Unable to export tdr files to pdf.

I am using DIAdem 10.2 and windows XP 64 bit. When I attempt to export pdf DIAdem freezes and becomes non responsive. No error messages occur. The same thing occurs for HTML export. The file sizes are typically in the 2-3GB a piece range but the same problem occurs when trying to export a single 2d graph, I used the time speed data from the start up example. Any help with this would be great as the files are too big to be carried around on a thumb drive.
Thanks Ed

Hi edmiles55,
DIAdem is not officially supported on Windows XP 64 bit. This is mentioned in the DIAdem readme file under System Requirements:
Operating Systems
- Windows 2000, Service Pack 4 or later
- Windows XP Pro, Service Pack 2 or later
- Windows Vista 32 bit
- Windows Vista 64 bit (as 32 bit application)
This might be why you are experiencing this issue. Oftentimes on an unsupported OS, a lot of the functionality will work, but not all of it.
Jervin Justin
NI TestStand Product Manager

Similar Messages

Unable to Export the document in PDF

Hi,
Can any body guide me what general authoriztions settings are needed for a user to export the markeing documents in PDF.
bcz the user at remote location client is unable to export the douments in PDF.
Regards
Srini

HI
You need to go the authorization windows and in the search box please type "PDF" that would take u to the option that u are seeking then u can assign full read only or no authorizations as per your requirement .
also make sure that the path has been correctly defined for pdf files
Regards,
Manish
Edited by: manish.malik on Jul 1, 2010 12:50 PM

Exporting CS5 file to PDF causes the document size to enlarge on PDF!

I need help... FAST! I have a 14-page 4CP calendar that bleeds on three sides. The bleed size is 3/16", per the printer's requirements. When I export the file from InDesign to PDF, the overall page size is increased by exactly 3/16"! I nearly missed this and approved the job for printing. Luckily, I turned on the rulers in the PDF file to double-check all the page elements were properly placed and wouldn't fall on the fold. That's when I discovered that objects that I had placed on a page were extending into the fold and onto the next page. I went back to my InDesign file and found that those elements were properly placed and did not extend into the fold as they were doing in the PDF file. I tried different PPDs, exporting the file with and without printer's marks... all to no avail. I finally printed the file to a Postscript (PS) file and then exported that file to PDF and got it to work. However, I would prefer to avoid that extra step. What is going on? Why is the file enlarging (coincidentally the EXACT same amount that the bleed was set for) and/or what am I doing wrong? Any help would be GREATLY appreciated!

Are you familiar with bleeds etc? i.e. have you used them before? It sounds to me as if you're doing everything mostly right but not realising that Acrobat and Reader (please don't mention Mac Preview) show the size including the bleeds when you choose those options upon export from Indesign.
Go back and check your document setup. Page size should be excatly just that, finished page size. Bleed settings (you might have to tick more options to see them) should be also just that. Export the PDF, go to 'Marks and bleeds' tick 'Use Document bleed settings' and you're done. The document will appear bigger.
oh and use the camera button for screenshots.
You can see the actual size of the doc by going Advanced > Print Production > Crop Pages and toggling between TrimBox (the size the page will get trimmed to) and CropBox (which includes the bleeds and is what displays).

I have trouble exporting indesign file as pdf.

I have trouble exporting indesign file as pdf. I need help please.

Hi,
Please start by telling us what happens when you try, and also how you are exporting the file.
Regards,
Malcolm

I am unable to convert certain files to pdf with Adobe Acrobat 8 Professional

I am unable to convert Word & PowerPoint files to pdf. (I am able to convert image files & excel)
I have enable macros in Word and still cannot convert the file.
I am getting the error popup:
Unable to open the document
Please check to see if you have read permission for the above file
I am running:
Windows XP Professional Ver 2002 SP 3
Adobe Acrobat 8 Professional
Microsoft Office 2007

Open the document in WORD or PPT and print to the Adobe PDF printer. With PPT, you will have to select the fill page option. You may also be able to use PDF Maker in WORD or PPT. From your post I am assuming you are trying to open directly in Acrobat and all of these other things have to be working properly before the latter will work. If they work and you still can not open directly in Acrobat, then try a repair on Acrobat.

Exporting InDesign files to PDF containing Chinese characters

When I export a file from Adobe InDesign to PDF that contains Chinese characters, some of the Chineset text in the resultant PDF appears heavy and blotchy, like it has had a very heavy stroke applied to it, even though the text is perfectly OK in the source InDesign file and when printed out from the PDF.
As a lot of Chinese reader will view and read this document online, I need to find a solution, can anyone help me?

Below is a screenshot of one of the effected pages
As you can see, some of the Chinese characters appear all heavy and blotch, whilst others are OK.
There is no leading on any of the text and it is perfectly OK when viewed in the Adobe InDesign file.

!! Exporting SWF file in PDF reduces image quality.

Hello,
I have a file with many multi-state picture frames and buttons for them. I export it in pieces in SWF format, then I put the SWF's back in the document as a new layer and export as interactive PDF. Finally everything worked fine, except that PDF opens in a larger then normal zoom and when zooming in on pictures the quality is very poor I am guessing 72ppi at the intended zoom. I check the SWF file and see that its image quality is good when zoomed, so the problem is with the way the PDF has exported the SWF.
notes: I made sure the settings were to export at 300ppi and high image quality. When I take a single multi-state frame with its associated button and export to SWF then PDF the image quality is maintained.... however I have over 150 image frames, so I rather not export them individually. Please, please reply... any suggestions will be gratefully excepted.

edit your image in photoshop and experiment with various settings/size. there's no magic high quality small file size setting.
it's a trade-off. the higher the quality and the greater the image dimensions, the greater the file size. you have to decide where those are acceptable.

Unable to Save AI files as PDF's in Illustrator CS 4

I am having problems saving my ai files as PDF's in Illustrator CS 4. I was working fine the other day. I save as PDF and the PDF saving dialogue box doesn't show up and I'm unable to click on anyhing until I hit the "escape" key. I have installed all my Adobe updates but still no success. Does anyone have any suggestions on how to fix this problem?
Thank you very much.

Dude you were spot on...I use two monitors when at home and for some reason the dialogue box won't pop up on screen just when I'm using my laptop. Thanks for your reply...it was driving my crazy

Export Keynote files as pdf

I've just updated Keynote 5 1 1. When I export a keynote file as PDF I get the PDF slides in wich the date of creation showed. how can I avoid this feature?

I can't remember if this is possible or not as I don't have a Mac available to check, but…
You can add a folder to the PDF Services menu by adding an alias to your Dropbox folder in the PDF Services folder in your Library. That folder will show up in the PDF popup menu in the print dialog.
Then, try to create an Application Shortcut with the name that shows up in the PDF popup menu.
You'd then have to Cmd-P to bring up the dialog, then type the shortcut you made for the PDF menu item.
The first part has worked in the past, but I'm not sure where the PDF Services are stored in Mavericks.
The second part, creating the shortcut to the PDF Services menu, I only think works. I vaguely remember reading that it can be done, but as I stated earlier, I don't have a Mac available right now to verify.
As an alternative, you might be able to create an Automator Service that gets the selected message, converts it to pdf, and saves it into your Dropbox folder. Without a Mac, I don't think I can effectively describe how to build that. If you haven't got this solved in the next couple of weeks, I might be able to work out the Automator method.

Unable to export a report to pdf but it can be exported to .xlsx

Hello,
I created a report layout as per my specifications
after I try to export it to an .xlsx and it successfully exports to it with all the data
Now I try to export it to a .pdf but I get the error as "Failed to load a document"
I am using google chrome as the browser
i also tried using different browser but still no luck
I ll appreciate if someone can help me
Thanks,
karan

are u able to preview pdf output instead of export , r u able to preview the output using plugin ??
are you having huge data ?

Unable to convert text file to PDF

Hi,
Using Adobe Pro 9 Distiller on Windows 2008 64bit server. So far using Distiller to convert .eps files to .pdf with Standard job options file. I need to convert a .txt file to .pdf and am not able to convert using any of the OOTB job options settings that came with Distiller product installation.
Below is the Distiller output when I tried with Standard job options settings
%%[ Error: undefined; OffendingCommand: MBLDxxxx-03.rpt ]%%
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
Can anyone please provide me settings or job options file settings to convert reports in text format to PDF? Thanks in advance.

Thanks for the quick response. I was able to generate the PDF using the Adobe PDF writer by opening the text file. Not an issue on 64 bit platform. The .NET application using Distiller to convert eps to PDF via Distiller and moves it over to a watch folder. Another application picks it up and bursts the large PDF to individual PDFs. I need to automatically convert txt to PDF and submit it for burst. Looking for ways to leverage Distiller to automatically convert the txt to PDF. Is it possible? Thanks.

When I export InDesign file to pdf, my graphics are negatives.

I'm using Adobe CS4 and I've got greyscale photoshop elements in the layout. When I export to pdf, for some reason, those psd's become negatives of what they are in my InDesign file. I've gone through my file to see what setting is off on the images & in the Export settings and I just can't pinpoint the problem. HELP!!

Sorry. I just remembered that that was not accurate.
I believe it was jpegs exported from CorelDRAW that were negative when viewed on Mac...
Harbs

Difficulty exporting InDesign file to PDF

I am an InDesign newbie, using CS4 on a Mac. I have inherited a 16-pg InDesign document that was created by a graphic designer from his home (also using a Mac); he is no longer with our company and is not available for advice. We are trying to replace fonts he used in the document, plus some links are missing. The designer turned over most of his files before leaving but did not package the documents.
The problem: There are several instances in the document where a layered graphic element (with text on top) overprints when the file is exported to PDF, covering the copy. (I've tried all variants of PDF - from high quality to small - and it does it every time). When I check the file in InDesign, it looks OK, until I click the Overprint Preview command; then I see the way the image bleeds over onto the text, but I don't know how to tell it not to do this! I'm new to InDesign and am not sure how to change settings for elements. I have tried to click on this layered element to select it & find out its attributes and properties, but nothing happens when I click. I have been able to change the font for the top text layer, but that doesn't make any difference in the PDF export problem.
The designer created another 16-pg document similar to the one with the problem in it, using a very similar graphic element. (These docs are two versions of a sales kit -- one with prices, one without.) For some reason, this document does NOT overprint when exported to PDF. So far, I haven't been able to figure out what settings are different in this document.
I don't know if the layered image was created in Illustrator, which the designer used to create some of his graphics. I do have access to Illustrator and also am attempting to learn this program so possibly could make some fixes if need be. I have Photoshop but not Acrobat.
Thanks for any help!
Lorna

I don't fully understand your problem but I'd like to help.
By Shift-Command-Click, I think you are referring to selecting underlying objects. I'm on a mac, for me it's command control click. At any rate it's not related to locked objects, it's a method of selecting an object when other objects are stacked on top.
Possibly your text is on a locked layer. Window: Layers - check to see if any of your layers have a padlock icon.
Also it could be on a master page. View: Show Frame Edges. Master page elements will have dotted outlines, they can be edited on the master page.
Regarding images - there are two possible selections to make. One is the container, the other is the content. To select one or the other, Object: Select: Container or Content. There are also little icons in the control bar that allow you to do this.
With containers, you can select the bounding box, or you can manipulate the anchors. If you select the object with the Selection Tool (dark arrow) you get the bounding box. If you then switch to the Direct Selection tool (hollow point) you can change the anchor points. To be clear - if you select the box with the direct selection tool to start with, you will select the contents (if there are any), not the container.
With InDesign, a container object is one of 4 things - a text box, a graphic box, an unassigned box, or a mask for other containers. Sometimes it is hard to tell what you have. Learn to distinguish text boxes from other types by looking for the small white boxes in upper left and lower right when you select them.

Export InDesign file to pdf problem

I layout a weekly publication which contains photos. The positions are set, so each week I just drop a new photo into the set positions. Hundreds of these work every week, but once in awhile I get one that replaces the old photo in InDesign, but when I export it out to a pdf, it reverts to the previous photo, which obviously causes a little issue.
Any ideas on why this happens and what to do differently? Thanks,

I use Acrobat Professional for this along with InDesign. I believe it's the only way to do this.Export your document as a PDF. In the export dialog box check, "Create Acrobat Layers" under options. You need to set the compatibility of your PDF as "Acrobat 6 (PDF 1.5)" or higher in the upper right-hand corner. Open the PDF in Acrobat. On the left you'll want to click on the layers icon. Opening up the layers you'll see the names of the layers exported from your InDesign file. Right clicking or control clicking on a Mac will open up the properties dialog box. The layer properties dialog box will allow you to set a number of states for the layers in PDF. You can even designate a layer to never show but always print. And, set the layer that shows to never print. Once you you set the properties for each layer save the document and you're done
Source Internet Marketing Experts

Unable to export book layout to PDF or BLURB! Using Lightroom 4.4's book module on Mac OS X 10.6.8.

After investing a bunch of time laying out a photo book, I would like to generate a PDF in order to proof it before sending the book to BLURB for printing. After numerous attempts, I am unable to generate a PDF of the book or, by clicking the 'Send Book to BLURB' button, access the sign in window for uploading to BLURB. Although, if I create a new book (without images or text) I am able to access the window for saving it (the blank book) as a PDF to my hard drive and I am also able to access the sign in window for uploading to BLURB. I could sure use some help. Please let me know what I might be doing wrong! Thank you very much.

You're running PowerPC code under Rosetta emulation on an Intel based system -- and Rosetta has become increasingly unstable (and Apple got rid of it in 10.7, so they won't be fixing any of the bugs)
Your best solution is to upgrade to an Intel native version of Photoshop.

Unable to export tdr files to pdf.

Similar Messages

Maybe you are looking for