally?

Unable to establish two-way communication with the printer

I have a HP Photosmart B8550 large format printer, but failed recently to print the whole page, but only one third of the page. The OS is Window 7 in my commuter. I downloaded the driver from HP website, but it is not working. The result of the failure is "The computer is unable to establish two-way communication with the device." One of the reasons I guess is that I failed to register my printer because I had no way to finish the registration, because there is no further process even if I put my printer name or number into the required block. Anyhow I failed recently to print anything in the printer. I am seeking the support after a lot of tries. Thanks.

I have two HP computers and two HP Photosmart B8550 printers. A month ago printers were not working. I tried in vain in two computers to download new HP software and driver from internet and got the HP Solution for install error - Windows 7. Based on this Solution on desk, I tried many many times to follow every step, but the result is the same: Fatal error during the installation.
By using other tools like HP Printer Diagnostic Tools, HP Print and Scan Doctor, I failed too because the diagosis or the choices are not accuate. For example, the printer is disconnected. It is wrong even if I changed ports and USB calbe again and again. The control panet can prove that there is communication, but the printer cannot work as directed. There is no way to test the printing as Doctor requested, saying the computer is unable to establish two-way communication with the device, which is not helpful to go ahead with the solution. There is no way to register the printer because there is no such a model HP Photosmart B8550 in its list after search.
It is even worse that the new window dialogue asked me to find HP Photosmart Essentials in my computer to install it again and again, and I could not concel the request whenever I open my computer.
I guess the HP printer software and driver has something wrong in its root design, which leads me to failure in installation so that the computer could not recognize my printer. In short, the new HP software and driver makes my printer not functional.
By the way, my two printers can work internally in printing sample paper and report and two computer are working in perfect condition.

Error message saying "unable to establish two-way communication with device"

I have an HP C309a printer/scanner/fax. I have recently reconfigured it to work wirelessly instead of via the USB cable, which it does. But if I try to go on to the HP Solution Centre/Settings/Printer Toobox to clean the printheads, it tells me that this cannot be done because "the computer cannot establish two-way communication with the device".
If I plug the USB cable back in, I can clean the printheads fine.
Does anyone have a way of allowing me to clean the printheads without using the USB cable?
roger

Hi rogercorke,
I believe you can also clean the printhead from the printer control screen. Press the Wrench button from the printer Home screen and then press Tools>Clean Printhead.
If you need to use this feature wirelessly, try running the HP network diagnostic utility on your wireless setup and see what it says: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/en/hho/ipg/foru...
Please click the blue Kudos star in the post that helped you.

How do i fix the inability to establish two-way communication between my computer and the printer?

HP Photosmart 5510 e-All in One Printer B111a
Windows XP
Message "The computer is unable to establish two-way communication with the device."
Installed new printer
I'm simply trying to get the estimated ink levels.

Please make a Genius Appointment and take it in for service.

Computer unable to establish two-way communication to J4580 through Airport Extreme

I have my J4580 connected to an Airport Extreme base station via usb. I've installed the printer software on my HP laptop (Vista) and Bonjour recognizes the printer as networked & installed, but when I try to print, i receive an error message "Computer is unable to establish two-way communication with the device" and the printer queue shows an error. I've attempted to find a solution through the posts, but haven't seen much that seems to apply to J4580. Any help??? Thanks!

I came across this similar problem and spent days trying to figure it out. I knew I was close when I tried to start the HPZ12
service and it kept failing with "unable to find the specified file". I traced it with a process monitor and found that it was looking
for a registry key that was not present. Specifically:
HKLM\System\CurrentCosntrolSet\Services\Pml Driver HPZ12\Parameters
It was looking for the string:
ServiceDLL which should be set to:
C:\WINDOWS\system32\HPZipm12.dll (or something similar)
The unfortunate thing is that no matter how many times you install and uninstall the HP drivers, then don't reset the registry keys
for the HPZ12 service. In the end, I ended up doing the following:
1. Uninstall software and reboot
2. Go through registry editor and delete the PML key (just did a search for all PML occurences)
3. Deleted the c:\program files\Hewlett-Packard directory
4. Deleted the c:\program files\HP directory
5. Deleted the c:\windows\system32\spool\drivers\w32x86\ contents (anything that referred to an HP printer or driver)
6. Deleted the HKLM\Software\Hewlett-Packard registry key
7. Rebooted
8. Reinstalled and everything worked.
I suggest you backup any registry keys prior to deleting them in case you make a mistake. You can use the Export feature on
the right-click context menu to save each key you delete, or use some tool to make a backup of your registry prior to making
these changes. Similarly, for the files, I renamed directories or created backups of their contents.
Once I reinstalled, I found that there were TONS of new registry keys added that weren't there before. So the real problem is
with HPs install/uninstall. It doesn't clean up properly and any aborted or failed instalation will leave the drivers in a poor state.

Digital Fax to Folder Setup gives error message unable to establish 2-way communication with device

Digital Fax to Folder Setup gives error message unable to establish 2-way communication with device. I can s end a Fax and I can print documents. I can also, now, scan to computer. I have changed the phone line twice, restarted the router, restarted the computer, and made sure the front panel was lit when setting up the Digital Fax folder. I am on a Homegroup network, with both wireles and ethernet computers. When I view the network, it sees both computers (wireless laptop and enthernet desktop), the printer, scanner, and router (VerizonDrive). I recently had to reinstall Windows 7, where Digital Fax to Folder Setup previously worked, and now it doesn't. The network shows up as Network 3. When I try to view the network map, I get the error message that Windows cannot create the network map. Responses from other devices on the network are delayed or there is an incompatible router on the network. What am I doing wrong?

Hello @JiffyFingers and Good Afternoon
From what you have described, and from the work you did on another thread, I believe you'd get better assistance talking to either Microsoft or your router manufacturer. With not being able to create the network map, that's something a bit more intricate than digital fax setup
You can have a look at this Windows cannot create the network map. Responses from other devices on the network are delayed or th... Microsoft thread as well, and you may be able to figure it out from there.
Hope that helps, have a great day!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

VS Exp 2013: Unable to create the Web site ... The components for communicating with FTP servers are not installed.

I have MS Visual Studio Express 2013 It has worked fine for many months and then suddenly (I have made no configuration changes or added new programs) when I try to publish I am getting the message:
Unable to create the Web site 'ftp://ftp.xx.xx/xxx.org.uk/www/htdocs'. The components for communicating with FTP servers are not installed.
(I have replaced actual name with x's).
I had a similar problem some months ago and found that saving all files, closing VS 2013 and re-starting the program fixed the problem. This time it has not.
I am at a loss to know how to take this forwards. I do not use IIS.
Any help would be appreciated.
Michael.

Hi Michael,
For web site development, so you use the VS2013 express for web, am I right? We have to make sure that it is not the VS version issue.
As you said that it worked well before, did you install other add-ins or tools in your VS IDE like
Xamarin or others?
Maybe you could disable or remove all add-ins in your VS IDE, test it again.
please also install the VS2013 update 4 in your side.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Cannot print to my hp 7500. diagnostics says computer cannot establish two-way communication.?

cannot print to previously functional HP7500 on wireless network card. All reports from printer say everything is working fine (network card and printer), but computer says it cannot establish two-way communication. What do I do?

pcunning, I would recommend running this utility and seeing what it shows - or resolves:
http://goo.gl/u3jDE
Let me know!

I am unable to get a two way calendar or contact sync

I am unable to get a two way calendar or contact sync with my iPhone and my mac. iTunes does not sync either way. I use an iphone 3, I think. I do not use iCloud.
Mac OS 10.6.8, itunes up to date, iphone running 4.2.1
Any help would be appreciated.

For resetting the sync history on a Mac running Lion - 10.7.x if needed.
http://support.apple.com/kb/TS1627
If you see the Sync menu in the menu bar, skip to step 3:
If you do not see the Sync menu in your menu bar, skip to step 7.
Hold the Option key on your keyboard, then click the Sync menu in the menu bar:
if you see the Sync menu but you are unable to open it, skip to step 8.
Choose Reset Sync Services.
Click Reset Sync History.
Test for the original issue. If the issue persists, or if you are unable to open the Sync menu, follow these steps:
In the Finder, choose Utilities from the Go menu.
Open Terminal.
In the Terminal window, type or paste the following command on a single line:
/System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsync .pl full
Press Return.
Quit Terminal after the operation has completed (when Terminal returns to the command prompt with a $).

2-way communication with an Applet, is it possible?

I have read a couple of things on the internet that states that Applets cannot create ServerSockets. Is it really true, that you cannot directly communicate to an Applet unless it is polling a server???? There must be some other way, if any one can help, I would be greatly appreciative.
Thanks!
Blaine

I have read a couple of things on the internet that
states that Applets cannot create ServerSockets. Is it
really true, that you cannot directly communicate to
an Applet unless it is polling a server???? There must
be some other way, if any one can help, I would be
greatly appreciative.
1. An applet can do anything that java can, including opening sockets to anything it wants, JNI, file access, etc. However, an applet works in a sandbox and normally it can't do any of those things. So you must do additional work to allow it to do such.
2. A socket back to the server is a two way communication pipe. Information can move both ways. In most designs this is the only way that you want communications to move.
3. An applet talking directly to another applet probably isn't a good idea. There are several reasons, one that springs immediately to mind is that the two boxes in the communication might not be addressable to each other (both have private IPs and are on different subnets.) With a server in the middle this is not a problem, but it is not possible otherwise.

NetBean, I can't establish the oracle database connection with version 9i.

In NetBean, I can't establish the oracle database connection with version 9i.
I have create the datasource and it is fine.
when i try to access the tables i get a message
"Unable to refresh children, connection is broken, unsupported feature"
in netbeans.
Does netbeans support oracle 9i version.
Thanks,
VKK

In NetBean, I can't establish the oracle database connection with version 9i.
I have create the datasource and it is fine.
when i try to access the tables i get a message
"Unable to refresh children, connection is broken, unsupported feature"
in netbeans.
Does netbeans support oracle 9i version.
Thanks,
VKK

The components for communicating with FTP servers are not installed.

I'm running VS 2013 and when I try to publish to ftp site I get the following message. "Unable to create the Web site 'ftp://xx/'. The components for communicating with the FTP servers are not installed." It has been running fine. I
can publish to file system, web sites etc, just not through the ftp settings. I can access the ftp sites from my system, using other programs. It is not trying to connect to the ftp site at all.

Hi paaccess,
Glad to receive your reply.
According to your description, since we can publish an application to ftp site in Visual Studio Prof 2013 in our side. Therefore, to further make sure if the issue is related to the VS IDE issue. We suggest
you try to publish to ftp site on another machine you installed same version of VS Prof 2013 and then check it again.
If you can publish on another machine, I suggest may need to re-download the
VS Prof 2013 from Microsoft website and then install it again on your local machine.
If you still could not publish on another machine, I think that the issue is not related to the VS2013 IDE issue. If possible, I still suggest you post the issue directly to the IIS.NET Forum:
http://forums.iis.net/,
it will better help you solve the issue.
Thanks for your understanding.
Have a nice day!
Best Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Question on PI like RFC,import maps,defining two ways communication

Hi Foks,
I am new to PI need information on the below issues.
1.How we can use RFC?
2.How to define Two way Communication eg:Remote system to ERP vise versa.
4.How ti transport the dev. object from Dev to Prod.
5.How we ca create the maps externally and import in PI is there any way we can do it.
Please help me out
shankar

How we can use RFC?
Import RFC in ESR/IR under IMPORTED OBJECTS that exist under software component in your ESR.
While importing RFC,you have to give system details from where you will import RFC in PI.
How ti transport the dev. object from Dev to Prod.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
thanks
Nidhi

Two way ssl with self signed certificate?

How can I use a self signed certificate with two-way SSL with weblogic 7sp4?
Specfically, I don't want to use any CA authority.
Is it possible to simply have the clients certificate in the servers truststore or not?
I pull out the certificate via
javax.servlet.request.X509Certificate
but when I use a self signed certificate it's never there.
If I instead use a certificate that was created with CertGen it works. But CertGen uses the GenCertCA to create the certificate chain.

How can I use a self signed certificate with two-way SSL with weblogic 7sp4?
Specfically, I don't want to use any CA authority.
Is it possible to simply have the clients certificate in the servers truststore or not?
I pull out the certificate via
javax.servlet.request.X509Certificate
but when I use a self signed certificate it's never there.
If I instead use a certificate that was created with CertGen it works. But CertGen uses the GenCertCA to create the certificate chain.

Unable to establish the two way communication with printer j110a

Similar Messages

Maybe you are looking for