UNABLE TO FILLED DATA IN INFOCUBE

Hi Gurus,
1 I'm unable  to  activated and filled 0IC_C03 ınfocube
2 how can i do with 2LIS_03_BX and 2LIS_03_BF data sources according to procedure.
3.How BI Reporting is much better than Abap Query .
Regards
Meenakshi Sharma

Hi
Check this thread:
Re: difference between ABAP & BI reports
Regards
Chandra Sekhar T

Similar Messages

  • Unable to fill data in Structure

    Hello,
    i am new to ABAP, started learning a week ago. i am trying to create a structure with 3 fields from two sap tables. Later, i need to fetch data from sap table to populate the structure and display. i am getting an error like "workarea does not contain corresponding components" and when i execute data will be populated in structure but the number of rows is shown (number of rows is 20 but all blank values) i write my code as follows.
    TABLES vbak.
    TABLES vbap.
    SELECT-OPTIONS: so_vbeln FOR vbap-vbeln.
    TYPES: BEGIN OF ty_item,
       salesdoch TYPE vbak-vbeln,
       salesdoci TYPE vbap-vbeln,
       materno TYPE vbap-matnr,
       END OF ty_item.
    DATA: gt_vbak TYPE STANDARD TABLE OF vbak,
           gs_vbak TYPE vbak,
           gt_vbap TYPE STANDARD TABLE OF vbap,
           gs_vbap TYPE vbap,
           gt_item TYPE STANDARD TABLE OF ty_item,
           gs_item TYPE ty_item.
    SELECT vbeln FROM vbak INTO CORRESPONDING FIELDS OF TABLE gt_vbak
       WHERE vbeln IN so_vbeln.
    IF gt_vbak IS NOT INITIAL.
       SELECT vbeln matnr FROM vbap INTO CORRESPONDING FIELDS OF TABLE gt_item
         FOR ALL ENTRIES IN gt_vbak
         WHERE vbeln EQ gt_vbak-vbeln.
    ENDIF.
    LOOP AT gt_item INTO gs_item.
       WRITE: gs_item-salesdoci.
    ENDLOOP.
    can you please help me how can i fix this issue.

    Hi Prasad,
    In below query your are retrieving data from field VBELN and MATNR of table VBAP, but if you check structure of internal table gt_item, its filds are salesdoch,  salesdoci,
    materno . So system gets confused as in which fields of iternal table gt_item it has to place the records.
       SELECT vbeln matnr FROM vbap INTO CORRESPONDING FIELDS OF TABLE gt_item
         FOR ALL ENTRIES IN gt_vbak
         WHERE vbeln EQ gt_vbak-vbeln.
    To resolve above issue you need to mention VBLEN, POSNR and MATNR instead of
       salesdoch,  salesdoci,  materno fields in structure  ty_item.
    Thanks & Regards,
    Padmakar Kudtarkar

  • Unable to view data in the InfoCube as well as in the query

    Hi all,
    I have done the Init Load into an InfoCube 0Pur_c01. The Monitoring status is Green. I checked the Qm status which is green. There is data in the PSA.
    However, I am unable to view data in the InfoCube. Also when I execute the report I am receiving 'Application Data not found'error.
    It looks to be a strange sitaution.
    Please help me out
    Regards
    YJ

    Hi,
    I hope, some times the the unavailability of "PROCESSKEY" value for the records delivers like this.
    Refer the note: 353042
    And also refer the links:
    Re: Problem extracting 2LIS_03_BX into 0IC_C03
    Re: Records Not Added
    And also search this forum with "PROCESSKEY"
    With rgds,
    Anil Kumar Sharma .P

  • Error:Unable to determine data basis for virtual InfoCube.

    Hi all,
           I am working on Virtual cubes. I have created a query on virtual cube which is getting loaded from a transaction cube. I am using  a transaction cube which is a  copy of standard cube <b>0BCS_C10 - Consolidation (Company/Profit Center).</b> (Transaction cube).
    When I execute the query in BEX it is disconnecting from the server and if I execute the same in transaction <b>RSRT</b> it is showing following errors.
    1.Unable to determine data basis for virtual InfoCube.
    2.Error reading the data of InfoProvider.
    3.System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
    Will be thankful for suggestions.

    Hi Pankesh,
    Thanks for the response..
            Transaction cube contains data and characteristics of virtual cube are  consistent.
              I am trying to see the contents of the virtual cube in transaction <b>LISTCUBE</b>, there also its showing same errors.
    How can I proceed now?

  • Unable to capture data from drop down list in custom added field in migo tcode at item level

    Hi guys,
    need bit help in resolving query related to custom added field in Tcode migo.
    i have added a field in migo at item level ,in this i have used drop down list
    to get data but unable to capture data from drop down list.gown through
    many blogs in scn but unable to resolve.
    Please help me out in this.
    Thanks,
    Umakant.

    Hi,
    U can use following code to fill the list box
    write this code in PBO
    In layout editor please select listbox in dropdown attribute of input field and put some fctcode attribute
    TYPE-POOLS vrm.
      DATA values TYPE vrm_values WITH HEADER LINE.
      TABLES: <ur custom Database table>.
      clear values, values[].
      SELECT * FROM <ur custom Database table>.
        values-text = <TABLE FIELD TO DISPLAY IN DROPDOWN> .
        values-key = <TABLE KEY FIELD TO DISPLAY IN DROPDOWN>.
        APPEND values.
      ENDSELECT.
      CALL FUNCTION 'VRM_SET_VALUES'
        EXPORTING
          id              = '<SCREEN INPUT FIELD NAME>'
          values          = values[]
        EXCEPTIONS
          id_illegal_name = 1
          OTHERS          = 2.
    Also please define the following before accessing the listbox value
    data: <listbox input field name> type <table field name>,
            <inputfield name where text to display> type string  in top include
    In PAI, select the text from the table into <inputfield name where text to display>  depending on value selected which will be called when enter key is pressed or any vale is selected

  • DropDrown unable to get data in ALV

    Hi,
    I'm trying to put an dropdown by key (or index) into an ALV but I'm unable to get data in the dropdown. Can someone please help me with this?
    I was watching this threads on topics at the forum, but I can not solve this problem.
    Copy my code.
      DATA: lr_col                            TYPE REF TO cl_salv_wd_column,
                 lr_dropdown                  TYPE REF TO cl_salv_wd_uie_dropdown_by_key,
                 l_cmp_usage                TYPE REF TO if_wd_component_usage,
                 l_alv_model                   TYPE REF TO cl_salv_wd_config_table,
                 l_ref_interfacecontroller  TYPE REF TO iwci_salv_wd_table.
      l_cmp_usage = wd_this->wd_cpuse_doc_measure( ).
      IF l_cmp_usage->has_active_component( ) IS INITIAL.
        l_cmp_usage->create_component( ).
      ENDIF.
      l_ref_interfacecontroller = wd_this->wd_cpifc_doc_measure( ).
      l_alv_model = l_ref_interfacecontroller->get_model( ).
      l_alv_model = l_ref_interfacecontroller->get_model( ).
      l_alv_model->if_salv_wd_table_settings~set_read_only( abap_false ).
      lr_col = l_alv_model->if_salv_wd_column_settings~get_column(
        id = 'VALEUR_DIFF' ).
      CREATE OBJECT lr_dropdown
        EXPORTING
          selected_key_fieldname = 'VALEUR_DIFF '.
      lr_col->set_cell_editor( lr_dropdown ).
      DATA:
      lo_nd_ctx_tab TYPE REF TO if_wd_context_node,
      lo_ndinfo_ctx_tab TYPE REF TO if_wd_context_node_info,
      lt_value_set TYPE TABLE OF wdr_context_attr_value,
      ls_value_set TYPE wdr_context_attr_value.
      ls_value_set-value = '01'.
      ls_value_set-text = 'One'.
      APPEND ls_value_set TO lt_value_set.
      ls_value_set-value = '02'.
      ls_value_set-text = 'Two'.
      APPEND ls_value_set TO lt_value_set.
      lo_nd_ctx_tab = wd_context->get_child_node( 'DOC_MEASURE' ).
      lo_ndinfo_ctx_tab = lo_nd_ctx_tab->get_node_info( ).
      lo_ndinfo_ctx_tab->set_attribute_value_set(
        name = 'VALEUR_DIFF' value_set = lt_value_set ).
      DATA: lt_valueset TYPE TABLE OF wdr_context_attr_value,
                ls_valueset TYPE wdr_context_attr_value,
                lr_node TYPE REF TO if_wd_context_node,
                lr_nodeinfo TYPE REF TO if_wd_context_node_info.
      lr_node = wd_context->get_child_node( 'DOC_MEASURE' ).
      lr_nodeinfo = lr_node->get_node_info( ).
      lr_nodeinfo->set_attribute_value_set(
      EXPORTING
        name = 'VALEUR_DIFF'
        value_set = lt_valueset
    Thanks.
    Matías.

    Hi,
    In your code, you are trying to do set_attribute_value_set twice. If you read your code carefully, you are setting the values once using lt_value_set where you have correctly filled the values. But after this, you are again trying using lt_valueset without filling any values. This is why your previous value-list gets overwritten and you see nothing in the dropdown. Remove the following lines in your code and it will work fine.
    DATA: lt_valueset TYPE TABLE OF wdr_context_attr_value,
    ls_valueset TYPE wdr_context_attr_value,
    lr_node TYPE REF TO if_wd_context_node,
    lr_nodeinfo TYPE REF TO if_wd_context_node_info.
    lr_node = wd_context->get_child_node( 'DOC_MEASURE' ).
    lr_nodeinfo = lr_node->get_node_info( ).
    lr_nodeinfo->set_attribute_value_set(
    EXPORTING
    name = 'VALEUR_DIFF'
    value_set = lt_valueset
    Please get back if you are facing any more issues.
    Regards,
    Nithya

  • Unable to find data in RSA3 for particular fields2lis_04_p_arbpl datasource

    I am working with datasource 2lis_04_p_arbpl to construct Yield Report. I have a field GAMNG(Target Quantity) in the table AFKO, so I added it to the communication structure and activated it. I also want the field IGMNG(confirmed quantity) which is available in the table AFKO but not appearing in the pool tables of ARBPL datasource, so I have done datasource enhancement and obtained the field in the datasource. When I am checking for the data in RSA3, unable to find data(zero values) for both the fields.
    Edited by: bhagav on Jan 5, 2012 1:20 PM

    Hi ,
    Please make sure that you are doing the extractor check in Update mode 'Full' .If the setup tables are filled then this should pick the data for the 2 newly added fields .
    check and update accordingly later .
    Thanks
    Kamal Mehta

  • Powerpivot for sharepoint error: Unable to refresh data for a data connection in the workbook

    Hello,
     I have three errors when i try to use a simple powerpivot workbook published in sharepoint: (nothing on google has help me..)
    1-Unable to refresh data for a data connection in the workbook.
    Try again or contact your system administrator. The following connections failed to refresh:
    PowerPivot Data
    2-The embedded PowerPivot data in the workbook cannot be loaded due to a version mismatch
    3-01/21/2012 17:26:47.08  w3wp.exe (0x1950)                        0x0AD0 Excel Services Application     Excel
    Calculation Services     bccc Medium   Session.HandleTrimmedWorkbookReloading: userOperation ApplySlicerSelectionOperation requires BaseWorkbook: "http://crm2011:2020/Marketing%20Reports/test2_excel32bits.xlsx"
    [0x409] [Saturday, 21 January 2012 09:40:18] [BaseWB ID: 2] to be untrimmed if it is currently trimmed. The workbook is currently NOT trimmed. fb614a65-e398-4b97-a98d-fb7b23eab39f
    01/21/2012 17:26:47.08  w3wp.exe (0x1950)                        0x0AD0 Excel Services Application     Excel Calculation
    Services     f1va Medium   CWorkbookWrapper::CWorkbookWrapper: Created with ID=4 fb614a65-e398-4b97-a98d-fb7b23eab39f
    01/21/2012 17:26:47.09  w3wp.exe (0x1950)                        0x0AD0 Excel Services Application     Excel Calculation
    Services     eq3r Medium   ConnectionRequest.ConnectionRequest: New connection request. SessionId=1.V21.4PI+fCwIq52LH++nOoMzs90.5.en-US5.en-US73.-0060#0000-10-00-05T03:00:00:0000#+0000#0000-03-00-05T02:00:00:0000#-006036.bfceb31b-7122-46ca-9e2a-ae52cefcfcaf1.N,
    WorkbookVersion=ConnectionInfo.WorkbookVersion: Uri=http://crm2011:2020/Marketing Reports/test2_excel32bits.xlsx, Version=Saturday, 21 January 2012 09:40:18 fb614a65-e398-4b97-a98d-fb7b23eab39f
    01/21/2012 17:26:47.12  w3wp.exe (0x1950)                        0x0AD0 Excel Services Application     Excel Calculation
    Services     aysl Medium   Succeeded to initialize a chart. fb614a65-e398-4b97-a98d-fb7b23eab39f
    01/21/2012 17:26:47.12  w3wp.exe (0x1950)                        0x0AD0 Excel Services Application     Excel Calculation
    Services     8xk9 Medium   ExternalSource.ExecuteOperation: We exhausted all available connection information. Exception: Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInfoException: Exception of type
    'Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInfoException' was thrown.     at Microsoft.Office.Excel.Server.CalculationServer.ConnectionInfoManager.GetConnectionInfo(Request request, String externalSourceName, Int32
    externalSourceIndex, Boolean& shouldReportFailure)     at Microsoft.Office.Excel.Server.CalculationServer.ExternalSource.ExecuteOperation(Request request, ExternalSourceStateInfo externalSourceStateInfo, ExternalSourceStateInfo prevExternalSourceStateInfo,
    Int32 index, ConnectionInfoManager connectionInfoManager, ExternalDataScenario scenario, DataOperation dataOpe... fb614a65-e398-4b97-a98d-fb7b23eab39f
    01/21/2012 17:26:47.12* w3wp.exe (0x1950)                        0x0AD0 Excel Services Application     Excel Calculation
    Services     8xk9 Medium   ...ration, Boolean verifyPreOperationConnection), Data Connection Name: PowerPivot Data, SessionId: 1.V21.4PI+fCwIq52LH++nOoMzs90.5.en-US5.en-US73.-0060#0000-10-00-05T03:00:00:0000#+0000#0000-03-00-05T02:00:00:0000#-006036.bfceb31b-7122-46ca-9e2a-ae52cefcfcaf1.N,
    UserId: 0#.w|contoso\manager fb614a65-e398-4b97-a98d-fb7b23eab39f
    My server and client olap versions are the same: MSOLAP.5, i used sql server 2008 R2 SP1 and sharepoint 2010 SP1 and reboot or iisreset have no effect
    Thanks in advance for your help

    Hello Challen Fu
    I would be so grateful if you could please help me out
    I have been trying to find a solution to the same error message
    In my case, the power pivot reports were working before on a regular team  site , but then two things changed:
    a)  I  created a toplevel site using the BI Center template. Now I am using a Business Intelligence template , created a power pivot gallery library and uploaded a few powerpivot reports
    b)  On the  backend, the database instance was upgrated to SQL Server 2012 
         Front end Server VDSP01  remains  SQL Server 2008 R 2 where Sharepoint 2010  was installed as a FARM  
    Now, the reports will display in sharepoing however they will not refresh. the error message i get is the same.
     Scenario recap:
    a- Server VDSP01  uses SQL Server 2008 R 2 where Sharepoint 2010  was installed as a FARM
    b- On the back end,  the database instance name was replaced with SQL 2012 Server:
               from SQL Server 2008 R 2 (instance DBDEV-COTS\COTS)
               to     SQL Server 2012 ( instance VTSQL01\COTS)
    c-  I was told that:
         From VDSP01, they ran
    CliConfg.exe   to create SQL Server Alias :
           where    BEFORE: vdsharepoint -->  DBDEV-COTS\COTS
                and  AFTER    : vdsharepoint -->  VTSQL01\COTS
     I appreciate in advance any help you can provide<v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75" path="m@4@5l@4@11@9@11@9@5xe" stroked="f">
      <v:stroke joinstyle="miter">
      <v:formulas>  <v:f eqn="if lineDrawn pixelLineWidth 0">
      <v:f eqn="sum @0 1 0">
      <v:f eqn="sum 0 0 @1">
      <v:f eqn="prod @2 1 2">
      <v:f eqn="prod @3 21600 pixelWidth">
      <v:f eqn="prod @3 21600 pixelHeight">
      <v:f eqn="sum @0 0 1">
      <v:f eqn="prod @6 1 2">
      <v:f eqn="prod @7 21600 pixelWidth">
      <v:f eqn="sum @8 21600 0">
      <v:f eqn="prod @7 21600 pixelHeight">
     <v:f eqn="sum @10 21600 0">
    </v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:formulas>
     <v:path gradientshapeok="t" o:connecttype="rect" o:extrusionok="f">
    <o:lock aspectratio="t" v:ext="edit">
    </o:lock></v:path></v:stroke></v:shapetype> <v:shape alt="" id="Picture_x0020_2" o:spid="_x0000_i1025" style="width:630pt;height:475.5pt;" type="#_x0000_t75">
    <v:imagedata o:href="cid:[email protected]" src="file:///C:\Users\wlarange\AppData\Local\Temp\msohtmlclip1\01\clip_image001.jpg">
    </v:imagedata></v:shape>
    wanda larangeira

  • How to download interactive adobe form with filled data

    Hi Experts,
    i have created a module pool program that is showing interactive adobe form, i created a button 'SAVE' to download the interactive adobe form to the presentation server.
    but the problem is that i am unable to save the interactive adobe form with filled data. Please provide me the code how to download interactive adobe form with filled data.
    Please provide me valuable information to clear the issue.
    Thank you,
    B. Raghu Prasad.

    Hi Raghu,
    is this adobe form in web dynpro ? if so, I suggest to go to [Web Dynpro |Web Dynpro ABAP; forum to get more advice because it seems to be more specific topic.
    Regards,
    Vincent

  • Adobe Reader unable to fill in Secured Fillable Adobe Forms on ipad

    I am unable to fill in my Adobe Fillable Secure Form using Adobe Reader. Help!    

    Currently, the Adobe Reader mobile products (Reader for iOS, Android) do not allow users to make changes (including filling in form fields) to secure/protected PDF documents (whose contents are encrypted).  Because saving encrypted data has not been supported yet.
    Please use the desktop version of Adobe Reader on a Windows or Mac computer to fill in the secured fillable forms, instead.  Sorry for the inconvenience.

  • Unable to extract data from R/3 into BW 3.5

    I have just started learning BW. I am currently trying to upload data from R/3 into BW. I have tried uploading data into InfoCube , ODS, InfoObjects from R/3 and in all cases I am getting error messages. Please shed some light as the what am doing wrong......below are the steps that I have done
    For loading transaction data from R/3 in ODS
    1. Created view from VBAP and VBAK tables in R/3
    2. Created Transaction type DataSource in R/3 using RSO2 transaction
    3. Replicated above DataSource in BW under Source Systems. using 'Replicate DataSource'
    4. Created ODS object along the same lines as the above created view in R/3
    5.Created InfoSource and assigned the replicated DataSource
    6. Activated the Transfer Rules, Transfer Structure, Communivcation Structure
    7. Created Update Rules for ODS and activated them
    8. Created InfoPackage and started the Data Request
    The error message that I see in Monitor is as below
    Requests (messages): Everything OK
             Data request arranged
             Confirmed with: OK
    Extraction (messages): Missing messages
             Missing message: Request received
             Missing message: Number of sent records
             Missing message: Selection completed
    Transfer (IDocs and TRFC): Errors occurred
             Request IDoc : IDoc with errors added
    Processing (data packet): No data
    I am getting the same error message when I try InfoCube instead of ODS.
    Please let me know what is wrong
    Vidya

    I checked the 'Details' and 'Status' tab page in Monitor
    On Status Page it says
    Request still running
    Diagnosis
    No errors could be found. The current process has probably not finished yet.
    System response
    The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
    and/or
    the maximum wait time for this request has not yet run out
    and/or
    the batch job in the source system has not yet ended.
    Current status
    No Idocs arrived from the source system.
    On Details Tab page, it says
    Requests (messages): Everything OK
    Data request arranged
    Confirmed with: OK
    Extraction (messages): Missing messages
    Missing message: Request received
    Missing message: Number of sent records
    Missing message: Selection completed
    Transfer (IDocs and TRFC): Errors occurred
    Request IDoc : IDoc with errors added
    Processing (data packet): No data

  • Unable to display data in BI publisher Report

    Hi,
    We are developing BI publisher reports in siebel 8.1.1.
    We are able to preview data perfectly with the rtf which we developed and by loading sample data file generated based on integration object.
    we uploaded the template file into the application associated with the integration object and generated xliff and tagged it to a view.
    When we navigated to that view and trying to run the report. the report is generating but unable to view data in that report .
    on checking siebel log we found the below error....
    ObjMgrLog     Error     1     000000024b97169c:0     2010-03-10 20:24:01     (bcfile.cpp (5808)) SBL-SVC-00185: Error occurred while deleting file 'Error occurred while deleting file 'C:\Siebel81\Client\Local\files\S_XMLP_REPOUTPT_17XF-3PM_.SAF'.'.
    did anyone of you faced this kind of issue....?
    Please help .
    Maneesh

    Thanks for you reply,
    Our scenario is this report is basically a dissconnected mode report... we are developing these reports for mobile clients.
    We dint face this kind of issue while developing other reports.
    So please let us know if you have any idea on why we are facing this issue.
    Regards,
    Maneesh

  • OraRRP Error with "Unable to copy data file;Error code 2, check disk space"

    Hi,
    Some users get this message -"Unable to copy data file;Error code 2, check disk space" when run report with orarrp, but most users do not get it.
    I check free space at both server and client side, they are very sufficient.
    I also checked directory exists for REPORTXX_TMP variable.
    My user call reports via URL (rwservlet) and it occur for all reports.
    How I can solve this problem?
    Thanks in advance.
    Tawatchai R.

    Hi,
    have the same problem now. One user has temporarily problems to download .rrpa files via URL (rwservlet) request. Error code: -"Unable to copy data file;Error code 2, check disk space". Did you get a solution??
    Thanks in advance. Axel

  • Unable to Load data in Planning

    Hi,
    I am receiving this error when ever i am trying to load data.
    Launch error message:
    "An error occurred while running the specified calc script. Check the log for details."
    and some times
    "You will be unable to update data when essbase in archive mode"
    But i have checked the essbase, no "Back up process" is running.
    Can Anyone advice me what's the issue..i am restarting the server everytime to fix the issue but not sure how i need to rectify it with out restarting the server.
    Regards
    Saravanakumar.Vijay

    I take it you are running a script that loads data and then executes a rule/calc
    "An error occurred while running the specified calc script. Check the log for details."
    This refers to a calc/rule that has been run
    "You will be unable to update data when essbase in archive mode"
    This means that the database is still in archive mode, you can use Maxl to take it out of archive mode.
    e.g. Alter database app.db end archive;
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Unable to save data in record working time

    Hi All,
    I am working on ESS portal , when I try to record & save working time in portal , it throw an error message as 'Unable to save data'.
    Can you plz assist me on this.
    Usefull answers will be awarded.
    Thanks,
    Nilima

    Hi ALL,
    I'm too facing the same problem....usefull answers will be awarded.

Maybe you are looking for