Unable to find an entry point named 'OpsPrmAllocValCtx' in DLL 'OraOps10.dl

.NET 2 (c#) Standalone application is failed to run on clean computer with subj
application compiled on VisualStudio 2005
installed Software:
.NET 2 redistribution
ODAC10202Beta.exe
The same application built with VS 2003 .NET 1 and installed ODAC101040.exe
works fine.
Thanks for any advice.

I tried the suggestion above using the MS GAC tool and I still have the problem so I am looking for any other suggestions or thoughts as to what could be wrong:
gacutil.exe /i "C:\Oracle\oracle\product\10.2.0\client_1\odp.net\PublisherPolicy\1.x\Policy.9.2.Oracle.DataAccess.dll"
gacutil.exe /i "C:\Oracle\oracle\product\10.2.0\client_1\odp.net\PublisherPolicy\1.x\Policy.10.1.Oracle.DataAccess.dll"
gacutil.exe /i "C:\Oracle\oracle\product\10.2.0\client_1\odp.net\PublisherPolicy\1.x\Policy.10.2.Oracle.DataAccess.dll"
gacutil.exe /i "C:\Oracle\oracle\product\10.2.0\client_1\odp.net\bin\1.x\Oracle.DataAccess.dll"
gacutil.exe /i "C:\Oracle\oracle\product\10.2.0\client_1\odp.net\bin\2.x\Oracle.DataAccess.dll"
I used gacutil.exe out of "C:\Program Files\Microsoft SDKs\Windows\v6.0A\bin" and each insert said it was successful.
The specific error I am getting in VS2008 with SP1 is: _getContextXml:Unable to find an entry point named 'OpsPrmAllocValCtx' in DLL 'OraOps10.dll' in a .NET 2.x project.
I used dependency walker and looked at both OraOps10.dll (version 1.102.2.20) and OraOps10w.dll (version 2.102.2.20) and the function OpsPrmAllocValCtx isn't in either one of them. I looked at other users machines who aren't having this problem and they have the same Oracle DLLs from the same install that I do too so I am scratching my head trying to figure out what is wrong here and would appreciate any help - and thanks in advance.

Similar Messages

  • ERROR "Unable to find an entry point named OCIEnvCreate in DLL"

    Hi, I´am developing an ASP.net app, I have worked with asp.net and oracle before, but in this time im getting this error: "Unable to find an entry point named OCIEnvCreate in DLL" the oracle91 folder has read priveleges, I have installed ODP.net, and I keep getting this error, what can I do. Im using framework 1.1. thxs

    The "Authenticated Users" group should have "Read & Execute" on the %ORACLE_HOME% folder and below. Can you verify if this is the case?
    - Mark
    ===================================================
    Mark A. Williams
    Oracle DBA
    Author, Professional .NET Oracle Programming
    http://www.apress.com/book/bookDisplay.html?bID=378

  • Unable to find an entry point named 'imaqCreat​eImage' in DLL ...

    Firstly some background:
    Using Microsoft's managed extensibility framework (MEF), I've created a "Test Tool" framework which accepts plugins. The plugins are generally HW drivers with UIs. I created a NI Vision plugin  which does camera discovery, acquisition and image processing. All functionality is exposed via a UI and public methods. The  "Test Tool" framework shows the plugin UIs in docking panels (same VS docking panels) and provides a scripting interface for the plugin's public methods. 
    Ok, now the problem:
    At runtime for the "Test Tool" framework and plugin I get "Unable to find an entry point named 'imaqCreateImage' in DLL ...". After a quick debug: the exception is thrown when instantiating the Imageviewer control in NI Vision plugin UI.
    I created a plugin test environment which simply references the plugin and adds the plugin's UI to a form. This works correctly at runtime.
    In addition, if I remove the  Imageviewer controls from the plugin, it works correctly at runtime in the "Test Tool" framework.

    Have you tried ensuring that the DLL function is actually being exported? You might check out some other forums as this problem has more to do with calling our DLL than the DLL its self. I've found a few other instances of this issue on external forums but I couldn't find any internal resources as you're doing something outside the scope of the intended functionality.
    http://stackoverflow.com/questions/653178/unable-t​o-find-an-entry-point-named-function-in-dll-c-to-c​...
    http://stackoverflow.com/questions/13882304/unable​-to-find-an-entry-point-named
    Rob B
    FlexRIO Product Manager

  • I just update itunes for latest version. Now I can't open it on win 7- 64 bits. I get an erro: Cant find the entry point of the procudere sqlite_wal_checkpoint.. Windows error 127.. help!!!

    I just update itunes for latest version. Now I can't open it on windows 7- 64 bits. I get an erro: Cant find the entry point of the procudere sqlite_wal_checkpoint.. Windows error 127. What can I do...???

    How did you fix this?

  • Help me in finding the entry points in the source code of java.....

    hi...
    I want to design a compilation server and apply some of the optimization technique's like inlining, SSA and others.
    So i require to find the entry points in source code from where i can include my code and check the performance of the program at level it is performing .
    Please help in this problem....
    and i also like to know what are hot methods in java context?

    BigDaddyLoveHandles wrote:
    Do you even know Java? Why not just let the HotSpot optimization do its thing?Good point, I would try either of two things.
    If you have a good understanding of Java internals and are confident you could optimise code better, I suggest you contribute to the OpenJDK and we can all benefit.
    Otherwise I suggest you try using the optimisation built into the compiler and the JVM.
    Note: the JVM optimises the code dramatically in ways most normal people won't have thought possible.
    The compiler doesn't optimise the code so much as it leaves this job to the JVM.
    Two examples;
    - say you call a small method often. The JVM can inline this method for you. (the same way a compiler would) However say this method can be over-ridden and later your program calls a different implementation, it can inline both methods even if the new method in a new class didn't exist when the first method was inlined.
    - In a 32-bit JVM, 32-bit registers and references are used. In a 64-bit JVM 64-bit registers and references are used without needing to recompile the code. However there is a third option of using 32-bit references in a 64-bit JVM. In this case, it assumes the bottom 3 bits are always 000 so it shifts the reference down 3 bits allowing you to access 32 GB using 32-bit references. Again, you can use this with libraries which were compiled before 64-bit JVMs were available.

  • Could not find the entry point in the procedure sqlite3_wal_checkpoint sqlite3.dll dynamic link library., Could not find the entry point in the procedure sqlite3_wal_checkpoint sqlite3.dll dynamic link library.

    Could not find the entry point in the procedure sqlite3_wal_checkpoint sqlite3.dll dynamic link library.

    Could not find the entry point in the procedure sqlite3_wal_checkpoint sqlite3.dll dynamic link library.
    Try uninstalling your MobileMe control panel for Windows.

  • Crystal Reports 2008-Vista-ERROR-crw32.exe Entry Point Not Found in dll

    Hi Experts,
    I just installed the Crystal Reports 2008 (with SP0) on my Vista (Home) machine.  When I try to start the CR 2008, I am getting the below error message:
    Error Title: crw32.exe - Entry Point Not Found
    Error Message: The procedure entry point ?PrintLegend@CMapXLegend@CSLib300@@QAEXJJJJJ@Z could not be located in the dynamic link library cslibu-3-0.dll
    Here are the things I tried to resolve the above problem:
    1) Uninstall and Reinstall the CR 2008.  -  No change.
    2) I configured the DEP to accept Crystal Reports (Performance - Advanced - DEP allow). 
    None of these seem fix the problem. 
    Can you please help me kick start the Crystal Reports 2008? 
    Thanks,
    Arun

    Please try with this:
    Run a command prompt as administrator. From the start menu, select "All Programs", then "Accessories" and right-click on the "Command Prompt" shortcut and choose "Run As Administrator". From here you can use the following command to disable Data Execution Prevention (DEP) with the following command:
    bcdedit.exe /set nx AlwaysOff
    Keeping your command prompt open, run your setup or other process being stopped by DEP. Then, to turn it back on again, do the same and run the following:
    bcdedit.exe /set nx AlwaysOn
    Regards,
    Shweta

  • Photoshop.exe - Entry Point Not Found (MSVCP80.dll)?

    Hey guys, new to the board here and pretty much at the end of my rope.
    Starting maybe 2 days ago I began getting quite a strange message when I tried to open Photoshop CS3.
    I'd send a jpeg of the window but with photoshop down i'll settle for just typing this crap out:
    Photoshop.exe - Entry Point Not Found
    The Procedure entry point ?replace@?$basic_string@DU$char_traits@D@std@@V?$a llocator@D@2@@std@@qaeaav12@IIPBD@Z could not be located in the dynamic link library MSVCP80.dll
    Now, that's a mouthful! Fortunately i'm at least computer literate enough to dig around on google.
    After doing that, I came up with nothing. I found a replacement for the DLL that it's having trouble with, but that did nothing.
    I then tried out a program called Registrybooster, which found quite a few problems with my registry but failed to correct whatever is causing this problem.
    So I tried to backtrack a little bit and see if anything I had done since the last time the program worked (wednesday the prior week) had broken it. I had shut off some startup programs so i figured maybe that had something to do with it. Unfortunately undoing those changes had absolutely no effect at all.
    I then tried out doing a repair install, which did nothing. After this, I did an uninstall and reinstall and... nothing.
    Some extra info: I run windows xp home edition on this PC and have it updated to SP3.
    I've had photoshop on it for about a year with no problems.
    Hopefully someone can help me here. Almost every thread I located with similar problems via google either went unanswered or the answers given didn't actually help me out.
    Someone save me!

    Hi Chris, thanks for chiming in on my problem.
    I'm doubtful of it being TWAIN/WIA caused, but will look into it. I have a wacom tablet and a canon scanner so who knows. What would you suggest I do to see if those two are causing anything in particular? (Not sure why they would as I haven't made any changes to the programs or hardware involved recently.)

  • Oracle OLE DB 8.1.7.3 entry point kpcddtasg in oracommon8.dll

    I have encountered a problem while installing Oracle OLE DB provider. I have Oracle 8.1.6 server installed.
    After I installed the software the oracle service failed to start and the following error message was given
    "the proceedure entry point kpcddtasg could not be found in the dynamic link library oracommon8.dll"
    Has A.O. else encounered resolved this problem?
    Henry.

    oh ... I forgot to say ..
    when I run query under Enterprise Manager as
    select * from Openquery (db, 'select * from table')
    then it will show me a pop-up message
    "Query Designer encountered a MS Design Tools error:
    ODBC error: [Microsoft][ODBC SQL Server Driver][SQL Server]OLE DB provider 'OraOLEDB.Oracle' reported an error.
    [Microsoft][ODBC SQL server Driver][SQL Server][OLE/DB provider returned message: ORA-12545: Connect failed because target host or object does not exist]
    And I follow support.microsoft.com/support/complus/mtsandoracle.asp?SD=GN&LN=EN-US&gssnb=1,setting as follow
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSDTC\MTxOCI]
    "OracleXaLib"="oraclient8.dll"
    "OracleSqlLib"="orasql8.dll"
    "OracleOciLib"="oci.dll"

  • Entry point not found msvcr110.dll error

    I have Photoshop CC and Lightroom CC both of which were working fine until I installed a PIE Primefilm XA scanner with CyberviewX software. The programs will not open since ibstalling CyberviewX. The following error appears: PSCC has a Photoshop.exe-Entry Point Not Found (The procedure entry point_crtCreateSymbolicLinkW could not be located in the dynamic link library MSVCR110.dll. Any help would be much appreciated. This error only seems to be associated with CS CC and LR CC.

    Had the same problem with Lightroom 6. This solved the problem
    The Program can't start because MSVCR110.dll is missing from your - Microsoft Community

  • Entry Point Not Found "pluginutils.dll"

    Upgraded to Jabber 10.5 and now users are getting "ciscojabber.exe - entry point not found"  can not be located in the dynamic link library PluginUtils.dll.

    In our case, problem was in previous version of Cisco Jabber. Jabber 9.6.1 was not uninstalled correctly. Old Jabber client was successfully removed and problem is gone.

  • Couldn't start after effect cs4 ( AfterFX.exe - entry point not found ) ( aif_ogl.dll )

    Please Help me!
    I Couldn't start after effect cs4. I also uninstalled and reinstalled it many times but it's giving me this error :
           AfterFX.exe - Entry Point Not Found
    The procedure entry point wglSwapMultipleBuffers could not be located in the dynamic library ........................ \Aif_ogl.dll.

    It means your graphics hardware is not compatible. Update the graphics driver and configure it suitably.
    Mylenium

  • ITunes.exe - entry point not found - VideoToolbox.dll error - can't open!

    hello, can somebody please help me...
    Everytime i open iTunes it comes up with this error message:
    The procedure entry point VTSelectAndCreateVideoDecoderInstance could not be located in the dynamics link libary VideoTookbox.dll.
    I've tried uninstalling, reinstalling, and deleting all iTunes and Quickime files and programs but it still wont work...
    Please help me, Thanks!

    *Replying to smyth_m*
    So I followed the instructions and downloaded the newest version of iTunes like it told me, but after I did that, When I would attempt to get on iTunes an iTunes.exe - Entry Point Not found messege would come up. And it says The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll.
    That's a different one, smyth. At the moment, you could try basiam's workaround from the following post:
    http://discussions.apple.com/thread.jspa?messageID=10444196#10444196
    ... however, this could possibly cause trouble in its own right next time you upgrade iTunes, given that there will be a misplaced, older SQLite3.dll in system32 ... So be sure to remember you've got that dll down there, and if you get an odd message about SQLite3.dll when you try launching iTunes *after your next iTunes upgrade,* delete the old copy of the dll in system32 and see if you get a normal launch without it there.

  • TREXFilter.exe - Entry Point Not Found / sccex.dll

    Hi,
    Recently we've updated our TREX to SAP Netweaver ’04 Version: 6.1.16.02 Build: 6116000416
    When logging on to the TREX server several popups show up with errormessage:
    TREXFilter.exe - Entry Point Not Found
    The procedure entry point CUCheckForEmbeddedObject could not be located
    in the dynamic link library sccex.dll.
    In EP
    (SAP Netweaver ’04 EP6          6.0.16.0.0
    NW ’04 EP6 KMCollaboration     6.0.16.1.0)
    it's not possible to index any index (index administation).
    Server status in TREX monitor is all green.
    Anyone seen this before?
    Any help would be welcome.
    Regards,
    Mark

    Hi,
    I have the same issue with TREX 6.1 revision 25 now...
    Message on OSS open but still no answer.
    The pop-up is preventing TREX from processing the outstanding requests in the Queue...
    Any ideas?
    Kr,
    Michael

  • Unable to find Unique Entry in Table ADR2 for BP Mobile No

    Hello All,
    I need to fetch the details of the mobile no of the business partner
    In the table but021_fs I pass the Bp no and I get the adddress number
    I pass the address no along with the field sms enabled in the table ADR2, the system is giving me two values.

    Hello Atul,
    Sorry for chiming in, but I'd like to make a small correction: table BUT021_FS will show you address-dependent communication data only. So both telephone numbers are address dependent. According to me the situation you're facing is the following:
    1) BP n°320041 is an organization
    2) This organization has an address with telephone number xxx
    3) This organization has also a relationship to a contact person (to find the BP number of this contact person you can search table BUT000-PERSNUMBER = '12351')
    4) Within this relationship, the same telephone number xxx is used.
    What does that mean?
    The same telephone number is used for different purposes (to contact both the organization, and the contact person within the organization). So you'd better ask one functional consultant within your company which one is better.
    Regards,
    Nicolas.

Maybe you are looking for