Unable to execute the Report

Hi All,
There is issue, pls help me , when i am executing VL06 in foreground it is working properly and when i am executing in background for the same data system is showing no list (No Output)
What may be the possible reason? pls help me in wayforward
Regards

Hi,
i dont know whether you understood my query perfectly or not?
i am trying to execute a query...
if i execute in English, it says "No texts were maintained in language E for variable"
but if i execute the query in client's Language, its executing perfectly..
i dont see naything in SE63, pls be more clear
so please advice on this
regds

Similar Messages

Unable to execute the report. 2108: The object requested: doest not exist in repository

 Hi, I have developed report and saved . when I tried to execute from Hyperion reports web URL . It is giving me the error . The object requested does not exist in the repository Error No 2108. can any one help me in resolving the isssue tx in advance for the help regards bheemesh 

There might be a number of reasons why your report doesnt open up .One of the main reasons is that your report is incorrectly configured for the server and application .If you think that it is correctly configured .Then try exporting the report and then delete the report from the repository and then re-import the report back to the repository and check the server/application configuration and then run ur report again on the web . You should do fineeeeee.Naveen

TSV_TNEW_PAGE_ALLOC_FAILED error while executing the report

Hi all,
. We are having an info cubeXFIAP_C12 (FIAP: Vendor Line Item Open).In which we have defined 10 Dimensions and 6 Line Item Dimensions. We have created a report on this with Key date as Input Variable Which gives me From Start to Till Date data. Also have an Variable on company code.
Then No of Records in my Cube is 45, 70,624.Compressed the Info Cube data .But No aggregates on it.
Now when I provide the key date as 30.06.2011 and Company code =XYZ.
I am unable to Execute the Report, It gives me a short Dump. Saying NO ROLL MEMORY.
Variables:
1. Key Date: Is a Customer Exit variable .If user Enters Data as 30.06.2011 ,It fetches data from u201C00000000u201D to u201C30.06.2011u201D.
2.Company code: Is a Manual Entry /Default variable.
I also have shot dump.Please find the error analysis of dump below:
The internal table "\FUNCTION-POOL=RRK0\FORM=MEGA_SORT_M\DATA=C_TSX_SORTK[2]-GT
ABIX[1]-GTABIX" could not be further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 4
Number of rows: 1503307
Allocated rows: 1503307
Newly requested rows: 2048 (in 1 blocks)
can any one help me .......
Regards
Laxman

Hi,
Just check following things
1http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCSTMM/BCCSTMM.pdf
2. See whether any back up process is happening and it has consumed the main memory.
3. Are you getting this error regularly
4. See any transport went and compression/aggregation got removed.
5. Check whether there are many dumps in ST22 same time when you execute report
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4ab89e84-0d01-0010-cda2-82ddc3548c65?QuickLink=index&overridelayout=true
6. http://www.sap-press.de/download/dateien/1049/sappress_bw_performance_optimization_guide_080.pdf
7. Check whether Infoprovifder got removed from BIA
8. Query removed from BIA post transport
9. Run RSRT and regenerate the report.
Thanks and regards
Kiran

Unable to select the SSRS report parameters and execute the reports.

Hi All,
We have set of SSRS reports and are been published to SharePoint 2010.After that I have enabled Anonymous user access at SharPoint side,after enabling Anonymous user access no one is able to access the reports so I have removed Anonymous user access
and the reports are working as normal in IE (internet explorer) but not working thorugh CITRIX (before Anonymous user access provided reports are working normal in CITRIX too), able to open welcome page of sharepoint and unable to select any parameters and
unable to execute the rpeorts.
Could you please suggest if you have any solutio as it is very urgent for me.
Regards,
Santosh
Santosh

Have you tried the basics, such as clearing the browser cache? Note that depending on the version of SSRS in use, Anonymous is not supported with SSRS.
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Unable to Execute a Report to send PAN XML messages out of SNC

Hi All,
We are unable to Execute a Report /SCA/DM_TIMESERIES_OUT to send Product Activity Notifications in the form of XML messages out of SNC. We have manitained some Planned Reciepts data in SNC and would like to transfer it out to ECC.
Could anyone help in understanding if we have to maintain mandatory settings before executing this report.
Thanks & Regards,
Sadiq

Hi Pravin,
As per the documentation(http://help.sap.com/saphelp_snc70/helpdata/EN/48/6bdb4767a431cbe10000000a42189d/frameset.htm), we have tried both the manual and automatic features to configure the output from SNC in the form of XML messages.
The manual method gave a message "Time series data for selection is empty" and the Automated method could trigger the XML messages on every incoming message from ECC but we are unable to see the Planned Receipts in that XML messages.
Was just wondering if we can see the Planned Receipt info by changing the settings of this report or by using any other simillar report as the PR info is very important for our development.
Thanks & Regards,
Sadiq

Unable to view the report in Report builder

Hi
we have developed a report and when we run it using developer suite 10g reports,
the previewer opens but we are unable to see the data completely which is hidden by the
Runtime parameter form.
Please let us know how to hide this when we are viewing the report previewer.
Thanks

Thanks
ok, got it .If we open in paper layout it works.
But now when we run the report as client server we are getting error unable to run the report frm-41214
our code is when button pressed.
DECLARE
repid REPORT_OBJECT;
repjobid VARCHAR2(200);
repstatus VARCHAR2(200);
repjobno number;
repserver VARCHAR2(100) := 'rep_mbxserver_FRHome1';
BEGIN
repserver := 'rep_mbxserver_FRHome1';
message('client server');
repid:= FIND_REPORT_OBJECT('rep');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,'\\mbxserver\Developers\emp.rdf'); --(Appl.server path)
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,RUNTIME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,file);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,'\\joe\mtb-erp\emp.lis'); --(Local pc path in lan)
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'dflt.prt');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,repserver);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=YES');
/* Report to be executed via Reports Background Engine, not the 'new' Reports Multi-Tier Server */
/* Destype SCREEN or PREVIEW can be used here */
--SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,SCREEN);
/* Run the report */
repjobid := RUN_REPORT_OBJECT(repid);
copy_report_object_output(repjobid,'\\joe\mtb-erp\emp.lis');
message('File ok');
host('c:\mtb-erp\emp.lis'); -- Try to open the file locally
END;
Please guide us what ie the error and how to proceed.
Thanks in advance.
Edited by: ansu on 20-May-2009 23:24

Performance Problem when executing the report for the first time.

Hi,
We have a Zreport...to improve the performance i created Index on few Data Base table..before my changes it used to take more than 15 minutes after the changes it taking less than 1 min for the same variant and for other variants also.
But when executing the first in morning its taking the same time more than 15 min.Please let me know how to increase the performance when executing first time also,
Thanks,
Kiran.

Hi all,
Appreciate your valuable replies...
@ Thomas: i do accept with your solution running a background job..but user is not accepting for it..thanks for your reply.
@Siegfried Boes : for testing purpose Im running this manytimes..but for user they may
require when ever they need to know open oders.the volume of the data is barongs 300-350 at
max.
@Brad Bohn : After creating the index the repose time reduced to half ...i hope i have
created a right index.
Observation here...I executed the report in production system more than 5 times it took the
same time, my changes are still in quality..so i think may be for selecting the right index
its taking this much time.and for the next time is taking right index n doing it so it taking
less.
Do you accept it?.if so Please let me know how to explicitly say the select statement to
use my index.
Thanks,
kiran.

Open doc URL: unable to open the report in same window

Hi
I'm trying to open a report using open doc url with "swindow=same" but still it opens in a separate window. This happens only when I use JAVA viewer. it works fine in ActiveX and HTML but I want this in JAVA viewer as i'm including this page in my JAVA application and it should open the report in the same window. I tried using "<a>URL</a>" and also target="_self" by HTML interpretation for that object but still the same problem. I'm unable to open the report in the same window by using JAVA viewer for Crystal Reports in info view. Please help me!!!
Envirorment Details: Crystal Reports 2008 SP3, BOE XI R3 SP3
regards
Raghavendra.G

I have tested that myself and It seems that HTML interpretation does not work with the Java viewer.
I have also tried using a hyperlink containing javascript
eg.
javascript:window.location.href='http://www.sap.com'
but the java viewer seems always to launch a new window before processing the command.
I would recommend to open a case by SAP support ( httP://service.sap.com/support )
Regards,
Stratos

Unable to print the report after SP2 (CR 2008 / VS 2008)?

I'm developing an ASP.NET application using VS 2008 (Framework 3.5). I have installed CR 2008 with SP (0, 1, and 2).
I created an invoice report and I printed it as test for the report and it works okay. I needed to change the page size of the report to a user defined size and reset all of the margins to zero.
After I did that I was unable to print the report again and every time I tried to print the report nothing gets printed.
I checked my environment to find the cause of this problem but I found nothing except that I'm using CR runtime for SP1 and I'm currently using SP2. So I did remove CR runtime for SP1 and install CR runtime for SP2.
The problem didn't go away and I faced one more problem.
Usually I'm using a dataset as a data source for my reports. After installing the CR runtime for SP2 I couldn't see any date column in my report data source (Dataset). All other types of columns appear except date fields! Why I have no Idea?
After I do some more testing regarding my issue I found out the following
1. When I add a new report to my web application and I don't change the page setting the report work fine.
2. When I change the page setup settings (Page Margins, horizontal width and vertical height) the report show up okay but never gets printed.
Why I don't know?
Addition to that the report dataset (Data Source) showing in the field explorer never shows any date type field?
All of the above issues happened with me after installing SP2.
OS: WindowsXP Pro SP3
CR 2008 (SP 0, 1, 2)
VS 2008 SP1
Please I need your help.
Edited by: Sami Aljafer on Oct 12, 2009 8:35 PM
Edited by: Sami Aljafer on Oct 12, 2009 8:38 PM

Hi, Sami;
Are you printing from the Crystal preview window, or in code?
If you are printing from the preview window, try printing via code, such as:
An example of print to printer:
crReportDocument = New ReportDocument
crReportDocument.Load("h:\labels2.rpt")
''Use error handling in case an error occurs
Try
''Set the printer name to print the report to. By default the sample
''report does not have a defult printer specified. This will tell the
''engine to use the specified printer to print the report. Print out
''a test page (from Printer properties) to get the correct value.
crReportDocument.PrintOptions.PrinterName = "
dwcb12003\ZDesigner ZM400 200 dpi (ZPL)"
''Start the printing process. Provide details of the print job
''using the arguments.
crReportDocument.PrintToPrinter(1, True, 1, 1)
Please post your question about the dataset as a new post.
Regards,
Jonathan
Edited by: Jonathan Parminter on Oct 12, 2009 2:28 PM

Need a Syatem variable for Executing the report by RFC.

Hi Experts,
Need a Syatem variable for Executing the report by RFC.
what i mean to say is,i can execure the report directly ...then no issues.
But if i execute the Report by RFC ,then i should put a condition with system variable...
Please suggest me ,how can put a condition when i am executing the report through RFC.
Thanks
Babu

Hello Friend,
what I understood that you want to put some extra condition if that report is getting called from RFC...
you can use the system variable SY-CPROG....it will hold the value of the report when it is geeting executing directly...
but when it is getting executed therough RFC...it will hold that RFC name...
Thanks
Krish

Getting different result while executing the report by debugger

Hi All,
I am facing a peculiar issue. When i execute the report from SE38 i am getting a particular set of values in a alv report.
But if i start debugging the report by using /h and execute . i am getting another set of result. How does it happen any idea.
Without debugger result is
a
b
c
With debugger i am getting result as
a
d
e
f
What may be the reason . Kindly help.
Thanks in advance.
S.Velsankar

Hi,
you mean you have'nt change anything while debugging and results are different when ALV is displayed?
I don't really understand your issue... Could you give more details?
Kr,
m.

Button on toolbar after executing the report i.e. after result display

Hi, after executing the report result is being displayed.Now at this stage I want a button on the application toolbar clicking on which will allow a perform to get triggered.
I tried in following manner:
SELECTION-SCREEN: FUNCTION KEY 1.
*INITIALIZATION.
TABLES: SSCRFIELDS.
*MOVE icon_mail TO sscrfields-functxt_01.
*form SEND_EMAIL .
IF sy-ucomm = 'FC01'.
     PERFORM SEND_MAIL_ASSET_STATUS.
ENDIF.
But it's not ok.The above way is not working.
Please note: I want button on toolbar only after executing the report i.e. after result display.
How can I do this?
Kindly guide.
Best regards.

hi
if you are using alv than just pass 3 values to function call
     I_CALLBACK_PROGRAM                = SY-REPID   " program name
     I_CALLBACK_PF_STATUS_SET          = 'STATUS' "PF-STATUS
     I_CALLBACK_USER_COMMAND           = 'UCOMMAND' " subroutine name
and check the value of UCOMM in subroutine

Error while executing the report to display on the web in BI 7.0?

Hi All,
In BI 7.0, Getting Error while executing the report to display on the web?
The error message displayed is:
" Network Access Message : The website cannot be found ".
Source: DNS error.
Why this error is coming.
Wht needs to be done.
Thanks in Advance.

Hi Kishore,
All the configurations are in proper shape.
We need to change any IP adresses or proxy settings in the Internet explorer (Tools -> Internet options -> Connections -> LAN settings -> etc.,)
Do We need to configure any server address for getting the output to display on web pages in BI 7.0.
EP is not configured over here. Is that causing the problem.
Thansk in Advance.

Error while executing the report FAGLB03

Hi,
i am getting the below error while executing the report FAGLB03 and double click on the balances to view the report on line item wise.
There is no active info structure for field catalog SAP_FI_DOC_003
Message no. Q6504
Diagnosis
The system wants to access the Archive Information System. It uses the field catalog SAP_FI_DOC_003 to do this. However, there are no active archive information structures for this field catalog.
Procedure
Create an info structure for field catalog SAP_FI_DOC_003 or activate an info structure for this field catalog.
Please could some one help me on this issue.
Thanks & Regards,
Venkat

Hi,
Please refer the below note.
1361304.
Reg
Madhu M

Unable to execute the substitution variable in calc scripts in essbase 11.1

Unable to execute the substitution variable in calc scripts in essbase 11.1.3
FIX(&CURRVERSION,COLA)
Unit=units*Listprice;
dataexport "file" "," "E:\NEW.TXT";
ENDFIX
Error: 1200471 Error parsing formula for FIX STATEMENT (line 1): expression expected before [)]
This is error it throws when executing the calculation script
I wonder whether its a problem with substitution variable i want to know wat went wrong inside the fix statement
I have created substitution variable use maxl
Installed the essbase in custom manner and standlone mode nt register with the shared services ,
Is this problem with the custom installation of essbase
Regards
shenna

If you remove the substitution variable and replace it with the actual value (whatever that is), does the code work? That will tell you if the issue is around the substitution variable or not.
John -- First you race Glenn, then you race me -- and you always win. :)
Regards,
Cameron Lackpour

Unable to execute the Report

Similar Messages

Maybe you are looking for