Unable to find 0CB_WT_TEXT Datasource in R/3 source system.

Hi Experts,
I am unable to find 0CB_WT_TEXT(Workbook / Template Text) Data source in RSA5 and RSA6.
i need to pull the data into 0CB_WT infoobject.
Its very urgent, please help me to find the datasource in R/3.
Regards,
Raj

Hi,
Just place the cursor on SAP folder and press the + button.
Then once done try to search the datasource as mentioned above.If it is still not available check in BW system as well and not in R/3..It is shown as BI content as
DataSource Type
Texts (Master Data)
Application Components
0BCT_CB_IO
Available as from OLTP Release
BI Content 3.5.2 Add-On
Delivery with
BI Content 3.5.2 Add-On
Thanks and regards
Kiran

Similar Messages

  • Unable to find a web browser installed on your system

    I've used Robohelp previously, but not for some time, now I'm
    getting "Unable to find a web browser installed on your system"
    error when trying to generate a layout? How do I restablish my
    browser? Thanks!

    Hi jakirche
    I believe it's as simple as opening Windows Explorer,
    locating a file with a .HTM extension, right-clicking the file and
    choosing to associate it with Internet Explorer.
    Cheers... Rick

  • Unable to find migrated datasource in RSOSFIELDMAP

    Hi All,
    I had migrated the datasource 0RPM_PORT_BUCK_HIERARCHY to BW side but unable to find it in RSOSFIELDMAP.

    Hi Raman,
    ***Remove logsys and keep it as blank.
    OLTPSOURCE  -0RPM_PORT* and display the table data.***
    able to find only these.
    ***Can you share RSA1-->data source tree of your data source.***

  • Unable to find the Datasource

    Hi Gurus,
    I'm working on HR module. In BI there is an infoobject 0AGE which can have only Hierarchy Master Data, but when I want to extract data for the respective Master Data from ECC 6.0, I couldn't locate the Datasource for that. Can you guyz help me with what could be the problem that I'm not able to find the Datasource for 0AGE.
       (Note:- All the available Datasources for BI were successfully transfered in RSA5 and activated(RSA6) ).
    Waiting for Optimistic reply.
    Thanks & Regards,
    Syed Ali

    Hello,
    InfoSource : Age in Years (Characteristic)
    Technical name: 0AGE
    Use
    This InfoSource yields information on employeesu2019 age in years.
    A hierarchy is defined for the characteristic 0AGE. You can define this hierarchy manually yourself or by using a CSV file.
    You can define your own hierarchies (manually). You can determine intervals within the structure as required, for example, in five-year intervals (25 - 29 years, 30 - 34 years, etc.) Therefore, the age structure that you define yourself offers advantages over the fixed age structure of the Age Range characteristic (0AGE_RANGE).
    For example, you can use the hierarchy to display the age structure of your enterprise as follows:
    < 20 x < 20
    20 - 24 20 £ x £ 24
    25 - 29 25 £ x £ 29
    30 - 34 30 £ x £ 34
    35 - 39 35 £ x £ 39
    You can also upload the hierarchy using the CSV file delivered by SAP. To do so, proceed as follows:
    In the Administrator Workbench, choose the Source system tab page.
    Right click the top Source systems node and choose Create source system.
    In the Select Source System Type dialog box, select File system, manual metadata, data using file interface.
    In the Create Source System dialog box, enter AGE_File in the Source system field, and Age in Years in the Name of source system field. Confirm your entries.
    Choose the InfoSources tab page.
    Right click the higher Master data in Personnel Administration node and choose Create InfoSource.
    In the Create InfoSource: Select Type dialog box, select Master data / texts / hierarchies. Confirm your entry.
    In the Create InfoSource (Master Data) dialog box, enter 0AGE in the InfoObject field. Confirm your entry.
    Right click the lower Age in Years node and to choose Assign source system.
    In the Master Data InfoSource: Assign Source System dialog box, enter AGE_File in the Source system field. Confirm your entry.
    On the Maintain Metadata screen, choose Create hier. (create hierarchy).
    In the Create Hierarchy - Name dialog box, enter AGE in the Hierarchy name field, Age in Years (Hierarchy) in the Long description field, and an X in the Sorted hierarchy and Interval fields. Confirm your entries.
    Choose Save hier. (save hierarchy), followed by Save and Close.
    Right click the lower Age in Years (Hierarchy) node and choose Create InfoPackage.
    In the Create InfoPackage dialog box, enter a description as required in the Long description field. Confirm your entry.
    On the Scheduler (Maintain InfoPackage) screen, choose the External data tab page.
    In the Load external data from group box, select Application server. In the File type (if control file is switched off) group box, select CSV file.
    In the File name field, enter AGE_D.CSV for German node texts and AGE_E.CSV for English node texts. Save your entries.
    Thanks
    Chandran

  • Unable  to kill or cancel the job in source system

    Hi gurus,
       got a error , while loading delta for line item ods in AR.
      stating as the job is not ended in the source system.'
      i find the job in the source system and it is active.
       i tried to kill that job from sm37, its not happening,
    and tried to cancel from sm50 even its not happening.
    kindly suggest how to cancel or kill that job.
    its urgent plz.
    pramod

    Hi,
            Check If u r system is running on more than 1 server...kill your job with proper appropriate server in tcode SM51.And also after killing the job come to SM37 check that particular job, nd on top menubar,u will 'check job status'.Then do refresh.
    Hope this helpful to you.
    Regards,
    Praveena.

  • Change a migrated DataSource for DB Connect Source System

    Hi,
    I have created a DataSource for a DB connect Source system with transactioncode RSDBC as follows:
    1. select database TableView
    2. choose Edit DataSource
    3. fill in the field Application Component (default stated NODESNOTCONNECTED)
    4. generate datasource
    Result: the datasource has been created in the right application component. As I want to migrate to BW 7 I have migrated the datasource (with export) and afterwards activated it. Now we need to add more fields to the database TableView. After the fields have been added I want to make these fields also available in the DataSource created before.
    How can I do this ?
    When using transaction code RSDBC I found out that the application component is stated again NODESNOTCONNECTED instead of the application component filled before. Is it possible that changes in the TableView will always lead to create the DataSource all over again (new InfoPackage, new Transformation rules, new DTP).
    Thank you in advance for your help. Kind regards, Minouschka

    Hello,
    We have basically the same problem. An existing data source from a DB-connect client and now need to add a new field but edit mode BW does not provide the ability to add or delete existing fields.
    Were you able to complete this and if so how did you do it?
    Thank you,
    Rick

  • Datasource Creation for Informatica Source system in NW2004s

    Hi,
    We are upgrading BW 3.5 to SAP NW2004s. In NW2004s Create datasource
    is new feature provided in BW 7.0.
    I tried to create this datasource for Flat file and worked fine. We
    are also using Informatica as source system (External System).
    Whenever I tried to create datasource for External system such as
    Informatica, it gives message
    "Datasource ZTEST(INFPCPD):Object Type RSDS not supported in BAPI
    Source System"
    Is it a bug? or Creation of datasource is not supported incase of
    Informatica or external system?
    Thanks
    Rupesh

    Hi Rupesh,
    The latest BI release in SAP NetWeaver 7.0 (2004s) includes a new type of DataSource for which staging BAPI has not yet been aligned.
    Third party ETL tool vendors can therefore only implement their load processes using the original type of DataSource from BW 3.x. This DataSource is still provided in the new release without any changes. Upgrading to NetWeaver 7.0 (2004s) BI (BI 7.0) does not therefore endanger existing implementations based on BW 3.x and NetWeaver 2004 (BW 3.5).
    It is also possible to migrate third party ETL implementations based on BW 3.x into the new data-flow concept of a NetWeaver 7.0 (2004s) BI environment using new DataSources, transformations (also new), and data transfer processes (DTP) (also new). This is possible because the system provides an emulated view for BW 3.x DataSources, which makes it possible to combine them with NetWeaver 7.0 (2004s) transformations and DTPs for regular batch load processing (this does not include direct access and real-time data acquisition (RDA)).
    This allows the benefits of the new data loading concept to be made available in such third party ETL-based loading scenarios.
    Regards,
    Anil

  • Problem in activating datasource after replication from source system

    Hi Experts,
    After replication of data sources from source system ,I get all data sources inactive. I tried to make it active manually but every time I get
    Syntax error in GP_ERR_RSAPTD1, row 27 (-> long text)
        Message no. RG102
    Diagnosis
        Field "/BIC/CCZVBAK2031" is unknown. It is neither in one of the
        specified tables nor defi...
    How do I go about solving this problem....Any advise please...

    Hello,
    You do not mention your source system release but can you execute the check report
    described in the SAP note 493422 , if this does not resolve the problem can you goto
    RSA1, right click on the relevant "source system" and choose the "restore" option,
    then please try and replicate and activate the datasource again.
    If you  have BW release 7.0 please check that the note 929751is applied in your system
    or that you are on a higher support package level.
    If there is still a problem please le me know your BW Release and Support package level.
    Best Regards,
    Des

  • How to find the UWL work item types source system?

    Hi Gurus,
    How to find the Universal Work List work item types source system?
    Thanks in Advance,
    Dharani

    Hi Dharani,
    You can achieve this by personalizing the view for UWL.
    Click on right side context menu of iView, click on personalize view
    Here you will get list of Available Attributes not Displayed select System ID in that.
    Save your settings and now you can see the task is from which system.
    This will solve your problem.
    Regards
    Kedar Kulkarni
    Reward points if useful

  • I need version 3.6.16 for an at home online job. I am unable to find it anywhere from a secure source. Is there a way to get a link to download it? The ChaCha Toolbar only works with this older version. Thanks!

    I need the older version 3.6.16 for my at home based job for ChaCha. Their toolbar only works with this version and they say it is more compatible with this. And I have not been able to find a secure link to download this older version. Can you give me a secure link or is it possible to download this older version securely?

    If you only need Firefox 3.6 for just one thing then you may be better off using a portable version of Firefox as it will not impact your Firefox 6.0.2 install. You can install it on hard disk or on a usb flash drive. Firefox 3.6.22 is the current security update as 3.6.16 is old.
    http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

  • How to recover a datasource from source system

    Dear Experts,
    i am trying to find a datasource(0PS_PRJTYPE_ATTR) in the source system. For some reason, I could only find the text one, not the attribute one. I checked in RSA5, RSA6 and RSA2. I couldn't find it.
    What are the possible ways to recover the datasource, not sure if someone has deleted it.
    Its really urgent, Please guide me.
    Regards
    Shanthi

    Hi,
    The same should be available in the source system (DEV), Surprising how / why the same is available in BW system.
    I checked the SAP ERP source system to which I have an access and the same is not available in the source system not in the BW system
    My sugession is to go for a generic datasource after identifying the table with the help of functional consultant.
    Regards
    Venkata Devaraj

  • Unable to find Transfer Rules and Data Source for 0PERSON Info Source

    Hi,
    I'am working on SALES ANALYSIS Configuration with the help of SAP Best Practices.
    I'am trying to load Master Data Attributes/Texts/Hierarchies.
    I'am able to load for allmost all the InfoPackages which i created for particular DataSource.
    Now i need to load master data for 0PERSON InfoObject under that Person (Attributes) and Person (texts) are there,for this 2 Transfer Rules and the DataSource has to be defined by default as it is defined for other Attributes/Texts/Hierarchies.But i'am unable to find a DataSource and Transfer Rules to create a infopackage for PERSON Attributes and Texts.
    Please gudie me with a solution in order to get these Transfer Rules and DataSource for this Attributes and Texts.
    With regards,
    Pradeep.B

    Hi,
    Install the corresponding master data objects from Business content. Go to data source find out the needed datasource, replicate it. If you want you can migrate it also.
    If still you are not getting 0person masterdata object datasource & transformation structure, then you have to create the transformation, Infopackage.
    Hope if you will install the business content again, it will solve your problem.

  • Can't find My datasource in QA from Dev

    Hello Gurus,
    I have transported generic datasource from Dev to QA, when i check in source systems(After replicating in RSA1 in QA), still i Cant find it!
    when I assign Source systems(for datasource) at infosource in QA, Iam able to find my Datasource, but nothing in Transfer Structure?
    Pls find me a solutions for this!
    Thanks in Advance,(will be Appriciated with points!)
    JK

    dear VKN,
    sorry ot keep u on hold, it was internet problem at my side.
    part 1.
    Dear VKN,
    U can't modify the released request.
    U can transport the same object by attaching to the new modifiable request (Once u create a new request, it is modifiable. only after releasing it becomes a released request and no more available under modifiabe request in the request tree), please follow my suggestions in this same thread.
    Be bold and confident !
    Good luck.
    Part 2.
    i hope u have assigned a new request for activation of the Datasource, look for it in SE10 Or SE09 under modifiable requests (i hope u have not yet released the request).
    Hope this resolves ur problem totally.
    Now moving out of office, see u tommorrow.

  • LCM issue after 11.1.2.2 was installed; Unable to find artifact folder -

    Hi there,
    I was able to migrate artifacts from 931.x to 11.1.2.1 succesfully. (this was a production9 tot test11 system)
    Now I have installed a 11.1.2.2 environment and things start to differ.
    Migration is not workring as expected.
    The import to 11.1.2.2 complain with several lines:
    Warning in migrating artifact, "/Repository Objects/".
    EPMLCM-37038: Cannot perform migration. Unable to find artifact folder - REPORTMART in the source application.
    it does so for every selected folder to import.
    It seems to me that the 11 import technically expacts the real folder names while 11.1.2.1 and before was able to import the structure/ foldernames like 0000012a and 000 and 00000.
    Has anyone come across this an knows how to tackle it?
    Your help would be very much welcome.

    Hi Jasmine,
    thanks for your response.
    I know the answer your giving is the theoretical answer oracle support would give me. On the other hand I used this tool succesfully to migrate/ copy IR artifacts from 931 to 11.1.2.1. So I am almost convinced it is possible to use for 11.1.2.2 too.
    It looks like Orace likes to keep the real background knowledge of these utilities for it self. There is very very little information on the tool in the manuals. Which I am ure of I read them all. When a little part of the alcm changes the general public has to find solutions our self. Thats why I asked the forumpopulation to help me with it.
    Detlev

  • Message "Creation of DataSources for SAP source system is not permitted"

    Hi,
    I am in DW Workbench: Modeling and I need to copy a DataSource.
    It's impossible, beacause I have this Message "Creation of DataSources for SAP source system is not permitted"!
    What can I do?
    Thks

    Hii.
    You can not copy the standard datasource to any other source system it will not allow you to do that.
    But if you want to copy you can copy it to PC FILE source system.
    It will allow you to copy there.
    Right click in Datasource->Copy-> Give Target datasource name -
    > intarget Source system tab -
    >Give Source system for File.
    Thanks
    Mayank
    Edited by: Mayank Chauhan on Sep 4, 2009 5:41 PM

Maybe you are looking for