Unable to find addresses
I am unable to find the addresses that I synch to my blackberry from outlook. I click on my address book and there are no address listed. When I check properties it tells me I have 121 entries. I try to use the find command and it doesn't pull up any names.
Solved!
Go to Solution.
Greg... Open your Address Book > press the Menu key (left of the trackball) > click Filters > UNcheck all filters and save.
Watcha see?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
Unable to Find Address Without Wireless Network Co...
Nokia Maps v.2 on my phone attempts to search for an address on-line every time I enter a destination point. 99% of time it works great but only when I have wireless network coverage (I am using AT&T Wireless). However, we just went to Maine, where ATT's wireless coverage stinks. In the area where we had no wireless coverage the phone was attempting to find the address on-line and after a minute or so would return a message "unable to find the address."
Since I had Maine maps downloaded on the phone, how do I get the phone to use the databased stored on the phone instead?Yup, an IP of 169.254....is self-assigned when it cannot get one from the router. The WPS button does not reset the router.
Do this on the printer: Setup > Network > Wireless Setup WIzard. Follow the instructions.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer. had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address. this one wants job code. i don't believe mac allows for input on job code or printer code for permission to print
I'm having similar problems with an HP OfficeJet 6500. One suggestion that improved the situation, but did not totally solve the problem, was to select "OfficeJet Pro L7700" for its drivers.
One other suggestion is to turn off the printer, then simultaneously hold down the "#" and "9" keys and turn the printer back on. This hot key seems to reset the printer to factory defaults, allowing you to set things up anew.
Finally, kvetch to HP. Their networking software clearly has problems in its relationship to OSX, but nobody on either side seems motivated to bring in a good therapist. -
Device in the data base getting PXE aborted --unable to find machine using Mac address /resouce iD
hi
when I deploy osd to my unknown collection iam getting PXE aborted ..earlier we used to delete machines from sccm
by searching query based on Mac address .and clear last pxe advertisement option , but iam finding certain machines getting PXE aborted shows device in data base when we search these machines using mac address /resouce iD unable to find in sccm or
sccm data base . I have found some blogs where unknown collection parameters are changed to decommissioned value from "o" to "1"
but unable to build new unknown collection , its very difficult to delete machines from SCCM console every time when pxe aborted . machines are getting pxe aborted some way its known to SCCM ,its difficult to import machines every time before machines are
image .is there any permanent solution to override pxe aborted ,even systems are known to SCCM ,we are in sccm 2012 infrastructure
hoping a positive replay from all technical leads
thanks in advance
ankithHi,
"is there any permanent solution to override pxe aborted ,even systems are known to SCCM ,we are in sccm 2012 infrastructure"
I think there is not a permanent solution.
It could help if you first run the configuration manager report to locate a particular MAC address.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Missing data: Unable to find a product registration record associated with your e-mail address
Hi,
I'm getting this error which has also been reported by other users:
See your benefit >
Missing data: Unable to find a product registration record associated with your e-mail address (Adobe ID). If you feel this is incorrect, please contact Adobe customer support.
Is there something that can be done?
Regards,
PetteriHi David,
I logged in with my Adobe ID and was directly taken to a profile page "Your Account / Personal Information". On this page there was a banner "Claim your exclusive benefit today". By clicking the link I received the error:
Missing data: Unable to find a product registration record associated with your e-mail address (Adobe ID). If you feel this is incorrect, please contact Adobe customer support.
I had received similar offer already before so I was little supprised to receive it again.
Here is similar issues experienced by two users:
http://forums.adobe.com/message/5186156
Regards,
Petteri -
Problem with Java keystore and certificates (unable to find valid cert path
Our program is made so that when a certificate is not signed by a trusted Certification Authority, it will ask the user if he/her wishes to trust the certificate or not. If they decide to trust the certificate, it will accept the self signed certificate and import it into the keystore and then use that certificate to log the user in. This works fine. It will import the certificate into the keystore and use the specified ip address to establish a connection with the LDAP server (Active Directory in our case) and authenticate properly. However, the problem arises when we then try and connect to a different ip address (without restarting tomcat, if we restart tomcat, it works fine...). It imports the certificate into the keystore fine, but always gives the exception
"Root exception is javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target"
and does not authenticate with our LDAP server (which is Active Directory). The problem seems to be that it is no longer looking at the System.setProperty("javax.net.ssl.trustStore", myTrustStore);
I have tried multiple times to just reset this property and try and "force" it to read from my specified trust file when this error happens. I have also imported the certificates directly into the <java_home>/jre/lib/security/cacerts and <java_home>/jre/lib/security/jssecacerts directories as the java documentation says that it will look at those directories first to see if it can find a trusted certificate. However, this does not work either. The only way that I can get this to work is by restarting tomcat all together.
If both of the certificates are already in the keystore before tomcat is started up, everything will work perfect. Again, the only problem is after first connecting to an IP address using TLS and importing the certificate, and then trying to connect to another IP address with a different certificate and import it into the keystore.
One of the interesting features of this is that after the second IP address has failed, I can change the IP address back to the first one that authenticated successfully and authenticate successfully again (ie
I use ip 1.1.1.1, import self signed certificate, authenticates successfully
login with ip 2.2.2.2 import self signed certificate, FAILS
login again with 1.1.1.1 (doesn't import certificate because it is already in keystore) successfully authenticates
Also, I am using java 1.5.0_03.
Any help is greatly appreciated as I've been trying to figure this out for over a week now.
ThanksPlease don't post in threads that are long dead and don't hijack other threads. When you have a question, start your own topic. Feel free to provide a link to an old post that may be relevant to your problem.
I'm locking this thread now. -
Unable to find line break between two lines in attachment file.
Dear all I will be very great full if someone help me out,
I am trying to send mail through SMTP server with an attachment of oracle report, but I am unable to find line break between two lines, when I down load the attachment from mail and open attach.txt file by double click on it. Next line starts right after previous line ends, it should starts with new line.
In order to send an attachment file, I am reading source file line by line and put MIME protocol’s attachment instance, contain of source file is being properly written into target file if I open that attachment on cmd prompt.
Following code may help you to understand the case.
Thanks in advance.
My code is as follows:-
create or replace procedure bec_file_test
v_subject varchar2, -- Subject of the email
v_body varchar2, -- Body of the email
v_from VARCHAR2 default 'XYZ.com', -- sender mail id
v_to varchar2 default 'XYZ.com', -- Field To of the email
v_cc varchar2 default 'XYZ.com' -- cc address
) is
-- variable to hold the smtp server connection
v_smtp_connection utl_smtp.connection;
-- variable to hold the smtp host name
v_smtp_host varchar2(100) default 'mail.bec-group.com';
-- variable to hold the smtp port
v_smtp_port number default 25;
-- composite of {CR}{LF} caridge return and line feed.
CRLF varchar2(2):=CHR(13)||CHR(10);
cursor pr_rec is
select requisition_no,line_no,release_no,a.contract,
a.project_id,substr(a.activity_seq,1,11)ACT_SEQ,
substr(a.part_no,1,12)PART_NO,
substr(a.description,1,32)DESCRIPTION,
substr(a.Bal_qty,1,8) BAL_QTY,
substr(a.unit_meas,1,5)UOM,
a.wanted_receipt_date WAN_REC_DT,
a.latest_order_date LAT_ORD_DT
from bec_pr_line_rep a
where a.Bal_qty>0 and a.header_state not in 'Closed'
and upper(a.state1) like 'RELEASED' and a.contract not in ('U1ENG','ULENG','U1FND','U2FND')
and a.buyer_code='70306'
order by a.part_no;
begin
declare
fHandle UTL_FILE.FILE_TYPE;
v_msg_line varchar2(2000);
-- v_buffer varchar2(20000);
--ALTER SYSTEM SET utl_file_dir = 'D:\Database\temp'
--COMMENT='Temporary change on Dec 14'
--SCOPE=SPFILE;
SELECT name, value
FROM gv$parameter
WHERE name = 'utl_file_dir';
--drop directory my_directory
--CREATE or replace DIRECTORY my_directory AS 'D:\database\temp';
--GRANT read,write ON DIRECTORY my_directory TO PUBLIC;
begin ---writing data into a file.
fHandle := UTL_FILE.FOPEN('MY_DIRECTORY', 'pending_pr_summry.txt', 'w');
UTL_FILE.put_line(fHandle, ' Pending PR to process (detail report)');
UTL_FILE.put_line(fHandle,TO_CHAR(SYSDATE,'MM-DD-YY HH:MI:SS AM'));
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
UTL_FILE.put_line(fHandle, 'Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt' );
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
for pr_temp in pr_rec loop
begin
v_msg_line:=to_char(rpad(pr_temp.requisition_no,12,' ')||'|'||
lpad(pr_temp.line_no,3,' ')||'|'||
lpad(pr_temp.release_no,3,' ')||'|'||
rpad(pr_temp.contract,7,' ')||'|'||
lpad(nvl(pr_temp.project_id,' '),7,' ')||'|'||
lpad(nvl(pr_temp.act_seq,' '),12,' ')||'|'||
lpad(pr_temp.part_no,12,' ')||'|'||
rpad(pr_temp.description,35,' ')||'|'||
lpad(pr_temp.bal_qty,10,' ')||'|'||
rpad(pr_temp.uom,6,' ')||'|'||
lpad(pr_temp.wan_rec_dt,14,' ')||'|'||
lpad(pr_temp.lat_ord_dt,14,' '));
UTL_FILE.put_line(fHandle,v_msg_line);
end;
end loop;
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
UTL_FILE.put_line(fHandle, ' Regards : IFSAPP ( Application owner ) ');
UTL_FILE.FCLOSE(fHandle); ------------writing into file is successfuly done here!
--Reading of file starts here containt will be added in attchment file
fHandle :=UTL_FILE.FOPEN('MY_DIRECTORY','pending_pr_summry.txt','R' );
-- establish the connection to the smtp server
v_smtp_connection := utl_smtp.open_connection(v_smtp_host, v_smtp_port); /** OPEN CONNECTION ON THE SERVER **/
-- perform a handshake with the smtp server
utl_smtp.helo(v_smtp_connection, v_smtp_host); /** DO THE INITIAL HAND SHAKE **/
-- set the 'from' address of the message
utl_smtp.mail(v_smtp_connection, v_from);
-- add the recipient to the message
utl_smtp.rcpt(v_smtp_connection, v_to);
-- send the email
utl_smtp.open_data(v_smtp_connection);
v_msg_line:='Date: ' || TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss' ) || CRLF ||
'From: ' || v_from || CRLF ||
'Subject: ' || v_subject || CRLF ||
'To: ' || v_to || CRLF ||
'Cc: ' || v_cc || CRLF ||
'MIME-Version: 1.0'|| CRLF || -- Use MIME mail standard
'Content-Type: multipart/mixed;'||CRLF ||
' boundary="-----SECBOUND"'||CRLF||
CRLF ||'-------SECBOUND'|| CRLF ||
'Content-Type: text/plain;'|| CRLF ||
'Content-Transfer_Encoding: 7bit'|| CRLF ||
CRLF ||v_body|| CRLF; -- Message body
utl_smtp.write_data(v_smtp_connection,v_msg_line);
v_msg_line:='-------SECBOUND'|| CRLF ||
'Content-Type: application/octet-stream;'|| CRLF ||
'Content-Type: text/plain;'|| CRLF ||
'name="pending_pr_summry.txt"'|| CRLF ||
'Content-Transfer_Encoding: 8bit'|| CRLF ||
'Content-Disposition: attachment;'|| CRLF ||
' filename="pending_pr_summry.txt"'|| CRLF || CRLF; -- Content of attachment
utl_smtp.write_data(v_smtp_connection,v_msg_line);
-- check file is opened
IF utl_file.is_open(fHandle) THEN
-- loop lines in the file
LOOP
BEGIN -- Content of attachment
utl_file.get_line(fHandle,v_msg_line);
v_msg_line:=concat(v_msg_line,CRLF);
utl_smtp.write_data(v_smtp_connection,v_msg_line);
EXCEPTION
WHEN NO_DATA_FOUND THEN
EXIT;
END;
END LOOP;
END IF;
--end of attachment containt
utl_smtp.write_data(v_smtp_connection,v_msg_line);
UTL_FILE.FCLOSE(fHandle);
utl_smtp.close_data(v_smtp_connection);
utl_smtp.quit(v_smtp_connection);
exception
when utl_smtp.invalid_operation then
dbms_output.put_line(' Invalid Operation in Mail attempt using UTL_SMTP.');
when utl_smtp.transient_error then
dbms_output.put_line(' Temporary e-mail issue - try again');
when utl_smtp.permanent_error then
dbms_output.put_line(' Permanent Error Encountered.');
when others then
dbms_output.put_line('Exception: SQLCODE=' || SQLCODE || ' SQLERRM=' || SQLERRM);
RAISE;
end;
end bec_file_test;Pending PR to process (detail report)01-17-13 12:43:19 PM--------------------------------------------------------------------------------------------------------------------------------------------------Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt--------------------------------------------------------------------------------------------------------------------------------------------------MAT/250370 | 2| 1|ISCSP | 4977| 100004207| 0104000016|Angle 50 X 50 X 6 IS:2062 Grade |500|kg |30-NOV-2012| 20-nov-2012MAT/250370 | 3| 1|ISCSP | 4977| 100004207| 0105000002|Channel 100 X 50 IS:2062 Grade A | 1000|kg | 30-NOV-2012| 20-nov-2012MAT/250579 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 2991|kg | 13-DEC-2012| 03-dec-2012MAT/250606 | 2| |NMDCJ | 6002| 100005860| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | |1|NMDCJ|6001|100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 1500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 3| 1|NMDCJ | 6002| 100005818| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 3939|kg | 29-DEC-2012| 19-dec-2012MAT/250606 | 4| 1|NMDCJ | 6002| 100005860| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 39000|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 4| 1|NMDCJ | 6001| 100005580| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 2| 1|NMDCJ | 6002| 100005818| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 12183|kg | 29-DEC-2012| 19-dec-2012MAT/250606 | 6| 1|NMDCJ | 6002| 100005860| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 9500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 6| 1|NMDCJ | 6001| 100005580| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 6| 1|NMDCJ | 6002| 100005818| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 7| 1|NMDCJ | 6001| 100005580| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 22000|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 7| 1|NMDCJ | 6002| 100005818| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 27060|kg | 29-DEC-2012| 19-dec-2012MAT/251138 | 1| 1|NMDCJ | 6002| 100005825| 3501000001|Cement 50 kg | 1|pkt | 25-DEC-2013| 14-dec-2013--------------------------------------------------------------------------------------------------------------------------------------------------
where as source file is like that:-
Pending PR to process (detail report)
01-17-13 12:43:19 PM
Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt
MAT/250370 | 2| 1|ISCSP | 4977| 100004207| 0104000016|Angle 50 X 50 X 6 IS:2062 Grade | 5500|kg | 30-NOV-2012| 20-nov-2012
MAT/250370 | 3| 1|ISCSP | 4977| 100004207| 0105000002|Channel 100 X 50 IS:2062 Grade A | 1000|kg | 30-NOV-2012| 20-nov-2012
MAT/250579 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 2991|kg | 13-DEC-2012| 03-dec-2012
MAT/250606 | 2| 1|NMDCJ | 6002| 100005860| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 1500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 3| 1|NMDCJ | 6002| 100005818| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 3939|kg | 29-DEC-2012| 19-dec-2012
MAT/250606 | 4| 1|NMDCJ | 6002| 100005860| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 39000|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 4| 1|NMDCJ | 6001| 100005580| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 2| 1|NMDCJ | 6002| 100005818| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 12183|kg | 29-DEC-2012| 19-dec-2012
MAT/250606 | 6| 1|NMDCJ | 6002| 100005860| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 9500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 6| 1|NMDCJ | 6001| 100005580| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 6| 1|NMDCJ | 6002| 100005818| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 7| 1|NMDCJ | 6001| 100005580| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 22000|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 7| 1|NMDCJ | 6002| 100005818| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 27060|kg | 29-DEC-2012| 19-dec-2012
MAT/251138 | 1| 1|NMDCJ | 6002| 100005825| 3501000001|Cement 50 kg | 1 |pkt | 25-DEC-2013| 14-dec-2013
Ignore alignment. It is well formatted in source file. -
Unable to find an Output Post Processor service to post-process request
Hi experts,
Users complaining that they could not able to generate the PDF.
User Complaint:
The program does not generate the PDF. The program just generates the XML output. The logfile shows that “Unable to find an Output Post Processor service to post-process request 25852905.”
EBS: 12.1.2
OS: RHEL 5.5
DB: 11.1.0.7.0
Steps that we tried:
1. Increased the OPP process to 16
2. Increased Concurrent:OPP Response Timeout to 750
3. There is no issue in manager log file.
4. Concurrent Requests Fail Due to Output Post Processing (OPP) Timeout (Doc ID 352518.1)
5. Restarted CM. Ran CMclean.
6. Re: Output Post Processor
7.Unable to View pdf Output File Created by XML Publisher
But we dont find any solutions over the above.
Log:
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_order_by='TRX_NUMBER'
p_trx_number_low='8414037'
p_trx_number_high='8414037'
p_open_invoice='N'
p_check_for_taxyn='N'
p_choice='SEL'
p_header_pages='1'
p_debug_flag='Y'
p_message_level='10'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Enter Password:
REP-0004: Warning: Unable to open user preference file.
MSG-00100: DEBUG: AfterPForm_Trigger +
MSG-00100: DEBUG: Multi Org established.
MSG-00100: DEBUG: AfterParam_Procs.Get_Country_Details
MSG-00100: DEBUG: Get_Country_Description.
MSG-00100: DEBUG: AfterParam_Procs.Switch_On_Debug
MSG-00100: Running in debug mode
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_Low
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_High
MSG-00100: DEBUG: AfterParam_Procs.Get_Tax_Option
MSG-00103: lp_trx_date_clause = and a.trx_date = a.trx_date
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choice: SEL
MSG-00500: DEBUG: About to build WHERE clause.
MSG-00500: DEBUG: WHERE clause built.
MSG-00100: DEBUG: Choice is other than ADJ, setting ORDER BY.
MSG-00500: DEBUG: Table 1: AR_ADJUSTMENTS COM_ADJ,
AR_PAYMENT_SCHEDULES P,
RA_CUST_TRX_LINE_GL_DIST REC,
RA_CUSTOMER_TRX A,
HZ_CUST_ACCOUNTS B,
RA_TERMS T,
RA_TERMS_LINES TL,
RA_CUST_TRX_TYPES TYPES,
AR_LOOKUPS L_TYPES,
HZ_PARTIES PARTY,
HZ_CUST_ACCT_SITES A_BILL,
HZ_PARTY_SITES PARTY_SITE,
HZ_LOCATIONS LOC,
HZ_CUST_SITE_USES U_BILL
MSG-00500: DEBUG: Table 2: RA_TERMS_LINES TL,
RA_CUST_TRX_TYPES TYPES,
AR_LOOKUPS L_TYPES,
HZ_CUST_ACCOUNTS B,
HZ_PARTIES PARTY,
HZ_CUST_SITE_USES U_BILL,
HZ_CUST_ACCT_SITES A_BILL,
HZ_PARTY_SITES PARTY_SITE,
HZ_LOCATIONS LOC,
AR_ADJUSTMENTS COM_ADJ,
RA_CUSTOMER_TRX A,
AR_PAYMENT_SCHEDULES P,
RA_TERMS T
MSG-00500: DEBUG: Where 1: A.BILL_TO_CUSTOMER_ID = B.CUST_ACCOUNT_ID
AND REC.CUSTOMER_TRX_ID = A.CUSTOMER_TRX_ID
AND REC.LATEST_REC_FLAG = 'Y'
AND REC.ACCOUNT_CLASS = 'REC'
AND P.PAYMENT_SCHEDULE_ID + DECODE(P.CLASS,
'INV', 0,
= COM_ADJ.PAYMENT_SCHEDULE_ID(+)
AND COM_ADJ.SUBSEQUENT_TRX_ID IS NULL
AND 'C' = COM_ADJ.ADJUSTMENT_TYPE(+)
AND A.COMPLETE_FLAG = 'Y'
AND A.CUST_TRX_TYPE_ID = TYPES.CUST_TRX_TYPE_ID
AND L_TYPES.LOOKUP_TYPE = 'INV/CM/ADJ'
AND A.PRINTING_OPTION IN ('PRI', 'REP')
AND L_TYPES.LOOKUP_CODE =
DECODE( TYPES.TYPE,'DEP','INV', TYPES.TYPE)
AND NVL(P.TERMS_SEQUENCE_NUMBER,nvl(TL.SEQUENCE_NUM,0))=nvl(TL.SEQUENCE_NUM,nvl(p.terms_sequence_number,0))
AND DECODE(P.PAYMENT_SCHEDULE_ID,'',0, NVL(T.PRINTING_LEAD_DAYS,0))=0
AND A.BILL_TO_SITE_USE_ID = U_BILL.SITE_USE_ID
AND U_BILL.CUST_ACCT_SITE_ID = A_BILL.CUST_ACCT_SITE_ID
AND A_BILL.party_site_id = party_site.party_site_id
AND B.PARTY_ID = PARTY.PARTY_ID
AND loc.location_id = party_site.location_id
AND NVL(LOC.LANGUAGE,'US') = 'US'
AND A.TERM_ID = TL.TERM_ID(+)
AND A.TERM_ID = T.TERM_ID(+)
AND A.CUSTOMER_TRX_ID = P.CUSTOMER_TRX_ID(+)
MSG-00500: DEBUG: Where 2: A.BILL_TO_CUSTOMER_ID = B.CUST_ACCOUNT_ID
AND P.PAYMENT_SCHEDULE_ID + DECODE(P.CLASS,
'INV', 0,
= COM_ADJ.PAYMENT_SCHEDULE_ID(+)
AND COM_ADJ.SUBSEQUENT_TRX_ID IS NULL
AND 'C' = COM_ADJ.ADJUSTMENT_TYPE(+)
AND A.COMPLETE_FLAG = 'Y'
AND A.CUSTOMER_TRX_ID = P.CUSTOMER_TRX_ID
AND A.CUST_TRX_TYPE_ID = TYPES.CUST_TRX_TYPE_ID
AND L_TYPES.LOOKUP_TYPE = 'INV/CM/ADJ'
AND A.PRINTING_OPTION IN ('PRI', 'REP')
AND L_TYPES.LOOKUP_CODE =
DECODE( TYPES.TYPE,'DEP','INV', TYPES.TYPE)
AND NVL(T.PRINTING_LEAD_DAYS,0) > 0
AND A.BILL_TO_SITE_USE_ID = U_BILL.SITE_USE_ID
AND U_BILL.CUST_ACCT_SITE_ID = A_BILL.CUST_ACCT_SITE_ID
AND A_BILL.PARTY_SITE_ID = PARTY_SITE.PARTY_SITE_ID
AND B.PARTY_ID = PARTY.PARTY_ID
AND LOC.LOCATION_ID = PARTY_SITE.LOCATION_ID
AND NVL(LOC.LANGUAGE,'US') = 'US'
AND NVL(P.TERMS_SEQUENCE_NUMBER,TL.SEQUENCE_NUM)=TL.SEQUENCE_NUM
AND T.TERM_ID = P.TERM_ID
AND TL.TERM_ID(+) = T.TERM_ID
MSG-00100: DEBUG: AfterPForm_Trigger -
MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Printing_Option
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 26
MSG-00100: DEBUG: BeforeReport_Trigger -
MSG-05000: DEBUG: Trx No... 8414037
MSG-00100: DEBUG: Get_Country_Description.
MSG-00010: 12:03 1 Transaction: 8414037
MSG-00100: DEBUG: Get_Country_Description.
MSG-00100: DEBUG: Get_Country_Description.
MSG-05000: DEBUG: Remit To Address....
MSG-05000: DEBUG: Address Style:
MSG-05000: DEBUG: Address 1: 11000 IH-35 NORTH
MSG-05000: DEBUG: Address 2:
MSG-05000: DEBUG: Address 3:
MSG-05000: DEBUG: Address 4:
MSG-05000: DEBUG: City: AUSTIN
MSG-05000: DEBUG: County:
MSG-05000: DEBUG: State: TX
MSG-05000: DEBUG: Province:
MSG-05000: DEBUG: Postal Code: 78753
MSG-05000: DEBUG: Territory:
MSG-05000: DEBUG: Country_Code: US
MSG-05000: DEBUG: Customer Name:
MSG-05000: DEBUG: Bill To:
MSG-05000: DEBUG: First Name:
MSG-05000: DEBUG: Last Name:
MSG-05000: DEBUG: Mail Stop:
MSG-05000: DEBUG: Country Code: US
MSG-05000: DEBUG: Country Desc:
MSG-05000: DEBUG: Print Home Flag: N
MSG-05000: DEBUG: Width: 40
MSG-05000: DEBUG: Height Min: 6
MSG-05000: DEBUG: Height Max: 6
MSG-05000: DEBUG: Remit To Formatted... 11000 IH-35 NORTH
AUSTIN TX 78753
MSG-05000: DEBUG: Bill To Address....
MSG-05000: DEBUG: Address Style:
MSG-05000: DEBUG: Address 1: 2481 ROSS CRES
MSG-05000: DEBUG: Address 2:
MSG-05000: DEBUG: Address 3:
MSG-05000: DEBUG: Address 4:
MSG-05000: DEBUG: City: NORTH BATTLEFORD
MSG-05000: DEBUG: County:
MSG-05000: DEBUG: State:
MSG-05000: DEBUG: Province: SASKATCHEWAN
MSG-05000: DEBUG: Postal Code: S9A3R3
MSG-05000: DEBUG: Territory:
MSG-05000: DEBUG: Country_Code: CA
MSG-05000: DEBUG: Customer Name: VAUGHN FAUTH
MSG-05000: DEBUG: Bill To:
MSG-05000: DEBUG: First Name: VAUGHN
MSG-05000: DEBUG: Last Name: FAUTH
MSG-05000: DEBUG: Mail Stop:
MSG-05000: DEBUG: Country Code: US
MSG-05000: DEBUG: Country Desc:
MSG-05000: DEBUG: Print Home Flag: N
MSG-05000: DEBUG: Width: 40
MSG-05000: DEBUG: Height Min: 8
MSG-05000: DEBUG: Height Max: 8
MSG-05000: DEBUG: Bill To Formatted... VAUGHN FAUTH
VAUGHN FAUTH
2481 ROSS CRES
NORTH BATTLEFORD SASKATCHEWAN S9A3R3
Canada
MSG-05000: DEBUG: Ship To Address....
MSG-05000: DEBUG: Address Style:
MSG-05000: DEBUG: Address 1: 2481 ROSS CRES
MSG-05000: DEBUG: Address 2:
MSG-05000: DEBUG: Address 3:
MSG-05000: DEBUG: Address 4:
MSG-05000: DEBUG: City: NORTH BATTLEFORD
MSG-05000: DEBUG: County:
MSG-05000: DEBUG: State:
MSG-05000: DEBUG: Province: SASKATCHEWAN
MSG-05000: DEBUG: Postal Code: S9A3R3
MSG-05000: DEBUG: Territory:
MSG-05000: DEBUG: Country_Code: CA
MSG-05000: DEBUG: Customer Name: VAUGHN FAUTH
MSG-05000: DEBUG: Bill To:
MSG-05000: DEBUG: First Name:
MSG-05000: DEBUG: Last Name:
MSG-05000: DEBUG: Mail Stop:
MSG-05000: DEBUG: Country Code: US
MSG-05000: DEBUG: Country Desc:
MSG-05000: DEBUG: Print Home Flag: N
MSG-05000: DEBUG: Width: 40
MSG-05000: DEBUG: Height Min: 8
MSG-05000: DEBUG: Height Max: 8
MSG-05000: DEBUG: Ship To Formatted... VAUGHN FAUTH
2481 ROSS CRES
NORTH BATTLEFORD SASKATCHEWAN S9A3R3
Canada
Report Builder: Release 10.1.2.3.0 - Production on Wed Sep 25 12:03:07 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
+------------- 1) PUBLISH -------------+
Unable to find an Output Post Processor service to post-process request 25854362.
Check that the Output Post Processor service is running.
+--------------------------------------+
+------------- 2) PRINT -------------+
Not printing the output of this request because post-processing failed.
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Can any one please guide me for this issue.?.
Thanks,
VasanthHussein,
FNDOPP log file
9/25/13 10:47:48 AM] [Thread-31] Service thread starting up.
[9/25/13 10:47:48 AM] [EXCEPTION] [OPPServiceThread0] java.sql.SQLException: ORA-24067: exceeded maximum number of subscrib
ers for queue APPLSYS.FND_CP_GSM_OPP_AQ
ORA-06512: at "APPS.FND_CP_OPP_IPC", line 85
ORA-06512: at line 1
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1034)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:191)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:950)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1225)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3387)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3488)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:3857)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
at oracle.apps.fnd.cp.opp.OPPAQMonitor.initAQ(OPPAQMonitor.java:558)
at oracle.apps.fnd.cp.opp.OPPAQMonitor.init(OPPAQMonitor.java:534)
at oracle.apps.fnd.cp.opp.OPPAQMonitor.initialize(OPPAQMonitor.java:89)
at oracle.apps.fnd.cp.opp.OPPServiceThread.init(OPPServiceThread.java:94)
at oracle.apps.fnd.cp.gsf.BaseServiceThread.run(BaseServiceThread.java:135)
[9/25/13 11:04:11 AM] [EXCEPTION] [OPPAQMON:876235] ORA-04021: timeout occurred while waiting to lock object
[GC 20321K->4065K(63360K), 0.0137050 secs]
Thanks,
Vasanth -
HELP MY MAC IS BROKE AND WONT START (unable to find driver ACPI)
Someone please help. I was reinstalling a printer driver and my power cut off while it was installing. now the computer wont start and i get this message below... I read to use the install dvd but my CD drive is broke and wont take cds. I did manage to hook it up to my dads computer with target disk mode so i can access files. his computer is a windows though. i do have a copy of the Leopard install cd saved as a DMG on his computer and a 8gb flash to boot it but i cant format the flash drive to be mac extended journaled GUID from his computer.IS there a program to do this???I dont know what needs to be fixed or where i can get this acpi driver? can anyone help because i dont have any money to get this fix and i need my mac for college which im starting soon.
This is the error message
panic(cpu 0 caller 0x004384FF): "unable to find driver for this platform: \"ACPI\".\n"@/SourceCache/xnu/xnu-1228.12.14/iokit/Kernel/IOPlatformExpert.cpp: 1407
(That is the first line. It goes on to say...)
Debugger called: <panic>
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
(then there are 7 lines that start with 0x2f5d3 followed by)
Backtrace terminated-invalid frame pointer 0
BSD process name corresponding to current thread: Unknown
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 9.7.0: Tue Mar 31 22:52:17 PDT 2009; root:xnu-1228.12.14~1/RELEASE_I386
System uptime in nanoseconds: 180744654
It also says 64bit mode enabled and i thought macs were 32bit.
I also tried resetting the pvram or whatever its called and no luck
Someone please help!!!!I know this isn't what you really want to hear but I'd recommend taking it in to an authorized repair location or your local Apple Store to get the Superdrive repaired or replaced so you can do an install? I don't believe you will be able load from your Dad's Window's machine. However you might be able to from an external DVD drive.
Also I might recommend getting a UPS so if you have similar issues you will have enough power to do a proper shutdown.
Regards,
Roger -
[Solved] Unable to find root device
Hi guys,
it's been three days now that my laptop refuses to boot with a message from systemd like this:
ERROR: device 'UUID=xxx...' not found. Skipping fsck.
ERROR: Unable to find root device 'UUID=xxx...'.
You are being dropped to a recovery shell.
That said, keep in mind that I'm saying "three days" just because it's in the past two days that I've spent most of the time searching in the Internet for a solution of what seems just to be a well-known, very common problem, especially when it arises after a kernel upgrade (as in my case).
But believe me, I've been trying this and that through the live Arch Linux environment, but without the slightest improvement: regeneration of the initramfs, regeneration of /etc/fstab, reconfiguration of GRUB (although this was clearly unhelpful, since the problem arises when the kernel has already been booted), small changes in the hooks in /etc/mkinitcpio.conf, small changes to some modules loaded at boot, downgrading linux... Nothing works.
I'm now writing from another computer, so I cannot post the entire output of useful commands now, but if you need to know something I will give you the necessary information.
In the meanwhile, notice that I use Linux LVM partition with logical volumes formatted with Btrfs, without encryption.
It's strange that even with the dowgrade from Linux 3.18.3 (the one after whose installation the system was unusable) to 3.18.2 the problem still remains.
However, the only thing I managed to take from my system is the output of dmesg, obtained from the recovery shell, after having set the debug settings for systemd in the kernel command line before booting.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.4-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jan 27 20:45:02 CET 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=345f6168-2ff7-41fd-bf0e-050d4dd6795d systemd.log_level=debug systemd.log_target=kmsg log_buf_len=1M rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000913ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000091400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c8c6cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c8c6d000-0x00000000dae8cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dae8d000-0x00000000daeb6fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000daeb7000-0x00000000db802fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000db803000-0x00000000dbafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021edfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Dell Inc. Latitude E5550/0YM97J, BIOS A03 10/30/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21ee00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 base 00DE000000 mask 7FFE000000 uncachable
[ 0.000000] 4 base 00DD000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 021F000000 mask 7FFF000000 uncachable
[ 0.000000] 6 base 021EE00000 mask 7FFFE00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xc8c6d max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fda70-0x000fda7f] mapped at [ffff8800000fda70]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21ec00000-0x21edfffff]
[ 0.000000] [mem 0x21ec00000-0x21edfffff] page 2M
[ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21ebfffff]
[ 0.000000] [mem 0x21c000000-0x21ebfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xc8c6cfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xc8bfffff] page 2M
[ 0.000000] [mem 0xc8c00000-0xc8c6cfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] log_buf_len: 1048576 bytes
[ 0.000000] early log buf free: 519600(99%)
[ 0.000000] RAMDISK: [mem 0x3539c000-0x369c5fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000EF280 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000DAE960A8 0000CC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DAEA9C60 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DAE96200 013A5B (v02 DELL CBX3 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000DB800F80 000040
[ 0.000000] ACPI: APIC 0x00000000DAEA9D70 000084 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DAEA9DF8 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000DAEA9E40 00009C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000DAEA9EE0 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DAEA9F20 000038 (v01 DELL CBX3 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DAEA9F58 0004B5 (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x00000000DAEAA410 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x00000000DAEAA458 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120913)
[ 0.000000] ACPI: ASF! 0x00000000DAEAB0D8 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x00000000DAEAB178 00051F (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DAEAB698 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DAEAC210 0001C7 (v02 PmRef LakeTiny 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DAEAC3D8 0003A5 (v02 CppcTa CppcTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: PCCT 0x00000000DAEAC780 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DAEAC7F0 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DAEAD2B8 0041AC (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DAEB1468 004508 (v01 DptfTa DptfTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SLIC 0x00000000DAEB5970 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.000000] ACPI: MSDM 0x00000000DAEB5AE8 000055 (v03 DELL CBX3 06222004 AMI 00010013)
[ 0.000000] ACPI: DMAR 0x00000000DAEB5B40 0000B0 (v01 INTEL BDW 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021edfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21ecfa000-0x21ecfdfff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216800000-ffff88021e3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21edfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00090fff]
[ 0.000000] node 0: [mem 0x00100000-0xc8c6cfff]
[ 0.000000] node 0: [mem 0x100000000-0x21edfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x21edfffff]
[ 0.000000] On node 0 totalpages: 1997309
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3984 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12786 pages used for memmap
[ 0.000000] DMA32 zone: 818285 pages, LIFO batch:31
[ 0.000000] Normal zone: 18360 pages used for memmap
[ 0.000000] Normal zone: 1175040 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xdd200000-0xdf1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high dfl lint[0xe4])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl edge lint[0x35])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl edge lint[0x4b])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x59])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc8c6d000-0xdae8cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdae8d000-0xdaeb6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdaeb7000-0xdb802fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb803000-0xdbafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdbb00000-0xdcffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88021ea00000 s82880 r8192 d31808 u524288
[ 0.000000] pcpu-alloc: s82880 r8192 d31808 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1966078
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=345f6168-2ff7-41fd-bf0e-050d4dd6795d systemd.log_level=debug systemd.log_target=kmsg log_buf_len=1M rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7760140K/7989236K available (5479K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 229096K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:728 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 32505856 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2593.984 MHz processor
[ 0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.13 BogoMIPS (lpj=8646613)
[ 0.000028] pid_max: default: 32768 minimum: 301
[ 0.000032] ACPI: Core revision 20140926
[ 0.020437] ACPI: All ACPI Tables successfully acquired
[ 0.021107] Security Framework initialized
[ 0.021114] Yama: becoming mindful.
[ 0.021531] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.023288] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.024091] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.024099] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.024297] Initializing cgroup subsys memory
[ 0.024302] Initializing cgroup subsys devices
[ 0.024304] Initializing cgroup subsys freezer
[ 0.024305] Initializing cgroup subsys net_cls
[ 0.024307] Initializing cgroup subsys blkio
[ 0.024325] CPU: Physical Processor ID: 0
[ 0.024326] CPU: Processor Core ID: 0
[ 0.024329] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.024329] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.025227] mce: CPU supports 7 MCE banks
[ 0.025238] CPU0: Thermal monitoring enabled (TM1)
[ 0.025247] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.025247] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.025334] Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
[ 0.026009] ftrace: allocating 20921 entries in 82 pages
[ 0.033432] dmar: Host address width 39
[ 0.033434] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.033442] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.033443] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.033447] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.033448] dmar: RMRR base: 0x000000db9ee000 end: 0x000000db9fcfff
[ 0.033449] dmar: RMRR base: 0x000000dd000000 end: 0x000000df1fffff
[ 0.033571] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.033572] HPET id 0 under DRHD base 0xfed91000
[ 0.033573] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.033573] Your BIOS is broken and requested that x2apic be disabled.
[ 0.033573] This will slightly decrease performance.
[ 0.033573] Use 'intremap=no_x2apic_optout' to override BIOS request.
[ 0.033713] Enabled IRQ remapping in xapic mode
[ 0.033713] x2apic not enabled, IRQ remapping is in xapic mode
[ 0.034335] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.067359] smpboot: CPU0: Intel(R) Core(TM) i5-4310U CPU @ 2.00GHz (fam: 06, model: 45, stepping: 01)
[ 0.067366] TSC deadline timer enabled
[ 0.067387] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.067404] ... version: 3
[ 0.067405] ... bit width: 48
[ 0.067406] ... generic registers: 4
[ 0.067407] ... value mask: 0000ffffffffffff
[ 0.067407] ... max period: 0000ffffffffffff
[ 0.067408] ... fixed-purpose events: 3
[ 0.067409] ... event mask: 000000070000000f
[ 0.090846] x86: Booting SMP configuration:
[ 0.090848] .... node #0, CPUs: #1
[ 0.105028] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.111723] #2 #3
[ 0.146545] x86: Booted up 1 node, 4 CPUs
[ 0.146548] smpboot: Total of 4 processors activated (20760.53 BogoMIPS)
[ 0.149839] devtmpfs: initialized
[ 0.151742] PM: Registering ACPI NVS region [mem 0xdaeb7000-0xdb802fff] (9748480 bytes)
[ 0.152488] pinctrl core: initialized pinctrl subsystem
[ 0.152525] RTC time: 14:27:35, date: 01/29/15
[ 0.152613] NET: Registered protocol family 16
[ 0.163220] cpuidle: using governor ladder
[ 0.176565] cpuidle: using governor menu
[ 0.176604] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.176606] ACPI: bus type PCI registered
[ 0.176607] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.176682] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.176684] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.176776] PCI: Using configuration type 1 for base access
[ 0.176783] dmi type 0xB1 record - unknown flag
[ 0.190254] ACPI: Added _OSI(Module Device)
[ 0.190257] ACPI: Added _OSI(Processor Device)
[ 0.190258] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.190259] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.195406] ACPI: Executed 16 blocks of module-level executable AML code
[ 0.527048] ACPI: Dynamic OEM Table Load:
[ 0.527056] ACPI: SSDT 0xFFFF88021322C800 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.540534] ACPI: Dynamic OEM Table Load:
[ 0.540541] ACPI: SSDT 0xFFFF8802131E2000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.553725] ACPI: Dynamic OEM Table Load:
[ 0.553731] ACPI: SSDT 0xFFFF8802131DD200 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.607146] ACPI: Interpreter enabled
[ 0.607157] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
[ 0.607166] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
[ 0.607184] ACPI: (supports S0 S3 S4 S5)
[ 0.607185] ACPI: Using IOAPIC for interrupt routing
[ 0.607218] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.608649] ACPI: Power Resource [PG00] (on)
[ 0.620317] ACPI: Power Resource [PG01] (on)
[ 0.640702] ACPI: Power Resource [PG02] (on)
[ 1.401836] ACPI: Power Resource [FN00] (off)
[ 1.401913] ACPI: Power Resource [FN01] (off)
[ 1.401986] ACPI: Power Resource [FN02] (off)
[ 1.402057] ACPI: Power Resource [FN03] (off)
[ 1.402127] ACPI: Power Resource [FN04] (off)
[ 1.403037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.403043] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 1.403622] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 1.404193] PCI host bridge to bus 0000:00
[ 1.404195] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 1.404196] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.404198] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.404199] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.404200] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
[ 1.404207] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 1.404286] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 1.404296] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 1.404301] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.404305] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 1.404376] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 1.404383] pci 0000:00:03.0: reg 0x10: [mem 0xf7e3c000-0xf7e3ffff 64bit]
[ 1.404461] pci 0000:00:04.0: [8086:0a03] type 00 class 0x118000
[ 1.404471] pci 0000:00:04.0: reg 0x10: [mem 0xf7e30000-0xf7e37fff 64bit]
[ 1.404565] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 1.404580] pci 0000:00:14.0: reg 0x10: [mem 0xf7e20000-0xf7e2ffff 64bit]
[ 1.404631] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 1.404674] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 1.404707] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 1.404725] pci 0000:00:16.0: reg 0x10: [mem 0xf7e46000-0xf7e4601f 64bit]
[ 1.404787] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.404856] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
[ 1.404870] pci 0000:00:19.0: reg 0x10: [mem 0xf7e00000-0xf7e1ffff]
[ 1.404876] pci 0000:00:19.0: reg 0x14: [mem 0xf7e43000-0xf7e43fff]
[ 1.404882] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 1.404937] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 1.445821] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 1.445873] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 1.445892] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e38000-0xf7e3bfff 64bit]
[ 1.445956] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.446016] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 1.446062] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 1.446146] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.446197] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 1.446246] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 1.446328] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.446379] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 1.446423] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
[ 1.446505] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.446555] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 1.446601] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 1.446621] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e42000-0xf7e423ff]
[ 1.446711] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.446770] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1.446812] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 1.446999] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[ 1.447014] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 1.447021] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 1.447027] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 1.447034] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 1.447041] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 1.447048] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e41000-0xf7e417ff]
[ 1.447087] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.447164] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 1.447177] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e40000-0xf7e400ff 64bit]
[ 1.447196] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 1.449196] pci 0000:01:00.0: [1217:8520] type 00 class 0x080501
[ 1.449218] pci 0000:01:00.0: reg 0x10: [mem 0xf7d01000-0xf7d01fff]
[ 1.449231] pci 0000:01:00.0: reg 0x14: [mem 0xf7d00000-0xf7d007ff]
[ 1.449369] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 1.449400] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 1.457648] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.457653] pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.458041] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
[ 1.458129] pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
[ 1.458420] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.458511] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 1.462692] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 1.462697] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 1.462787] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 1.464747] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 1.547152] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.547202] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.547250] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.547296] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.547342] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.547388] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 1.547434] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 1.547480] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.613841] ACPI: Enabled 3 GPEs in block 00 to 7F
[ 1.613905] ACPI : EC: GPE = 0x27, I/O: command/status = 0x934, data = 0x930
[ 1.614013] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 1.614016] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.614019] vgaarb: loaded
[ 1.614020] vgaarb: bridge control possible 0000:00:02.0
[ 1.614099] PCI: Using ACPI for IRQ routing
[ 1.615308] PCI: pci_cache_line_size set to 64 bytes
[ 1.615344] e820: reserve RAM buffer [mem 0x00091400-0x0009ffff]
[ 1.615345] e820: reserve RAM buffer [mem 0xc8c6d000-0xcbffffff]
[ 1.615346] e820: reserve RAM buffer [mem 0x21ee00000-0x21fffffff]
[ 1.615428] NetLabel: Initializing
[ 1.615429] NetLabel: domain hash size = 128
[ 1.615429] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.615438] NetLabel: unlabeled traffic allowed by default
[ 1.615467] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.615471] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.617497] Switched to clocksource hpet
[ 1.621576] pnp: PnP ACPI init
[ 1.621752] system 00:00: [io 0x0680-0x069f] has been reserved
[ 1.621755] system 00:00: [io 0xffff] has been reserved
[ 1.621756] system 00:00: [io 0xffff] has been reserved
[ 1.621758] system 00:00: [io 0xffff] has been reserved
[ 1.621759] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 1.621761] system 00:00: [io 0x164e-0x164f] has been reserved
[ 1.621763] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.621806] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.621837] system 00:02: [io 0x1854-0x1857] has been reserved
[ 1.621839] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.621908] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.621927] pnp 00:04: Plug and Play ACPI device, IDs DLL062c PNP0f13 (active)
[ 1.774372] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (disabled)
[ 1.774526] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.774529] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.774530] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.774532] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.774534] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.774536] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.774538] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 1.774539] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.774541] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 1.774543] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.774545] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 1.774547] system 00:06: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[ 1.774549] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.774927] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.001167] pnp: PnP ACPI: found 8 devices
[ 2.007535] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 2.007540] pci 0000:00:1c.0: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 2.007546] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 2.007549] pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 2.007555] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 2.007564] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 2.007566] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 2.007567] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.007568] pci_bus 0000:00: resource 7 [mem 0xdf200000-0xfeafffff]
[ 2.007570] pci_bus 0000:01: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 2.007571] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 2.007594] NET: Registered protocol family 2
[ 2.007754] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 2.007894] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.008082] TCP: Hash tables configured (established 65536 bind 65536)
[ 2.008100] TCP: reno registered
[ 2.008108] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 2.008140] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 2.008195] NET: Registered protocol family 1
[ 2.008208] pci 0000:00:02.0: Video device with shadowed ROM
[ 2.024532] PCI: CLS 64 bytes, default 64
[ 2.024577] Unpacking initramfs...
[ 2.341540] Freeing initrd memory: 22696K (ffff88003539c000 - ffff8800369c6000)
[ 2.341564] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.341567] software IO TLB [mem 0xc4c6d000-0xc8c6d000] (64MB) mapped at [ffff8800c4c6d000-ffff8800c8c6cfff]
[ 2.341712] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 2.341757] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
[ 2.341762] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
[ 2.341766] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
[ 2.341771] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
[ 2.341822] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 2.341843] Scanning for low memory corruption every 60 seconds
[ 2.342043] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 2.342061] Initialise system trusted keyring
[ 2.342314] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.343277] zpool: loaded
[ 2.343280] zbud: loaded
[ 2.343434] VFS: Disk quotas dquot_6.5.2
[ 2.343457] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.343557] msgmni has been set to 15200
[ 2.343599] Key type big_key registered
[ 2.343749] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.343779] io scheduler noop registered
[ 2.343781] io scheduler deadline registered
[ 2.343802] io scheduler cfq registered (default)
[ 2.343967] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
[ 2.344096] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 2.344214] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 2.344282] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 2.344283] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 2.344286] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 2.344296] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 2.344297] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 2.344300] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 2.344310] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 2.344312] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 2.344325] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.344337] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.344362] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 2.344363] vesafb: scrolling: redraw
[ 2.344364] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.344382] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004f80000, using 8128k, total 8128k
[ 2.492136] Console: switching to colour frame buffer device 240x67
[ 2.639261] fb0: VESA VGA frame buffer device
[ 2.639278] intel_idle: MWAIT substates: 0x11142120
[ 2.639279] intel_idle: v0.4 model 0x45
[ 2.639280] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.639471] GHES: HEST is not enabled!
[ 2.639520] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.639854] Linux agpgart interface v0.103
[ 2.639890] rtc_cmos 00:01: RTC can wake from S4
[ 2.640003] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 2.640027] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.640037] Intel P-state driver initializing.
[ 2.640149] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.640415] TCP: cubic registered
[ 2.640635] NET: Registered protocol family 10
[ 2.641104] NET: Registered protocol family 17
[ 2.641809] Loading compiled-in X.509 certificates
[ 2.641841] registered taskstats version 1
[ 2.642839] Magic number: 15:558:486
[ 2.642991] rtc_cmos 00:01: setting system clock to 2015-01-29 14:27:38 UTC (1422541658)
[ 2.643157] PM: Hibernation image not present or could not be loaded.
[ 2.645133] Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
[ 2.645137] Write protecting the kernel read-only data: 8192k
[ 2.649298] Freeing unused kernel memory: 652K (ffff88000155d000 - ffff880001600000)
[ 2.651088] Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
[ 2.656604] random: systemd-tmpfile urandom read with 6 bits of entropy available
[ 2.656683] systemd-tmpfiles[60]: /dev/mapper created successfully.
[ 2.656691] systemd-tmpfiles[60]: /dev/fuse created successfully.
[ 2.656696] systemd-tmpfiles[60]: /dev/mapper/control created successfully.
[ 2.656700] systemd-tmpfiles[60]: /dev/loop-control created successfully.
[ 2.656704] systemd-tmpfiles[60]: /dev/cuse created successfully.
[ 2.656707] systemd-tmpfiles[60]: /dev/btrfs-control created successfully.
[ 2.657455] systemd-udevd[61]: starting version 218
[ 2.657462] systemd-udevd[61]: hwdb.bin does not exist, please run udevadm hwdb --update
[ 2.657510] systemd-udevd[61]: Load module index
[ 2.657562] systemd-udevd[61]: Created link configuration context.
[ 2.657568] systemd-udevd[61]: timestamp of '/usr/lib/udev/rules.d' changed
[ 2.657608] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/10-dm.rules
[ 2.657685] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/11-dm-initramfs.rules
[ 2.657695] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/11-dm-lvm.rules
[ 2.657733] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/13-dm-disk.rules
[ 2.657763] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/50-udev-default.rules
[ 2.657871] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/60-persistent-storage.rules
[ 2.657981] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/64-btrfs.rules
[ 2.657999] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/69-dm-lvm-metad.rules
[ 2.658057] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/80-drivers.rules
[ 2.658080] systemd-udevd[61]: Reading rules file: /usr/lib/udev/rules.d/95-dm-notify.rules
[ 2.658089] systemd-udevd[61]: rules contain 24576 bytes tokens (2048 * 12 bytes), 4834 bytes strings
[ 2.658091] systemd-udevd[61]: 641 strings (8077 bytes), 378 de-duplicated (3507 bytes), 264 trie nodes used
[ 2.658106] systemd-udevd[61]: chmod '/dev/fuse' 0666
[ 2.658188] systemd-udevd[61]: Unload module index
[ 2.658212] systemd-udevd[61]: Unloaded link configuration context.
[ 2.658262] systemd-udevd[62]: set children_max to 16
[ 2.660408] systemd-udevd[62]: seq 678 queued, 'add' 'module'
[ 2.660490] systemd-udevd[62]: seq 678 forked new worker [67]
[ 2.660575] systemd-udevd[67]: seq 678 running
[ 2.660618] systemd-udevd[67]: no db file to read /run/udev/data/+module:raid6_pq: No such file or directory
[ 2.660644] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 2.660651] systemd-udevd[67]: seq 678 processed with 0
[ 2.714860] raid6: sse2x1 9342 MB/s
[ 2.771561] raid6: sse2x2 11848 MB/s
[ 2.828260] raid6: sse2x4 13887 MB/s
[ 2.884943] raid6: avx2x1 18356 MB/s
[ 2.941655] raid6: avx2x2 21230 MB/s
[ 2.998344] raid6: avx2x4 24583 MB/s
[ 2.998345] raid6: using algorithm avx2x4 (24583 MB/s)
[ 2.998346] raid6: using avx2x2 recovery algorithm
[ 2.998547] xor: automatically using best checksumming function:
[ 2.998570] systemd-udevd[62]: seq 679 queued, 'add' 'module'
[ 2.998603] systemd-udevd[62]: passed 124 bytes to netlink monitor 0x7f4fb497f0d0
[ 2.998639] systemd-udevd[67]: seq 679 running
[ 2.998659] systemd-udevd[67]: no db file to read /run/udev/data/+module:xor: No such file or directory
[ 2.998678] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 2.998684] systemd-udevd[67]: seq 679 processed with 0
[ 3.031698] avx : 25444.800 MB/sec
[ 3.034144] systemd-udevd[62]: Validate module index
[ 3.034177] systemd-udevd[62]: Check if link configuration needs reloading.
[ 3.034204] systemd-udevd[62]: seq 680 queued, 'add' 'module'
[ 3.034228] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.034249] systemd-udevd[67]: seq 680 running
[ 3.034275] systemd-udevd[67]: no db file to read /run/udev/data/+module:btrfs: No such file or directory
[ 3.034299] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.034308] systemd-udevd[67]: seq 680 processed with 0
[ 3.034899] systemd-udevd[62]: seq 681 queued, 'add' 'module'
[ 3.034927] systemd-udevd[62]: passed 133 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.034945] systemd-udevd[67]: seq 681 running
[ 3.034964] systemd-udevd[67]: no db file to read /run/udev/data/+module:crc32c_intel: No such file or directory
[ 3.034979] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.034986] systemd-udevd[67]: seq 681 processed with 0
[ 3.035051] systemd-udevd[62]: seq 682 queued, 'add' 'module'
[ 3.035070] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.035087] systemd-udevd[67]: seq 682 running
[ 3.035101] systemd-udevd[67]: no db file to read /run/udev/data/+module:crc32c_generic: No such file or directory
[ 3.035113] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.035118] systemd-udevd[67]: seq 682 processed with 0
[ 3.035756] systemd-udevd[62]: seq 683 queued, 'add' 'slab'
[ 3.035776] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.035790] systemd-udevd[67]: seq 683 running
[ 3.035795] systemd-udevd[62]: seq 684 queued, 'add' 'slab'
[ 3.035810] systemd-udevd[67]: no db file to read /run/udev/data/+slab:btrfs_inode: No such file or directory
[ 3.035830] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.035834] systemd-udevd[67]: seq 683 processed with 0
[ 3.035903] systemd-udevd[62]: seq 684 forked new worker [75]
[ 3.035934] systemd-udevd[62]: seq 685 queued, 'add' 'slab'
[ 3.035948] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.035961] systemd-udevd[67]: seq 685 running
[ 3.035968] systemd-udevd[62]: seq 686 queued, 'add' 'slab'
[ 3.035981] systemd-udevd[67]: no db file to read /run/udev/data/+slab::at-0000144: No such file or directory
[ 3.035981] systemd-udevd[75]: seq 684 running
[ 3.035999] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.036004] systemd-udevd[67]: seq 685 processed with 0
[ 3.036010] systemd-udevd[75]: no db file to read /run/udev/data/+slab::at-0000176: No such file or directory
[ 3.036027] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
[ 3.036031] systemd-udevd[75]: seq 684 processed with 0
[ 3.036065] systemd-udevd[62]: seq 686 forked new worker [76]
[ 3.036107] systemd-udevd[62]: seq 687 queued, 'add' 'slab'
[ 3.036128] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.036146] systemd-udevd[62]: seq 688 queued, 'add' 'slab'
[ 3.036165] systemd-udevd[76]: seq 686 running
[ 3.036166] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.036180] systemd-udevd[75]: seq 688 running
[ 3.036182] systemd-udevd[62]: seq 689 queued, 'add' 'slab'
[ 3.036199] systemd-udevd[75]: no db file to read /run/udev/data/+slab::at-0000088: No such file or directory
[ 3.036206] systemd-udevd[76]: no db file to read /run/udev/data/+slab::at-0000064: No such file or directory
[ 3.036212] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
[ 3.036215] systemd-udevd[75]: seq 688 processed with 0
[ 3.036227] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
[ 3.036231] systemd-udevd[76]: seq 686 processed with 0
[ 3.036257] Btrfs loaded
[ 3.036289] systemd-udevd[62]: seq 689 forked new worker [77]
[ 3.036329] systemd-udevd[62]: seq 690 queued, 'add' 'slab'
[ 3.036351] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.036370] systemd-udevd[62]: seq 691 queued, 'add' 'slab'
[ 3.036378] systemd-udevd[77]: seq 689 running
[ 3.036390] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.036407] systemd-udevd[62]: seq 692 queued, 'add' 'slab'
[ 3.036413] systemd-udevd[77]: no db file to read /run/udev/data/+slab::at-0000280: No such file or directory
[ 3.036434] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
[ 3.036439] systemd-udevd[77]: seq 689 processed with 0
[ 3.036457] systemd-udevd[76]: seq 691 running
[ 3.036474] systemd-udevd[76]: no db file to read /run/udev/data/+slab::at-0000304: No such file or directory
[ 3.036493] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
[ 3.036498] systemd-udevd[76]: seq 691 processed with 0
[ 3.036513] systemd-udevd[62]: seq 692 forked new worker [78]
[ 3.036548] systemd-udevd[62]: seq 693 queued, 'add' 'slab'
[ 3.036563] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.036576] systemd-udevd[76]: seq 693 running
[ 3.036579] systemd-udevd[62]: seq 694 queued, 'add' 'slab'
[ 3.036596] systemd-udevd[76]: no db file to read /run/udev/data/+slab::at-0000096: No such file or directory
[ 3.036597] systemd-udevd[62]: passed 135 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.036615] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
[ 3.036616] systemd-udevd[62]: seq 695 queued, 'add' 'slab'
[ 3.036619] systemd-udevd[76]: seq 693 processed with 0
[ 3.036637] systemd-udevd[77]: seq 694 running
[ 3.036649] systemd-udevd[78]: seq 692 running
[ 3.036655] systemd-udevd[77]: no db file to read /run/udev/data/+slab::at-0000040: No such file or directory
[ 3.036672] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
[ 3.036676] systemd-udevd[77]: seq 694 processed with 0
[ 3.036678] systemd-udevd[78]: no db file to read /run/udev/data/+slab::at-0000160: No such file or directory
[ 3.036694] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
[ 3.036698] systemd-udevd[78]: seq 692 processed with 0
[ 3.036721] systemd-udevd[62]: seq 695 forked new worker [80]
[ 3.036773] systemd-udevd[62]: seq 696 queued, 'add' 'misc'
[ 3.036801] systemd-udevd[80]: seq 695 running
[ 3.036826] systemd-udevd[80]: no db file to read /run/udev/data/+slab::at-0000080: No such file or directory
[ 3.036832] systemd-udevd[62]: passed 192 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.036843] systemd-udevd[80]: passed -1 bytes to netlink monitor 0x7f4fb49913d0
[ 3.036848] systemd-udevd[80]: seq 695 processed with 0
[ 3.036859] systemd-udevd[76]: seq 696 running
[ 3.036904] systemd-udevd[76]: no db file to read /run/udev/data/c10:234: No such file or directory
[ 3.036916] systemd-udevd[76]: handling device node '/dev/btrfs-control', devnum=c10:234, mode=0600, uid=0, gid=0
[ 3.036922] systemd-udevd[76]: preserve permissions /dev/btrfs-control, 020600, uid=0, gid=0
[ 3.036930] systemd-udevd[76]: creating symlink '/dev/char/10:234' to '../btrfs-control'
[ 3.036959] systemd-udevd[76]: created empty file '/run/udev/data/c10:234' for '/devices/virtual/misc/btrfs-control'
[ 3.036987] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
[ 3.036992] systemd-udevd[76]: seq 696 processed with 0
[ 3.037009] systemd-udevd[67]: seq 687 running
[ 3.037027] systemd-udevd[67]: no db file to read /run/udev/data/+slab::at-0000152: No such file or directory
[ 3.037044] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.037048] systemd-udevd[67]: seq 687 processed with 0
[ 3.037063] systemd-udevd[75]: seq 690 running
[ 3.037079] systemd-udevd[75]: no db file to read /run/udev/data/+slab::at-0000424: No such file or directory
[ 3.037093] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
[ 3.037097] systemd-udevd[75]: seq 690 processed with 0
[ 3.037372] udevadm[79]: calling: trigger
[ 3.037397] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/vt'
[ 3.037403] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/xor'
[ 3.037408] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/8250'
[ 3.037412] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/tcp_cubic'
[ 3.037417] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/acpi'
[ 3.037421] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/ipv6'
[ 3.037425] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/cpuidle'
[ 3.037428] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/rcutree'
[ 3.037432] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/block'
[ 3.037436] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/btrfs'
[ 3.037440] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/sysrq'
[ 3.037444] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/zswap'
[ 3.037448] udevadm[79]: device 0x7fbf103cd230 has devpath '/module/crc32c_generic'
[ 3.037453] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/firmware_class'
[ 3.037457] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/workqueue'
[ 3.037461] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/crc32c_intel'
[ 3.037465] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/spurious'
[ 3.037469] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/raid6_pq'
[ 3.037473] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/configfs'
[ 3.037477] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/netpoll'
[ 3.037481] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pci_slot'
[ 3.037486] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/kernel'
[ 3.037490] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/acpiphp'
[ 3.037494] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pciehp'
[ 3.037498] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/printk'
[ 3.037502] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pstore'
[ 3.037507] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/dynamic_debug'
[ 3.037511] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/xz_dec'
[ 3.037515] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pcie_aspm'
[ 3.037522] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/rcupdate'
[ 3.037526] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/intel_idle'
[ 3.037530] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/keyboard'
[ 3.037534] udevadm[79]: device 0x7fbf103cd500 has devpath '/module/pci_hotplug'
[ 3.037548] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/cpu'
[ 3.037552] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci'
[ 3.037556] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp'
[ 3.037559] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/spi'
[ 3.037563] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/xen'
[ 3.037567] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi'
[ 3.037571] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/node'
[ 3.037575] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/clocksource'
[ 3.037579] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/machinecheck'
[ 3.037583] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/event_source'
[ 3.037587] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/workqueue'
[ 3.037591] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/container'
[ 3.037595] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/memory'
[ 3.037599] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express'
[ 3.037603] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform'
[ 3.037607] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/clockevents'
[ 3.037611] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/xen-backend'
[ 3.037628] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/xen-platform-pci'
[ 3.037633] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/pcieport'
[ 3.037638] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/ioapic'
[ 3.037642] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci/drivers/serial'
[ 3.037653] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp/drivers/rtc_cmos'
[ 3.037658] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp/drivers/serial'
[ 3.037662] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pnp/drivers/system'
[ 3.037675] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/ec'
[ 3.037680] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/hpet'
[ 3.037685] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/intel_smart_connect'
[ 3.037691] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/acpi/drivers/hardware_error_device'
[ 3.037716] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express/drivers/aer'
[ 3.037721] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express/drivers/pcie_pme'
[ 3.037726] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/pci_express/drivers/pciehp'
[ 3.037735] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/alarmtimer'
[ 3.037739] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/efi-framebuffer'
[ 3.037744] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/vesa-framebuffer'
[ 3.037748] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/serial8250'
[ 3.037753] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/syscon'
[ 3.037760] udevadm[79]: device 0x7fbf103cd500 has devpath '/bus/platform/drivers/clk-lpt'
[ 3.037842] systemd-udevd[62]: seq 697 queued, 'add' 'bus'
[ 3.037860] systemd-udevd[62]: passed 119 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.037890] systemd-udevd[67]: seq 697 running
[ 3.037891] systemd-udevd[62]: seq 698 queued, 'add' 'drivers'
[ 3.037906] systemd-udevd[62]: seq 699 queued, 'add' 'drivers'
[ 3.037909] systemd-udevd[67]: no db file to read /run/udev/data/+bus:acpi: No such file or directory
[ 3.037921] systemd-udevd[62]: seq 700 queued, 'add' 'drivers'
[ 3.037923] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.037925] systemd-udevd[67]: seq 697 processed with 0
[ 3.037941] systemd-udevd[62]: seq 701 queued, 'add' 'drivers'
[ 3.037963] systemd-udevd[62]: passed 134 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.037985] systemd-udevd[62]: passed 153 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.037988] systemd-udevd[67]: seq 698 running
[ 3.037999] systemd-udevd[62]: passed 136 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038001] systemd-udevd[67]: no db file to read /run/udev/data/+drivers:ec: No such file or directory
[ 3.038011] systemd-udevd[62]: passed 151 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038013] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.038015] systemd-udevd[67]: seq 698 processed with 0
[ 3.038031] systemd-udevd[62]: seq 702 queued, 'add' 'bus'
[ 3.038053] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038076] systemd-udevd[67]: seq 702 running
[ 3.038079] systemd-udevd[62]: seq 703 queued, 'add' 'bus'
[ 3.038088] systemd-udevd[67]: no db file to read /run/udev/data/+bus:clockevents: No such file or directory
[ 3.038094] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038102] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.038106] systemd-udevd[67]: seq 702 processed with 0
[ 3.038111] systemd-udevd[62]: seq 704 queued, 'add' 'bus'
[ 3.038113] systemd-udevd[78]: seq 703 running
[ 3.038126] systemd-udevd[62]: passed 124 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038134] systemd-udevd[78]: no db file to read /run/udev/data/+bus:clocksource: No such file or directory
[ 3.038143] systemd-udevd[80]: seq 704 running
[ 3.038145] systemd-udevd[62]: seq 705 queued, 'add' 'bus'
[ 3.038152] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
[ 3.038156] systemd-udevd[62]: passed 118 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038158] systemd-udevd[78]: seq 703 processed with 0
[ 3.038163] systemd-udevd[80]: no db file to read /run/udev/data/+bus:container: No such file or directory
[ 3.038175] systemd-udevd[62]: seq 706 queued, 'add' 'bus'
[ 3.038177] systemd-udevd[80]: passed -1 bytes to netlink monitor 0x7f4fb49913d0
[ 3.038179] systemd-udevd[80]: seq 704 processed with 0
[ 3.038188] systemd-udevd[62]: passed 127 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038192] systemd-udevd[67]: seq 705 running
[ 3.038201] systemd-udevd[78]: seq 706 running
[ 3.038206] systemd-udevd[62]: seq 707 queued, 'add' 'bus'
[ 3.038209] systemd-udevd[67]: no db file to read /run/udev/data/+bus:cpu: No such file or directory
[ 3.038218] systemd-udevd[62]: passed 127 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038224] systemd-udevd[78]: no db file to read /run/udev/data/+bus:event_source: No such file or directory
[ 3.038225] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.038228] systemd-udevd[67]: seq 705 processed with 0
[ 3.038234] systemd-udevd[62]: seq 708 queued, 'add' 'bus'
[ 3.038243] systemd-udevd[80]: seq 707 running
[ 3.038243] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
[ 3.038246] systemd-udevd[78]: seq 706 processed with 0
[ 3.038254] systemd-udevd[76]: seq 700 running
[ 3.038261] systemd-udevd[80]: no db file to read /run/udev/data/+bus:machinecheck: No such file or directory
[ 3.038272] systemd-udevd[80]: passed -1 bytes to netlink monitor 0x7f4fb49913d0
[ 3.038275] systemd-udevd[80]: seq 707 processed with 0
[ 3.038276] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:hpet: No such file or directory
[ 3.038306] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
[ 3.038310] systemd-udevd[76]: seq 700 processed with 0
[ 3.038325] systemd-udevd[75]: seq 699 running
[ 3.038343] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:hardware_error_device: No such file or directory
[ 3.038360] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
[ 3.038364] systemd-udevd[75]: seq 699 processed with 0
[ 3.038405] systemd-udevd[77]: seq 701 running
[ 3.038419] systemd-udevd[77]: no db file to read /run/udev/data/+drivers:intel_smart_connect: No such file or directory
[ 3.038429] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
[ 3.038432] systemd-udevd[77]: seq 701 processed with 0
[ 3.038531] systemd-udevd[62]: seq 708 forked new worker [81]
[ 3.038591] systemd-udevd[62]: seq 709 queued, 'add' 'bus'
[ 3.038612] systemd-udevd[62]: passed 119 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038623] systemd-udevd[81]: seq 708 running
[ 3.038627] systemd-udevd[67]: seq 709 running
[ 3.038631] systemd-udevd[62]: seq 710 queued, 'add' 'bus'
[ 3.038640] systemd-udevd[62]: passed 118 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038648] systemd-udevd[67]: no db file to read /run/udev/data/+bus:node: No such file or directory
[ 3.038653] systemd-udevd[75]: seq 710 running
[ 3.038655] systemd-udevd[81]: no db file to read /run/udev/data/+bus:memory: No such file or directory
[ 3.038657] systemd-udevd[62]: seq 711 queued, 'add' 'drivers'
[ 3.038666] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.038671] systemd-udevd[62]: seq 712 queued, 'add' 'drivers'
[ 3.038671] systemd-udevd[67]: seq 709 processed with 0
[ 3.038676] systemd-udevd[81]: passed -1 bytes to netlink monitor 0x7f4fb49945b0
[ 3.038678] systemd-udevd[75]: no db file to read /run/udev/data/+bus:pci: No such file or directory
[ 3.038682] systemd-udevd[81]: seq 708 processed with 0
[ 3.038693] systemd-udevd[62]: seq 713 queued, 'add' 'drivers'
[ 3.038695] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
[ 3.038700] systemd-udevd[75]: seq 710 processed with 0
[ 3.038710] systemd-udevd[62]: seq 714 queued, 'add' 'drivers'
[ 3.038721] systemd-udevd[62]: passed 137 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038732] systemd-udevd[62]: passed 139 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038734] systemd-udevd[67]: seq 711 running
[ 3.038753] systemd-udevd[76]: seq 713 running
[ 3.038753] systemd-udevd[67]: no db file to read /run/udev/data/+drivers:ioapic: No such file or directory
[ 3.038779] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.038782] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:serial: No such file or directory
[ 3.038784] systemd-udevd[67]: seq 711 processed with 0
[ 3.038797] systemd-udevd[75]: seq 712 running
[ 3.038799] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
[ 3.038803] systemd-udevd[76]: seq 713 processed with 0
[ 3.038810] systemd-udevd[62]: passed 137 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038815] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:pcieport: No such file or directory
[ 3.038823] systemd-udevd[62]: passed 147 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038841] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
[ 3.038845] systemd-udevd[75]: seq 712 processed with 0
[ 3.038849] systemd-udevd[77]: seq 714 running
[ 3.038856] systemd-udevd[62]: seq 715 queued, 'add' 'bus'
[ 3.038864] systemd-udevd[77]: no db file to read /run/udev/data/+drivers:xen-platform-pci: No such file or directory
[ 3.038871] systemd-udevd[62]: passed 126 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038876] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
[ 3.038878] systemd-udevd[77]: seq 714 processed with 0
[ 3.038891] systemd-udevd[62]: seq 716 queued, 'add' 'drivers'
[ 3.038915] systemd-udevd[62]: seq 717 queued, 'add' 'drivers'
[ 3.038928] systemd-udevd[62]: seq 718 queued, 'add' 'drivers'
[ 3.038941] systemd-udevd[62]: seq 719 queued, 'add' 'bus'
[ 3.038953] systemd-udevd[62]: passed 123 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.038976] systemd-udevd[75]: seq 719 running
[ 3.038977] systemd-udevd[62]: seq 720 queued, 'add' 'drivers'
[ 3.038990] systemd-udevd[75]: no db file to read /run/udev/data/+bus:platform: No such file or directory
[ 3.038991] systemd-udevd[62]: seq 721 queued, 'add' 'drivers'
[ 3.039001] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
[ 3.039004] systemd-udevd[75]: seq 719 processed with 0
[ 3.039005] systemd-udevd[62]: seq 722 queued, 'add' 'drivers'
[ 3.039034] systemd-udevd[62]: seq 723 queued, 'add' 'drivers'
[ 3.039046] systemd-udevd[62]: passed 146 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.039070] systemd-udevd[75]: seq 720 running
[ 3.039078] systemd-udevd[76]: seq 721 running
[ 3.039081] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:alarmtimer: No such file or directory
[ 3.039092] systemd-udevd[75]: passed -1 bytes to netlink monitor 0x7f4fb49879e0
[ 3.039094] systemd-udevd[75]: seq 720 processed with 0
[ 3.039101] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:clk-lpt: No such file or directory
[ 3.039128] systemd-udevd[76]: passed -1 bytes to netlink monitor 0x7f4fb49883b0
[ 3.039133] systemd-udevd[76]: seq 721 processed with 0
[ 3.039146] systemd-udevd[67]: seq 715 running
[ 3.039162] systemd-udevd[67]: no db file to read /run/udev/data/+bus:pci_express: No such file or directory
[ 3.039177] systemd-udevd[67]: passed -1 bytes to netlink monitor 0x7f4fb498c310
[ 3.039181] systemd-udevd[67]: seq 715 processed with 0
[ 3.039188] systemd-udevd[62]: passed 143 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.039200] systemd-udevd[62]: passed 151 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.039221] systemd-udevd[62]: passed 146 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.039224] systemd-udevd[77]: seq 722 running
[ 3.039235] systemd-udevd[78]: seq 723 running
[ 3.039244] systemd-udevd[77]: no db file to read /run/udev/data/+drivers:efi-framebuffer: No such file or directory
[ 3.039244] systemd-udevd[62]: seq 724 queued, 'add' 'drivers'
[ 3.039255] systemd-udevd[78]: no db file to read /run/udev/data/+drivers:serial8250: No such file or directory
[ 3.039257] systemd-udevd[62]: passed 142 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.039263] systemd-udevd[77]: passed -1 bytes to netlink monitor 0x7f4fb498a250
[ 3.039267] systemd-udevd[77]: seq 722 processed with 0
[ 3.039269] systemd-udevd[62]: passed 147 bytes to netlink monitor 0x7f4fb497f0d0
[ 3.039273] systemd-udevd[78]: passed -1 bytes to netlink monitor 0x7f4fb498f600
[ 3.039277] systemd-udevd[78]: seq 723 processed with 0
[ 3.039284] systemd-udevd[75]: seq 717 running
[ 3.039288] systemd-udevd[76]: seq 718 running
[ 3.039298] systemd-udevd[75]: no db file to read /run/udev/data/+drivers:pcie_pme: No such file or directory
[ 3.039306] systemd-udevd[76]: no db file to read /run/udev/data/+drivers:pciehp: No such file or directory
[ 3.039309] sysGuys, I think I've found the strange thing.
First, in the recovery shell, when I type "lvm lvscan", it prints:
WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
and then it says that all four my logical volumes root,boot,home and var are inactive.
So I tried to set them up manually, with "lvm vgchange -a y", and guess what happened: I was able to boot!
I still haven't managed to understand the real causes of this problem, but basically it seems that I have the same problem explained here: https://bbs.archlinux.org/viewtopic.php?id=184340.
The only difference is that there the OP says to have solved the problem with an upgrade to Linux 3.15.7, while it appeared to me with the upgrade to 3.18.3, and as I said it doesn't go away neither with a downgrade nor with another upgrade to version 3.18.4
Last edited by rdm (2015-01-29 21:55:44) -
HP ENVY 4501 e-All-in-One: Unable to Find Printer
I just recently got a HP ENVY 4501 e-All-in-One. The printer is connected wirelessly to my router but after I installed the software, it was unable to find the printer. I have tried it on 3 different computers. 2 with Windows 7 and the other with Windows Vista. How can I get the computers to find the printer? Also, can a Linux system also use the printer?
Thanks.Hi blanchard10,
Welcome to the HP Forums.
I see that you are having some installation issues.
Just so you are aware, no Linux driver is available for this printer at this time.
I do have a few steps that we can try in the attempt to install the printer on to your Windows 7 and Vista computers.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Seeing that you are attempting to install the printer with a wireless connection, we do need to have the software and drivers installed on to each computer.
Here is the HP ENVY 4500 e-All-in-One Printer series Full Feature Software and Drivers.
Please make sure that you do NOT have any firewalls or anti virus protection running while doing the installation.
Save the download to the Desktop of the computers so that it creates its own icon. This will make it easy to find the download when it is completed on each computer. Double click the new icon and follow the installation instructions. The installation will give you connection options. Select wireless.
On the front panel of the printer, we will need to go through the Wireless Setup Wizard. To get to the Wizard we will need to be on the main display of the printer and touch the Wireless icon on the top of the printer window. Select Settings and then select the Wireless Setup Wizard and follow the instructions to connect to the network. You will need the IP address once the printer is connected to add to each computer when prompted to do so.
Please write me back if you are still having issues or if you have any other questions.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
Macbook 4,1
Early 2008 15" macbook pro
Running Snow Leopard
the Battery was not working after only 23 cycles
I tried the Battery update and now it will not boot at all
I really do not want to loose my data on the drive
panic message is
Unable to find driver for this platform: "ACPI".\n"@/SourceCache/xnu/xnu-1228/iokit/Kernel/IOPlatformExpert.cpp:1378
Please helpPanic Message
panic(cpu 0 caller 0x000x563ebd) : Unable to find driver for this platform:
"ACPI".\n"@/SourceCache/xnu/xnu-1228/iokit/Kernel/IOPlatformExpert.cpp:1378
Debugger called: <panic>
Backtrace (CPU 0), Format - Frame : Return Address (4 potential args on stack)
(7 lines of hex)
BSD Process name corresponding to current thread: Unkonwn
Kernel version:
Darwin Kernel Version 10.8.0" todays date ; root:xnu-1504.15.3~1/release_I386
I tried to boot from CD can, but i dont want to loose any information.
Tried disk tools
Hardware test
Tried to check if it was memory sticks failing or battery , nothing else plugged in
if i boot holding Apple key and S
I get additional warnings about AppleACPIPlatform and not being able to load Kext -
Error ERR-1002 Unable to find item ID for item "" in application
Hello.
I have same problem like at guy from last message of this thread Error ERR-1002 Unable to find item ID for item "" in application "11501".
I have apex 4.2.1.00.08
Occasionally address box contains comma (f?p=102:LOGIN_DESKTOP:::::,). This bug do not have a logic, just occured.
Could somebody help me?This select
select * from apex_workspace_activity_log t
where t.error_message like '%ERR-1002%'
returns about 40 rows. 1-3 for every day. Mb somebody know about this bug ? -
Bug Report APEX 4.2(.1) : Unable to find item ID for item "P3500_RELEASE"
1. On the Home Page, click the "Settings" wheel in the header of the Team Development region on the right side.
2. On the Home Page Preferences popup set "Show" to something else as "All" and click [Apply Changes]
3. Back on the Home Page, in the Team Development region on the right side, click the number next to "Bugs"
4. ERR-1002 Unable to find item ID for item "P3500_RELEASE" in application "4800".Patrick -
I decided to drop back and implement the demo to change the email address on my EBS login per the 2015 white paper.
Something is definitely wrong here..
The FND: APEX URL Profile option is set to: http://appstest4.fubar.com:7001/ords
The Function to call the pag is set toe: GWY.jsp?targetAppType=APEX&p=110:1:::::EBS_RESP_ID, EBS_APP_ID,EBS_SEC_GROUP:[RESPONSIBILITY_ID],[RESP_APPL_ID],[SECURITY_GROUP_ID]
When I call the page though, the URL is http://appstest4.fubar.com:7001/ords/f?p=110:LOGIN_DESKTOP::::::
Is is possible the jsp is not the correct one? -
Am unable to find my network in my new office with my powerbook G4
I have moved into a new office and am unable to find our new network on oir Powerbook G4. However, I also have a MacBook Pro and this can not only pick up the network but also has a very strong signal
I have NEVER had a problem finding a signal with this laptop
Is there an issue with the PowerBook G4 finding network signals at all???
BillytheBeeDoes the machine have an airport address inside the battery bay?
Did you ever use wireless with the machine before?
Is the wireless network setup for 802.11g and/or 802.11n only?
Maybe you are looking for
-
The list of open web pages, which normally sits bottom right on my screen, flipped to the left. How can I move it back to the right? I clicked Alt + tab and saw 'Deplacer' (Reposition - I'm in France). Then the cursor became a thing like a crossroads
-
Teacher looking for solution to generating a document linked to class roster.
I'm looking for an electronic version of the label. I want to create a document (like a worksheet) that has fields for Name, Hour, Date at the top. Then, I'd like the PDF to generate a worksheet per student on my roster, automatically filling in th
-
Cannot view virtual service from host
Hi, Apologies for posting this here, I could not find a more appropriate forum and I am desperate and this is the nearest fit. I have an Oracle VirtualBox which is running various web services for BI - see => SmartView: Cannot Connect to Provider for
-
Safari 4 tabs do not display unread counts for GMail and Google Reader
To reproduce this, do the following: 1. Create a bookmark for either GMail or Google Reader 2. Click on the bookmark under Safari to load either site (make sure it has at least on unread item) The text in the tab title will not display the unread cou
-
[Sorry for the last post with incomplete title] Hello everyone I am writing a program in Java that analyzes color patches from a colorimeter. Unfortunately, I am not quite sure how to use the related Java routines. That is, to read in the measuered d