Unable to expand Traditional volume on Novell 6.5 Sp7 Server
The following error message appears while attempting to expand the traditional volume by using NRM.
NRM DiskCarve ERR:MM_VOLUME_EXPAND (TOPS)during EXPAND_STR operation -3007(FFFFF441) 65547(1000B) 18(12) -1673158656(9C45A000) 104857600(6400000)
I would really appreciate any help!
Regards,
Ahleia
The following error message appears while attempting to expand the traditional volume by using NRM.
NRM DiskCarve ERR:MM_VOLUME_EXPAND (TOPS)during EXPAND_STR operation -3007(FFFFF441) 65547(1000B) 18(12) -1673158656(9C45A000) 104857600(6400000)
I would really appreciate any help!
Regards,
Ahleia
Similar Messages
-
Unable to expand volume on array
I've got a Mac Pro (Early 2008, 8x2.8Ghz, 6GB memory) with a Highpoint RocketRaid 3522 card in it. I started out with a raid 5 array of 3 1TB WD GreenPower drives in a SuperMicro CSE-M35T-1B sata cage. Partitioned it as GUID HFS+ (1.8TB) and it works great.
However, I added two more disks and expanded the raid array to a 2.7TB Raid 6 array. Mac OS sees that I have a 2.7TB drive with a 1.8TB partition on it, but when I try to expand the partition I get the error "MediaKit reports partition (map) too small".
When I try to resize it on the command line using diskutil it complains that the volume size is too large. running "diskutil resizeVolume /dev/disk4s2 limits" tells me I can only expand the volume up to 2TB. But even running "diskutil resizeVolume /dev/disk4s2 1.9TB" fails
Apple states that the maximum volume size is 8 Exabytes as of 10.4 and later and i'm running 10.5.2.
Any suggestions? I'm trying to avoid having to back up all the data and reformatting the drive. I plan to eventually expand the array to a full 8 1TB drives, i.e. 5.4TB and backup up 1.5TB of data is rough - but backing up more than that is nearly impossible.
And yes, I do know that RAID is not a substitute for backing up. I'm comfortable with the level of protection that RAID 6 gives me given the files that I store on this drive.
Message was edited by: Scott_DCHave you tried a PRAM reset?
http://support.apple.com/kb/ht1379
Ciao. -
Unable to expand child links in ALV Tree
Hi,
I have written the following code for ALV Tree using function modules.
REPORT ZSID_ALV_TREE.
type pool declarations for tree
TYPE-POOLS : fibs,stree.
tables: ekko.
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
it_ekpo TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
it_emptytab TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko,
wa_ekpo TYPE t_ekko.
DATA:w_repid type sy-cprog.
*Data declaration for additional node information
DATA : t_node TYPE snodetext.
*Internal table and wa decl for nodes
DATA : it_node LIKE TABLE OF t_node INITIAL SIZE 0,
wa_node LIKE t_node.
*Start of selection event
START-OF-SELECTION.
*Select the data for tree
PERFORM fetch_data.
*Build the hierarchy for tree
PERFORM build_hierarchy.
*Build Tree for display
PERFORM build_tree.
*& Form fetch_data
text
--> p1 text
<-- p2 text
FORM fetch_data .
SELECT ebeln
up to 10 rows
FROM ekko
INTO corresponding fields of TABLE it_ekko .
loop at it_ekko into wa_ekko.
SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
FROM ekpo
appending TABLE it_ekpo
where ebeln eq wa_ekko-ebeln.
endloop.
endform.
*& Form build_hierarchy
text
--> p1 text
<-- p2 text
FORM build_hierarchy .
*Building the nodes and hierarchy for tree
CLEAR : it_node[], wa_node.
wa_node-type = 'T'.
wa_node-name = 'Product Hierarchy Level'.
wa_node-tlevel = '01'.
wa_node-nlength = '35'.
wa_node-color = '4'.
wa_node-text = 'Test'.
wa_node-tlength ='20'.
wa_node-tcolor = 3.
APPEND wa_node TO it_node.
CLEAR wa_node.
loop at it_ekpo into wa_ekpo.
wa_node-type = 'P'.
wa_node-name = 'Purchasing Doc'.
wa_node-tlevel = '02'.
wa_node-nlength = '25'.
wa_node-color = '4'.
wa_node-text = wa_ekpo-ebeln.
wa_node-tlength ='20'.
wa_node-tcolor = 3.
APPEND wa_node TO it_node.
CLEAR wa_node.
*Filling the values of internal table into tree
wa_node-type = 'P'.
wa_node-name = 'Material No'.
wa_node-tlevel = '03'.
wa_node-nlength = '20'.
wa_node-color = '1'.
wa_node-text = wa_ekpo-matnr.
wa_node-tlength ='20'.
wa_node-tcolor = 4.
APPEND wa_node TO it_node.
CLEAR wa_node.
ENDLOOP.
ENDFORM. " build_hierarchy
*& Form build_tree
text
--> p1 text
<-- p2 text
FORM build_tree .
*Fm for constructing the tree
CALL FUNCTION 'RS_TREE_CONSTRUCT'
TABLES
nodetab = it_node.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
w_repid = SY-CPROG.
*FM for displaying the tree
CALL FUNCTION 'RS_TREE_LIST_DISPLAY'
EXPORTING
CALLBACK_PROGRAM = w_repid
CALLBACK_USER_COMMAND = 'USER1_COMMAND'
CALLBACK_TEXT_DISPLAY =
CALLBACK_MOREINFO_DISPLAY =
CALLBACK_COLOR_DISPLAY =
CALLBACK_TOP_OF_PAGE =
CALLBACK_GUI_STATUS =
CALLBACK_CONTEXT_MENU =
STATUS = 'IMPLICIT'
CHECK_DUPLICATE_NAME = '0'
COLOR_OF_NODE = '4'
COLOR_OF_MARK = '3'
COLOR_OF_LINK = '1'
COLOR_OF_MATCH = '5'
LOWER_CASE_SENSITIVE = 'X'
MODIFICATION_LOG = 'X'
NODE_LENGTH = 40
TEXT_LENGTH = 75
TEXT_LENGTH1 = 0
TEXT_LENGTH2 = 0
RETURN_MARKED_SUBTREE = 'X'
SCREEN_START_COLUMN = 0
SCREEN_START_LINE = 0
SCREEN_END_COLUMN = 0
SCREEN_END_LINE = 0
SUPPRESS_NODE_OUTPUT = 'X'
LAYOUT_MODE = ' '
USE_CONTROL = 'L'.
IMPORTING
F15 =
ENDFORM. " build_tree
FORM USER1_COMMAND TABLES node STRUCTURE seucomm
USING command
CHANGING value(exit)
VALUE(LIST_REFRESH).
write 'Hi'.
endform.
But I have a problem
1. I can expand the child links in tree structure when I comment the exporting parameter CALLBACK_USER_COMMAND in the function Module 'RS_TREE_LIST_DISPLAY'.
2 But when i uncomment the exporting parameter I am unable to expand the child links in output.
Please let me know if i have missed something in the code.
Useful answers will be rewarded
Regards,
SiddharthHi Sidhhart,
Check out this prog.
REPORT Z_KULDEEP_ALV_HIERARCHY
message-id zord
line-size 270.
Tables:
Vbap,
Vbak.
*& PROGRAM VARIABLES
type-pools slis.
*& INTERNAL TABLES & STRUCTURES
data:
begin of t_header occurs 0,
EXPCOL type c,
vbeln type vbak-vbeln,
audat type vbak-audat,
vkorg type vbak-vkorg,
vtweg type vbak-vtweg,
spart type vbak-spart,
end of t_header,
begin of t_item occurs 0,
vbeln type vbap-vbeln,
posnr type vbap-posnr,
matnr type vbap-matnr,
arktx type vbap-arktx,
pstyv type vbap-pstyv,
end of t_item,
t_fieldcat type standard table of slis_fieldcat_alv with header line,
t_event type standard table of slis_alv_event with header line,
x_keyinfo type slis_keyinfo_alv,
x_layout type slis_layout_alv,
x_variant like disvariant.
*& GLOBAL VARIABLES
data:
g_repid type sy-repid,
g_formname type slis_formname value 'TOP_OF_PAGE'.
*& SELECTION SCREEN *
selection-screen begin of block a with frame title text-000.
Select-options : s_date for vbak-audat obligatory.
p_date type vbak-audat.
selection-screen end of block a.
*& INITIALIZATION *
initialization.
clear : g_repid,t_header,t_item.
refresh : t_header,t_item.
g_repid = sy-repid.
*& AT SELECTION-SCREEN *
at selection-screen.
if s_date-high > sy-datum.
message e001.
endif.
start-of-selection.
select vbeln audat vkorg vtweg spart from vbak
into corresponding fields of table t_header
where audat in s_date.
select vbeln posnr matnr arktx pstyv from vbap
into table t_item
for all entries in t_header
where vbeln = t_header-vbeln.
end-of-selection.
perform sub_display_alv.
*& Form sub_display_alv
text
--> p1 text
<-- p2 text
form sub_display_alv.
*column 1
perform sub_populate_fieldcatalog using:
'VBELN' " field name
'T_HEADER' " table name
'ORDER' " column heading
'8' " column width
' ' " fix column?
' ' " key
' ' " no display
' ' " sum this column
'X' " do not sum
' ' " input allowed?
' ' " currenct type field name
' ' " data type
'X'. " hotspot.
*column 2
perform sub_populate_fieldcatalog using:
'AUDAT' " field name
'T_HEADER' " table name
'ORDERDATE' " column heading
'10' " column width
' ' " fix column?
' ' " key
' ' " no display
' ' " sum this column
'X' " do not sum
' ' " input allowed?
' ' " currenct type field name
' ' " data type
'X'. " hotspot.
*column 3
perform sub_populate_fieldcatalog using:
'VKORG' " field name
'T_HEADER' " table name
'SALES ORG' " column heading
'6' " column width
' ' " fix column?
' ' " key
' ' " no display
' ' " sum this column
'X' " do not sum
' ' " input allowed?
' ' " currenct type field name
' ' " data type
'X'. " hotspot.
*column 4
perform sub_populate_fieldcatalog using:
'VTWEG' " field name
'T_HEADER' " table name
'DIVISION' " column heading
'2' " column width
' ' " fix column?
' ' " key
' ' " no display
' ' " sum this column
'X' " do not sum
' ' " input allowed?
' ' " currenct type field name
' ' " data type
'X'. " hotspot.
*column 5
perform sub_populate_fieldcatalog using:
'SPART' " field name
'T_HEADER' " table name
'CHANNEL' " column heading
'4' " column width
' ' " fix column?
' ' " key
' ' " no display
' ' " sum this column
'X' " do not sum
' ' " input allowed?
' ' " currenct type field name
' ' " data type
'X'. " hotspot.
*column 6
perform sub_populate_fieldcatalog using:
'vbeln' " field name
'T_item' " table name
'Order' " column heading
'8' " column width
' ' " fix column?
' ' " key
' ' " no display
' ' " sum this column
'X' " do not sum
' ' " input allowed?
' ' " currenct type field name
' ' " data type
'X'. " hotspot.
*column 7
perform sub_populate_fieldcatalog using:
'POSNR' " field name
'T_ITEM' " table name
'SALES DOC.ITEM' " column heading
'8' " column width
' ' " fix column?
' ' " key
' ' " no display
' ' " sum this column
'X' " do not sum
' ' " input allowed?
' ' " currenct type field name
' ' " data type
'X'. " hotspot.
*column 8
perform sub_populate_fieldcatalog using:
'MATNR' " field name
'T_ITEM' " table name
'MATERIAL' " column heading
'8' " column width
' ' " fix column?
' ' " key
' ' " no display
' ' " sum this column
'X' " do not sum
' ' " input allowed?
' ' " currenct type field name
' ' " data type
'X'. " hotspot.
*column 9
perform sub_populate_fieldcatalog using:
'ARKTX' " field name
'T_ITEM' " table name
'SALES ORDER ITEM' " column heading
'8' " column width
' ' " fix column?
' ' " key
' ' " no display
' ' " sum this column
'X' " do not sum
' ' " input allowed?
' ' " currenct type field name
' ' " data type
'X'. " hotspot.
*column 10
perform sub_populate_fieldcatalog using:
'PSTYV' " field name
'T_ITEM' " table name
'ITEM CATEGORY' " column heading
'8' " column width
' ' " fix column?
' ' " key
' ' " no display
' ' " sum this column
'X' " do not sum
' ' " input allowed?
' ' " currenct type field name
' ' " data type
'X'. " hotspot.
perform sub_assign_events.
Create a Layout for the ALV
perform sub_layout.
Define the key fields that links the header & item tables
perform sub_define_key.
dispaly list
perform sub_call_list_display.
endform. " sub_display_alv
*& Form sub_populate_fieldcatalog
text
-->P_G_FIELDCAT text
-->P_0198 text
-->P_0199 text
-->P_0200 text
-->P_0201 text
-->P_0202 text
-->P_0203 text
-->P_0204 text
-->P_0205 text
-->P_0206 text
-->P_0207 text
-->P_0208 text
-->P_0209 text
-->P_0210 text
-->P_0211 text
-->P_0212 text
-->P_0213 text
form sub_populate_fieldcatalog using
l_fieldname
l_tabname
l_column_heading
l_outputlen
l_fix_column
l_key
l_no_out
l_do_sum
l_no_sum
l_input
l_cfieldname
l_datatype
l_hotspot.
t_fieldcat-fieldname = l_fieldname.
t_fieldcat-tabname = l_tabname.
t_fieldcat-reptext_ddic = l_column_heading.
t_fieldcat-outputlen = l_outputlen.
t_fieldcat-fix_column = l_fix_column.
t_fieldcat-key = l_key.
t_fieldcat-no_out = l_no_out.
t_fieldcat-do_sum = l_do_sum.
t_fieldcat-no_sum = l_no_sum.
t_fieldcat-cfieldname = l_cfieldname.
t_fieldcat-datatype = l_datatype.
t_fieldcat-hotspot = l_hotspot.
append t_fieldcat.clear t_fieldcat.
endform. " sub_populate_fieldcatalog
*& Form sub_assign_events
text
--> p1 text
<-- p2 text
form sub_assign_events.
refresh t_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 1
importing
et_events = t_event[]
exceptions
list_type_wrong = 1
others = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Read the record for the top-of-page event
read table t_event with key slis_ev_top_of_page.
if sy-subrc = 0.
t_event-form = g_formname.
append t_event.
endif.
endform. " sub_assign_events
*& Form SUB_LAYOUT
text
--> p1 text
<-- p2 text
form sub_layout.
clear x_layout.
x_layout-f2code = 'QUOTE'.
x_layout-zebra = 'X'.
x_layout-expand_fieldname = 'EXPCOL'. " Field for expand/collapse
*Stat
x_layout-colwidth_optimize = 'X'.
x_layout-no_totalline = 'X'. " 0001+
endform. " SUB_LAYOUT
*& Form SUB_DEFINE_KEY
text
--> p1 text
<-- p2 text
form sub_define_key.
clear x_keyinfo.
x_keyinfo-header01 = 'VBELN'.
x_keyinfo-item01 = 'VBELN'.
endform. " SUB_DEFINE_KEY
form top_of_page.
write :/10 sy-datum, 20 sy-pagno, 30 sy-uname.
endform.
form sub_user_command using f_ucomm like sy-ucomm
f_selfield type slis_selfield.
if f_ucomm = 'QUOTE'.
if f_selfield-fieldname = 'VBELN'.
Set Parameter id 'AUN' field f_selfield-value.
call transaction 'VA03'.
endif.
endif.
endform.
*& Form sub_call_list_display
text
--> p1 text
<-- p2 text
form sub_call_list_display.
call function 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
exporting
i_callback_program = g_repid
i_callback_user_command = 'SUB_USER_COMMAND '
is_layout = x_layout
it_fieldcat = t_fieldcat[]
i_save = 'A'
it_events = t_event[]
i_tabname_header = 'T_HEADER'
i_tabname_item = 'T_ITEM'
is_keyinfo = x_keyinfo
tables
t_outtab_header = t_header[]
t_outtab_item = t_item[]
exceptions
program_error = 1
others = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " sub_call_list_display -
I have been trying to increase my disk space for windows xp on my Imac and I am running parallels 6. before opening windows I go into configure in parallels and open the hard drive and try to move the allotted disk space from 32 gig to 64 or any other increased gig and then apply and I get the error message: resizing failed unable to resize last volume. The file system of this volume might be damaged or not supported. How do I increase the size?? I just also did a disk repair utility with Apple on the Apple side of my IMAC. Please Help!! I had uninstalled SQL server on the windows side and needed to uncompress files to install this and then I ran short on disk space.
This sounds to me that your Parallels XP file system is corrupted and not the OSX file system.
Have you checked the XP file system while running the Parallels XP yet ?
However, it would be better to ask such question in the Parallels Forum http://forum.parallels.com/
Stefan -
Unable to expand tree in safari 5.1.7 for windows
Hi,
I am using Safari v5.1.7 in Windows OS. There is a left navigational panel with tree structure in web content page. When I open web content in safari 5.1.7, I am unable to expand the tree. This happening with the pages which are carrying huge data. For the normal pages, I could able to expand the children of the tree.
Please anyone help on this.Above issue is an urgent issue. Any help would be appreciated. Thanks
-
Unable to Expand nodes under Migrated Content.
Hi all,
We have recently installed EP 7.0 and we have uploaded the Business Packages Specific to CRM 5.0.But under Migrated Content--> EP 5.0 I'm not able to drill down further.I'm able to see the Folders like Iviews, Pages,Roles etc..But I'm unable to expand these folders further.Like if I want to see all the roles present in the roles Folder i'm not able to do so.But the roles are present and I can see them if I search them in Identity management.
Can someone help me on this.
thanks and regards,
Vijaya Sai.VHi,
This folder would be empty in case of fresh install, i also have it empty.
The business package deployed sits under
Content Administration -- Portal Content -- Content delivered by SAP --
Hope this helps,
Chetan -
Unable to expand drop down by index UI element
Hi,
I have got one Drop down by index in my webdynpro form and I want to bind this to backend data. For this purpose, I created one adaptive rfc model and also did all this model binding, context mapping etc.
Now my context in view looks like this :- GetDropDown_Mn (parent node) , this has got child Output_DropDown which again has two value attributes Name and Text.
This is component controller code where you bind and invalidate
__Shell__Ca_Read_Cr_Drbox_Val_Input dropdown = new __Shell__Ca_Read_Cr_Drbox_Val_Input();
wdContext.nodeGetDropDown_Mn().bind(dropdown);
wdContext.currentGetDropDown_MnElement().modelObject().execute();
wdContext.nodeOutput_DropDown().invalidate();
I then tried to bind my UI element in view with Name attribute , but when I try to run my application , the field appears as read only, kind of non editable (blocked) and I am unable to expand my dropdown.
The readonly property of UI element is false. I have hard coded one value like " Please select from drop down list " and I want the backend values to come below this. For this, I have written code to append the backend values with the hardcoded value. Now the problem is my dropdown is blocked and not able to expand ( unable to click the arrow button), and I cannot see the other values in dropdown except the hard coded value.
Can someone please help me on this.
The cardinality of context node is 1..n, selection = 0..1 and I have set Leadselection = -1.
Thanks and regards,
SaiHi Sai,
You can use the below code to add the please select in ur drop down in wdInit() method
wdContext.nodeVn_Node().currentVn_NodeElement().setVa_Attribute("-Please Select-");
please use the name of node as u have created in the context.
and after that please check if yoy are getting values from RFC call or not.
if you are getting the values then try to change the selection property of that node to 1..n and comment the lead selection line that you have written.
hope this will help.
Regards
Narendra -
Unable to expand table (or 'any' object) node - permissions issue?
I am the dba for a database and hence have access to the system user. When I connect to the db through SQL Developer, I can expand the table node under any user and list tables. As I can with any object node.
I now want to create an admin user that has restricted capabilities, one of which will be to view objects, such as tables etc..
(I will ultimately do this via a role to allow multiple users to have the admin capabilities, but for now have just created an admin_user userid).
However, when I connect to the database using this admin_user userid, I am unable to expand any object node.
I have played with different permissions, granting 'select any dictionary', 'select_catalog_role', 'select on dba_tables' but the user still can not view any objects via the appropriate node. eg. attempting to go to Other Users - username - Tables just shows nothing. (There are no filters).
However the admin_user can run a SQL command to view the tables. eg. Select * from dba_tables, will list all tables for all users within the database. So they DO appear to have the appropriate access.
So why can't they see the tables in the tables node?
Is there some piece of configuration within SQL Developer itself that I have overlooked?
CheersI am the dba for a database and hence have access to the system user. When I connect to the db through SQL Developer, I can expand the table node under any user and list tables. As I can with any object node.
I now want to create an admin user that has restricted capabilities, one of which will be to view objects, such as tables etc..
(I will ultimately do this via a role to allow multiple users to have the admin capabilities, but for now have just created an admin_user userid).
However, when I connect to the database using this admin_user userid, I am unable to expand any object node.
I have played with different permissions, granting 'select any dictionary', 'select_catalog_role', 'select on dba_tables' but the user still can not view any objects via the appropriate node. eg. attempting to go to Other Users - username - Tables just shows nothing. (There are no filters).
However the admin_user can run a SQL command to view the tables. eg. Select * from dba_tables, will list all tables for all users within the database. So they DO appear to have the appropriate access.
So why can't they see the tables in the tables node?
Is there some piece of configuration within SQL Developer itself that I have overlooked?
Cheers -
Unable to expand permanent memory Error
Hi everyone,
When running the MIDlet I'm coding I get a java.lang.OutOfMemoryError with the fellowing message: "Unable to expand permanent memory".
I tried to raise the heap size of the WTK emulator but no change. And what is more annoying is that the debugger won't step into the offending method.
Do you have an idea on how to solve this problem.
CU JeromeThe runtime tells me that on a total of 512kb of memory 467kb are free.
The offending method is initializing some arrays and populating them.
CU Jerome -
Unable to expand...
hi,
i've just installed sqldeveloper 1.2.1-32.13 on mac os x 10.4.11.
it's the first install for me, first install on this machine.
when connected to a database, in the left column of the main window i'm unable to expand virtually all of those nodes (tables, views, ...):
click on the triangle next to "tables", it opens a dialog "loading tables..." which then instantly disappears. no tables are being listed, and the triangle i just clicked on also diappears. no more clicking on that node possible. same is for views, indexes, ...
the db connection appears to be fine, since i can type a sql select command (on the right) and get a valid result.
i have the J2SE 5.0 set as primary java application runtime version. i have 1.5.0_07 which appears to be the latest release for os x (?).
any idea what's wrong?
thanks for your feedback.i get no messages in the system console, but launching from terminal shows a java exception:
Exception in thread "ProgressBarThread" java.lang.NoSuchMethodError: oracle.jdbc.OraclePreparedStatement.setStringAtName(Ljava/lang/String;Ljava/lang/String;)V
at oracle.dbtools.db.DBUtil.bind(DBUtil.java:746)
at oracle.dbtools.db.DBUtil.bind(DBUtil.java:1096)
at oracle.dbtools.db.DBUtil.executeOracleQuery(DBUtil.java:471)
at oracle.dbtools.db.DBUtil.executeQuery(DBUtil.java:498)
at oracle.dbtools.raptor.navigator.ObjectQueryInstance.executeQuery(ObjectQueryInstance.java:73)
at oracle.dbtools.raptor.navigator.xml.XmlFolderInstance.getChildren(XmlFolderInstance.java:121)
at oracle.dbtools.raptor.navigator.xml.XmlFolderInstance.listChildren(XmlFolderInstance.java:67)
at oracle.dbtools.raptor.navigator.ObjectFilter$1Loader.doWork(ObjectFilter.java:144)
at oracle.ide.dialogs.ProgressRunnable.run(ProgressRunnable.java:159)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:553)
at java.lang.Thread.run(Thread.java:613)
apparently it can't display the progressbar. but why? -
Unable to expand Tree in EP (e.g. Portal Content)
Dear Portal Gurus,
We are on EP 6.0,SP12.
We are unable to expand any tree structure (including stanadard Tree Structure) inside EP.
I get the following message :
Could not load or refresh node Tree creation failed on node: pcd:portal_content .
Pls let me know what needs to be done.
Thx.when I exported a transport package I saved it on Portal conect and after doing all the transporting, when I opened the content administration and try to expand the portal content, I get the following error:
Could not load or refresh node Tree creation failed on node: pcdportal_content
<a href="http://ing.perez.googlepages.com/portal.jpg" target="_blank"><img src="http://ing.perez.googlepages.com/portal.jpg" border="0" /></a>
I get this error from the log
1.5#0011856BDDE1006D00000086000011B000042238FAC1E7DA#1163528027322#com.sap.portal.pcd.Gl.Notification.Engine#sap.com/irj#com.sap.portal.pcd.Gl.Notification.Engine#IENAFS02#197##091402wb79_EPD_2059550#IENAFS02#0a01e440740b11dba4e00011856bdde1#Thread[T-IMPORT-1114_121327_931_71801fdd2c1d2d9b,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error#1#/System/Server#Java###[XfsNotificationEngine.register] Exception occured:
[EXCEPTION]
{0}#1#PcdRuntimeException: SQLException is not transient, error code = 0, sql state = HY000
[SAP_NWMss][SQLServer JDBC Driver]IO Error creating temp file: null
com.sapportals.portal.pcd.pl.PlRuntimeException: SQLException is not transient, error code = 0, sql state = HY000
[SAP_NWMss][SQLServer JDBC Driver]IO Error creating temp file: null
at com.sapportals.portal.pcd.pl.PlFactory.handleUnexpectedSQLError(PlFactory.java:2428)
at com.sapportals.portal.pcd.pl.PlFactory.checkDeadlockResolution(PlFactory.java:2436)
at com.sapportals.portal.pcd.pl.PlContext.lookupSubtree(PlContext.java:280)
at com.sapportals.portal.pcd.gl.xfs.XfsContext.<init>(XfsContext.java:128)
at com.sapportals.portal.pcd.gl.xfs.XfsContext.<init>(XfsContext.java:85)
at com.sapportals.portal.pcd.gl.xfs.XfsContext.getXfsChildFromPlChild(XfsContext.java:590)
at com.sapportals.portal.pcd.gl.xfs.XfsContext.readXfsObjectFromPersistence(XfsContext.java:535)
at com.sapportals.portal.pcd.gl.xfs.XfsContext.getChildAtomicName(XfsContext.java:433)
at com.sapportals.portal.pcd.gl.xfs.XfsContext.getChild(XfsContext.java:277)
at com.sapportals.portal.pcd.gl.xfs.XfsContext.getChild(XfsContext.java:280)
at com.sapportals.portal.pcd.gl.xfs.XfsContext.getChild(XfsContext.java:280)
at com.sapportals.portal.pcd.gl.xfs.XfsContext.lookup(XfsContext.java:228)
at com.sapportals.portal.pcd.gl.xfs.notif.XfsNotificationEngine.triggerInformDanglingDeltalinks(XfsNotificationEngine.java:463)
at com.sapportals.portal.pcd.gl.xfs.notif.XfsNotificationEngine.register(XfsNotificationEngine.java:302)
at com.sapportals.portal.pcd.gl.transport.PcdGlTransportAdapter.endElement(PcdGlTransportAdapter.java:346)
at com.sapportals.portal.pcd.gl.xml.ContentHandlerManager.endElement(ContentHandlerManager.java:204)
at com.sapportals.portal.pcd.gl.xml.PcdXMLContentHandler.endElement(PcdXMLContentHandler.java:107)
at com.sap.engine.lib.xml.parser.handlers.SAXDocHandler.endElement(SAXDocHandler.java:154)
at com.sap.engine.lib.xml.parser.XMLParser.scanEndTag(XMLParser.java:1913)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1809)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2792)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:227)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:141)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:156)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:259)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:278)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:340)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
at com.sapportals.portal.pcd.gl.xml.PcdXMLParser.parse(PcdXMLParser.java:85)
at com.sapportals.portal.pcd.gl.xml.PcdXMLParser.parse(PcdXMLParser.java:54)
at com.sapportals.portal.pcd.gl.transport.PcdGlTransportManager.importObject(PcdGlTransportManager.java:612)
at com.sapportals.portal.transport.Transport.importObject(Transport.java:110)
at com.sapportals.portal.transport.app.ImportRunner.importObject(ImportRunner.java:322)
at com.sapportals.portal.transport.app.ImportRunner.run(ImportRunner.java:164)
at java.lang.Thread.run(Thread.java:534)
Caused by: java.sql.SQLException: [SAP_NWMss][SQLServer JDBC Driver]IO Error creating temp file: null
at com.sap.nwmss.jdbc.base.BaseExceptions.createException(Unknown Source)
at com.sap.nwmss.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.sap.nwmss.jdbc.base.BaseImplClobEmulated.<init>(Unknown Source)
at com.sap.nwmss.jdbc.sqlserver.SQLServerImplResultSet.getData(Unknown Source)
at com.sap.nwmss.jdbc.base.BaseResultSet.getClob(Unknown Source)
at com.sap.sql.jdbc.basic.BasicResultSet.getClob(BasicResultSet.java:432)
at com.sap.sql.jdbc.direct.DirectResultSet.getClob(DirectResultSet.java:1060)
at com.sap.sql.jdbc.common.dispatch.ClobResultColumn.getClob(ClobResultColumn.java:138)
at com.sap.sql.jdbc.common.CommonResultSet.createClob(CommonResultSet.java:1035)
at com.sap.sql.jdbc.common.CommonResultSet.getClob(CommonResultSet.java:302)
at com.sap.sql.jdbc.common.dispatch.ClobResultColumn.dispatchGetString(ClobResultColumn.java:114)
at com.sap.sql.jdbc.common.CommonResultSet.getString(CommonResultSet.java:448)
at com.sapportals.portal.pcd.pl.AttributeHeadersTable.readStringValue(AttributeHeadersTable.java:934)
at com.sapportals.portal.pcd.pl.AttributeHeadersTable.readFirstValue(AttributeHeadersTable.java:657)
at com.sapportals.portal.pcd.pl.AttributeHeadersTable.readAttributeHeader(AttributeHeadersTable.java:639)
at com.sapportals.portal.pcd.pl.AttributeHeadersTable.selectSubtreeObjectsAttributeHeaders(AttributeHeadersTable.java:762)
at com.sapportals.portal.pcd.pl.PlFactory.getSubtreeSegment(PlFactory.java:878)
at com.sapportals.portal.pcd.pl.PlFactory.getSubtree(PlFactory.java:804)
at com.sapportals.portal.pcd.pl.PlContext.lookupSubtree(PlContext.java:253)
at com.sapportals.portal.pcd.pl.PlContext.lookupSubtree(PlContext.java:274)
... 33 more -
Like the topic - "Yosemite is awful- unable to empty trash, volume options are haywire, error codes on file management, and files won't replace when moved. What are my options at this point?"
I installed this OS, and it looks nice, but it's terrible to use. I randomly have the volume controls get disabled, and sometimes the volume menu in the system tray does nothing when adjusted which I've never seen in an OS before. The trash won't empty. When I try to drag and drop newer files over existing ones, nothing happens. The old ones just stay there. I have to delete the old ones and then move the new ones. And when I go into the protected files to manage audio plugins (I make music), the first thing I hit are error codes galore, and password prompts that either don't popup when they should, or don't execute the command after I provide my password.
What can I do now that I installed the flames of **** onto my computer?Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
My MacBook Pro speakers are stopped working and on screen volume icon shows in gray colour I am unable to change the volume.
Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
Highlight Internal Speakers.
Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 times to flip the microswitch inside.
Sound output may be stuck in the digital mode.
Try this even if you don’t see the red light.
3. Reset PRAM. http://support.apple.com/kb/PH14222
Do this twice
4. Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
Audio Devices window
Side Bar
Click the Built-in Output.
Under Mute any of the boxes checked? If so,uncheck it.
6. System Preferences > Sound> Sound Effects
Play sound effects through:
Select "Internal speakers" and then back to "Selected sound output device". -
I am unable to adjust the volume level. The slider bar goes to the maximum volume even after I try to adjust it lower.
Try the standard fixes:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup
- Restore the iPod to factory defaults/new iPod. -
my itouch 4th gen refuses to switch off and i am unable to change the volume. Can you help?
- Have you tried resetting the iPOd:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next connec the iPod to its syncing computer and try to restore the iPod.
- The if still same. place the iPod in recovery mode and then try to restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
Maybe you are looking for
-
How do I prevent a cookie from attaching itself to my data?
Particularly, wallstreetnews.com. This is an especially annoying tracking cookie, as it blocks any navigation to what I was originally doing at the time of its obnoxious arrival. I can`t do anything in that current window that I want to unless I mini
-
JTable: How to reference the selected row during a drag?
I am implementing Drag and Drop on the rows of a JTable. I want to change the background colour of each successive JTable row ("highlight" the row) as another row is dragged over it (I already have similar functionality implemented in a custom TableC
-
Is there a switch I can use with thunderbolt display and 2 computers
I have the new Mac Mini and the new Macbook Air plus the 27 inch thunderbolt display. The majority of the time, I will be using the thunderbolt display hooked up directly to the Mac Mini. I have already tested the theory that if I turn off the Mac
-
Hello Everyone, First, I would like to say Arch is the best distribution I have ever worked with (Debian, Gentoo, Mint, Ubuntu, etc)! Putting that aside, I am relatively new and would like some assistance on setting up link aggregation for 2 comput
-
Announcing New! Oracle Policy Automation Connector for Oracle CRM on Demand
Hi all, We are very pleased to announce the immediate availability of the new OPA connector for Oracle CRM on Demand. You can find more information and the link to download this connector on the OPA pages on OTN here: http://www-content.oracle.com/te