Unable to find activated 2LIS_02_ITM datasource in BW system.
Hi,
I am trying to extract data for 2LIS_02_ITM extractor. I have activated data source in R3 and can see the records in RSA3. When I try to assign data source in BW system it does not show me 2LIS_02_ITM in corresponding logistic system (R3 system).
Please let me know what is the problem? How can I see activated datasource 2LIS_02_ITM while assigning data source?
Points for sure
Thank You,
-Neha
Meha
to make sure you have done the replication for the right system source go to transaction rsds in your BW system in order to make the replication in a single manner type in the name of datasource 2LIS_02_ITM select the R3 or ECC Source system from where you have activate it, the source system should be listed in the match code then with the menu in the top select replicate datasource sure it will work.
And other thing if you work on bi 7 a confusion araise is that when you go to datasources in the modeling window in the workbench you have to select in the top for which system you want to see the datasources and by default it is the BW so select the appropriate hope this could help you Sir.
regards
Boujema
Similar Messages
-
Newfs error: "Unable to find Media type. Proceeding with system determined"
Hi,
I have the Solaris 10 update 6 installed on one server:
bash-3.00# more /etc/release
Solaris 10 10/08 s10x_u6wos_07b X86
Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 27 October 2008
bash-3.00#
I have noticed that if I run command newfs, I get the following error: "Unable to find Media type. Proceeding with system determined parameters."
bash-3.00# newfs /dev/md/rdsk/d100
/dev/md/rdsk/d100: Unable to find Media type. Proceeding with system determined parameters.
newfs: /dev/md/rdsk/d100 last mounted as /export
newfs: construct a new file system /dev/md/rdsk/d100: (y/n)? y
/dev/md/rdsk/d100: Unable to find Media type. Proceeding with system determined parameters.
/dev/md/dsk/d100 is mounted, can't mkfs
bash-3.00#
What does this error mean? It did not occurr in earlier versions of Solaris. Can it be ignored or maybe the syntax for newfs has changed and I am doing something incorrectly?
Thanks,
Przemek[natural weight loss diet|http://www.goarticles.com/cgi-bin/showa.cgi?C=1633072]
[confessions of a lazy super affiliate|http://www.squidoo.com/lazysuperaffiliate-reviewdetails]
[how to stop panic attacks|http://simple-fix.blogspot.com/2009/04/how-to-stop-panic-attacks-permanently.html]
[Acer AS4530-6823|http://www.goarticles.com/cgi-bin/showa.cgi?C=1638379]
Anwar [http://healthy-weight-loss-plan.info/about/index.html] -
Forest trust unable to find Active Directory Domain Controller
I have two domains with a two-way forest trust. We'll call them ForestA and ForestB. They're on seperate subnets. ForestA's DCs are in one physical location. ForestB's DCs are in two locations, one of which is shared with A.
I'm unable to route traffic directly from the remote DC in ForestB to the subnet ForestA is on, so I created a new DC in ForestA that sits on the subnet ForestB uses (basically, I can't route between subnets via the wireless bridge between locations, but
can within the same location).
I found this: http://www.neomagick.net/zen/2008/11/30/using-dns-to-force-a-domain-trust-through-a-specific-domain-controller-dc/
I followed the instructions to set the new DC in forest A to be the only one the remote DC in forest B was aware of.
Nslookup ForestA.com resolves correctly to this DC, but I'm unable to validate the trust relationship, getting the error:
"Windows cannot find an Active Directory Domain Controller for the ForestA.com domain. Verify that an AD DC is available and then try again."
I'd appreciate any help.In the event viewer, have you found any event id's that corrospond with this error? Have you ensured all ports required are open? Windows firewall is correctly setup? NIC is properly configured?
Statement below taken from: http://technet.microsoft.com/en-us/library/cc961803.aspx
If you receive the following error, ERROR_NO_LOGON_SERVERS while using the Nltest tool to query the secure channel, this is usually indicative of the inability to find a domain controller for that domain. Run nltest /dsgetdc: < DomainName > : to verify
whether you can locate a domain controller. If you are unable to find a domain controller examine DNS registrations and network connectivity.
ADDS Ports:
http://msdn.microsoft.com/en-us/library/dd772723(v=ws.10).aspx -
Unable to find Active Users Concurrent Program in Submit Requests Form
We applied a patch 9647331 on our development instance (R12.1.1). It completed succesfully. But when we are trying to submit ACTIVE USERS concurrent request, we are unable to find it in the Submit Requests Form.
However, we are able to submit the Active Users program using CONCSUB.
Not sure if the patch has done anything.
Please suggest.
Regards,
RA.We applied a patch 9647331 on our development instance (R12.1.1). It completed succesfully. But when we are trying to submit ACTIVE USERS concurrent request, we are unable to find it in the Submit Requests Form.From which responsibility?
Have you verified if the concurrent program is added to the Request Group which is linked to this responsibility?
Not sure if the patch has done anything. I do not think so. Was the patch applied successfully included all pre-reqs?
Thanks,
Hussein -
Unable to find buisness content datasources
hi sdn,
I'm checking follwing datasources in rsa5 and rsa6 in r/3 sides but unable to find it out
2LIS_01_S262
2LIS_01_S261
2LIS_01_S260
2LIS_01_S263
pls guide me from where to findHi Rubane,
these are the old LIS structure and you are not suppose to use these. look for new structures like 2LIS_11, 2LIS_12... which have replace these.
Also have a look at LO Cockpit Web log by Roberto to understand it better -
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
Also there are many more by him
Hope it helps
Regards
Vikash -
Hi, I am writing a Powershell script locally on my machine to aggregate data from SharePoint 2010 and Active Directory. All groups in our SP environment are Active Directory Domain Groups (AD DG). Accessing group members via SharePoint is not
possible (as many of you already know). My plan was to pull Domain Group lists and aggregate AD DG data with SharePoint data (permission levels, etc...). I unfortunately ran into a problem when I realized that AD DGs are not considered "SP
Groups" but instead are considered user???
How do I leverage SharePoint web services to perform an action similar to /_vti_bin/UserGroup.asmx > GetRoleCollectionFromGroup? I do not want to perform this action on the server, but locally on my machine. When I run the below script
it throws a 401 error and complains it "can't find the group". Keep in mind I am trying to get info on a
AD Domain Group, not a
SharePoint Group. I think that is the underlying reason this request keeps failing as I tested the below script on SP groups and it worked perfectly.
clear
$CRED = Get-Credential
[System.Net.ServicePointManager]::ServerCertificateValidationCallback = { $true }
$uri = "http://{site}/_vti_bin/UserGroup.asmx"
$soap = '<?xml version="1.0" encoding="utf-8"?>'
$soap+= '<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">'
$soap+= '<soap:Body>'
$soap+= '<GetRoleCollectionFromGroup xmlns="http://schemas.microsoft.com/sharepoint/soap/directory/">'
$soap+= '<groupName>TestGroup</groupName>'
$soap+= '</GetRoleCollectionFromGroup>'
$soap+= '</soap:Body>'
$soap+= '</soap:Envelope>'
[xml]$WF = Invoke-RestMethod $uri -Credential $CRED -Method POST -ContentType "text/xml" -Body $soap
echo $WF
$WF.Envelope.Body.GetRoleCollectionFromGroupResponse.GetRoleCollectionFromGroupResult.GetRoleCollectionFromGroup.Roles.Role
Thank you.Hi, I am writing a Powershell script locally on my machine to aggregate data from SharePoint 2010 and Active Directory. All groups in our SP environment are Active Directory Domain Groups (AD DG). Accessing group members via SharePoint is not
possible (as many of you already know). My plan was to pull Domain Group lists and aggregate AD DG data with SharePoint data (permission levels, etc...). I unfortunately ran into a problem when I realized that AD DGs are not considered "SP
Groups" but instead are considered user???
How do I leverage SharePoint web services to perform an action similar to /_vti_bin/UserGroup.asmx > GetRoleCollectionFromGroup? I do not want to perform this action on the server, but locally on my machine. When I run the below script
it throws a 401 error and complains it "can't find the group". Keep in mind I am trying to get info on a
AD Domain Group, not a
SharePoint Group. I think that is the underlying reason this request keeps failing as I tested the below script on SP groups and it worked perfectly.
clear
$CRED = Get-Credential
[System.Net.ServicePointManager]::ServerCertificateValidationCallback = { $true }
$uri = "http://{site}/_vti_bin/UserGroup.asmx"
$soap = '<?xml version="1.0" encoding="utf-8"?>'
$soap+= '<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">'
$soap+= '<soap:Body>'
$soap+= '<GetRoleCollectionFromGroup xmlns="http://schemas.microsoft.com/sharepoint/soap/directory/">'
$soap+= '<groupName>TestGroup</groupName>'
$soap+= '</GetRoleCollectionFromGroup>'
$soap+= '</soap:Body>'
$soap+= '</soap:Envelope>'
[xml]$WF = Invoke-RestMethod $uri -Credential $CRED -Method POST -ContentType "text/xml" -Body $soap
echo $WF
$WF.Envelope.Body.GetRoleCollectionFromGroupResponse.GetRoleCollectionFromGroupResult.GetRoleCollectionFromGroup.Roles.Role
Thank you. -
Unable to find activated workbooks
Hi All,
I have activated set of workbooks based on infocube 0SD_C01 from BI Content. But when i try to open activated workbooks using Analyzer,
i am not able to find the activated workbooks neither in Roles nor in Favorites also not using FIND option.
I am able to run the workbooks from RRMXP tcode (but all text are in German) and RSRWORKBOOK table contains the entry for the activated workbooks.
I tried to open the workbooks from both 3.5 & 7.0 BEx but no luck. I searched SDN for the same and couldnt located appropriate thread.
Is this related to authorization? Could you please help me in resolving this issue?
Regards,
Pruthvi RHi Murali,
Thanks for your reply. the problem is solved by adding the roles attached to workbook, to the user.
Some workbooks doesnot have any roles with it and they are not visible to some users. Any idea which authrization is required to view the workbooks without specific role?
Regards,
Pruthvi R
Edited by: Pruthvi R on Oct 12, 2009 5:58 PM -
Unable to find activation server
Just had my phone unlocked and then upgraded the O/S on my 3GS. Now I cannot activate it for some reason. Called Apple support who now say there is nothing they can do, however for £126 they will gladly sell me a replacement phone.
They it is my choice to upgrade the OS, therefore my issue if it doesn't work. Is this a scam?It makes a difference because some hacks / jailbreaks can alter the phone in such a way as to render it unable to activate if the phone is restored or updated.
The only thing you can do that might get it working is find out what carrier it is locked to and contact them regarding a legitimate unlock.
You don't say how, exactly, you got it unlocked.
If you did have it legitimately unlocked and it still won't activate, then you may as well sell it for scrap and buy a new one. -
Unable to find active skype name
Hi,
I am searching skype name gsstindia but no result found msg is coming however name is active and in use.
Why name not reflcting in skype directory search?Are you sure that this Skype Name is exactly gsstindia? Searching for this name gives no results.
-
Unable to see the generic datasource in BI system
Hi All,
I have created the Generic datasource in R3 using Function Module. i could see the Datasource in RSA6 .When i have replicated i could not find the datasource in the BI system .The source system is connected perfectly.could you please let me know the reason or im missing anything
Regards
AKthanks for your reply.
One more point is i could not find the application component hierarchy in BIW.i tried the RSA9 too
In R3 i have saved in MM Application component.
Regards
AK -
Runtime error while activating LO Datasource in Source System
Hi Gurus,
I have followed the below steps to activate the SD related LO extractor in ECC
1. RSA5 --> Select all the 2LIS_11,12&13 data source and activate
2. LBWE --> Choose the 2LIS_11,12&13 data source and activate.
Upon execution of the second step , the system return me the following runtime error
Runtime Errors DDIC_TYPE_INCONSISTENCY
Date and Time 07.07.2011 10:14:29
Short text
Inconsistency in the Dictionary for the structure "MCQALSB".
What happened?
Error in the SAP kernel.
The current ABAP "SAPLMCEX" program had to be terminated because the
ABAP processor detected an internal system error.
Error analysis
There is an internal system error.
eliminated with ABAP/4.
Trigger Location of Runtime Error
Program SAPLMCEX
Include LMCEX$04
Row 26
With this error i cant proceed to activate any of the LO data source
Please help
Thanks in advanceThe table MCQALSB need to be activated in SE11 and LBWE works fine
-
Error: Unable to find file image browser on you system??? help
I keep getting this error when I try and add an image to my form. I can do it on another computer with no problem, but on my work one who these forms are for it's not working. but I can add images to anything else, word, excel, etc, just not in LiveCycle.
I obviously have an image browser, but how can I get Livecycle to recognize it?
Thanks :-)My goodness jamieboo, its been 4 years since you posted this! And no answer is here as of yet, especially needed this to be answered now that I have identical problem.
Good Luck
Jim -
Unable to find data in RSA3 for particular fields2lis_04_p_arbpl datasource
I am working with datasource 2lis_04_p_arbpl to construct Yield Report. I have a field GAMNG(Target Quantity) in the table AFKO, so I added it to the communication structure and activated it. I also want the field IGMNG(confirmed quantity) which is available in the table AFKO but not appearing in the pool tables of ARBPL datasource, so I have done datasource enhancement and obtained the field in the datasource. When I am checking for the data in RSA3, unable to find data(zero values) for both the fields.
Edited by: bhagav on Jan 5, 2012 1:20 PMHi ,
Please make sure that you are doing the extractor check in Update mode 'Full' .If the setup tables are filled then this should pick the data for the 2 newly added fields .
check and update accordingly later .
Thanks
Kamal Mehta -
Unable to find any active legal regulations for determination proc. "TEST1"
Hi Guys
This is in regards to a Customs document for a Payment doc
We have just finished the configuration of the Finance integration which will stop blocked partners during the Payment run
Now when we create a Proposal in the Payment run in ECC, the same document gets transferred to GTS, now even though the SPL is active when we check the Log there is a message Unable to find any active legal regulations for determination proc
Upon further investigation of the customs document i found 2 things
1) In the Geography section Country of Departure is populated with US, but the Country of destination is blank, this might be a reason as the Legal regulation checks both the countries and then activate, any idea how i can get the same to populate?
2) If the above population does happen, from which partner type should it come from, as in my customs document only Vendor and Bank is there, in the PO customs document this is being populated properly
Any idea what is wrong here?
Thanks
CarlHi Dave
Thanks for answering again.
I have tried activating it at country level, country/country, country/group, Same result in case of all
As i know now since the Country of Destination is missing, it cannot activate the last two, but the same is also not working at country level.
So is there anyway to maybe have some partner function which can populate the Destination country.
Any other advice will be really helpful..
Thanks
Carl -
Unable to find 0CB_WT_TEXT Datasource in R/3 source system.
Hi Experts,
I am unable to find 0CB_WT_TEXT(Workbook / Template Text) Data source in RSA5 and RSA6.
i need to pull the data into 0CB_WT infoobject.
Its very urgent, please help me to find the datasource in R/3.
Regards,
RajHi,
Just place the cursor on SAP folder and press the + button.
Then once done try to search the datasource as mentioned above.If it is still not available check in BW system as well and not in R/3..It is shown as BI content as
DataSource Type
Texts (Master Data)
Application Components
0BCT_CB_IO
Available as from OLTP Release
BI Content 3.5.2 Add-On
Delivery with
BI Content 3.5.2 Add-On
Thanks and regards
Kiran
Maybe you are looking for
-
Top 10 Queries in Database...
Hello Guys, My boss wants to know the database queries ran in last 10 days. What is the best way to get this informatiom. He also wants to know the top 10 heavy quries that took the most cpu resources and time. We have database 10g release 2 and OEM
-
HT1515 How to setup laptop use both 3G internet and audio via Airport Express
Laptop connected to internet via 3G mobile phone network, but when connected simultaneously an Airport Express to stream audio, the laptop can not connect to internet as it try to connect internet through Airport Express. So how to setup to use both.
-
Raw 3.1 professional custom profiles for highend digital cameras
I have a few questions for thomas knoll: I would like to start with a statement here: WHY ??? ....all this messy color calibration with slider inside the raw 3.1 plugin , when it could be so easy and simple : what you can find already inside high end
-
ArrayIndexOutOfBound in JTabbedPane
Hi all, I am getting following bug when adding tab to JTabbedPane. Exception in thread "AWT-EventQueue-0" java.lang.ArrayIndexOutOfBoundsException: 0 at javax.swing.plaf.basic.BasicTabbedPaneUI$ScrollableTabSupport.updateView(BasicTabbedPaneUI.java:3
-
Just wondering if anyone has used the lynda.com online training service. If you have please post your thoughts on the service. BTW they do offer ilife application training including iweb. Thanks in advance.