Unable to extract data from 0HR_PA_PD_2 datasource

Hi,
I am extracting the data from 0HR_PA_PD_2 (Appraisals) datasource to the cube 0PAPD_C02 (Appraisals).Though the data available in R/3 (83 records,checked in RSA3) it is giving the message "No data available in the source system".I checked the RFC connection,IDOCs,SM58 for any message.But everything is fine.In the status tab ,it is showing "Info IDoc received with status 8".But the data is available in R/3.
Please help me if any one faced this type of issue or is there any other steps has to be followed.
Thanks & Regards,
Dinakar.

Hi Dinakar,
Check Roberto's reply in this thread... It might help you...
Re: Problem in InfoPackage for Billing Document Item Data(2LIS_13_VDITM)
Also check these related threads...
Info IDoc received with status 8. - extracting data from R/3 -co-pa
Info IDoc received with status 8. - extracting data from R/3
error while doing init load ..Idoc received with status 8
Info Idoc received with status 8
Regards,
KK.

Similar Messages

Error while extracting data from Generic datasource

Hello Gurus,
I have encountered an error "Errors in source system" with status red while extracting data from generic datasource into DSO.
I have done below things:-
1. Checked the jobs in source system, the job is successfully completed
2. The generic datasource is active and supporting delta with calender day in source system.
3. No TRfc error and no idocs stucked.
4. No short dumps in source system.
5. The delta queue(RSA7) is showing 0 with status as green.
6. Replicated the datasource On BW side and also activated the transfer rules by RS_TRANSU_ACTIVATE_ALL
The problem has not yet solved. Could you guys please suggest me what might be the reason for this error......
Thanks,
Sonu

Hello,
I have used the generic delta using calender day.
Safety upper limit : - 1
Safety lowerr limit : - 0
I have made the entries in va01 transaction, but the delta queus is not getting updated which should show 1.
Do Generic extraction require any job to transfer data from Database table to delta queue.
We are not able to get the delta records on BW side. Please suggest.
Please suggest.
Thanks,
Sonu

Unable to extract data from an AS/400 system.

Hello experts.
We are trying to extract data from an AS/400 system but not having any success until now.
I´ll write down you the stepts that we have followed until now:
1.- Create a DB Connect between both systems
2.- Create a Source System from AS400 in the workbench under DB Connect Directory
3.- Generate datasources from tebles specified in the schema of the connection
break point -
At this point, we had a problem with some tables with at least one fieldname containing character "Ñ".
After asking some possible solutions to SAP, the told us this is not supported, as the system can´t have any object with character "Ñ", so the transfer structure was unable to activate with this fields in the datasource.
--- end of brek point --
4.- After those issues, we´ve decided to implement, in another schema, views from those tables which had the fieldnames with that character "Ñ", changing them to an "N".
5.- We´ve created another source system with that schema, and user than can see that schema.
6.- To be able to see those views, in transaction RSDBC, we had to deactivate the two checkboxes in the first window ( Choose tables and Choose views) .
7.- Right afeter, we could generate correctly the datasources from this logical tables.
8.- We have designed the hole dataflow for this datasources and everithing went rigth.
9.- But wen we tried to execute the infopackage to extract data from those logic tables, we cannot get any registers. Acctualy the charge remains yellow after the job have finished.
Please, I would appreciate any help you could give us on this problem.
Thank you very much
Regards
Joaquin

I´d like ti add something to this thread, and maybe clarify a littel bit the question.
The only way that the BW system recognizes those logical tables, through transaction RSDBC is checking out the two boxes on this transaction, "Select Tables" and "Select Views".
I don´t know haw these logical tables have been created, bus does this mean that the are not neither tables or views as BW understand them.
Please, if someone knows anythin about this, answer to this thread.
Thank you very much.
Joaquin Sobrido

Extracting data from multiple datasources through DAC

We have to extract data from two Oracle datasources (GL datasource 1 and GL datasource 2) by DAC client to one Datawarehouse. We have configured DAC for one datasource and it is working fine. How can we add another datasource into the same DAC client.
Neeraj

You will need to update the Source DB connections in both the DAC and Informatica Workflow before you want to load the DW with the other GL Database. You will contnuously have to switch these configuration settings or stand up another DAC Server, Repository and Client that point to the same Datawarehouse.

Unable to extract data from R/3 into BW 3.5

I have just started learning BW. I am currently trying to upload data from R/3 into BW. I have tried uploading data into InfoCube , ODS, InfoObjects from R/3 and in all cases I am getting error messages. Please shed some light as the what am doing wrong......below are the steps that I have done
For loading transaction data from R/3 in ODS
1. Created view from VBAP and VBAK tables in R/3
2. Created Transaction type DataSource in R/3 using RSO2 transaction
3. Replicated above DataSource in BW under Source Systems. using 'Replicate DataSource'
4. Created ODS object along the same lines as the above created view in R/3
5.Created InfoSource and assigned the replicated DataSource
6. Activated the Transfer Rules, Transfer Structure, Communivcation Structure
7. Created Update Rules for ODS and activated them
8. Created InfoPackage and started the Data Request
The error message that I see in Monitor is as below
Requests (messages): Everything OK
         Data request arranged
         Confirmed with: OK
Extraction (messages): Missing messages
         Missing message: Request received
         Missing message: Number of sent records
         Missing message: Selection completed
Transfer (IDocs and TRFC): Errors occurred
         Request IDoc : IDoc with errors added
Processing (data packet): No data
I am getting the same error message when I try InfoCube instead of ODS.
Please let me know what is wrong
Vidya

I checked the 'Details' and 'Status' tab page in Monitor
On Status Page it says
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
On Details Tab page, it says
Requests (messages): Everything OK
Data request arranged
Confirmed with: OK
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : IDoc with errors added
Processing (data packet): No data

Extract data from datasource 0APO_MSP_CHECK_ORDER error

Hi,expert. Happy new year. I met a problem today,when I use TCODE RSA3 to extract data of datasource ,0APO_MSP_CHECK_ORDER,I got an error.
1. Follow-up error
Follow-up error
Message no. /SAPAPO/OM_ERROR184
2. om_other_failed
( om_other_failed )
Message no. /SAPAPO/OM012
So, I can't extract data from this datasource.
The datasource 0APO_MSP_SLOT had the same error too.
PLZ help me. Thank you very much.
Happy new year.

It has been solved.

FM to extract data from Datasource

Hi,
Can any one of you suggest me an idea or let me know where to start and how to start ?
I want to write a ABAP code/ create a Function Modules which extracts data from a DATASOURCE be it any on condition(say date) and the output given should be filtered on some fields
Does a standard datasource be extracted using a custom FM?
Are there any standard FM to do this?

Hi,
go to the TX- SE80 and create the function group.
after take the FM - RSAX_BIW_GET_DATA_SIMPLE
please look at the below doc it will help.
Generic Extraction based on Function Module
Thanks,
Phani.

How the data extraction happens from HR datasources from R/3 to BW system.

Hello All
How the data extraction happens from HR datasources from R/3 to BW system.Incase of delta records ( for CATS datasources ) ,Is there any flow like LO .
Incase of Full and delta loads how does the data will be taken from R/3 to BW,DO we need to fill setup tables ?
Searched forum but couldnt able to find the relevant one.
Thankyou
Shankar

Hi Shankar.
HR Datasources do not have setup tables . Though before implementation, certain customizations should be done and the delta loads have dependency on other data sources. Also you must have implemented Support Package SAPKH46C32, or have made the relevant corrections in SAP Note 509592.
Follow this link for details on customization and dependencies for all CATS datasources.
http://help.sap.com/saphelp_nw70/helpdata/en/86/1f5f3c0fdea575e10000000a114084/frameset.htm
Regards,
Swati

How to extract data from structures or create a datasource using structures

Hello Friends , I have a requirement to extract data from ECC fields, but when i go look the table i found only "structures" REBD_CONTRACT_REL_L and i confirmed with ecc team that there are no table available with these fields so how do i now extract the data in BI using the fields in ecc that exist only in these Structures.
Please help me to resolve this
Thanks
Regards
Soniya

check tables
VIOBOV
(VIBDPLANOCC certainly not)
VICNCN table of the contrat
VIOROF table of the offers
VIBDOBJASS affectation of objects.
VICAINTRENO Affectation INTRENO / OBJNR / IMKEY
that will be a good start but ask again your functional persons.
If you want to upload data to BI you have to know the tables
bye
by the way a structure do not hold data.

Error when extracting data from R/3 into BW

Hi,
There is an infoobject Payscale Level(Datsource 0paysclaelv_attr) in BW module HR that is extracting data from R/3. While extracting data, the following error occurs "Assignment to feature PFREQ did not take place". I debugged the standard function module HR_BW_EXTRACT_IO_PAYSCALELV and I believe there is definitely an error in the data. But Im not able to find out that record. Has anyone come across this error before? Please let me know if theres any solution to this error. The help for this error provides the following details. But I havent understood it. Any help would be greatly appreciated.
You can assign a specific operation (assignment) to each decision option
within a feature. You can also define decision option ** whose
assignment is effected for all unlisted decision options (this is known
as a default value).
Example:
o                D PERSK
o     K1           &ABRKS=D1,    <- D1 for employee subgroup K1
o     K2           &ABRKS=D1,    <- D1 for employee subgroup K2
o     K3           &ABRKS=D2,    <- D2 for employee subgroup K3
o     **           &ABRKS=D0,    <- D0 for all other employee subgroups
If you now create employee subgroup K4 and the default entry ** is
missing, the system is unable to find a decision option for payroll area
ABKRS.
Procedure
    Define a decision option for K4 or for default value **.

Hi ,
The error is due to the existing customizing of feature PFREQ for MOLGA = 05, there the value to be returned depends on the WERKS, but apparently it was forgotten to add a new line for the "Otherwise" case.
Like it was already done for the case of MOLGA = 03, for example. Please add then a line for MOLGA = 05 and "Otherwise" and the issue should be solved.
If this doesnot solves your issue , then kindly check these OSS notes :
1033423 -> 0PAYSCALELV_ATTR: Short dump feature_error
842212   -> 0PAYSCALELV_ATTR: DataSources deliver wrong results
92055     -> RP_FROM_PERIOD_TO_PERIOD: FEATURE_ERROR dump
Regards,
Lokesh

When I extracting data from DSO to Cube by using DTP.

When i am extracting data from DSO to Cube by using DTP.
I am getting following erros.
Data package processing terminated (Message no. RSBK229).
Error in BW: error getting datapakid cob_pro (Message no. RS_EXCEPTION105).
Error while extracting from source 0FC_DS08 (type DataStore) - (Message no. RSBK242).
Data package processing terminated. (Message no. RSBK229).
Data package 1 / 10/04/2011 15:49:56 / Status 'Processed with Errors'. (Message no. RSBK257).
This is the brand new BI 7.3 system. Implementing the PSCD and TRM.
I have used the standard business content objects in FI-CA (dunning history header, item,activities) and standard Datasource (0FC_DUN_HEADER ,0FC_DUN_ITEMS, 0FC_DUN_ACTIVITIES). I have extracted data till the DSO level . when I try to pull the data to info provider level(cube) using DTP . I am getting fallowing error.
my observation: when ever I use the DSO as source to any target like another DSO or cube. its throwing same kind of error for any flow including simple Flat file .
please suggest any one whether do I need to maintain basic settings since its a brand new BI 7.3.
please help me out on this issue . I am not able to move forward .its very urgent

hello
Have you solved the problem ?
I have the same error...
as you solve this error,
can you help me please I have the same error
yimi castro garcia
[email protected]

How can I join 3 tables while extracting data from SAP R/3?

I have 3 tables with the following columns
Emp table (emp)
emp_id
emp_name
emp_add
Dept table (dept)
dept_id
dept_name
dept_loc
Location table (loc)
loc_id
loc_name
Now. If I want to select data from loc_id = 10 and emp_id between 2000 and 3000
How to join these three tables while extracting data from R/3
join condition
loc.loc_id = dept.loc_id
and dept.dept_id = emp.dept_id
and loc.loc_id =10
and emp.emp_id between 2000 and 3000.
Could any one let me know the procedure to extract this data into BW system.

Hi,
shouldn't your join condition be:
loc.loc_id = dept.DEPT_LOC
and dept.dept_id = ??
If you can join the three tables then create a generic datasource (RSO) based on a view (create your view with your join in SE11).
Enable the loc_id and the emp_id as selectable in the datasource so you can then select the values from a BW IPack.
hope this helps...
Olivier.

Extracting data from Z-table from SAP R/3 to BW

Hi all
I want to extract data from a Z-table from SAP R/3 system to Bw system. Currently I am on BW 3.5. Since it is a Z table I dont have a standard extractor for it & I dont knw how to create it. Can anyone provide me with the step-by-step documentation of how to extract data from a non standard SAP table????

Hi
You need to create Generic Datasource on the Z-Table you want to get data from
Go to RSO2 transaction to create generic datasource .
You need to give technical name of datasource under datasource type you want and click on create. Then you can give descrption and Application component under which u want see the datasource,
enter the z table name under view/ table and save.
here you can click on check boxes to make fields hidden or selection fields.
Regards
Ravi
Edited by: Ravi Naalla on Aug 25, 2009 8:24 AM

How to extract data from multiple tables (always got errors)

Dear Experts,
I have a simple mapping to extract data from multiple tables as a source (A, B, C) to a target table (X). Below is the picture:
(Sources)....(Target)
A----------------***
B----------------X
C----------------***
Sample Source Data:
Table A:
ColA1
100
200
etc
Table B:
ColB1 ColB2 ColB3
10 Y Ten
20 Y Twenty
30 Y Thirty
etc
Table C:
ColC1 ColC2
11
12
13
etc
Target table (X) should be (just has 1 group INGRP1):
ColA1 ColB1 ColB3 ColC1
100 10 Ten 11
100 10 Ten 12
100 20 Twenty 21
etc
Scenarios:
1. Directly map from A, B, C to X. Unable to map with error message: "API8003: Connection target attribute group is already connected to an incompatible data source. Use a Joiner or Set operator to join the upstream data first before connecting it into this operator."
2. Map each source to Expression Operator and then map from each Expression to target table. I am able to map all attributes successfully but got error when validating it with message: "VLD-1104: Attributes flowing into TEST.EXPR_SRC.INGRP1 have different data sources."
How can I achieve the correct mapping for this purpose?
Use Joiner? I have no key to join the sources
Use Set? The sources have different number of columns
Thanks in advance
Prat

Thanks Nico,
I think it will results data like this:
100 10 Ten 11
200 20 Twenty 12
300 30 Thirty 13
etc
and not the expected:
100 10 Ten 11
100 10 Ten 12
100 20 Twenty 21
etc
But it inspired me to solve this by adding key expression in each source table (B & C) to be joined to table A with this formula:
100+TRUNC(INGRP1.COLB1,-2)
Regards
Prat

How to extract data from the fields present in two or three tables

Hi Experts,
I have a scenario where i have to extract data from the fields of different tables. e.g. let there 2 tables which have some number of fields . I want the data of 3 fields each from these 2 tables. How can i get that??
Sam

Hi
You can create view in tcode se11..
here you include all tables from which you want to fetch the data..
you need to give selection condition here
eg..
say select empname from table A, select empadd from table B.. where empno(from A)=empno(from B)
(note that you dont need to write queries like this.. i have just given u the example)
After creating the view you can create datasource in RSO2..
Regards
Swati

Unable to extract data from 0HR_PA_PD_2 datasource

Similar Messages

Maybe you are looking for