Unable to export from QT Pro after 10.5 "upgrade"

I am trying to export an audio file using QuickTime Pro. I used to be able to open an mp3 and then export it as an AIFF. After "upgrading" to 10.5 I get an error message that says: You do not have sufficient permissions for this operation. I have run "repair permissions" from Disk Utility. I have read and write permission on the disk I'm trying to write to. I have permission to read and write the file.

I suspect you have some other sort of permissions problem, rather than a QuickTime problem. Try opening some small mp3 file, then export it as an aif file to your Desktop. Does that work? Can you copy that file from your Desktop to the other drive? How about opening a file and then doing a simple "Save as..." to the other drive? Does that work?
Francine
Francine
Schwieder

Similar Messages

Film looks poor after exporting from prem pro 5

Hi
My film seems to lose quality (looks like it is dropping frames, picture seems to pixelate slightly in places) after I have exported from prem pro. I have tried messing with the settings but it still seems to lose a signifcant amount of quality.
I want to export to AVI.
Any tips?
Thanks

OK... here are specific questions... answer them all and someone will be able to help
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
More information needed for someone to help http://forums.adobe.com/thread/416679
Some is general about your computer and OS, some is specific to video editing
Build a Configuration file http://www.piriform.com/speccy
Brand/Model Computer (or Brand/Model Motherboard if self-built)
How much system memory you have installed, such as 2Gig or ???
Operating System version, such as Win7 64bit Pro... or whatevevr
-including your security settings, such as are YOU the Administrator
-and have you tried to RIGHT click the program Icon and then select
-the Run as Administrator option (for Windows, not sure about Mac)
Your Firewall settings and brand of anti-virus are you running
Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
-or the brand/model graphics chip if on the motherboard
-and the exact driver version for the above graphics card/chip
-and how much video memory you have on your graphics card
Brand/Model sound card, or sound "chip" name on Motherboard
-and the exact driver version for the above sound card/chip
Size(s) and configuration of your hard drive(s)... example below
-and how much FREE space is available on each drive (in Windows
-you RIGHT click the drive letter while using Windows Explorer
-and then select the Properties option to see used/free space)
Windows Indexing is BAD http://forums.adobe.com/thread/676303
While in Properties, be sure you have drive indexing set OFF
-for the drive, and for all directories, to improve performance
Some/Much of the above are available by going to the Windows
Control Panel and then the Hardware option (Win7 option name)
OR Control Panel--System--Hardware Tab--Device Manager for WinXP
And the EXACT type and size of file that is causing you problems
-for pictures, that includes the camera used and the pixel dimensions
Plus Video-Specific Information http://forums.adobe.com/thread/459220
Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549
Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
Read Hunt on Using MOD/TOD files http://forums.adobe.com/thread/699990
Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link
Also read file troubleshooting http://kb2.adobe.com/cps/407/kb407928.html

Losing audio quality when exporting from premiere pro

I have now had this happen with two different videos. I play the video in premiere pro and the audio is fine. I export the video and lose most of the quality of the audio portion. One project is a music session when exported I only get the main vocal the drums aren't audible only a buzz sound is made where the kick drum would usually come in. On another project is a thank you video for a family member and the audio is distorted after being exported. The audio sounds fine inside of the session. Once exported the audio will still work fine on my computer and my iphone 5s as long as I'm wearing headphones, once I try to play the video through my iphone 5s speakers the audio quality is gone, making the noises as previously stated. My iphone can still play other tracks fine but videos and audio exported from Premiere Pro are distorted. Any advice on how I can export the video so I wont lose audio quality when playing the video on an iphone? I know it's not my iphone speakers, they play other songs just fine.

The source files as far as the audio goes are wav files that I've pulled off of my desktop. My sequence settings are 1920 by 1080 at 29.97 frames per second. The export settings are H.264 with the preset YouTube (HD 1080 29.97 FPS) and I've also tried HD video 1080p 29.97 FPS. If this isn't enough information please let me know I'm in the learning phase. Audio wise the quality is set to high and I'm exporting at 4800 kh and a bit rate of 190. I've also tried a bit rate of 320 and 264 I think it is and still had the same problems. Let me know if I need to do screen shots I really want to figure this out.
Thanks for your help!

Anyone unable to print from Mac Pro using lion 10.7.2 to HP LaserJet M1319f mfp

I'm unable to print from Mac Pro using lion 10.7.2 to HP LaserJet M1319f mfp. The HP website says that the HP LaserJet M1319F MFP is compatible with Lion 10.7.2. Every time I try to perform a Test print I get an Error msg. I'm using driver version 1.3.0.261

https://discussions.apple.com/message/23765195#23765195

Media Encoder crashes when exporting from Premiere Pro

Media Encoder crashes when exporting from Premiere Pro. I am queueing multiple files for export and Media Encoder will crash. The computer system has 32GB of RAM and the videos export fine in Premiere, but that requires exporting each one individually. Each video file is being down converted and some can be quite long (upwards of 3-5 hours). Nothing else is running on the computer that would take up memory.
Any idea why Media Encoder will crash?

Try turning off GPU acceleration.

I am using reader 11.0.10.32 Win7 64 bit. I am unable to print from Reader. After selecting print all pages, the pri

I am using reader 11.0.10.32 in Win7 Professional 64 bit. I am unable to print from Reader. After selecting print all pages, the progress bar goes through the proper page count. After that a pop up window appears with the message: The document could not be printed. After pressing the OK button that pop up closes and the next pop up window appears with the message: There were no pages selected to print. After pressing the OK button, the pop up closes and the pdf document is still visible in Reader.
I can print from other programs to that printer. I can print from Reader to other printers.
I was able to print to all printers before. I uninstalled Reader and reinstalled it from the Adobe web site.
Any suggestions to make it print?
Thanks.

Answered multiple times every day: open Adobe Reader | Edit | Preferences
under Documents, change 'View documents in PDF/A mode' to Never
under Security (Enhanced), disable Protected Mode at startup

Exporting from Premiere Pro CC 2014

Hello there,
Every time that I am willing to export my project my Premiere Pro CC 2014 stop responding all together. I tried the short cut (Commend+M) or going through the Manu bar. the result is the same, Premiere Pro CC 2014 just freezes and does not respond to anything till I force quit it and restart it allover again. I tried exporting from Premiere Pro it self, without using Media Encoder, but the problem remains the same.
I am using the new Mac Pro. I heard Adobe Premiere Pro is experiencing problems with the New Mac Pro. Is that true? Or is there other issue?
Thank you and looking forward to hear back,
Maruf

Hi Maruf,
Maruf Noyoft wrote:
Kevin,
I reset as you suggested and it took care of it.
Great!
Maruf Noyoft wrote:
So, if you don't mind explaining me the cause of the problem that I had? Or
an article about it. It is just for me for getting to know better the program and the system.
Thank you very much and appreciate your help enormously.
Since preference files get touched by the application frequently, there is always the possibility of their corruption. When this happens, you start to see what we call "unexpected behaviors" from Premiere Pro. This problem happens infrequently, but it is a good first troubleshooting step to try on your own. This is the case with most every non-linear editing application I have used over the years (Final Cut Pro, Avid, Media 100, etc.).
Thanks,
Kevin

Exporting from Premiere Pro into Story

Can the metadata etc be exported from Premiere Pro into Story.
For example in the process of roughing out a documentary idea I'm shooting clips and making subclips in bins and developing sequences in this rough style. It would be useful to document this in Adobe Story if such an interface exists thanks...
Many thanks

The closest I can find is here:
http://helpx.adobe.com/story/help/workflow-movies-script.html
Seems like there is a semi-manual solotion ... has anyone used this reverse workflow in anger I wonder and can describe their experience, the results and the potential?

Why remove .flv export from Premiere Pro CC 2014? And what's a good workaround?

Why remove .flv export from Premiere Pro CC 2014? And what's a good workaround?

OK, so you want to put it on your own web page. That's fine as long as you know how to create a web page.
The next thing you have to decide is how big do you want the video to appear on the web page. Many people just post on YouTube and then embed the video into their web page. That way, the video can take advantage of all of the various sizes that YouTube provides.
In any case, I suggest that you use H.264. But the data rate depends on the size of the file. If you are going to display it in HD, then you probably want to start at about 20Mb/s and go up or down from there. The required data rate depends on what you find acceptable, and that depends on the amount of movement in the video. For example, a talking head next to a white board explaining something requires a lot less bits to represent the image because less changes are taking place from frame to frame. If you use 10Mb/s for that, you might find 20Mb/s or more is required to make you happy if you shot a football game from the sidelines.
I generally use settings that look like this image. If you have any questions as to why I choose these settings, feel free to ask.

Why can't I export from Premeier Pro CS5 to Encore CS5?

I have edited, renderred, and attempted to export to Encore to attempt to transfer to DVD
Premiere Pro CS5.5 with 5.5.2 update just downlaoded today
Windows 7 64 bit
Source AVCHD 1080p 25 Anamorphic
Error: ..\..\src\AMEPresetProber.cpp-265
I wasa exporting from Premiere Pro to Encore
This HAS worked before
No other software running
No other codecs loaded, that I know of
AMD Phenom IIx4 955 processor
No Mercury...Acceleration

Hi Devongeoff.
Thanks for your post. This error will not come if you try to change the user account or create a new user account. Once the Project is finished, uninstall all the adobe application and use cleaner tool and re-install them once again.
Regards,
Vinay

My computer crashes when I export from Premiere Pro cc.? Also, is there a known problem with Panasonic HC-V720 footage?

Why does my computer crash when I try to export from Premiere Pro cc? Also, is there a known problem with footage from Panasonic Hc-v720?@

Ask in http://forums.adobe.com/community/premiere/content
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll

Exporting from Soundtrack Pro - Trouble

I am having problems exporting from Soundtrack Pro. I haven't had these problems before.
I have tried to export a track to MP3 and to Compressor but all I get is the Exporting window and that's as far as it goes. It says, 'Time Remaining: Estimating...' but then that's it. I had even left it for a few hours and still nothing happened.
The program isn't frozen, just the export isn't working. Is this a common problem? Can it be fixed?
Many thanks.

I have the same problem...
I finished working on a project and when I tried to export it - it would start out just, tell me that it would be done in less than a minute and the just suddenly stop 1/4 of the way for no reason. Same thing happens whatever I do - in the same exact place. I spent a lot of time finishing this edit so I really want to get it back to FCP.
Can anyone help?

Help Needed : Video Glitch after exporting from Premiere Pro CC

Hi all ,
            I have been experiencing this issue for sometime now. I occasionally encounter a video glitch after exporting a video from Premiere Pro CS6 or CC. Sometimes it happens in my NLE timeline , which I have to remove the affected clip that has the glitch/flicker problem from my bin and re-import the clip from my original source, which solves the problem.
             However , the worst part is when the glitch/flicker happens when I have already exported the video when everything seems fine in the timeline of Premiere . My sequence settings do match with the clip . This issue happens intermittently as I always have to hope for the best when the video exports.
Here is an Example of what I mean, the glitch/flicker happens at 3:28 of the music video.
             Hopefully those who have the same issue can share how to troubleshoot this problem . Thank you.
Regards,
Elias Lo

what i did was install final cut pro. I dont have an answer for this but it finish my problem , how i came up with this idea well i have the new mac pro cilinder that looks like a trash can 64gb memory and all the toys to work fast but again the mov files cannot be seen in the desktop cause premiere and mac and windows and all this ******** they fight about , and i also have your problem big time o pn every export.
i have instal final cut onmy older slower imac and i can see everything and the export are perfect
so i just did that and its perfectly fine basicaly final cut does something that makes ur computer and adobe read all kinds of files frames format.   i try to explain this to this adobe premiere enginners but they just say uuuuhhhhh

Is there a way to set a default "Source Range" in AME when exporting from Premiere Pro CC?

When exporting a sequence from Premiere Pro CC, you are able to toggle between 4 drop down options within Adobe Media Encoder on what Source Range you'd like to export (Work Area, Sequence In/Out, Entire Sequence, Custom) as seen here:
Is there a way to set the default Source Range to something besides Sequence In/Out?
My reason for asking is that sometimes I export multiple sequences at once using AME's Queue. I add my custom presets to each Sequence and hit export, but SOMETIMES I may have accidentally marked an in point on my timeline and by default it's set to export only that In-to-Out part of the sequence.
I know what you may be thinking...well, just don't add any In/Out points to your sequence on the timeline or clear them first. The trouble is that I often don't see them or catch them when working quickly. In Premiere Pro CC, I use the "Lighter Brightness" Appearance setting because it's easier on my eyes after editing 10 hours a day, 6 days a week. Sure, darker looks cooler, but it kills my eyes for some reason. Anyway, PPro CC has a troublesome appearance issue in CC where it's not "optimized" for editing when you change it to a lighter appearance like it was in CS6. I've already contacted Adobe about this and another appearance issue (involving highlighted clips when in Lighter Appearance setting) and they are "actively working on fixing this appearance issue asap".
For reference, here's Premiere Pro CC in/out points in default dark appearance (notice the slightly lighter grey area):
Now here's that same in/out in "Lighter Appearance":
Not exactly optimized. Can hardly see it. Good luck spotting that little guy on a long timeline. Sadly, this affects in/out points in the Source Window as well. Really hard to see.
Conversly, CS6 looked the best (the blue REALLY stands out making things easy to see):
So my question again...is there a way to set the default "Source Range" to something else besides Sequence In/Out so that I don't end up doing what I just did and leaving for several hours while batch exporting only to come back and find that I exported only a "portion" of one of my big sequences?
Thank you!

shooternz wrote:
Here is the solution: Slow down. Give your project some love. Smell the roses.
Agreed about the roses but alas my next project always calls. Actually, I think what happens is I give each project SO much love that when it comes to exporting, I've run out of time.
shooternz wrote:
Then it would not be a default...it would be an option and you already have that option.
Semantics aside, I would love to be able to have it at least default to whatever option was last chosen. Or, perhaps I shouldn't use the word default again...I'd love it to simply remember my preferred setting. That's all.

Trimming HD video files for export from Windows to After Effects on a MAC

Hi,
I have some .MTS files created using 2 HD camcorders:
1) Panasonic HDC-TM700 which shoots full HD @ 1920 x 1080 and
2) JVC Everio GZ-HM550 which shoots the same HD resolution
I am working with PP CS5 on Windows 7
I need to trim some small pieces (5 -10 seconds) out of many of the .MTS files to send to someone using After Effects MAC and FC Pro
In trying to keep the highest HD resolution of 1920 x 1080, the number of choices to select when creating a new sequence and then when exporting from PP is confusing.
Note: I notice that 2 clips I have in my PP project bin at the same time have different frame rates which I believe that 1 each came from my different cameras:
file 1) 29.97fps 48000hz compressed stereo
file 2) 59.94fps 48000hz compressed 5.1
Can anyone guide me here on sequence and export settings & codecs to maintain the HD resolution and least loss of quality on export?
Will the 2 different frame rates prior to export cause any issues? I'm assuming PP will re-interpret for output.
Thanks

> I understand the files are not compressed.
You misunderstand. The files are compressed. But they're compressed without losing any information. Losslessly compressed movies are a lot smaller than uncompressed movies---but they're still bigger than movies compressed with a lossy codec that would be more suitable for final delivery and distribution.
> How long are the movies your associate sends you and approx what do file sizes look like?
I tend to work on individual clips that are from several seconds to a few minutes long. They're usually a small number of GB each. Don't fret about large file sizes for intermediate files. Making movies small matters when you're streaming them for final delivery, not when you're handing over a hard disk or using an FTP server to exchange files for post-production work.

Unable to export from QT Pro after 10.5 "upgrade"

Similar Messages

Maybe you are looking for