Unable to extract all the currencies using Task Flow
Hi Everyone,
I have 60 currencies that I extract using a Task Flow in HFM 11.1.2.1 to a SQL table, I only receive 59 of those currencies FX Rates in the SQL table. The CNY currency does not extract at all.
I have tried changing the PoV around with no success. I don't think it is the PoV anyway because the other 59 currencies have no problem.
Any inputs please...
Regards,
Vinod
Sounds like this is using an EA extract process. In your Task Flow, can you extract just that one (CNY) currency? If you do this directly in Extended Analytics, is the output any different from the Task Flow? How about if you extract to a text file rather than SQL?
Similar Messages
-
Hi All,
I was trying to extract the data using 0HR_PY_1 Data Source (HR-Payroll related). When I use Full update in BW, it extracts all the records from R/3 but when I use Init load to extract the data, it is not extracting all the records(some records are missing).
So I dont know what exactly is happening. I also checked RSA7 and deleted the entry for this data source (this entry was created because we tried to do some test delta in the past).
When I goto RSA3(Extractor Checker) and use update mode "F" (along with some selection criteria employee#284), it shows 550 records which is the correct number.But when I use the update mode "C"(Initialization of the delta transfer), I just get 490 records only.
So I am thinking is there anything I need to do to reset the initialization tables somewhere on r/3 side or do some kind of settings on r/3 by which I can extract all the records by using INIT load.I noticed a weird thing in RSA3,
I tested this without any selection criteria.
Using "F" update mode, the total number of records were 173,654
Using "C" update mode, the total number of records were 176,205
So, even though I was getting less number of records by using "Full" update mode, I was able to see the latest data I wanted. But When I use "C" update mode, even though the number of records is more, still I could not see the latest data (6/2007)???
So dont know what exactly is happening!! -
How to extract all the documents posted to a condition type?
Hi,
I would like to extract all the documents using a particular condition type. Which report can i use for this?Hi,
some useful T-code for your req -
T-code - Standard program - Description
FOJUNS - SAPMF60UN_VICN0 - Enter Sales with Condition Types
FOJWNS - SAPMF60UN_VICN0 - Display Sales with Condition Types
FOPB - RFVICUP2 - Condition types with acc./def. ID
FOU2NS - SAPMF60UN - Enter Sales with Condition Types
FOU3NS- SAPMF60UN - Display Sales with Condition Types
FZCE - SAPL0WP1 - Maintain Condition Type (DW)
FZCF - SAPL0K01 - Maintain Condition Type (DD)
The full list of transaction codes is maintained in the tables TSTC and TSTCT. So, you can have a look via SE16 in your own SAP system as well.
Regards
Raj -
My Iphone was sync with Itunes on a computer then this computer broke down and i purchased another one. I was able to extract all the data from the old one. now how can i sync my phone with the new tunes without loosing any data?
Yes, windows to Mac too.
iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
Windows users see tip at: https://discussions.apple.com/message/18879381 -
Disappointed with IOS7, i had organized my music library as per the Genre and now im unable to hear all the songs of the same genre like in the earlier versions. The options of "all albums" and "all songs" are missing in this version of IOS. Help Please..
It would be nice if you told others the steps you've tried and/or how you used to have your setup.
Anyway have you tried tapping MORE this will then bring you to
the selection-list of Audiobooks, Genres, Compilations & Composers.
Selecting Genres gives you a list of all your music split into genres which was set within the Music downloaded via iTunes or uploaded from CD or which you may have set yourself.
Then you just select the Genre you want:
If certent songs are not correctly gategorised you may need to go into iTunes and reselect via Get-info
>Info>Genre and change it there. That way you should end up with all songs of Jazz or other in 1 place. -
I'm unable to scroll down the page using laptop touch pad.
My FF was updated automatically. I'm unable to scroll down the page using the laptop touch pad scroll option.
It was working fine on FF before upgrade and after upgrade on IE browser. But, in FF 9 it is not working. Any help is appreciated.Type '''about:config''' in the address bar and hit Enter key. When you see a warning, click '''I'll be careful, I promise!''' button
-> In the '''Filter bar''', type '''trackpoint'''
* right-click '''ui.trackpoint_hack.enabled''' preference, click '''Modify''' and change the value from '''-1''' to '''0''' (zero) or '''1'''
* click OK
-> Close '''about:config''' tab and Restart Firefox
Check which value (0 or 1) works.
Not related to your problem but do the following:
-> Update Firefox to the latest version 10
* [[Installing Firefox on Windows]]
-> Update All your Firefox Plugins -> https://www.mozilla.org/en-US/plugincheck/
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)''' -
How to extract all the dates given in a date Range.
Hi,
I would like to extract all the date given in a date range select option field, Kindly let me know how is
it possible in most optimized way,
Regrd
AliHi,
You can code like below.. Declare the Ranages and use those ranges to append the data.
Ranges : R_date for Table-date.
R_date-Sign = I
R_date-Option = BT
use the Select statment SELECT * FROM TABLE INTO ITAB WHERE DATE IN S_DATE.
use the append statmenets to APPEND R_Ranges.
Regards
Thiru -
Extract all the data grids in one click
Hi All,
I need to download all the data forms that i have in the system.
We have a fat hierarchy and i'm looking for a short way to extract all the data grids without extracting from every folder in the hierarchy separately.
I don't care about the type of the file/files. it can be one long file...
Do you know what action i can perform here?
Thanks,
OritHi,
What operating system are you using? What version of Excel are you using? It's possible you are using a version of Excel we do not support. Also, can you send me an email with your exported Excel file, so I can try opening it myself? My email address is [email protected]
Thanks,
Todd -
Hi, my laptop just crashed and I was unable to retrieve all the pictures saved in it. However, I have a backup on my iPod touch. Is it possible to sync pictures from my iPod to my laptop? Thanks.
Sync with "new" computer
https://discussions.apple.com/docs/DOC-3141 -
What are all the tables used for this report:
hi
what are all the tables used for this report:
report:
<b>Stock Report, which will give opening balance, receipt, issue, and closing balance for any given Duration for any material.</b>
thanks in advanceTables: MSEG, MKPF, MARD.
FOR REFERENCE SEE TRANSACTION : MB5B.
Message was edited by: Sharath kumar R -
HI,I am unable to see all the tabs in ACC, getting the following error
I am unable to see all the tabs in ACC, getting the following error.
ERROR [ComponentAgent] Request for URL:
http://sathya-PC:8080/dyn/init-session did not return a valid session.
Please check your settings for siteHttpServerName, siteHttpServerPort,
webApplicationPrefix and initSessionURL for component
/atg/devtools/DevSessionManager/_2/atg/devtools/ComponentAgent
serverport : 8860
servername : localhost
Note:I included DCS in Manifest and Run the DCS in SQL
Please Help me out from this issue
ThanksVerify and chage if required.
Ports are configure at /atg/dynamo/Configuration component,
httpPort , httpsPort , drpPort , fileDeploymentPort , rmiPort , fileSychronizationDeploymentPort , adminPort , siteHttpServerPort
Noramly :
siteHttpServerPort and adminPort: app server port
Thanks,
Nitin. -
How to set a specific width to all the TextInputs used in a mxml file on its creation complete?
Hi subhajit nag,
I think the best approach would what I say is if you can make use of a Global variable or using a Singleton class having a variable which can be accessed globally through out the application.
Below is the sample what I am talking to:
So in below example you can access the variables textInputWidth and textInputHeight globally throghout the application since you have decalred them in main mxml file.
You can access these variabled in another mxml file as Application.application.textInputWidth and Application.application.textInputHeight. So if at all you are required to modify these values you are only required to modify at a single place in main mxml file..thats it.
If you are use any Singleton classes like ModelLocator you can place these variables in this class and refer from that class.
Hope this resoved your problem..
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical">
<mx:Script>
<![CDATA[
[Bindable]private var textInputWidth:int = 250;
[Bindable]private var textInputHeight:int = 25;
]]>
</mx:Script>
<mx:Canvas id="canvas1">
<mx:TextInput id="txt1" width="{textInputWidth}" height="{textInputHeight}"/>
</mx:Canvas>
<mx:Canvas id="canvas2">
<mx:TextInput id="txt2" width="{textInputWidth}" height="{textInputHeight}"/>
</mx:Canvas>
<mx:Canvas id="canvas3">
<mx:TextInput id="txt3" width="{textInputWidth}" height="{textInputHeight}"/>
</mx:Canvas>
<mx:TextInput id="txt4" width="{textInputWidth}" height="{textInputHeight}"/>
<mx:TextInput id="txt5" width="{textInputWidth}" height="{textInputHeight}"/>
</mx:Application>
If this post answers your question or helps, please kindly mark it as such.
Thanks,
Bhasker Chari -
What r all the tables used for this report. please reply
hai,
what r all the tables used for this report.
report :
<b>
Report to display all finished goods that go out-of-stock. Developed a drill down report for materials details (totals and subtotals for material stock values by material group and material type).</b>
thanks in advancehi Ashok,
Check this out
http://www.allsaplinks.com/tables.html
http://www.sapgenie.com/abap/tables.htm
Regards,
Santosh -
How can I see all the idocs used in the system
I am very new in this area. How can I see all the idocs used in the system. Those which are posted and those which are not.
Check thes sap help links:
http://help.sap.com/saphelp_nw70/helpdata/en/90/c4b523c4c411d2a5ee0060087832f8/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/d5/edf15ddcdc11d1890c0000e8216438/content.htm
- Regards, Dibya -
Unable to sync to the iTunes using PC
why my iPad unable to sync to the iTunes using PC where an error message shows "iTunes could not connect to the iPad because an invalid response was received from the device."
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
Cheers, Tom
Did you get an error message number? See this similar post.
https://discussions.apple.com/message/24102115#24102115
Maybe you are looking for
-
I'm trying to buy a song and it won't let me a page keeps popping up telling me to answer these two questions like what was your first pets name and what was your childhood nickname and I forget the answers and it says I will be locked out of my appl
-
URGENT: Modeled deadline leg not running!
Hi there, I hope you can help me, I have just completed a "purchase requisition release" workflow in our SAP system. It is a copy and enhancement of WS00000038. I have put a latest end deadline monitoring on the "release requisition" step, it is ACTI
-
Problem with downloading free apps from app store
i am trying to download free apps from app store on my iphon 5s, but its neither updating neither downloading apps
-
Firmware 1.1.1..Thank you for your help
After reading this forum for an hour, I'm a little nervous. I ahev a ton of songs onmy ipod but need to update to this firmware to get the audio working on the movies I imported..Are there any cons to updating this 1.1.1 firmware? 1. Will I lose all
-
I have installed UCM 11g on weblogic server 10.3.4 but i am unable to access webdav. i am using the following link http://localhost:16200/_dav/cs/idcplg/webdav/ first it ask for username and password and after entering the username and password it sh