Unable to find a wireless adapter to work with OS X v 10.2.8

Does anyone know of a wireless adapter card manufacturer that will work with OS X v 10.2.8. I know I purchased one a few years ago that would work, but I can't remember the manufacter's name or the model number of the card.PCMCIA cardbuss.

Albert,
If you wish to run a third-party 802.11g 54Mbps wireless card, 10.2.8 will support it, but I believe you also have to install AirPort 3.1.1 available here:
http://docs.info.apple.com/article.html?artnum=70176
The above software supports a wireless card that uses the Broadcom chipset, but no other. Here is a list of older, supported cards:
http://bcm-specs.sipsolutions.net/Chipsets
Almost all of the newer cards that use the Broadcom require 10.3.x or newer; I believe it has to do with firmware changes on the card.
There are also companies that supply both a card and software for a complete package. Here is a company that has a new, compatible card with Airport software:
http://macsense.com/product/networking/wpe800.html
There are also the slower 802.11b 11Mbps cards that will work, but they require a third-party driver. Here is one software package with a list of supported (b) cards:
http://macsense.com/product/networking/aerouni.html
There is also a freeware driver for supported (b) cards:
http://wirelessdriver.sourceforge.net/index.html

Similar Messages

Unable to find ODI_SAmple_DATA.zip file to work with oracle profiling.

I am unable to find ODI_SAmple_DATA.zip file to work with oracle profiling.Any help regarding profiling???Do i need to
copy it from sw installation folder.?How profiling is different or related to odi data quality???Do we take source data twice -
1) For ODI target load
2)For profiling into entities.

Try:
http://www.oracle.com/technology/products/oracle-data-quality/pdf/oracledq_sample_data.zip
and
http://download.oracle.com/otn/nt/ias/101340/oracledq_sample_directory.zip
Hope this helps.
G

Does the Xbox 360 wireless adapter even work with the WRT54G wireless router?!!? If so, how???

I just bought a WRT54G wireless router (Ver 8.0; firmware updated to latest). I have successfully connected my wireless laptop using WEP security, but I'm at wits end trying to get the Xbox 360 wireless adapter to work. (It worked just fine with my Netgear router until that router recently died.)
When I do the "Test Media Connection" routine (you XBox 360 users know what I'm referring to), the Xbox immediately recognizes the Network Adapter and indicates that it is connected to the Wireless Network, but it inevitably fails the next step in the process: IP Address. I have the set-up for the IP address to be assigned automatically by the router (which is set for DHCP Server enabled).
I have gone around the mountain innumerable times myself and then with well-meaning friends who say try this, try that, try this, try that. I've had to re-establish my laptop set-up so many times I wanna scream!
Are the Xbox 360 wireless adapter and the WRT54G even compatible? If so, what am I missing here? I'm not too technical and obviously in over my head, but this ought not be that hard.
Please, please do NOT respond unless you KNOW the answer! I don't mean to be curt, but I'm over / past "suggestions to try."
Thank you VERY much for your time and consideration if you can help me.

I don't think that the X-BOX adapter is not compatible to wireless rotuer .... there are few settings you can try on the router ... Access router setup page ... Please click on the tab "Application and gaming" and click on sub tab "Port range forwarding" 1) On the first line in Application box type in "Xbox", in start box type in 88, in end box type in 88, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 2) On the second line in Application box type in "Xbox", in start box type in 3074, in end box type in 3074, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 3) Now save the settings 4) Once you return to the setup page, click on the tab "Administration" and disable the UPNP and save the settings. 5) Now assign the given ip address on your xbox ip address :- 192.168.1.20 subnet mask :- 255.255.255.0 default gateway :- 192.168.1.1 Please assign the dns address on the xbox primary dns :- 4.2.2.2 secondary dns :- 192.168.1.1 6) Please try to test your xbox live. Hope it works ...

Pavilion G7 wireless adapter stopped working and now will no longer boot.

I bought a Pavilion G7 about 7 months ago.
After a couple of months, the wireless adapter stopped working, it just disappeared from the Device Manager (Win7 Home).
I reset the computer to factory settings and it fixed that problem.
One month after this, the wireless adapter problem returned, I tried to use system recovery to restore it to a previous point, no luck.
I closed the laptop after this, didn't turn it off.
Opened it up and decided to watch a video I had on there, I had to pause the video halfway through (used Windows media player). Came back to continue watching and the screen was black. No lightbar activity, just blackness.
I pressed a few buttons, nothing.
Decided to do a hard reset (hold the power button for 8 seconds) then I left it and turned it on again, the blank screen returned, no signs of life, no boot, no HDD activity, nothing. The caps lock button was on, the wireless light (of course) was orange.
What on Earth has gone wrong? What can I do to fix this?
Thanks.

Hi
You have a couple of options as I see it please find the web link given below might help you fix the issue.
Solve Setup and Internet Connection Issues on a Wireless Network with Windows 7
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Reg Unable to find URL for Adapter Engine Error

Hello,
During execution of a scenario, i am getting these errors in sxmb_moni:
AE_DETAILS_GET_ERROR
3: Unable to find URL for Adapter Engine af.xip.poecspxioo4
Error when reading the access data (URL, user, password) for the Adapter Engine.
Seems like it is a problem of XI Server unable to locate the Central adapter engine due to some parameter not set properly.
So, what are the points we can check while installation of XI so as to rectify this problem.

Hi all,
I got the similar error in my scenario and i solved the same.Actually i ma not pretty surte this will solve your problem.
In my case proxy generation settings was mis configured in the sender system. so its caused the reason.
I made an entry in the SPROXSET table and i did other activities like RFC and application system also.
Then its worked for me. Its not matching with your case please do ignore this one
Regards
Vijay

HT3728 AIRPORT UTILITY IS UNABLE TO FIND ANY WIRELESS DEVICE 5.6.1

Ok So I have bought a 2TB Time Capsule, for the past few weeks we have been doing our backups on it etc and just using our already installed Netgear wireless router. Tonight I decided I would "extend an already existing wireless router" - after following all the steps etc and then clicking apply etc, the Airport Utility said that it would need to restart the time capsule etc. After about 5 mins and it looked like it had frozen, airport utility re-started and now all i get is:
"Airport Utility is Unable to find any wireless device. Make Sure the Airport Wireless Device you want to set up is plugged in and in range of your computer, and then click rescan"
I have clicked Rescan like 10 times
I have quit and restarted Airport Utility as well as my Mac OSX 10.5.8
I have pulled the Time Capsule plug out of it and restarted it
I have turned of my airport on my computer and turned it back on again
I have read a number of posts - yet nothing seems to give me any more options other than to rescan.

If you are trying to connect the Time Capsule to the Netgear router using a wireless only connection, Apple's "extend a wireless network" feature was designed to only work with other Apple routers. It is extremely unlikely that this setting would work with a Netgear product.
You will need to start over again and perform a Factor Default Reset on the Time Capsule and then re-configure it back to the original settings that you set up previously.
Resetting an AirPort Base Station or Time Capsule FAQ

Need a wireless usb adapter that works with my iMac G4 Flatscreen

I have an iMac without an airport card. I am trying to find a thrid party solution. Does anyone know of a third party wireless usb adapter that works with my Mac?
Linda

Hi Bill I noticed that list you posted mainly shows devices that require purchasing 3rd party drivers from companies such as ioxperts.
If you use a device that has ralink chipset you can use their drivers free of charge.
ralink drivers
Devices that use ralink chipsets

No_messaging_url_found: Unable to find URL for Adapter Engine

Hi,
I am facing the same problem. I have configured a RFC-File scenario.
I get the error"no_messaging_url_found: Unable to find URL for Adapter Engine af.<SID>.<server>"
and <INTERNAL.AE_DETAILS_GET_ERROR>
I get the error "no_messaging_url_found: Unable to find URL for Adapter Engine" when I execute the Function Module SAI_AE_DETAILS_GET.
This error occured in the line 235( sap_xi_adapter_services = sld_accessor->associators( iref = sap_xi_adapter_framework assocclass = 'SAP_HostedXIAdapterServi) of the FM.
The value is not filled and i get the error mentioned.
I have gone through thread and verified all the points mentioned.
I have checked SXI_CAHCE,there are no locked users in RSUSR200,
SXI_CACHE, Goto->AdapterEngine Cache, I have an entry af.<sid>.<server>
In SLD,Technical Landscape,Exchange Infrastructure I have the entry <SID>.<Server> against the Adapter Engine
But as was mentioned in the thread the line 241 of the Fucntion Module has 'adapterType' and not 'Adaptertype' as in the exchange profile.I did not try changing 'a' to 'A'.
Could you please let me know how to solve the problem.
Thanks in advance.

Hi Vani,
Check the pipeline URL in the SLD
Business System->URL
It should be
http://host:HTTPport/sap/xi/engine?type=entry
Just check this thread- may be useful-
File Adapter - Sender Problem
RFC adapter - AE_DETAILS_GET_ERROR - no adapter engine
https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
Hope this helps,
Regards,
Moorthy

Unable to find URL for Adapter Engine af.xid.xidev ?

Hi,
I have scenario.
Abap proxy -
> ccBPM -
> RFC (synchronous).
The error happen for ccBPM -
> RFC
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>2: Unable to find URL for Adapter Engine af.xid.xidev</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Any idea for what happening ?
Cheers
Fernand

Hi.
Have you tried with this
Re: Wrong Adapter Engine on RWB?
Regards
Seshagiri

Unable to find URL for Adapter Engine

Hi,
We have installed the XI 7.0 and I have realized a simple scenario "File > XI > File" in order to validate the installation... and on has a dump around Adapter Framework.
Inside SXMB_MONI, on has the following error:
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.xid.bcnssap006</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.xid.bcnssap006</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.xid.bcnssap006</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
It's probably a problem with aii but which one ?

Hi Mickael,
The problem that you are facing looks like it is unable to connect to the adapter engine itself, please check the following:-
The userid being used must have the authorizations of group SAP_XI_APPL_SERV_USER on the Integration Server.
*During the configuration of the adapter (From Help documentation):-
<i>Specifications for the Integration Engine
Enter the complete address (URL) of the Integration Engine that you want to send the message to:
XI.TargetURL=http://IntegrationEngineHost:port/pipeline-arguments
This specification is mandatory.</i>
One suggestion:- Please try the following and see if you are still facing the problem, this might help you in decreasing the number of places to verifyconfigurations!
Again, from help:-
<i>The Integration Engine address can also be accessed dynamically from the SAP System Landscape Directory (SLD). The following entry is added to the configuration for this purpose:
XI.SLDConfiguration=SLDaccessor
In this case the URL of the corresponding Integration Server for the system specified with XI.SenderService is read from the SLD and used instead of the value specified under XI.TargetURL. Therefore, specify the following:
XI.TargetURL=<fromSLD>
To be able to access the SLD, the SLDaccessor service must be configured correspondingly and the respective entries must be maintained in the SLD.</i>
Hope this helps!
-Sushumna

Error : Unable to find URL for Adapter Engine

Hi Experts,
I have searched several forums , but i am not clear on how to resolve this error.
I am using XI 3.0, my scenario is File->XI->File
I am getting this error in SXMB_MONI.
*Can any body suggest me a clear step-by-step procedure to solve it.*
   <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.xd2.host-dev</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.xd2.host-dev</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.xd2.hydrus-dev</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks
sai

Hi Debashish,
Thanks for ur reply,
I have executed
--->Execute SAI_AE_DETAILS_GET from se37
>Enter AE name:<host>.<systemid>
After executing, i got these param
Exception       NO_ADAPTER_ENGINE_FOUND
Message ID:          SAI_GLOBAL                 Message number:           016
Message:
no_adapter_engine_found: Unable to find Adapter Engine host-DEV.XD2
Exchange profile parameters are like this
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call terminated sucessfully
Retrieved value of
section   = Connections
parameter = com.sap.aii.ib.server.connect.webas.r3.ashost
-> value =
and i dont have authorizations for SU01 fro lock/unlock.
Any suggestions how to proceed.
Thanks
Sai

StarTech Adapter not working with Dell Inspiron 15, model 3521

Side Note: I wrote a reply to a thread that was from 2013. I do apologize because the link was sent to me by my bf and I did not realize how old it was. Since my reply has to be approved I can't delete it.
Current Issue: StarTech Adapter not working with Dell Inspiron 15 model 3521
I bought my Dell laptop last year and at first I did not realize that it had only one audio jack (combo, as the specifications manual says), I only noticed when I was trying to plug in my Ozone Rage ST headset.
I searched online threads and found out that I needed an adapter and most people mentioned Headset Buddy. I couldn't find any adapters for sale in my country (or employees didn't really know what I was talking about) and since Headset Buddy is a bit expensive, I decided to try StarTech Headset adapter for headsets with separate headphone/microphone plugs - 3.5mm 4 position to 2x 3 position 3.5mm M/F www.amazon.com/.../ref=cm_cr_pr_product_top.
It arrived today and let me tell you that I can't make it work. I can hear everything but I can't get the external mic to work or even be detected. I have always used my headset (mostly for gaming) and I prefer to use my external mic rather than the internal one. First I connected my headphone and mic jacks to the adapter and only after that did I connect it to the laptop combo jack. I also tried vice-versa. It didn't work, regardless of the order. I even tried with a different headset and it still didn't work. What else can I do?
I have also found a thread on Dell forums saying that Headset Buddy doesn't even work on Dell Inspiron 15, model 3521. So since it doesn't work and I'm assuming StarTech doesn't, either, what am I to do/buy?! I am getting extremely frustrated and I'm very disappointed with Dell because the brand should have included with the laptop a proper working adapter for these situations and not make its customers buy an extra accessory to make whatever working gear they already had function. It just doesn't make sense to me! Either make the changes work properly or simply don't touch anything. I spent some of my savings on this laptop which, overall, is great but now I am being forced to spend more on an item to allow me to use my headset. I am running out of options here and even Dell can't seem to tell its customers with 100% certainty what really works for this specific model.
If I can't make the adapter work, I just hope I can return it, otherwise I'll end up with no refund and with a piece of equipment I have no other use for!
Any thoughts?

Hi,
Thanks for your reply.
This is the first time I was forced to buy adapters such as these so I don't know if I'm doing something wrong or if there's anything else I can do to make it work. When I plug the adapter to my Dell, the laptop presents me with several options such as: headphones, headphone, speakers, skull candy headphones, etc (maybe some may have different names but since I see them in Portuguese, I'm not quite sure how they appear for someone who has the computer in English), I have picked different options and it still doesn't work, the only noticeable changes are sound quality related, I guess.

Am considering buying a Time Capsule. But all specs I read about it (re: printing) is how to hook up a printer via USB connection. Need to confirm...that a wireless printer will work with the router feature of the Time Capsule. I assume yes...?

Am considering buying a Time Capsule. But all specs I read about it (re: printing) is how to hook up a printer via USB connection. Need to confirm...that a wireless printer will work with the router feature of the Time Capsule. I assume yes...?

A wireless printer connects to the network just like your computer, or iPhone/iPad, etc. connects using wireless.
The printer must be set up intially to scan to "find" available wireless networks, then your specific wireless network needs to be selected. Then the password for the network needs to be entered.
Once the printer is configured to join the network, it is always connected to the network. No further configuration is required.

Mini dvi to dvi adapter not working with monitor

arright *** i got a mini dvi to dvi adapter which is connected to my vga monitor through a vga to dvi adapter. The computer recognizes the monitor in display preferences, but the monitor doesn't display anything it just sits in standby mode... any ideas why this isn't working? You'd think if the problem was going from vga-vga to dvi adapter-dvi to mini dvi adapter that it wouldn't even recognize the monitor but it does.
well that *****, back to best buy to get the other one. Reason i got the dvi one is because i plan on getting a different monitor with dvi soon. But noo dvi adapter wont work with vga adapters.
Message was edited by: Veiss

The mini-DVD to DVI adapter doesn't pass through the analog video signals needed for VGA, so won't work with a DVI to VGA adapter. All the control signals are there, so the display is recognized, but there will be no picture.
They could have used a DVI-D connector on the adapter, instead of DVD-I, so the DVI to VGA adapter wouldn't even plug in, but then it couldn't be used with some non-Apple LCDs, that use DVD-I connecters.

Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing.

Unable to find a wireless adapter to work with OS X v 10.2.8

Similar Messages

Maybe you are looking for