Unable to find a Routing corresponding to the incoming request message.

I have faced some issues regarding integration between peoplesoft 9 [peopletools 8.48] and Oracle Fusion Middleware using BPEL.
the error log shows the error
Exception : PeopleSoftServiceListeningConnector: GeneralFrameworkException
Default Message : Unable to find a Routing corresponding to the incoming request message.
stack trace : com.peoplesoft.pt.integrationgateway.common.GeneralFrameworkException
     at com.peoplesoft.pt.integrationgateway.listeningconnector.PeopleSoftServiceListeningConnector.service
Please help me out in this issue.
I have searched forums and Some of them told that if external service operation and message name are not matching then this kind of error occurs.i have changed the alias name in routings>parameter page to my message name. But still it is not working.
Thanks and advance,
Nirav

Thanks.
I hv used the userid PS in the node definition page of the anonymous node. Because previously I was getting the error that "Username is not defined in the database."
What you mean is
1) Should I removed the userid PS from the node definition page of the anonymous node ?
2) The external Alias name in the routing parameter page is the same as the component interface and version v1 is added there as a suffix. I hv changed the external Alias name to my request and response message name. Am i doing right ? If I'm doing wrong then what should be the external alias name.
Thanks,
Nirav

Similar Messages

  • Sun Studio (12,1) is unable to find a supported version of the Netbeans IDE

    Hi all,
    We're working on upgrading both the hardware and software on our application currently, and part of this involves upgrading our compiler to Sun Studio 12.1. I downloaded
    SunStudio12u1-SunOS-SPARC-pkgs-ML.tar.bz2
    from the Sun website and we installed it into the following location on our server:
    /opt/compiler/sunstudio12.1
    I successfully compiled all my code using the compiler, however, when I try to launch the debugger by typing ./sunstudio in the 'bin' directory, I get the following error:
    {opt/compiler/sunstudio12.1/bin}./sunstudio
    Sun Studio is unable to find a supported version of the NetBeans IDE.
    Sun Studio requires a NetBeans IDE version 6.5.1 with NetBeans C/C++ module (cnd
    2) enabled.
    Sun Studio looks for a valid NetBeans IDE installation in the following order:
    1) Location specified with --netbeanshome command line option
    2) At /opt/compiler/sunstudio12.1/netbeans
    I have seen references to executing 'prepare_system' on forums while I was trying to investigate this, but when our sys admin folks try to execute the command, it does not work (command not found). They've mentioned that they expected a prepare_system script in the directory where we untarred the downloaded sun studio tarfile, but it is not there:
    drwxrwxr-x 4 59001 staff 1024 Aug 20 2009 .
    drwxr-xr-x 3 yu12 lifecad 1024 Jul 2 09:48 ..
    drwxrwxr-x 4 59001 staff 1024 Aug 17 2009 LEGAL
    -rw-rw-r-- 1 59001 staff 3985 Aug 19 2009 SS12u1_README-pkgs.txt
    -rw-r--r-- 1 59001 staff 5598 Aug 20 2009 SS12u1_README-pkgs_ja.html
    -rw-r--r-- 1 59001 staff 4155 Aug 20 2009 SS12u1_README-pkgs_zh.html
    -rwxrwxr-x 1 59001 staff 517979136 Aug 6 2009 SunStudio12u1-SunOS-SPARC-pkgs.sh
    -rwxrwxr-x 1 59001 staff 11814 Aug 6 2009 install_patches.sh
    drwxrwxr-x 5 59001 staff 96 Aug 17 2009 patches
    I can see a netbeans directory was created as part of the install, but I'm not sure why sun studio thinks netbeans is not available (afraid my knowledge about netbeans is practically non existent):
    {opt/compiler/sunstudio12.1/netbeans}ls -l
    total 6062
    drwxr-x--- 2 root root 512 Apr 5 11:14 bin
    drwxr-x--- 7 root root 512 Apr 5 11:14 cnd2
    -rw-rw-r-- 1 root root 5254 Mar 5 2009 CREDITS_ja.html
    -rw-rw-r-- 1 root root 5175 Mar 5 2009 CREDITS_pt_BR.html
    -rw-rw-r-- 1 root root 4908 Mar 5 2009 CREDITS_zh_CN.html
    -rw-rw-r-- 1 root root 5434 Mar 5 2009 CREDITS.html
    -rw-rw-r-- 1 root root 1717 Mar 5 2009 DISTRIBUTION.txt
    -rw-rw-r-- 1 root root 0 Aug 6 2009 dummy
    drwxr-x--- 2 root root 512 Apr 5 11:14 etc
    drwxr-x--- 7 root root 512 Apr 5 11:14 gsf1
    drwxr-x--- 6 root root 512 Apr 5 11:14 ide10
    -rw-rw-r-- 1 root root 1845 Mar 5 2009 LEGALNOTICE.txt
    -rw-rw-r-- 1 root root 64275 Mar 5 2009 LICENSE.txt
    -rw-rw-r-- 1 root root 37141 Mar 5 2009 moduleCluster.properties
    drwxr-x--- 7 root root 512 Apr 5 11:14 nb6.5
    -rw-rw-r-- 1 root root 15822 Mar 5 2009 netbeans.css
    drwxr-x--- 8 root root 512 Apr 5 11:14 platform9
    -rw-rw-r-- 1 root root 6141 Mar 5 2009 README_ja.html
    -rw-rw-r-- 1 root root 5692 Mar 5 2009 README_pt_BR.html
    -rw-rw-r-- 1 root root 5122 Mar 5 2009 README_zh_CN.html
    -rw-rw-r-- 1 root root 5155 Mar 5 2009 README.html
    -rw-rw-r-- 1 root root 2913280 Mar 5 2009 THIRDPARTYLICENSE.txt
    drwxr-x--- 5 root root 512 Apr 5 11:14 websvccommon1
    Our server details are:
    {opt/compiler}uname -a
    SunOS a03714 5.10 Generic_142900-03 sun4v sparc SUNW,T5440
    Any advice appreciated on how to get the debugger working. Ideally, I'd prefer not to uninstall / reinstall if at all possible as we're about to start system testing our executables, and I think a reinstall would require more unit teting and delays to our project (yikes!). But any input would be appreciated here.
    Thanks,
    Brendan.

    Hi David,
    First off - thanks for the response. I do have some follow up questions if you don't mind though:
    1. When you say the install is corrupted, do you suspect
    - the file I downloaded from the website either was corrupted, or was not the correct file for my platform
    - the procedure used to install the software was incorrect
    - something else
    2. Is there a logfile that the sun studio install creates which would indicate an error during the installation procedure? I'm sure our admins who performed the install would have shouted if an error was logged... but on the offchance that the installation does not 'shout loudly' for some errors, I'd like to see a log of the error. At a minimum, I'd expect it to say why the install failed, and what we need to modify to ensure a successful install next time 'round.
    3. I successfully compiled my code using the C compiler from the install. My unit tests also look good... does this suggest that the install was at least a partial success, and would you suspect that my recompiled executables are reliable, despite the fact that I cannot launch the IDE?
    4. Today, one of our admins telnetted to our unix server - not via exceed by the way, but he did try the following test:
    - set his display env variable (he knew he would not get a display however)
    - executed the sunstudio script
    He did not get the netbeans error, and the process appeared to be running (as I mentioned, without a display) until he killed it. I've asked if they can repeat the test using an exceed session. I thought there may be something on his $PATH that I did not have - unfortunately this was not the case (although, he may have access as 'root' to something that I require to launch the IDE). My question is, would you expect this behaviour if the install was corrupted?
    Let me know what you think.
    Thanks,
    Brendan.

  • Sun Studio is unable to find a supported version of the NetBeans IDE at the

    I'm following the system install instructions in the Grid Compute Utility guide, Appendix A "Building a Local Development Environment" and am getting stuck on step 4, installing sunstudio. I'm running Solaris 5.10 on x86 and can run netbeans IDE without problem. Here is some info, I'm not sure what other system info is relevant:
    bash-3.00# which netbeans
    /opt/netbeans-5.5.1/bin/netbeans
    bash-3.00# which sunstudio
    /usr/bin/sunstudio
    bash-3.00# sunstudio
    Validating NetBeans IDE at: "/opt/SUNWspro/../netbeans-5.5.1"
    Sun Studio is unable to find a supported version of the NetBeans IDE at the specified location.
    Sun Studio requires a NetBeans IDE version 5.5.1 with NetBeans C/C++ Development Pack version 5.5.1
    installed. Sun Studio looks for a valid NetBeans IDE installation in the following order:
    1) Location specified with --netbeanshome command line option
    2) At /opt/netbeans-5.5.1 location, if exists
    3) At /opt/SUNWspro/../netbeans-5.5.1 location, if exists
    4) At /opt/SUNWspro/../../netbeans-5.5.1 location, if exists
    Please run the System Preparation Tool (prepare_system), if available, to set up your environment.
    Any help!?

    Did you install NetBeans separately or let Sun Studio installer do it? The latter usually results in working configuration.
    I think that NetBeans installation simply doesn't have c++ pack; you can install one following usual NetBeans modules installation path and then re-try starting Sun Studio.
    Another option is to uninstall NetBeans and re-install Sun Studio using its installer, which should set up NetBeans properly.

  • Unable to find a qualifications catalog for the root object specified-ESS

    Hi SDN,
    We are getting following exception Unable to find a qualifications catalog for the root object specified   when click on Add New Skill in Skills Profile, ESS . It is working fine , if user is assigned sap_all role. This is issue with permissions. Which role need to be assigned to work with Skills Profile in r3. Please help me out.
    regards,
    Sree.

    Have a look in table T77S0 for an entry called QUALI ESSST and make sure the object ID stored there matches the appropriate node in your qualifications catalogue.
    This setting is designed to be used for restricting ESS users to a particular part of the Quals Catalogue.
    If the table entry was configured in your development system, it may not match the obect numbers in your production system.

  • Security processor was unable to find a security header in the message. This might be because the message is an unsecured fault or because there is a binding mismatch between the communicating parties.

    We have a web role where we have hosted a WCF service.
    We are facing the below exception intermittently on consuming the service.
    Security processor was unable to find a security header in the message. This might be because the message is an unsecured fault or because there is a binding mismatch between the communicating parties.   This
    can occur if the service is configured for security and the client is not using security.
    This is intermittent. Few calls fail , and the subsequent calls succeed without making any changes.
    Please help in overcoming this abnormal behavior.
    Thanks in advance !!
    Best Regards ,
    Eswar

    Hi Eswar,
    As the error message mentioned, it may be a mismatch between the configuration on the client and the server.Try putting all your configuration in a binding configuration and then use the same binding configuration on the server and client. Since this issue
    is more related with WCF, I suggest you move to WCF forum, it is appropriate and more experts will assist you.
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • We are unable to find a user that matches the Rep.ID and Password you have entered. Please verify and try again. work on IE but now Firefox

    We are unable to find a user that matches the Rep.ID and Password you have entered.
    Please verify and try again.
    I get this error when trying to access my Wild Tree web site
    http://resources.wildtree.com/MyWildtree/RepLogin.aspx?ReturnUrl=%2fmywildtree%2fMain.aspx
    I can log in just fine to the main page, but then they make you log in again as you go deeper into the site for Security reasons. But when I log in the 2nd time, I get the above error. Help

    This can be caused by corrupted cookies or cookies that are blocked (check the permissions on the about:permissions page).
    *https://support.mozilla.org/kb/fix-login-issues-on-websites-require-passwords
    Note that you may have to enable third-party cookies for that domain or for visited sites.
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history"
    Clear the cache and cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
    If clearing cookies doesn't work then it is possible that the <i>cookies.sqlite</i> file that stores the cookies is corrupted.
    Rename (or delete) <b>cookies.sqlite</b> (cookies.sqlite.old) and delete other present cookies files like <b>cookies.sqlite-journal</b> in the Firefox profile folder in case the file cookies.sqlite got corrupted.
    *http://kb.mozillazine.org/Cookies
    *https://support.mozilla.org/kb/Deleting+cookies

  • Error MSB3323: Unable to find manifest signing certificate in the certificate store.

    Problems began when I received the MSDN Final VS 2005 v8.0.50727.42 and uninstalled the RC build which I had worked with without issue and replaced it with the previously mentioned.
    After four or so installs/uninstalls I got past the Invalid license data. Reinstall is required. http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=162712&SiteID=1
    I have tested C++ project builds for managed and unmanaged code and both work without a problem. My C# projects however fail to build, the error I get is:
    ------ Rebuild All started: Project: D And P, Configuration: Release Any CPU ------
    C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Microsoft.Common.targets(1718,7): error MSB3323: Unable to find manifest signing certificate in the certificate store.
    Done building project "D And P.csproj" -- FAILED.
    ========== Rebuild All: 0 succeeded, 1 failed, 0 skipped ==========
    If anyone has any idea of what a next step is please let me know.

    I got the same problem but I was tring to strong name my application.  I was able to solve the problem by opening the XXX.csproj file in a text editor (notepad.exe) and remove the following tags from the XML.
    <ManifestCertificateThumbprint>...</ManifestCertificateThumbprint>
    <ManifestKeyFile>...</ManifestKeyFile>
    <GenerateManifests>...</GenerateManifests>
    <SignManifests>...</SignManifests>
    It seem that someone (another member of my team) was playing with the OneClick stuff, but didn't check in the strong name key files he used.  But did check in the project file.
    Then when I created the new strong name key file and signed the EXE, something was out-of-sync with the above tags in the probject file and the new key file.
    Removing these tags may be a bad thing (someone from MS will need to comment) but it worked for me.

  • Unable to find Project Show Categories in the JDeveloper main menu

    Hello -
    I am as new to OAF development as it gets...
    I have the same questions that were asked in the forum already on this posting: Unable to find Project > Show Categories in the JDeveloper main menu
    However, the questions were never answered and I cannot reply to that posting.
    Here are the original questions...
    I am working on tutorials in Jdeveloper 10.1.3.3.0.
    Can any one of you know about "Show Categories"
    Unable to find Project > Show Categories in the JDeveloper main menu Jdeveloper 10.1.3.3.0
    I am looking this example and try to create the same from C:\p9172975_R12_GENERIC\jdevdoc\WebHelp\toolbox\labs\lessons\search\exercise.htm
    See Step 1.3 Organize Your Project Into Categories.
    Question 2) I didnt understand Step 2 also.
    Select the TutorialLabs.jpr project in the Navigator, right-click and select New Business Components Package... from the context menu.
    I am unable to find New Business Components Package.
    Please help.  Thanks!
    Steve

    Hi Steve,
    Have you created new OA workspace for that ?
    Also check this link for JDev setup and running helloWorldPG:
    http://sushantsharmaa.blogspot.in/2012/09/jdeveloper-setup-for-oa-framework.html
    --Sushant

  • Unable to find my info package in the info source

    Hi all,
    I am unable to find my info package in the info source, When i try to activate data from ODS to Cube then i can see the Info package, I have to do any setting for this problem or any suggestions guys.
    Thank you
    DST

    Hi DST,
    It might be that you are using someone elses DataSource hence you don't see the InfoPackage for your InfoSource and the other person has loaded data into all the data targets including yours. Hence you see the InfoPackage in the ODS.
    Try to find the InfoPackage location for all the InfoSources. in the InfoSources make select find and give the InfoPackage name from the ODS. It should give the location of the InfoPackage.
    Hope this helps!!
    NewBW

  • Why do I get a error saying mail was unable to find your reply. You may have deleted message.

    when sending email, I sometimes get an error stating: Mail was unable to find your reply to:  You may have deleted message. This does not happen with every sent message but it is doing it more and more. The reply is no where to be found.

    You posted in a 4 month old dead post. 
    You would do better by posting a "New Topic" in the OS/Mail forum area of which os you are using.  You will need to indicate which version os you are using as well as which version of Mail you are using in order to get the proper attention to your post.  This will help the users reading your post to suggest solutions.

  • HT1338 where do I find what to put in the incoming server on Mail?

    I can't get any of my mail from  my @me.com account or even my gmail accout through Mail. I have deleted all but one email which I never use trying to get the stupid thing to work now I am trying to add my accounts back to Mail and I cant find what to put in the incoming server. I can't find where to find what to put there or anything of help or a bit useful. What the heck is the stupid thing and can I have it tattooed to my harddrive so I never have to look for it again?
    Thanks for any help.
    Cora

    Thanks Topher,
    But..I tried that...It fixed the me.com but not the gmail or ymail I am not sure what the deal is. I am also having issues with my computer freezing up, weird icons (spotlight in the top right of the screen, a USA flag by the time and date) I Just got rid of the Flag by clicking on it and un checking the show icon box but I have done that everyday for weeks and it is just now taking it off the screen. I got rid of the spotlight bar by restarting my computer. Sometimes I cant even shut down my computer because Mail or Safari wont allow it even though I shut all the windows and even quit the apps.
    Half the time It wont stay connected to the internet either... and when it does it runs so slow its mind numbing.
    I am wondering if there is a trojan or something going on other than I cant figure out how to work Mail after using it for 4 years...O.o
    Any ideas?

  • I am having bugs with the ios 5, after it got the update it is unable to make outgoing calls. in-place the incoming and outgoing texts are working please help me asap...!

    i am having bugs with the ios 5, after it got the update it is unable to make outgoing calls. in-place the incoming and outgoing texts are working please help me asap...!

    Sometimes and this is network dependant if they suspect the phone to be lost or stolen as in this case with change of Sim card and provider then the origonal network can and some will block the phone untill you have rang them and proven it's not the case or if you have bough this 2nd hand then the origonal seller may have stopped paying the contract bill and thus the phone is blocked

  • What are the best ways (for best performance) in MII to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?

    Hi All,
    Can you please suggest to choose the best ways (for best performance) in MII (12.2 on NW 7.3), to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?
    Thanks

    Hi Surya,
    Best practices for flow of data from ECC --> SAP MII --> Shop floor & Vice verse:
    1. Send ECC data through IDOC's/RFC's as messages to SAP MII message listener and BSL transaction process data and update directly on shop floor database as if you configured in Data services or later send those data by web service to shop floor system (i.e. depends on Shop floor machines).
    From Shop floor:
    shop floor --> SAP MII --> ECC
    1. Use either Web service or fetch data from DB and pass data to BAPI's  for sending to ECC through BLS transaction.
    Regards,
    Praveen Reddy

  • Individual entries cannot be put into the change request (message SV141)

    Hi,
    I am trying to save an activity that I have created for SOP (Production>SOP>Function>Mass Processing>Define Activities).
    When I click on the IMG node, I get the following message:
    "Individual entries cannot be put into the change request
    Message no. SV141
    Diagnosis
    For technical reasons, the entries cannot be fully specified in the change request. There are two possible reasons for this:
    1. The key of an entry is longer than 120 characters. All entries whose keys match up to character 119, are then copied into the change request, rather than an individual entry.
    2. The key of an entry contains fields of special data types, for example, packed numbers. The key can only be specified in the change request up to the first such field from the left.
    all entries whose keys match up to character 12 are copied into the change request, rather than a single entry.
    System Response
    The selected entry is copied into the change request correctly, but other entries may be copied as well."
    Can anyone explain why and if I have to do something to ensure it is captured in the CTS?
    Thanks,
    Lars

  • Adfs/ls does not work while adfs/ls/idpinitiatedsignon works | There are no registered protocol handlers on path /adfs/ls/ to process the incoming request

    Hello Experts
    I am trying to configure ADFS 3.0 with Sharepoint 2013 and facing an issue with ADFS 3.0 url
    When I try to access url https://<ADFS.domain.com>/adfs/ls - I face following error 
    Encountered error during federation passive request. 
    Additional Data 
    Protocol Name: 
    Relying Party: 
    Exception details: 
    Microsoft.IdentityServer.RequestFailedException: MSIS7065: There are no registered protocol handlers on path /adfs/ls/ to process the incoming request.
       at Microsoft.IdentityServer.Web.PassiveProtocolListener.OnGetContext(WrappedHttpListenerContext context)
    But When I try to access ADFS url - https://<ADFS.domain.com>/adfs/ls/idpinitiatedsignon 
    It works.. 
    Is it normal behavior or something wrong here.
    Please suggest.
    Thanks

    /adfs/ls/ is the endpoint for all "passive" protocols. a Plain GET to /adfs/ls wil complain (correctly) that the plain GET is not a correct SAML or WS-Fed message. You should only send correct messages to that EndPoint........
    Paul Lemmers

Maybe you are looking for