Unable to export to pdf from crviewer

Hi
I have a code scripted in visual basic 2008 (sP1) where a report gets loaded and displayed in the the crystal viewer. My report display's  in the cRViewer, however when i try to export the report to  a pdf i got the following error message:
Method 'ISCREditableRTFExportFormatOptions_reserved5' on type 'CrystalDecisions.ReportAppServer.ReportDefModel.EditableRTFExportFormatOptionsClass' from assembly 'CrystalDecisions.ReportAppServer.ReportDefModel, Version=11.0.3300.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' is overriding a method that has been overridden. I have tried to export from the 'export button' as well as programmatically using the 'ExportToDisk' option. with no luck
Has anyone else come across this error or any workarrounds?

Looks like you are using .NET 2008 with CR XI release 1 (11.0). CR XI release 1 is not supported with .NET 2008, only CR 10.5 (Crystal Reports Basic for Visual Studio 2008) and CR 2008 (12.x with SP 1) work and are supported in .NET 2008. Please see [this|https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsassemblyversionsandVisualStudio+.NET] wiki for more details.
Ludek

Similar Messages

  • Exporting to PDF from PageMaker 7.0 in Classic

    Since upgrading to 10.4 I have been unable to export to PDF from PageMaker 7.0.1. Adobe tech support says there is a problem with the Adobe Postscript driver. I have downloaded and installed a new Adobe PS driver but still get a message that says Adobe PS cannot be used because of an internal error. There is a code (-30581). Anybody having this problem?

    Did Adobe say your copy might be corrupt, or there was a general incompatibility between AdobePS and your Classic version, or what please?
    I don't happen to know a specific solutioni, but you might try this workaround, even though it sounds rather klunky until you're used to it:
    Use Apple's own Desktop Printer Utility to built a virtual Desktop Printer using Translator Postscript, which will automatically be set as the default Classic printer, even though it doesn't actually appear on the Desktop, and should be accessible through either AdobePS or Apple's own LaserWriter driver.
    Tell that to print to File, which should produce a .ps file that will double-click open in Preview, which can convert to PDF.

  • Export to PDF from Infoview does not show correct data - CRS 2008

    I have a problem where users attempt to export a report from the Infoview interface to a PDF.  The report shows correctly in Infoview while in Crystal Reports format, but when the use exports the data, the data changes and shows different values.  To troubleshoot, I have tried this on different clients - without a change in the result.  I have also pulled the latest instance of the report from this history on the Central Management Console.  Interestingly enough, the same thing happens when I export to a PDF from there as well.  Any insight or help would be greatly appreciated.  Thanks!

    Hello,
    I can't tell you offhand on what the issue is here, as various factors come into play.
    Here are a few troubleshooting steps you can try:
    - Try opening the report in Crystal Report designer and export to pdf from there. Does this work?
    - Instead of viewing the report and export; schedule a report to PDF and check the results.
    - there is currently a know issue in regards of certain formulas and using font type "arial Unicode MS" that gives incorrect export to pdf. Maybe alter the font used.. or see if you take out any questionable formulas and try again to export.
    Regards,
    Duncan

  • I am unable to print a pdf from a website through Adobe Reader on my mac. It keeps telling me that no pages have been selected

    I am unable to print a pdf from a website through Adobe Reader on my mac. It keeps telling me that no pages have been selected - I have uploaded the latest version of Adobe with no luck and have never had this issue before !

    Hi bengaunt ,
    Thank you for posting on the Adobe forums, you can try printing as an image.
    Open the file>Print>advanced>check the box "print as an image" OK
    Thanks,
    Vikrantt Singh

  • Unable to print to pdf from any of my applications

    Hello,
    I am running Acrobat 8.0 on windows 7. Toshiba Qosmio 64 bit. I am unable to print to pdf from any of my applications. Office, Mozilla, Lotus 1-2-3 and others. When I choose the print option. And from the drop down menu choose Adobe PDF as the printer. And when I click to continue I get the little metered bar showing it's working, but then I get an error in the printer que. I don't even get an option what to save it as or where to save it to. It just goes straight to the metered bar showing its working. And it does this for all my programs where I can print to pdf. Can anyone help me? Also, this is a student version. Could the student version be unable to do this?
    Thank you,
    JimmyJoney

    Although Acrobat 8 is not supported on Win 7, you can try a few things. First, apply all updates to Acrobat 8. If this doesn't help, check to make sure that the PDF port was created. If not, you can try:
    Open Control Panel, select Printers
    * Click Add a Printer
    * Click Add a local printer
    * Select Use an existing port (should be preselected), change the port to "Desktop \*.pdf (Adobe PDF Port), click Next
    * On the next page, click Have Disk...
    * Click Browse and browse to C:\Program Files\Adobe\Acrobat 8.0\Acrobat\Xtras\AdobePDF (or wherever you have Acrobat installed), click OK.
    * It should now show a series of "Adobe PDF Converter" entries. Select the first one and click Next
    * Change the printer name if desired, uncheck the box to use it as a default printer, click Next
    * Do not print a test page, click Finish
    * Find your new printer in Printers. Right click on it and select Properties, Advanced
    * Click "Print directly to the printer", click OK
    These last steps are detailed in the following discussion.

  • Having trouble exporting to pdf from InDesign CS6

    When I attempt to export to pdf from InDesign CS6, the application crashes. Apparently there is some phantom plug-in issue.
    I need to get this resolved asap.
    Thank you,
    Marissa

    Have a look at this generic document to help you troubleshoot: http://helpx.adobe.com/indesign/kb/troubleshoot-printing-pdf-export-indesign.html
    Could you also provide details about what you've tried, and what errors you encountered? Is this problem limited to a particular document, or all documents?

  • Export to PDF from Autocad: Acrobat always opens PDF with 'layers panel and page' shown.

    Hello,
    Whenever I export to PDF from Autocad, Adobe Acrobat opens the PDF with the 'Layers Panel and Page' shown.
    Each time I have to manually go to 'Properties' and select 'Page only', close 'Properties' and close the PDF and select to save the changes, in order to show the just the page.
    Is there a way to make PDFs always export to 'Page only' automatically as default?
    Thanks!
    Ione

    Thakns Peter, I had seen this thread, but it doesn't really address my issue. I've exported individual chapters from the book file, all with success, so I know there isn't a file corruption issue.  The problem seems to do more with memory allocation/usage. 
    I have tried: quitting and then immediately exporting the file, and even rebooting and then relanuching and exporting.  Both of these allow me to get a few pages farther along, but still not through the entire book.
    I remember back in the day there used to be a setting for how much RAM/dis c space was allocated to a certain applicatino (I knowm it was a long time ago).  I didn't know if there might be something like this hidden somewhere

  • Buttons not exporting to PDF from CS5

    Howdy, all. I've a problem exporting documents containing buttons to PDF. Specifically, CS5 doesn't export interactive buttons placed in my InDesign document to interactive buttons in a PDF file; they show up, instead, as simple, non-interactive graphics. (No pointing fingers, no actions.)
    This is true for all documents I have created in or imported into CS5.
    As a test, I went back to CS4 and created a document with a single button chosen from the "Sample Buttons," to which I attached the "Next Page" action. Exporting to PDF from CS4 works fine; I get a functioning Next Page button in the resulting PDF file. Opening the same InDesign document in CS5 and exporting with the same settings to PDF yields a non-functioning button graphic appearing on the PDF page.
    Opening the PDF file in BBEdit, I see that there is no "Fields" entry in the PDF file's Catalog dictionary, so it seems as though the button is, indeed, being exported into the PDF file as a simple graphic.
    What obscure CS5 setting (presumably hiding in plain sight) am I missing?
    By the way, CS5 does export the buttons correctly to swf.
    Thanks much.
    - John

    In CS5 you have to change the export type to an 'Adobe PDF (Interactive)' to get the buttons to work.
    Bit of a pain because you can't save presets like you can with the standard PDF export, but you can specify some of the PDFs view settings at the same time.  In my view they should have just added all that functionality to the standard PDF export, but perhaps that wasn't possible.  However it was a dud decision to remove working button export from the other PDF export.

  • Unable to print to pdf from a pdf

    We're having a issue where we're unable to print to pdf from a pdf with acrobat 9 std, so far a 64bit machine. We get the following errors
    "the document could not be printed"
    "there were no pages selected to print"
    We see the issue with all pdfs. Acrobat 7 std works fine, as does printing to pdf from other applications with 9 std. So far it only effects acrobat 9 std. We've repaired the installation and updated to the latest. We do have however only see this with one machine, but we haven't looked past this one machine yet...Any ideas?
    thanks all,
    cg

    XP pro 64bit. Just updated to 9.3.3, still have the error being thrown.
    The user fills in a form from our intranet and then prints it with the adobe printer creating the illusion that its write protected. I'm not one to stop them, given the forms are low value and all. Possibly if the process is uncomplicated (that's key here) then saving the document to the desktop and making the change and write protecting it there before transmittal might be an alternative, as long as it doesn't rely on passwords and keys...
    Sorry I'm an adobe noob.
    thanks,
    cg

  • Export the pdf from indesign some error Pop Up window (Failed to Export the PDF file). How slove the

    Export the pdf from indesign some error Pop Up window (Failed to Export the PDF file). How slove the problem
    Please some one help on this

    You need to try exporting the first half of the book.
    If that exports ok then export the other half of the book.
    Whatever half it fails on - keep dividing the book in half to find the culprit page or pages.
    For example if your book is 128 pages long:
    1. Export pages 1 - 63
    2. If these Fail to Export then
    3. try exporting1-32
    4. If these Fail to Export
    5. then try exporting1-16
    If it doesn't fail (step 2)
    Then export pages 64-128
    and 64-90 etc.
    until you find the pages causing the issues.

  • Color changes when exporting to PDF from Apple Pages or Word

    When I export to PDF from Apple Pages or Microsoft Word, there is a noticable color shift.
    The RGB color values that are 23, 76, 140 in Pages for a medium shade of blue like this but appear as 50, 61, 134 with a decidedly purple cast like this in the PDF.  
    Has anybody else run into this problem?  Any tips for troubleshooting?

    Thanks for the reply.  It was created using Apple Pages. I tried exporting to PDF in two different ways, both with the same result.
    1. Within Apple Pages, one can click File > Export > PDF
    2. The other option is to click Print > PDF > Save as PDF
    I also tried this second method with Microsoft Word, and again the color was altered.  Any suggestions that you can provide to resolve this issue will be very helpful.

  • Exporting a pdf from InDesign-need to access Overprint

    I am exporting an InDesign CS5.5 Document with mixed ink and Illustrator eps with pantone overprints.
    When I export it into PDF the native mixed ink in InDesign represent accurately.
    However the Illustrator eps preview as solid gray @ 70%. This is the overprint layer onto of Pantone 293.
    When I turn on Print preview in pdf it is accurate.
    My question is:
    In the export to pdf palette under the output header, there is a check box 'simulate overprint'.
    I've tried several different variations, but cannot get that check box to turn on.
    Unlease I make an X-1a file the overprint for the Illustrator eps does not preview without turning on the output preview palette in Acrobat.
    And lets face it, to the client, that is rocket science.
    How can I access the 'Simulate Overrpint' option when I am exporting the document.
    Thanks,
    J-

    Or, better than that, export the PDF from InDesign as PDF/X-4!
    By default, Acrobat and Reader use overprint preview when displaying PDF/X-4 files. Plus you have the benefit of full color management and not having transparency ruined by premature flattening.
    One other note. Other than for the fairly common practice of overprinting black text over colors to avoid halo effects due to registration, one should be exceptionally careful in using overprint. Trapping, the other good, justifiable use for overprint is really best performed by the RIP. Most modern RIPs provide for automatic trapping. Overprint should absolutely not be used as a “poor man's transparency,” especially in conjuction with spot colors. With the advent of real transparency in the Adobe imaging model and hence in Illustrator, InDesign, and PDF, there is no good reason to use overprint hacks anymore to simulate transparency.
              - Dov

  • Exporting a PDF from keynote without losing hyperlinks

    exporting a PDF from keynote without losing hyperlinks
    anyone have any ideas why it doesn't export the hyperlinks to the PDF?
    i only have PDF reader on my machine, not the full PDF creator

    Or, better than that, export the PDF from InDesign as PDF/X-4!
    By default, Acrobat and Reader use overprint preview when displaying PDF/X-4 files. Plus you have the benefit of full color management and not having transparency ruined by premature flattening.
    One other note. Other than for the fairly common practice of overprinting black text over colors to avoid halo effects due to registration, one should be exceptionally careful in using overprint. Trapping, the other good, justifiable use for overprint is really best performed by the RIP. Most modern RIPs provide for automatic trapping. Overprint should absolutely not be used as a “poor man's transparency,” especially in conjuction with spot colors. With the advent of real transparency in the Adobe imaging model and hence in Illustrator, InDesign, and PDF, there is no good reason to use overprint hacks anymore to simulate transparency.
              - Dov

  • Anyone know how to export a PDF from InDesign so it is "click to go to next page" instead of "scroll to go to next page"?

    Anyone know how to export a PDF from InDesign so it is "click to go to next page" instead of "scroll to go to next page"?

    I don't use the latest InDesign, but in the past ID's options for exporting to PDF did not allow setting how a PDF should be viewed once exported.  However, these settings can be adjusted in Acrobat through Preferences: check out Page Layout and Zoom under Page Display.
    David

  • Error in character spacing when exporting to pdf from word 07

    I am having trouble with exporting to pdf from MS Word 07.  The character spacing throughout the document is wacky.  This also happens when exporting to pdf from a GIS program.
    Any help?

    I use the term export because that is how it is done in the GIS software that I use - ArcMap 10.
    In MS Word I access Adobe Acrobat Pro 9 through the print menu. I am using Windows 7.
    I do not always have this trouble, but it started yesterday on a 30 page word doc and then after that, it started on an ArcMap doc.
    As for embedding fonts, when I check the Word doc as you suggested, i see many different fonts listed.  Some are embedded, some embedded subset, some are not embedded at all.  I use styles to manage font types and heading levels.  There is nothing fancy about it - all Times New Roman.

Maybe you are looking for