Unable to Export to Text when using Enterpirse

Post Author: dmface15
CA Forum: Exporting
I created a report in Developer and have the ability to export the report to a text file. However, when i saved to report to Crystal Server and run it I do not have the option to export to text. What is the difference and why the limitation?

Usually your cd-burning-software should be able to show you if it supports CDText or not (for example Nero has it's own info-tool that informs you about all features of your drive).
But if your drive is only one year old it really should support CDText.
Windows XP iPod mini 2nd gen.

Similar Messages

How do I create columns in my text when using pages?

How do I create columns in my text when using pages?

Presuming you are using Pages 5.2.2:
select the text > choose the number of columns in the Format > Layout sidebar
Peter

Charge for texts when using iMessage

Why am I charged for texts that include photos or video when using iMessage to send or receive with other Apple products? Should the senders use an email address instead of my iPhone number? I have ATT with pay as you go texting. I'm only charged when there's a photo or video attached.

Hi Garypsu,
Thanks for using Apple Support Communities. This article has some steps you can try if iMessages aren't sending correctly:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
If you still can't send or receive iMessages
Ensure that iMessage is turned on in Settings > Messages.
To send and receive iMessages, your device must have a valid cellular or Wi-Fi data connection.
iPhone: Troubleshooting Cellular data
iOS: Troubleshooting Wi-Fi networks and connections
iMessage registration validates your Apple ID for use with iMessage. If you are unable to activate iMessage, follow this article.
If an iMessage cannot be sent, it will be resent using SMS or MMS, depending on the content. You can turn this behavior on or off in Settings > Messages > Send As SMS. Carrier messaging rates may apply.
Verify that the Apple ID or phone number is listed in Settings > Messages > Send & Receive.
Step 4 above describes how to turn off having failed iMessages send as texts to prevent this from happening.
Cheers,
- Ari

Problem exporting to excel when using embedded web templates through WAD

Using web templates designed with WAD, we are experiencing an issue when trying to export excel when using embedded web templates.
We have set up tabstrips within our templates that load other templates (embedded into the global template).
Upon right clicking on any query and choosing "Export to Excel", any query that is in one of the tabs using the embedded web template item does not show up. Any queries in natively in the global web template will export and show up fine.
Any thoughts on how to enable something like this, or workarounds to make this work? We decided to split up these templates for performance reasons and can't go back from that decision. Also let me know if you need a better explanation of what we're trying to do.
Thanks in advance!
Jonathan

Hi SDBI,
Is this in place of loading a new template per tab? We are using container layouts in all of our templates so we can link things into tabstrips as well, we have just split up some templates to be embedded into tabs for performance reasons and data locking.
Also when exporting, we are looking for all of the items displayed at that time to be exported, however only the items from the global template show up, not all of the displayed queries. For example, anything outside of the tabstrip will export perfectly, but since the query embedded into the template the tabstrip is loading is not part of the native web template, it does not show up.
Seems like a tool limitation to me when embedding templates?
Thanks,
Jon

How do I do Export to Text? Using JSP

Hi All,
I need your help for doing Export to Text functionality.
If I hit on "Export to Text" link, the file dialog will be open and I save the data.
Is this possible through response?
like response.setHeader("Content-type","application/text");
If not possible through response then give me a another solution
Thanks
Amit

http://forum.java.sun.com/thread.jspa?threadID=5199777&messageID=9792760#9792760

Why are Image Export Sizes Doubled when using Save vs. SaveForWeb&Devices?

Hi Folks
Maybe I'm missing something here ...
I have 2 versions of an action I use to batch process images. One uses the Save As dialogue and the other uses SaveForWeb&Devices. However, the image sizes created using the latter are about 50% smaller than those created with the former. The two actions differ only in the Save step - I duplicated the original and swapped the save step in the action.
Is SaveForWeb&Devices usign a more efficient optimisation algorithm or am I missing something?
The reason for using the Save As dialog is that Batch Processing is able to override the save location, whereas I had trouble overriding save location in a batch process which used an Action that Saved using SaveForWeb&Devices.
Cheers
Richard
P.S. I also find this size doubling takes place when using the Image Processing script supplied with PS. I'm on PS5 on OSX10.6.8.

SfW throws out redundant custom data, when the normal JPEG save does not. Using the normal save e.g. also retains clipping paths (10 years ago people used that al lthe time for print stuff) and of course also more info on color management, user metadata and what have you. Therfe may bne more specific optimizations in SfW, but that's something Mr. Cox can probably answer better...
Mylenium

How to smooth text when using 720p HDTV as monitor?

I know I'm not using the best choice for a Monitor, but want to tweak it the best I can.
Sony Bravia BX 320, 720P TV as my monitor
New Mac Mini bought yesterday
1080P Display Setting in Mini's display profiles
720P ibid
Connected via HDMI
Have tried tweaking around with different Mac Display profiles and color calibrations. Above look the best as far as resolution and picture when sitting far away from screen.
Closer I get to screen, the more pixelated and crappy the text looks, which is really bad
What are the tweakablle settings, both in the monitor and computer I would want to play with to smooth the text out as best as is possible given my monitor choice?
What would be a better "TV" choice to use as a monitor for my Mini? I only run a Roku and OTA HDTV into the TV tuner.
Is there a choice that looks good in both TV and Mini monitoring applications?
Thanks so much.

I have never used any of this, I have never needed to use it. I just know that the information is around and has been useful to others.
I also saved this tutoial that I found once. Perhaps it can help you;
SwitchResX Tutorial
0. All of this is easier to do if you have a portable Mac, since you can configure the external display while viewing everything on the built-in display. You can do it with only the external display (your big TV, that is), but it's tedious.
1. Get the proper cable to connect your Mac to the display (VGI, DVI, or DVI->HDMI, depending on your display's inputs; if you're using a portable Mac with only mini-DVI you'll need the adapter *and* a cable).
2. Connect the display and turn on the Mac. Launch the SwitchResX Control application (if all you're doing is setting up a custom configuration, you don't need the preference pane and thus don't need APE either).
3. In the SwitchResX Control application, select the display you want to configure in the "Settings of:" menu (if it isn't selected already) and click the "Display" tab. Then click the "Export DDC" button and select a location to save the file.
4. Using the text editor of your choice (TextEdit works, or you may have a preference for something else) open that file you just exported. You should see at least one Monitor Description Block (mine has two, labeled Descriptor #0 and Descriptor #1). This should give you a starting point. Mine looks like this:
Code:
    Descriptor #0 is Timing definition:
    Mode = 1920 x 540 @ 60Hz
        H. Active...............1920 pixels
        H. Blanking.............280 pixels
        V. Active...............540 lines
        V. Blanking.............22 lines
        HSync Offset............88 pixels
        HSync Pulse Width.......44 pixels
        VSync Offset............2 lines
        VSync Pulse Width.......5 lines
        Pixel Clock.............74.25MHz
        Horizontal freq.........33.75kHz
        Vertical freq...........60.05Hz
        H Image Size............16mm
        V Image Size............9mm
        H Border................0 pixels
        V Border................0 lines
            Interlaced
            Sync: Digital separate with
                * Positive vertical polarity
                * Positive horizontal polarity
Note that the Mode is described as 1920 x 540 @ 60Hz, interlaced. It's actually 1920 x 1080, interlaced. I'm not sure why the vertical resolution is half what it should be there, but that's an important detail to note. If yours looks like it's half what it should be, you'll have to double it below. Use your common sense here.
The next step depends on what problem you need to solve. If you have a picture and you just need to adjust its position and/or size, you have the easier task and these instructions can help you. If you don't have a picture at all, the values provided by your display are invalid, and you'll have to do some research to find valid values (I can't help you find them). Search and/or ask on this forum, and also try Google.
5. Click on the "Custom" tab in the SwitchResX Control app. Click the "+" button to create a new resolution. Select "Custom" in the menu at the top (as opposed to "Scaled"). Start by entering the values in the Monitor Description Block you exported and opened in a text editor. The thing to realize as you get started is that all the numbers interact with each other, and as you change one value the application will recalculate the others if they're affected by the change. At a given resolution, the number of horizontal pixels and the number of vertical lines in each box always have to add to the same totals, and you can get those values by adding the "Active" and "Blanking" values in the Monitor Timing Block. To stick with my display, the horizontal pixel values must add up to 2200 (1920 (H. Active) + 280 (H. Blanking)), and the vertical line values must add up to 1124 (2 * (540 (V. Active) + 22 (V. Blanking))). The horizontal and vertical scan rates are calculated using those total values and the pixel clock value.
This is a very important concept to understand. With a constant pixel clock value and constant totals of Active + Blanking in both axes, the scan rates should also remain constant. If you have changed your active, porch, or sync width values and the scan rates don't add up, you won't get any picture. To use my display as an example again:
Code:
Pixel Clock 74.25 Mhz, Interlaced
            Horizontal      Vertical
Active:     1920 pixels     1080 lines
Frt. porch: 88 pixels       4 lines
Sync width: 44 pixels       10 lines
Back porch: 148 pixels      30 lines
Scan rate: 33.75 kHz       60.05 Hz
Note that 1920 + 88 + 44 + 148 = 2200, and 1080 + 4 + 10 + 30 = 1124.
6a. Adjust the values to fit your display (heh). This is the trial-and-error portion of the task, and is also slightly counterintuitive. You can get an idea of the adjustments you need to make if you use DisplayConfigX to display an "Image Size Test" (in the "Test Screen" tab). It'd make life easier if that were built into SwitchResX, but anyway:
If you need to shrink the visible area, decrease the Active value and increase the front or back porch values by the same amount. If you need to increase it, do the opposite. It helps to work incrementally (say, by multiples of 8) and save and test your work as you go along. Note that you may not actually need to restart the computer: I found that I could just unplug the HDMI cable from the back of my display and plug it back in, and the new settings would take effect. Remember to click "OK" (and not "Cancel") in the Timing Parameters window, then "Apply" in the main window, before you do this, or before you reboot. Otherwise your changes will be lost.
The porch values are counterintuitive. The horizontal "front porch" is the right edge of the screen (not the left as you might expect); the vertical "front porch" is the bottom edge of the screen. To move the image to the right, decrease the horizontal front porch and increase the horizontal back porch; to move it to the left increase the front porch and decrease the back porch. To move the image up, increase the vertical front porch and decrease the back porch, to move it down, decrease the front porch and increase the back porch. Again, it helps to save and restart or disconnect/reconnect the display to test these adjustments. The "Quick change" buttons in the bottom right-hand corner of the Timing Parameters window will adjust the porches for you, but note that in older versions the buttons were reversed (down means up and left means right, if you catch my drift). That's been fixed in version 3.7.6, apparently.
Also, remember as you adjust porch values that you shouldn't ever need to change the sync width.
6b. You know how I said you might not need to restart the computer? That's not actually 100% true for some displays. When I boot my computer with the display connected, the image is shifted to one side. If I subsequently change resolutions in software or disconnect and reconnect the display, the image will shift back. I got around this problem by first coming up with a configuration that was properly aligned after such a switch. After I had that I rebooted and estimated how far the image was shifted to one side. I then adjusted the porch values, saved, rebooted, and tested again. I now have two configurations, one for "fresh boot" that's adjusted for that sideways shift, and one I can use if I've changed the resolution for some reason. After all that, my default settings are now:
Code:
Pixel Clock 74.25 Mhz, Interlaced
            Horizontal      Vertical
Active:     1834 pixels     1024 lines
Frt. porch: 120 pixels      40 lines
Sync width: 44 pixels       10 lines
Back porch: 202 pixels      50 lines
Scan rate: 33.75 kHz       60.05 Hz
Again, 1834 + 120 + 44 + 202 = 2200, and 1024 + 40 + 10 + 50 = 1124. The Pixel Clock and both scan rates are the same as I found in the DDC.
Note also that if you have the same sideways shift problem, your two resolutions can't be identical (the system won't know which one to select). I made mine different by two pixels of horizontal resolution, which turns out to be rounded off in practice anyway (so one's 1832 x 1024, and the other's 1834 x 1024, with porch values adjusted accordingly, but they both look the same).
At this point you should be able to align your desktop to your display by iterating through these steps, applying your changes, and either disconnecting and reconnecting the display or rebooting.
7. If ever you go horribly wrong and go from having a misaligned picture to having no picture at all, you'll have to delete the override installed by SwitchResX. Boot the computer into Safe Mode, launch the SwitchResX Control app again, and click the "Factory settings" button, then the "Apply" button, and reboot.
And as a preemptive strike: no, I probably don't own your display and don't know the numbers for it offhand, and my consulting rate is $45/hr (really!).
Copyright Fedward. All rights reserved, all wrongs reversed.

Numbers get exported as Text when selecting Download to Excel / Download to

I have a dashboard report in which the numbers appear in the French format as follows:
37 167 534,4
In English format, it would represent
37,167534.4
When i export my report, the number is displayed in Excel as text, and not as a number. This is because of the space in between37 and 167 in the French format.
What changes do i make to ensure that the number is exported as a number, and not as text?
I'm using Office 2003 SP3. Need a solution ASAP.

Hi,
You can try adding the below statement in the Custom CSS section of the column properties:
mso-number-format:"\@"
fyi..:
refer my o/p screen short:
http://imageshare.web.id/images/a18zptth75j1q6on18qm.jpg
the above one works for excel download with % symbol
refer:
Re: Answers report-download as Excel loose trailing zeroes
Thanks
Deva

How can I change the color of the highlighted text when using the FIND function in Terminal?

When searching for text in the Terminal's buffer, the matched text is highlighted using a color which seems to be computed from the background's color. I'm using a black backgroud and the finder's highlighter is grey. How can I change this? I'd like to specify the foreground and background colors of the matching text. I couldn't find an appropriate setting in the terminal's settings, nor in the default settings using the command "defaults".

In my .bashrc file, I have enabled a couple of grep environment variables.
GREP_OPTIONS='--color=always'
GREP_COLOR='00;38;5;226'
The latter is a vivid yellow.
From the shell, I can search my history:

Attachments converted to plain-text when using redirect rule

When I redirect emails using a Mail rule, any attachments (as well as the entire message) are converted to plain text with extra control character, rendering the attachment unviewable. This does not happen when I manually redirect an email. Any help you can provide would be welcome.

When I redirect emails using a Mail rule, any attachments (as well as the entire message) are converted to plain text with extra control character, rendering the attachment unviewable. This does not happen when I manually redirect an email. Any help you can provide would be welcome.

Blurry Text When Using Video out With FX 5900U

I just got a MSI Geforce FX5900Ultra VTD256, and i was trying to play games on my TV. I used the S-Video to video (the yellow Cable) adapter and when im in the desktop, all the text is real blurry, i cant even read it. I tried lowering the resolution to see if that would make it easyer to read, but it didnt work. Can someone please help. Maybe the is somthing wronge with me TV???

Hi,
TV sets have lower resolution and bandwidth than PC monitors - the two are sort of related, but are not quite the same thing.
Resolution is often measured in "lines", meaning the number of individual vertical lines that could be displayed across the width of the TV and still be distinguishable as individual lines. A figure of 800 lines was considered pretty good, and could usually only be achieved in a TV studio, from a camera direct to a monitor. So 800 pixels is about as much as a TV (especially a smaller one) can reasonably display. (The vertical resolution depends on the TV standard, and is about 600 lines or pixels for PAL, and about 500 for NTSC)
The other factor is Bandwidth, which is measured in Megahertz (MHz). Basically, the finer the (horizontal) detail, the more bandwidth you need in the path between the source and the picture tube to display it faithfully. Broadcast TV is deliberately limited to about 5MHz, whereas a computer monitor will have several tens of MHz of bandwidth.
Also, the chrominance (colour) component of a composite or S-Video signal is limited to less than 2 MHz, so fine colour detail will be worse off (Black on white or vice-versa will give best results).
Anyway, the practical outcome of all this is that the highest resolution you can use for TV out is 800x600, and even then you need to use larger fonts (so the vertical lines are thicker, and there are a reasonable number of horizontal lines in a character). The maximum number of characters per line should be less than 60-80.
There are some scan-converters available which use fancy techniques to render a reasonable image at higher resolutions, but they are fairly expensive.
S-Video should give better results than composite, but you will still be up against bandwidth and resolution limits
Cheers

Missing Text when using CONVERT to PDF

I am using Acrobat Pro 9 in Wnidows 7 and Microsoft Publisher 2003.
When I use the CONVERT command to create a PDF - it is missing all of the text on the master page.
If I create the PDF with the PRINT command - everything is OK.
PS: The same Publisher File on another computer using Acrobat Pro 8 works fine - CONVERT or PRINT and no missing text
I prefer to use convert because sometimes the PRINT command drops some of the hyperlinks.
[edited by forum host - email removed]

Hi,
Could you mail be the file with which you are seeing the issue. I will investigate at my end to see what the issue is. You can mail me at [email protected]
Thanks,
Love Bisht

Drop shadow is not exported in pdf when used in a symbol

When I apply the effect "drop shadow" on an object and export to pdf it works fine. When I then convert the object into a symbol and export to pdf, the effect is gone.
Suggestiones other than "don't use symbols" ???

No, I can't reproduce the Preview issue.
Maybe it is caused by other options in your file.
Anyway: Preview is in no way suitable to pre check files for printing.

Unable to export Hive managed table using Oraloader

Hi,
I am using MySQL as Hive metastore and trying to export a Hive managed table using Oraloader.
I get the following excpetion in Jobtracker:
2012-09-12 12:23:56,337 INFO org.apache.hadoop.mapred.JobTracker: Job job_201209121205_0007 added successfully for user 'oracle' to queue 'default'
2012-09-12 12:23:56,338 INFO org.apache.hadoop.mapred.AuditLogger: USER=oracle IP=192.168.1.5 OPERATION=SUBMIT_JOB TARGET=job_201209121205_0007 RESULT=SUCCESS
2012-09-12 12:23:56,353 INFO org.apache.hadoop.mapred.JobTracker: Initializing job_201209121205_0007
2012-09-12 12:23:56,353 INFO org.apache.hadoop.mapred.JobInProgress: Initializing job_201209121205_0007
2012-09-12 12:23:56,594 INFO org.apache.hadoop.mapred.JobInProgress: jobToken generated and stored with users keys in /opt/ladap/common/hadoop-0.20.2-cdh3u1/hadoop-datastore/mapred/system/job_201209121205_0007/jobToken
2012-09-12 12:23:56,606 INFO org.apache.hadoop.mapred.JobInProgress: Input size for job job_201209121205_0007 = 5812. Number of splits = 2
2012-09-12 12:23:56,606 INFO org.apache.hadoop.mapred.JobInProgress: tip:task_201209121205_0007_m_000000 has split on node:/default-rack/hadoop-namenode
2012-09-12 12:23:56,606 INFO org.apache.hadoop.mapred.JobInProgress: tip:task_201209121205_0007_m_000001 has split on node:/default-rack/hadoop-namenode
2012-09-12 12:23:56,607 INFO org.apache.hadoop.mapred.JobInProgress: job_201209121205_0007 LOCALITY_WAIT_FACTOR=1.0
2012-09-12 12:23:56,607 ERROR org.apache.hadoop.mapred.JobTracker: Job initialization failed:
java.lang.NegativeArraySizeException
at org.apache.hadoop.mapred.JobInProgress.initTasks(JobInProgress.java:748)
at org.apache.hadoop.mapred.JobTracker.initJob(JobTracker.java:4016)
at org.apache.hadoop.mapred.EagerTaskInitializationListener$InitJob.run(EagerTaskInitializationListener.java:79)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603)
at java.lang.Thread.run(Thread.java:679)
2012-09-12 12:23:56,607 INFO org.apache.hadoop.mapred.JobTracker: Failing job job_201209121205_0007
2012-09-12 12:23:56,607 INFO org.apache.hadoop.mapred.JobInProgress$JobSummary: jobId=job_201209121205_0007,submitTime=1347467036196,launchTime=1347467036607,,finishTime=1347467036607,numMaps=2,numSlotsPerMap=1,numReduces=0,numSlotsPerReduce=1,user=oracle,queue=default,status=FAILED,mapSlotSeconds=0,reduceSlotsSeconds=0,clusterMapCapacity=10,clusterReduceCapacity=2
2012-09-12 12:23:56,639 INFO org.apache.hadoop.mapred.JobHistory: Moving file:/opt/ladap/common/hadoop/logs/history/hadoop-namenode_1347465941865_job_201209121205_0007_oracle_OraLoader to file:/opt/ladap/common/hadoop/logs/history/done
2012-09-12 12:23:56,648 INFO org.apache.hadoop.mapred.JobHistory: Moving file:/opt/ladap/common/hadoop/logs/history/hadoop-namenode_1347465941865_job_201209121205_0007_conf.xml to file:/opt/ladap/common/hadoop/logs/history/done
My oraloader console log is below:
[oracle@rakesh hadoop]$ bin/hadoop jar oraloader.jar oracle.hadoop.loader.OraLoader -conf olh-conf/TestAS/scott/testmanagedtable/conf.xml -fs hdfs://hadoop-namenode:9000/ -jt hadoop-namenode:9001
Oracle Loader for Hadoop Release 1.1.0.0.1 - Production
Copyright (c) 2011, Oracle and/or its affiliates. All rights reserved.
12/09/12 12:23:42 INFO loader.OraLoader: Oracle Loader for Hadoop Release 1.1.0.0.1 - Production
Copyright (c) 2011, Oracle and/or its affiliates. All rights reserved.
12/09/12 12:23:47 INFO loader.OraLoader: Sampling disabled, table: LDP_TESTMANAGEDTABLE is not partitioned
12/09/12 12:23:47 INFO loader.OraLoader: oracle.hadoop.loader.loadByPartition is disabled, LDP_TESTMANAGEDTABLE is not partitioned
12/09/12 12:23:47 INFO output.DBOutputFormat: Setting reduce tasks speculative execution to false for : oracle.hadoop.loader.lib.output.JDBCOutputFormat
12/09/12 12:23:47 INFO loader.OraLoader: Submitting OraLoader job OraLoader
12/09/12 12:23:50 INFO metastore.HiveMetaStore: 0: Opening raw store with implemenation class:org.apache.hadoop.hive.metastore.ObjectStore
12/09/12 12:23:50 INFO metastore.ObjectStore: ObjectStore, initialize called
12/09/12 12:23:51 ERROR DataNucleus.Plugin: Bundle "org.eclipse.jdt.core" requires "org.eclipse.core.resources" but it cannot be resolved.
12/09/12 12:23:51 ERROR DataNucleus.Plugin: Bundle "org.eclipse.jdt.core" requires "org.eclipse.core.runtime" but it cannot be resolved.
12/09/12 12:23:51 ERROR DataNucleus.Plugin: Bundle "org.eclipse.jdt.core" requires "org.eclipse.text" but it cannot be resolved.
12/09/12 12:23:51 INFO DataNucleus.Persistence: Property datanucleus.cache.level2 unknown - will be ignored
12/09/12 12:23:51 INFO DataNucleus.Persistence: Property javax.jdo.option.NonTransactionalRead unknown - will be ignored
12/09/12 12:23:51 INFO DataNucleus.Persistence: ================= Persistence Configuration ===============
12/09/12 12:23:51 INFO DataNucleus.Persistence: DataNucleus Persistence Factory - Vendor: "DataNucleus" Version: "2.0.3"
12/09/12 12:23:51 INFO DataNucleus.Persistence: DataNucleus Persistence Factory initialised for datastore URL="jdbc:mysql://localhost:3306/hive?createDatabaseIfNotExist=true" driver="com.mysql.jdbc.Driver" userName="root"
12/09/12 12:23:51 INFO DataNucleus.Persistence: ===========================================================
12/09/12 12:23:52 INFO Datastore.Schema: Creating table `DELETEME1347467032448`
12/09/12 12:23:52 INFO Datastore.Schema: Schema Name could not be determined for this datastore
12/09/12 12:23:52 INFO Datastore.Schema: Dropping table `DELETEME1347467032448`
12/09/12 12:23:52 INFO Datastore.Schema: Initialising Catalog "hive", Schema "" using "None" auto-start option
12/09/12 12:23:52 INFO Datastore.Schema: Catalog "hive", Schema "" initialised - managing 0 classes
12/09/12 12:23:52 INFO metastore.ObjectStore: Setting MetaStore object pin classes with hive.metastore.cache.pinobjtypes="Table,StorageDescriptor,SerDeInfo,Partition,Database,Type,FieldSchema,Order"
12/09/12 12:23:52 INFO DataNucleus.MetaData: Registering listener for metadata initialisation
12/09/12 12:23:52 INFO metastore.ObjectStore: Initialized ObjectStore
12/09/12 12:23:53 WARN DataNucleus.MetaData: MetaData Parser encountered an error in file "jar:file:/opt/ladap/common/hadoop-0.20.2-cdh3u1/lib/hive-metastore-0.7.1-cdh3u1.jar!/package.jdo" at line 11, column 6 : cvc-elt.1: Cannot find the declaration of element 'jdo'. - Please check your specification of DTD and the validity of the MetaData XML that you have specified.
12/09/12 12:23:53 WARN DataNucleus.MetaData: MetaData Parser encountered an error in file "jar:file:/opt/ladap/common/hadoop-0.20.2-cdh3u1/lib/hive-metastore-0.7.1-cdh3u1.jar!/package.jdo" at line 312, column 13 : The content of element type "class" must match "(extension*,implements*,datastore-identity?,primary-key?,inheritance?,version?,join*,foreign-key*,index*,unique*,column*,field*,property*,query*,fetch-group*,extension*)". - Please check your specification of DTD and the validity of the MetaData XML that you have specified.
12/09/12 12:23:53 WARN DataNucleus.MetaData: MetaData Parser encountered an error in file "jar:file:/opt/ladap/common/hadoop-0.20.2-cdh3u1/lib/hive-metastore-0.7.1-cdh3u1.jar!/package.jdo" at line 359, column 13 : The content of element type "class" must match "(extension*,implements*,datastore-identity?,primary-key?,inheritance?,version?,join*,foreign-key*,index*,unique*,column*,field*,property*,query*,fetch-group*,extension*)". - Please check your specification of DTD and the validity of the MetaData XML that you have specified.
12/09/12 12:23:53 WARN DataNucleus.MetaData: MetaData Parser encountered an error in file "jar:file:/opt/ladap/common/hadoop-0.20.2-cdh3u1/lib/hive-metastore-0.7.1-cdh3u1.jar!/package.jdo" at line 381, column 13 : The content of element type "class" must match "(extension*,implements*,datastore-identity?,primary-key?,inheritance?,version?,join*,foreign-key*,index*,unique*,column*,field*,property*,query*,fetch-group*,extension*)". - Please check your specification of DTD and the validity of the MetaData XML that you have specified.
12/09/12 12:23:53 WARN DataNucleus.MetaData: MetaData Parser encountered an error in file "jar:file:/opt/ladap/common/hadoop-0.20.2-cdh3u1/lib/hive-metastore-0.7.1-cdh3u1.jar!/package.jdo" at line 416, column 13 : The content of element type "class" must match "(extension*,implements*,datastore-identity?,primary-key?,inheritance?,version?,join*,foreign-key*,index*,unique*,column*,field*,property*,query*,fetch-group*,extension*)". - Please check your specification of DTD and the validity of the MetaData XML that you have specified.
12/09/12 12:23:53 WARN DataNucleus.MetaData: MetaData Parser encountered an error in file "jar:file:/opt/ladap/common/hadoop-0.20.2-cdh3u1/lib/hive-metastore-0.7.1-cdh3u1.jar!/package.jdo" at line 453, column 13 : The content of element type "class" must match "(extension*,implements*,datastore-identity?,primary-key?,inheritance?,version?,join*,foreign-key*,index*,unique*,column*,field*,property*,query*,fetch-group*,extension*)". - Please check your specification of DTD and the validity of the MetaData XML that you have specified.
12/09/12 12:23:53 WARN DataNucleus.MetaData: MetaData Parser encountered an error in file "jar:file:/opt/ladap/common/hadoop-0.20.2-cdh3u1/lib/hive-metastore-0.7.1-cdh3u1.jar!/package.jdo" at line 494, column 13 : The content of element type "class" must match "(extension*,implements*,datastore-identity?,primary-key?,inheritance?,version?,join*,foreign-key*,index*,unique*,column*,field*,property*,query*,fetch-group*,extension*)". - Please check your specification of DTD and the validity of the MetaData XML that you have specified.
12/09/12 12:23:53 WARN DataNucleus.MetaData: MetaData Parser encountered an error in file "jar:file:/opt/ladap/common/hadoop-0.20.2-cdh3u1/lib/hive-metastore-0.7.1-cdh3u1.jar!/package.jdo" at line 535, column 13 : The content of element type "class" must match "(extension*,implements*,datastore-identity?,primary-key?,inheritance?,version?,join*,foreign-key*,index*,unique*,column*,field*,property*,query*,fetch-group*,extension*)". - Please check your specification of DTD and the validity of the MetaData XML that you have specified.
12/09/12 12:23:53 WARN DataNucleus.MetaData: MetaData Parser encountered an error in file "jar:file:/opt/ladap/common/hadoop-0.20.2-cdh3u1/lib/hive-metastore-0.7.1-cdh3u1.jar!/package.jdo" at line 576, column 13 : The content of element type "class" must match "(extension*,implements*,datastore-identity?,primary-key?,inheritance?,version?,join*,foreign-key*,index*,unique*,column*,field*,property*,query*,fetch-group*,extension*)". - Please check your specification of DTD and the validity of the MetaData XML that you have specified.
12/09/12 12:23:53 WARN DataNucleus.MetaData: MetaData Parser encountered an error in file "jar:file:/opt/ladap/common/hadoop-0.20.2-cdh3u1/lib/hive-metastore-0.7.1-cdh3u1.jar!/package.jdo" at line 621, column 13 : The content of element type "class" must match "(extension*,implements*,datastore-identity?,primary-key?,inheritance?,version?,join*,foreign-key*,index*,unique*,column*,field*,property*,query*,fetch-group*,extension*)". - Please check your specification of DTD and the validity of the MetaData XML that you have specified.
12/09/12 12:23:53 WARN DataNucleus.MetaData: MetaData Parser encountered an error in file "jar:file:/opt/ladap/common/hadoop-0.20.2-cdh3u1/lib/hive-metastore-0.7.1-cdh3u1.jar!/package.jdo" at line 666, column 13 : The content of element type "class" must match "(extension*,implements*,datastore-identity?,primary-key?,inheritance?,version?,join*,foreign-key*,index*,unique*,column*,field*,property*,query*,fetch-group*,extension*)". - Please check your specification of DTD and the validity of the MetaData XML that you have specified.
12/09/12 12:23:53 INFO DataNucleus.Persistence: Managing Persistence of Class : org.apache.hadoop.hive.metastore.model.MDatabase [Table : `DBS`, InheritanceStrategy : new-table]
12/09/12 12:23:53 INFO DataNucleus.Persistence: Managing Persistence of Field : org.apache.hadoop.hive.metastore.model.MDatabase.parameters [Table : `DATABASE_PARAMS`]
12/09/12 12:23:54 INFO Datastore.Schema: Validating 2 index(es) for table `DBS`
12/09/12 12:23:54 INFO Datastore.Schema: Validating 0 foreign key(s) for table `DBS`
12/09/12 12:23:54 INFO Datastore.Schema: Validating 2 unique key(s) for table `DBS`
12/09/12 12:23:54 INFO Datastore.Schema: Validating 2 index(es) for table `DATABASE_PARAMS`
12/09/12 12:23:54 INFO Datastore.Schema: Validating 1 foreign key(s) for table `DATABASE_PARAMS`
12/09/12 12:23:54 INFO Datastore.Schema: Validating 1 unique key(s) for table `DATABASE_PARAMS`
12/09/12 12:23:54 INFO DataNucleus.MetaData: Listener found initialisation for persistable class org.apache.hadoop.hive.metastore.model.MDatabase
12/09/12 12:23:54 INFO metastore.HiveMetaStore: 0: get_table : db=db_1 tbl=testmanagedtable
12/09/12 12:23:54 INFO HiveMetaStore.audit: ugi=oracle ip=unknown-ip-addr cmd=get_table : db=db_1 tbl=testmanagedtable
12/09/12 12:23:54 INFO DataNucleus.Datastore: The class "org.apache.hadoop.hive.metastore.model.MFieldSchema" is tagged as "embedded-only" so does not have its own datastore table.
12/09/12 12:23:54 INFO DataNucleus.Persistence: Managing Persistence of Class : org.apache.hadoop.hive.metastore.model.MSerDeInfo [Table : `SERDES`, InheritanceStrategy : new-table]
12/09/12 12:23:54 INFO DataNucleus.Datastore: The class "org.apache.hadoop.hive.metastore.model.MOrder" is tagged as "embedded-only" so does not have its own datastore table.
12/09/12 12:23:54 INFO DataNucleus.Persistence: Managing Persistence of Class : org.apache.hadoop.hive.metastore.model.MStorageDescriptor [Table : `SDS`, InheritanceStrategy : new-table]
12/09/12 12:23:54 INFO DataNucleus.Persistence: Managing Persistence of Class : org.apache.hadoop.hive.metastore.model.MTable [Table : `TBLS`, InheritanceStrategy : new-table]
12/09/12 12:23:54 INFO DataNucleus.Persistence: Managing Persistence of Field : org.apache.hadoop.hive.metastore.model.MSerDeInfo.parameters [Table : `SERDE_PARAMS`]
12/09/12 12:23:54 INFO DataNucleus.Persistence: Managing Persistence of Field : org.apache.hadoop.hive.metastore.model.MTable.parameters [Table : `TABLE_PARAMS`]
12/09/12 12:23:54 INFO DataNucleus.Persistence: Managing Persistence of Field : org.apache.hadoop.hive.metastore.model.MTable.partitionKeys [Table : `PARTITION_KEYS`]
12/09/12 12:23:54 INFO DataNucleus.Persistence: Managing Persistence of Field : org.apache.hadoop.hive.metastore.model.MStorageDescriptor.bucketCols [Table : `BUCKETING_COLS`]
12/09/12 12:23:54 INFO DataNucleus.Persistence: Managing Persistence of Field : org.apache.hadoop.hive.metastore.model.MStorageDescriptor.cols [Table : `COLUMNS`]
12/09/12 12:23:54 INFO DataNucleus.Persistence: Managing Persistence of Field : org.apache.hadoop.hive.metastore.model.MStorageDescriptor.parameters [Table : `SD_PARAMS`]
12/09/12 12:23:55 INFO DataNucleus.Persistence: Managing Persistence of Field : org.apache.hadoop.hive.metastore.model.MStorageDescriptor.sortCols [Table : `SORT_COLS`]
12/09/12 12:23:55 INFO Datastore.Schema: Validating 1 index(es) for table `SERDES`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 0 foreign key(s) for table `SERDES`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 1 unique key(s) for table `SERDES`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 4 index(es) for table `TBLS`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 2 foreign key(s) for table `TBLS`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 2 unique key(s) for table `TBLS`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 2 index(es) for table `SDS`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 1 foreign key(s) for table `SDS`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 1 unique key(s) for table `SDS`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 2 index(es) for table `SD_PARAMS`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 1 foreign key(s) for table `SD_PARAMS`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 1 unique key(s) for table `SD_PARAMS`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 2 index(es) for table `BUCKETING_COLS`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 1 foreign key(s) for table `BUCKETING_COLS`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 1 unique key(s) for table `BUCKETING_COLS`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 2 index(es) for table `COLUMNS`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 1 foreign key(s) for table `COLUMNS`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 1 unique key(s) for table `COLUMNS`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 2 index(es) for table `PARTITION_KEYS`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 1 foreign key(s) for table `PARTITION_KEYS`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 1 unique key(s) for table `PARTITION_KEYS`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 2 index(es) for table `TABLE_PARAMS`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 1 foreign key(s) for table `TABLE_PARAMS`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 1 unique key(s) for table `TABLE_PARAMS`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 2 index(es) for table `SERDE_PARAMS`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 1 foreign key(s) for table `SERDE_PARAMS`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 1 unique key(s) for table `SERDE_PARAMS`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 2 index(es) for table `SORT_COLS`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 1 foreign key(s) for table `SORT_COLS`
12/09/12 12:23:55 INFO Datastore.Schema: Validating 1 unique key(s) for table `SORT_COLS`
12/09/12 12:23:55 INFO DataNucleus.MetaData: Listener found initialisation for persistable class org.apache.hadoop.hive.metastore.model.MSerDeInfo
12/09/12 12:23:55 INFO DataNucleus.MetaData: Listener found initialisation for persistable class org.apache.hadoop.hive.metastore.model.MStorageDescriptor
12/09/12 12:23:55 INFO DataNucleus.MetaData: Listener found initialisation for persistable class org.apache.hadoop.hive.metastore.model.MTable
12/09/12 12:23:55 INFO DataNucleus.MetaData: Listener found initialisation for persistable class org.apache.hadoop.hive.metastore.model.MFieldSchema
12/09/12 12:23:55 INFO util.NativeCodeLoader: Loaded the native-hadoop library
12/09/12 12:23:55 WARN snappy.LoadSnappy: Snappy native library not loaded
12/09/12 12:23:55 INFO mapred.FileInputFormat: Total input paths to process : 1
12/09/12 12:23:56 INFO mapred.JobClient: Running job: job_201209121205_0007
12/09/12 12:23:57 INFO mapred.JobClient: map 0% reduce 0%
12/09/12 12:23:57 INFO mapred.JobClient: Job complete: job_201209121205_0007
12/09/12 12:23:57 INFO mapred.JobClient: Counters: 0
[oracle@rakesh hadoop]$
Please help. Thanks in advance.
Regards,
Rakesh Kumar Rakshit

Hi Raskesh,
Can you share the conf.xml and map.xml files you are using? I am trying to do the same (export from HIVE to oracle DB) and i get the following exception ClassNotFoundException: org.apache.hadoop.hive.metastore.TableType.
Best regards,
Bilal

Is it possible to add text when using flashing button property node?

I am trying to get a text button that displays TEST to show "running"
when it flashes. I am using a property node for flashing.
At present it cycles between TEST and default color which is set in
flashing clolor options.

hi there,
use the "Strings[4]" property of the button. right click on the property node and see online doc for more information about the meanings of the 4 elements of strings[4].
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

Unable to Export to Text when using Enterpirse

Similar Messages

Maybe you are looking for