Unable to fax from Mac OS X 10.6 but otherwise C7280 works fine

Dear HP,
I have a C7280 connected to our LAN via RJ45 and to a phone line using the provided cord. It works fine as a stand alone fax to send and receive faxes. However, when I try to fax from my Mac (OS 10.6.8) with the most current drivers, it doesn't connect to the telephone line and only prints a couple of garbled pages on the printer. When I run a fax test from the front panel it passes all tests. I can't think of anything else to try so I am hoping you have a solution.

Hello JohnF377, and welcome to the HP Forums.
I see you are running into fax issues. I would like to help.
I would recommend utilizing this document on Digital Fax to Mac.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

Unable to fax from mac with Yosemite on HP Officejet 8600 Plus :(

Ever since I have updated to yosemite I have been unable to fax from mac with Yosemite on HP Officejet 8600 Plus
Please help and provide needed update....

Hi @JediTiger,
Thank you for visiting the HP Support Forums. I see you are running into some fax issues with you HP Officejet 8600 since upgrading to the Mac Yosemite 10.10 Operating system. Please go ahead and get started below:
Scrub/ Uninstall
• Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
• Click continue, click on one of the printers in the list.
• * Only do this step if you do not have any other HP Printers. Hold down Control, Option and Command, While holding the three buttons down,
• Click uninstall.
Reset Printing System
1. Click the Apple icon ( ), and then click System Preferences.
2. In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
3. Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
4. Click OK to confirm the reset.
5. Type the correct Name and Password.
6. Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol..
Repair Disk Permissions
1.On the Dock, click Applications, and then click Utilities.
2.Double-click Disk Utility.
3.Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
4.Click the Repair Disk Permissions button at the bottom of the window.
5.Once the repair is complete, restart the computer.
Restart the printer. Now you can download and install the printer software and install it. Click on the link below to begin the download and follow the on screen instructions:
HP Officejet Pro 8600 series Full Feature Software and Drivers
I hope this helps, please let me know the outcome!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Faxing from mac

Artisan 810 unable to fax from Snow Leopard error message "Waiting for modem to become available" obtained

supplied a file link containing info using Windows operating system.
Did you supply them with your Mac operation system? Did you call them?
Artisan 810 should have come with a user manual which should have included a troubleshooting section.

Anyone unable to print from Mac Pro using lion 10.7.2 to HP LaserJet M1319f mfp

I'm unable to print from Mac Pro using lion 10.7.2 to HP LaserJet M1319f mfp. The HP website says that the HP LaserJet M1319F MFP is compatible with Lion 10.7.2. Every time I try to perform a Test print I get an Error msg. I'm using driver version 1.3.0.261

https://discussions.apple.com/message/23765195#23765195

How to fax from mac?

How to fax from Mac? I have Epson Artisan 810 All in one (Print,fax,scan and copy)

Generally speaking all such features are now integrated in OS X's Print dialog.
File > Print, choose your printer and select "Send Fax" from the dropdown menu:
Fill in the fax number and click Add to add it to the destination list:
... then click Print and your print / fax will dial the phone and send the fax.

Hi guys. gota 2010 mac mini but want to upgrade so i can stream from mac mini to apple tv. but some herd some bad reviews about os x moutain lion. any of it true?? to mountain lion

hi guys. gota 2010 mac mini but want to upgrade so i can stream from mac mini to apple tv. but some herd some bad reviews about os x moutain lion. any of it true?

Mountain Lion is the best OS yet, IMHO.

I pull fiftyfour bytes of data from MicroProcessor's EEPROM using serial port. It works fine. I then send a request for 512 bytes and my "read" goes into loop condition, no bytes are delivered and system is lost

I pull fiftyfour bytes of data from MicroProcessor's EEPROM using serial port. It works fine. I then send a request for 512 bytes and my "read" goes into loop condition, no bytes are delivered and system is lost

Hello,
You mention that you send a string to the microprocessor that tells it how many bytes to send. Instead of requesting 512 bytes, try reading 10 times and only requesting about 50 bytes at a time.
If that doesn�t help, try directly communicating with your microprocessor through HyperTerminal. If you are not on a Windows system, please let me know. Also, if you are using an NI serial board instead of your computer�s serial port, let me know.
In Windows XP, go to Start, Programs, Accessories, Communications, and select HyperTerminal.
Enter a name for the connection and click OK.
In the next pop-up dialog, choose the COM port you are using to communicate with your device and click OK.
In the final pop
-up dialog, set the communication settings for communicating with your device.
Type the same commands you sent through LabVIEW and observe if you can receive the first 54 bytes you mention. Also observe if data is returned from your 512 byte request or if HyperTerminal just waits.
If you do not receive the 512 byte request through HyperTerminal, your microprocessor is unable to communicate with your computer at a low level. LabVIEW uses the same Windows DLLs as HyperTerminal for serial communication. Double check the instrument user manual for any additional information that may be necessary to communicate.
Please let me know the results from the above test in HyperTerminal. We can then proceed from there.
Grant M.
National Instruments

HT201269 I downloaded from Icloud my backup to new 5S. Everything worked fine except from one of my accounts it show I have 394 unread messages. Which is correct but I have read all these on my 4S. How do I show zero and only read new messages?

I downloaded from Icloud my backup to new 5S. Everything worked fine.
However it shows I still have 394 unread messages. Which correct on this new 5S Iphone but they were all read on my old 4s.
How to I zero out the 394 and only start reading new messages on this new 5S.
Please do not tell i have to delete all 394 messages.
Richard

The process depends on who controls your email. If you have (username)@mac.com, (username)@me.com or (username)@icloud.com you've come to the correct place. For any other mail server, you need to contact their specific user support tools.

HT204053 i have an itunes library with 1,000+ songs on a pc. my daughter has a macbook air and i loaded my apple ID onto it. how do i get the songs from my itunes account to show up? This works fine on her iPhone, but having trouble on the new macbook

i have an itunes library with 1,000+ songs on a pc. my daughter has a macbook air and i loaded my apple ID onto it. how do i get the songs from my itunes account to show up? This works fine on her iPhone, but having trouble on the new macbook air

Hey kbert73
I would do a transfer of purchases from the phone and not sync. If you sync then it will want to start over and sync music that is on the MacBook Pro. If you want to transfer the music, check out the article below that will give you multiple options on how to move. I have also provided on how to sync with multiple computers.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
Thanks for using Apple Support Communities.
Regards,
-Norm G.

When I upgraded my iMac to Lion I can no longer connect the iPad 2 to WiFi. It gives me a message unable to search for WiFi. Before the upgrade to Lion it worked fine. What gives?

When I upgraded my iMac to Lion I can no longer connect the iPad 2 to WiFi. It gives me a message unable to search for WiFi. Before the upgrade to Lion it worked fine. What gives?

Could there be a setting I need to adjust in the iPad2? When I try to turn on WiFi and enter the name of the WiFi that I have established, including the security type and the password, I get the message "Could not scan for wireless networks." Is there a setting in iCloud or other location that needs to be changed?

Why can't i update itunes on windows xp? It says update server could not be contacted but internet is working fine. I'm trying to go from itunes 10 to itunes version 11

why can't i update itunes on windows xp? It says update server could not be contacted but internet is working fine. I'm trying to go from itunes 10 to itunes version 11

Windows System Requirements
PC with a 1GHz Intel or AMD processor and 512MB of RAM
Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
64-bit editions of Windows Vista, Windows 7, or Windows 8 require the iTunes 64-bit installer
400MB of available disk space
Broadband Internet connection to use the iTunes Store
See Here > http://support.apple.com/kb/TS3125
From Here > http://www.apple.com/support/itunes/troubleshooting/

The enter key is not working in firefox but it has working fine in chrome and IE so please help me to rid out from this.

The enter key is not working in firefox but it has working fine in chrome and IE so please help me to rid out from this.

Hello gokulaan, '''try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Hello, I've just tested my form on all mac navigator (safari, google chrome, opera, firefox) everything works fin, but I've encountered a message error when i tested it on a pc (windows 8, explorer 11.0) : [ref: 4TjwhtHy2SB5C8LI-Eku2A, serverError]-

Hello, I've just tested my form on all mac navigator (safari, google chrome, opera, firefox) everything works fin, but I've encountered a message error when i tested it on a pc (windows 8, explorer 11.0) : [ref: 4TjwhtHy2SB5C8LI-Eku2A, serverError]…

Hello, I've just tested my form on all mac navigator (safari, google chrome, opera, firefox) everything works fin, but I've encountered a message error when i tested it on a pc (windows 8, explorer 11.0) : [ref: 4TjwhtHy2SB5C8LI-Eku2A, serverError]…

I copied several MOV files to a CD. When I play them from the CD the video is fine but the audio works fine for the first few seconds then stops (using Qicktime Player 7.7.1. Everything works fine if I use VLC Media Player. Does anyone have any idea why?

I copied several MOV files to a CD. When I play them from the CD the video is fine but the audio works fine for the first few seconds then stops (using Qicktime Player 7.7.1. Everything works fine if I use VLC Media Player. Does anyone have any idea why?

My purpose for copying to a CD or DVD is so that I can make copies and send to friends and relatives. What is the best way to get these files on a CD/DVD with the right codecs?
The easiest thing to do is to simply tell your friends and relatives to copy the files to their local hard drive before playing them. Your basic problem is that data discs have a limited real time transfer rate. Since you say VLC plays the files fine, I might suspect its player is likely buffering the data while the QT 7 Player is not.
Data discs made for playback directly from the CD or DVD are normally encoded using MPEG-4/AVC (H.264) video with AAC audio. This is a modern codec which has specific settings to re-package the data (i.e., must be encoded using the multipass option and then select the "optimize for CD/DVD" option).

TS3048 My wireless mouse has stopped working after I recharged the batteries,the green light does not come on. I swapped the batteries from the mouse to my wireless keyboard and they work fine in the keyboard.

My wireless mouse has stopped working after I recharged the batteries,the green light does not come on. I swapped the batteries from the mouse to my wireless keyboard and they work fine in the keyboard.What can I do?

Hello:
Try resetting the SMC and PRAM.
Barry

Unable to fax from Mac OS X 10.6 but otherwise C7280 works fine

Similar Messages

Maybe you are looking for