Unable to execute the SDT request Java_EE operation configure on hostname

Hi Experts,
We are performing EHP1 upgrade in one of our dual stack system. During Configuration phase, ABAP Configuration is successfully completed but when it is going to Java part it is showing below error:
unable to execute the SDT request Java_EE operation configure on hostname avggstoh instance 02.
Initialization os sync events failed See following messages:
Preparing execution of modules INIT, EXTRACT, CONFIG, SHADOW_SECSTORE failed. See previous messages.
Java upgrade tool is running, but not started by this request handler. Please stop tool and try again.
We reset the installation so many times and tried again, but it always shows same error at same phase.
Kindly help on this issue.
Thanks
HAri

Hi harish,
How did u manage to reset when u stop the installation in unix..
i just encountered this error when i have stopped all the upgrade process & did not reeset properly.
Please provide me steps ,,how did u manage to reset so that i can cross check & advice u on that
regards,
rahul.

Similar Messages

  • Unable to execute the sdt request java_ee operation

    Hi Experts,
    We are performing EHP1 SPS 3 upgrade from SP 14 stack in one of our dual stack system. During Configuration phase, ABAP Configuration is successfully completed but when it is going to Java part it is showing below error:
    unable to execute the SDT request Java_EE operation configure on hostname avggstoh instance 02.
    Initialization os sync events failed See following messages:
    Preparing execution of modules INIT, EXTRACT, CONFIG, SHADOW_SECSTORE failed. See previous messages.
    Java upgrade tool is running, but not started by this request handler. Please stop tool and try again.
    We reset the installation so many times and tried again, but it always shows same error at same phase.
    Even we have restarted the whole host in case some port was used. But it also did not help. For me it seems to problem on this host as one other portal system on same host has this error during EHP upgrade.
    While same upgrade was finished successfully on other systems on different host.
    If anybody has some hint related to this problem, then please let me know. Your help will be highly appreciated.
    Thanks
    Sunny Pahuja

    hi,
    ya we resolved it successfully. in our case a lot of systems are installed on same host. And we found that our one of system was using the port 6240 which generally used by SAPehpi to connect to JSPM.
    We shutted down the system and tried to restart the upgrade and it finished successfully. And even we did not faced this problem again in any of systems installed on this host.
    So, please check all ports are free which are used by SAPehpi.
    Thanks
    Sunny

  • Unable to execute SDT request JAVA_EE during the JAVA---Input_adm_user_pwd

    Dear Friends
    I am stuck in CONFIGURATION PHASE of EHP5 Upgrade.
    The ABAP phase has been completed but stuck in the Java processing  INPUT_ADM_USER_PWD
    "unable to execute the SDT request Java_EE operation configure on
    hostname dbserver1 instance 02 Modules execution failed.
    Execution of the unit PREPARE failed. Connection to the Upgrade Tool was closed."
    TROUBLE TICKET LOG
    Trouble Ticket Report
    Installation of enhancement package 1 for SAP NetWeaver 7.0
    SID................: $(/J2EE/StandardSystem/SAPSystemName)
    Hostname...........: $(/J2EE/SAPGlobalHost)
    Install directory..: $(/J2EE/StandardSystem/SAPSIDDirectory)
    Upgrade directory..: $(/JUMP/DIR/MAIN)
    Database...........: $(/J2EE/DBSystem/DBInfoName)
    Operating System...: $(/J2EE/StandardSystem/ServiceInstance/BCCentralServicesInstanceHost/OpSysType)
    JDK version........: $(/SystemProperties/JavaVersion) $(/SystemProperties/JavaVendor)
    SAPJup version.....: $(/MAIN_VERSION)
    Source release.....: $(/ER_CODE)
    Target release.....: $(/J2EE/ShadowSystem/Version)
    Start release SP...: $(/J2EE/StandardSystem/SPLevel)
    Target release SP..: $(/J2EE/ShadowSystem/SPLevel)
    Current usages.....: $(/J2EE/StandardSystem/Usages/StrCurrentUsages)
    ABAP stack present.: $(/J2EE/StandardSystem/BCSystemPresent)
    The execution of  ended in error.
    Could not perform operation on secure store. See previous messages.
    Could not perform operation on secure store. See previous messages.
    Class com.sap.security.core.server.secstorefs.SecStoreFS method createStoreWithEncryption has thrown the exception com.sap.security.core.server.secstorefs.FileIOException
    com.sap.security.core.server.secstorefs.FileIOException: I/O error on file "e:\usr\sap\PRD\SYS\global\security\data\JUpgrade.key".
    java.io.FileNotFoundException: e:\usr\sap\PRD\SYS\global\security\data\JUpgrade.key (The system cannot find the path specified)
    More information can be found in the log file .
    Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
    com.sap.sdt.util.secstore.SecureStoreException
    Could not perform operation on secure store. See previous messages.
    INPUT_ADM_USER_PWD
    INIT
    PREPARE
    NetWeaver Enhancement Package Installation
    SAPJup
    Java Enhancement Package Installation
    Regards
    Anwer Waseem
    Edited by: Anwer Waseem on Nov 9, 2011 11:48 PM

    TROUBLE TICKET LOG
    Trouble Ticket Report
    Installation of enhancement package 1 for SAP NetWeaver 7.0
    The execution of ended in error.
    Could not perform operation on secure store. See previous messages.
    Could not perform operation on secure store. See previous messages.
    Class com.sap.security.core.server.secstorefs.SecStoreFS method createStoreWithEncryption has thrown the exception com.sap.security.core.server.secstorefs.FileIOException
    com.sap.security.core.server.secstorefs.FileIOException: I/O error on file "e:\usr\sap\PRD\SYS\global\security\data\JUpgrade.key".
    java.io.FileNotFoundException: e:\usr\sap\PRD\SYS\global\security\data\JUpgrade.key (The system cannot find the path specified)*
    its locating on drive e:\ which is wrong directory, the global directory are avaiable on drive S:\; this is the reasons that processing are ending with error.
    Please advise how to resolve ASAP.
    More information can be found in the log file .
    Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
    com.sap.sdt.util.secstore.SecureStoreException
    Could not perform operation on secure store. See previous messages.
    CHECK_PREPARE_UNIT
    Regards
    Anwer Waseem

  • Unable to execute the substitution variable in calc scripts in essbase 11.1

    Unable to execute the substitution variable in calc scripts in essbase 11.1.3
    FIX(&CURRVERSION,COLA)
    Unit=units*Listprice;
    dataexport "file" "," "E:\NEW.TXT";
    ENDFIX
    Error: 1200471 Error parsing formula for FIX STATEMENT (line 1): expression expected before [)]
    This is error it throws when executing the calculation script
    I wonder whether its a problem with substitution variable i want to know wat went wrong inside the fix statement
    I have created substitution variable use maxl
    Installed the essbase in custom manner and standlone mode nt register with the shared services ,
    Is this problem with the custom installation of essbase
    Regards
    shenna

    If you remove the substitution variable and replace it with the actual value (whatever that is), does the code work? That will tell you if the issue is around the substitution variable or not.
    John -- First you race Glenn, then you race me -- and you always win. :)
    Regards,
    Cameron Lackpour

  • Unable to delete the last request in full load infopackage

    Hi All,
    I have full load infopackage with many requests with green status  and thier request genetaed is 0.
    Because of last failure request ia m aunable to activate dso.
    i Made last failure request green and triggered. but not successful.
    i made it red and tried deleting, no sucess. when i delete its giving Dump
    Now i am unable to delete the first request in green status also.its not deleting.
    can i delete whole data in dso and do full load again? how to check if there any other infopackages  on this dso..
    ALL This issues camw across triggering process chian...plz let me know oyur answers....
    Thanks,
    Venkat

    Hi Venkatesh,
    I tried deleting through  RSODSACTREQ.. but the delete option was disabled in the  TABLE ENTRY TAB.
    The last request is failed one with red and not tranfered with full records..
    All the other records which are in green status  does not have symbol genated for reporting purpose and
    Request id generated up on activation is zero..
    I  tried deleting the first request.. when i change its satus to red...
    QM action on PSA Z[DSONAME] must have now:Checked to see if automatic activation of the M version should be started.
    The M version is then activated if necessary  Now?
    Req. 0001439786 in DataStore Z[DSONAME]must have QM
    status green before it is activated
    Request 0001427251 is not completely activated.
    Please activate it again.
    But i am unable to find  both the requests under psa and  in adminstartion data target tab... there are some other requests with red status iin psa...
    When i try to delete failed request its giving dump
    Thanks,
    Venkat.

  • Unknown Host Unable to locate the server requested --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no

    Hello,
    Today i tried accessing transitbux.com with mozilla, but i'm getting this kind of a error as mentioned below:
    Unknown Host
    Description: Unable to locate the server requested --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no longer exists. Double-check the name and try again.
    Can anyone help me please, and the same website is accessible with my phone.
    Help me please. :(
    Regards
    -

    Try http://www.transitbux.com/
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

  • Unable to delete the DTP request.

    Hi friends, iam unable to delete the DTP request, its showing in yellow mode, iam unable to change it to green or red, i checked in SM50 and SM51 ...is there any other way to delte the request ....any FM .
    My version is 7.0 and SP16 BI_Content 9.
    Thanks in advance,

    Hi,
    Try this.
    RSBKDATAPAKID DTP: Status Table for Data Packages.
    Check this table if you can change the status to red.
    If yes - than delete all the requests from manage screen.
    Also check table RSBKREQUEST DTP to delete Request if possible.
    Hope this helps.
    Thanks,
    JituK

  • Unable to execute the report.  2108: The object requested: doest not exist in repository

    <BR>Hi,<BR><BR>I have developed report and saved . when I tried to execute from Hyperion reports web URL . It is giving me the error . The object requested does not exist in the repository Error No 2108.<BR><BR>can any one help me in resolving the isssue<BR><BR><BR>tx in advance for the help<BR><BR>regards<BR>bheemesh<BR>

    There might be a number of reasons why your report doesnt open up .One of the main reasons is that your report is incorrectly configured for the server and application .If you think that it is correctly configured .Then try exporting the report and then delete the report from the repository and then re-import the report back to the repository and check the server/application configuration and then run ur report again on the web . You should do fineeeeee.Naveen

  • Internet service Request .. Unable to execute the Internet service

    Hi gurus,
    System MYSAP ERP 2005 ECC 6.0
    I am trying to create a new ISR for my scenario. I am following the ISR cook for the same. I cretae an Internet service mentioned. But when I try to execute the internet service that I created, it says that my internet service does not exist in my
    URL http://xxxx.corp.yyyy.com:8000/sap/bc/gui/sap/its/ZOVT/! call was terminated because the corresponding service is not available.
    I went to SICF and navigated the path and saw that my Internet service weas not avialable there. In the previous versions when i worked on external ITS there was not other setting requried when I created a new Internet service . I just had to publish it and it was able to be executed. Is it different in ECC.60? do i need to create an entry in SICF? There was no entry avialable for my Service ZOVT in SICF even after I published it.
    Please advise.
    regards
    Sam
    Message was edited by:
    sameer chilama

    Hi Sammer,
    yes you need to create service in SICF..After that you also need to connect the service to respective application which you can do it through service options on double clicking the newly created service and provide the GUI link at settings tabe..
    The same should be called up in SE80 with the respective settings...now publish it internal as webgui/its. (ECC 6 internal ITS)..
    Thanks

  • Second level Manager Unable to view the leave request

    Hello Experts
    We are using three levels approval leave request, first level manager able to approve successfully, when second level manager approving the leave request is unable to see any contents inside the request, its showing blank.
    Kindly help me on this.
    Thanks
    Neelima.

    Hi,
    I have a requirement in which I have to sent Leave Workflow to three approvers. For that I maintain the approvers in a customising table. What I did is, I took a copy of the standard Leave WF and added a step in loop (to read the table maintained, through a bor method). For the last approver, he has to get the standard leave approval task and for that reason i looped my custom bor for 2 times and put the standard leave approval task outside the loop.
    Now the issue is that, eventhough the first approver gets the workitem and approves that, the next approver is not getting the workitem for him. Workflow is going into an error state stating that the successor node is not found.
    Please tell me whether my approach for customising leave workflow is correct. And if correct, what could be the reason for the error that I get.
    Regards,

  • Unable to release the change request from se01

    HI All,
    Recently i had applied Rsecnotes as per sap recommendation in EWA Report and I implemented successfully in DEV System. But, When i try to release the change requests from SE01 in (DEV System)
    it is giving the error message "Object Func<objectname> is inactive". I have unlocked all the request and checked but still problem exsist.
    Please help me to release the request and implement in the landscape.
    Thanks,
    Rajesh N

    Hi,
    Activate the object using se03 and then relaese the request
    thanks

  • Unable to execute the following sql statement in Jdev10g -- custom sql quer

    Hi All,
    I have requirement where I need to execute the below Query String through Jdev10g to Sql Server 2005.
    Query string -- select * from table where #InputString
    << Input String -- col3 like 'col%' and col1 like 'col2%' ...... >>
    Here the Input string will be generated by the client and the results will be transferred back to the client. Can any one help how to do this? Input string would like
    col1 like 'col%' and col2 like 'col2%' and so on.. and this is dynamic which can be changed in runtime like col3 like 'col3%' and col1 like 'col1%' and so on..
    I have tokenized the string and assinged the values and executed the custom string through Input parameters for all the fileds instead of only search string .. since table having so many null fields not receiving the exact row counts and records.. hence I have to pass only the Input string as I mentioned like Query String.. If some body got the same concern please let me know..
    Your help would be greatly appreciated..
    Thanks & Regards,
    Khasim

    Hi All,
    Even though the answer is a bit tedious by formulating the where clause with all fields and dynamic parameters, I achieved the goal. But we do have another option to use orcl:query-database in the transformation. But this one give tedious results when you are trying to achieve multiple rows from this. If some one have a better idea to utilize this query-database function, you are most welcome.
    Thanks & Regards,
    Khasim

  • Unable to execute the query after transpoting to Quality in BI7.0

    Hi Friends,
    We are facing problem while executing the query in BI 7.0 after transporting to Quality system.
    Whenever we are clicking on the query in Analyser after transporting to quality, it is throwing an error like "Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION" and " system error in program SAPLRRI2 and form DIM_FAC_SRDATE-02" and it is disconnecting from BI system.
    The transport went successfully to quality system.
    Please do the needful regarding the above errors.
    Thanks
    Rama

    Hello,
    I resolved the problem. I removed all the variables in the query did another "Query Check" and the error message was clearer.
    There were missing infobjects in the Multi-Provider.  When I fixed this the error was gone.
    Thanks.

  • Unable to execute the Report

    Hi All,
    There is issue, pls help me , when i am executing VL06 in foreground it is working properly and when i am executing in background for the same data system is showing no list (No Output)
    What may be the possible reason? pls help me in wayforward
    Regards

    Hi,
    i dont know whether you understood my query perfectly or not?
    i am trying to execute a query...
    if i execute in English, it says "No texts were maintained in language E for variable"
    but if i execute  the query in client's Language, its executing perfectly..
    i dont see naything in SE63, pls be more clear
    so please advice on this
    regds

  • Error if I try to execute the Script BI Java / Technical configuration

    Hello everybody,
    I get the follow error back, if I try to execute the BI Java / Technical Configuration of BI - Java (repeatable, reproducible):
    Validation Error: Test SLD connection:It was not possible to test the SLD system (SLD_HOST) with the user (SLD_ADMIN)  and its password given in the property sheet. Please verify and retype the values in the corresponding fields. You can also go to visual administrator -> "SID" -> Server xx -> Services -> Configuration adaptor -> CTC -> Propertysheet SystemProperties, make sure that the parameters related to SLD are correctly typed and rerun the template.
    We sure, that the Porperties are the current parameters correct.
    Any ideas ?
    Kind regards
    Stephan Kohler

    Hii Stephan
    I am facing the exact problem as you are did. The SLD connection failed when BI-java template installer. Were you able to solve this? Is the problem due to user missing in the central SLD as in BI ABAP. Please let me know the solution if it had worked for you.
    Thanks, Raj

Maybe you are looking for

  • Non-Alphanumeric Character in a String

    I understand if we have a non-alphanumeric character in a String, we have to put a backward slash in front of that character. For example, we have to put a backward slach in front of a "backward slash". Eg. we do \\ to put a backward slash in a Strin

  • 5.1.3 and ClickToFlash

    I've just updated to 5.1.3 and ClickToFlash seems to have stopped working. I get the greyed out box but clicking does not - even if I whitelist the site it still has grey boxes. I've reinstalled it to no avail and there is nothing listed on the Click

  • Failed to retrieve technical system: QEM_NABP~JAVA

    Hi, I am configuring Solution manager Diag. with J2EE engine ( xEM system ). I executed tx.code solman_setup and then selected managed system configuration. Executed Diagnostic prerequisites and then received error Failed to retrieve technical system

  • CS5 Magic Wand Tool Question

    I have a new Mac and I just got CS5. I find that the Magic Wand tool works differently than it did with CS3 on my PC. First, I'm used to being able to see the "marching ants" as I select the areas. In CS5/Mac they don't appear until the area is selec

  • Clone 9.0.1.3.1 (Server A) to 10.2.0.1 (Server B)

    Hello, I've been trying to clone a 9i (live production) database to 10g (currently on a test box). I've read the documentation and some posts, but I've ran into a few obstacles. Here's an outline of what's going on: Server A: Database version: 9.0.1.