Unable to find any active legal regulations for determination proc. "TEST1"

Hi Guys
This is in regards to a Customs document for a Payment doc
We have just finished the configuration of the Finance integration which will stop blocked partners during the Payment run
Now when we create a Proposal in the Payment run in ECC, the same document gets transferred to GTS, now even though the SPL is active when we check the Log there is a message Unable to find any active legal regulations for determination proc
Upon further investigation of the customs document i found 2 things
1) In the Geography section Country of Departure is populated with US, but the Country of destination is blank, this might be a reason as the Legal regulation checks both the countries and then activate, any idea how i can get the same to populate?
2) If the above population does happen, from which partner type should it come from, as in my customs document only Vendor and Bank is there, in the PO customs document this is being populated properly
Any idea what is wrong here?
Thanks
Carl

Hi Dave
Thanks for answering again.
I have tried activating it at country level, country/country, country/group, Same result in case of all
As i know now since the Country of Destination is missing, it cannot activate the last two, but the same is also not working at country level.
So is there anyway to maybe have some partner function which can populate the Destination country.
Any other advice will be really helpful..
Thanks
Carl

Similar Messages

  • "No active legal regulations found for country US "  while trying to create the Customs Import Declaration

    Dear Experts,
    As part of creating Customs Import Declaration manually, when I selected the FTO and try to use create button I am getting error message .
    Can you please help me in this regard .
    No active legal regulations found for country US
    Ram

    Hi Ram,
    As the error message straight away tells , you need to activate Legal Regulation for Customs Management ( in standard case, it will be ACE) for US country through the below path:
    SPRO-->SAP Global Trade Services-->Customs Management-->Activate Leagl Regulation for Customs Management at Country/Country Group level
    In case of any further queries, please let me know it.
    Regards,
    Aman

  • Error message on signing back in to Trial Subscription for Azure: "We were unable to find any subscriptions associated your account."

    Having signed up two days ago to a one month Trial Subscription to Window Azure, had my credit card details accepted and installed Windows Azure Powershell cmdlets from http://aka.ms/azpowershell I encounter
    the following error message when I try to log back in a day later (using the Windows Live ID with which I signed up): "We were unable to find any subscriptions associated with your account" . I'd be most grateful
    for help.

    hi,
    Did you resolve this issue? If not, you could try the below:
    I would like to suggest you to try the one that mentioned by Tabrez at: 
    http://social.msdn.microsoft.com/Forums/en-US/7a2acffb-6419-4a3d-8fb4-c8258790a2bb/why-cant-i-sign-up-for-the-1month-free-trial
    [quote]
    Contact support here:   https://support.microsoft.com/oas/default.aspx?gprid=17024&st=1&wfxredirect=1&sd=gn&wa=wsignin1.0&wa=wsignin1.0
    [/quote]
    Please try it.
    Thanks.
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Hi all, Please suggest a case where there is a requirement for new SOAP sender adapter module. I wanted to develop a module but in my current project i am unable to find any such requirement.

    Hi all, Please suggest a case where there is a requirement for new SOAP sender adapter module. I wanted to develop a module but in my current project i am unable to find any such requirement. So please give me inputs for the same..
    Thank you,
    Vinay Kumar A

    You can try converting a synchrnous soap call to asynchronous using a custom module
    Here your module will send a response back to the sender system and make an asynchronous call forward

  • On Windows XP: AirPort Utility was unable to find any base stations

    hi, I've been using AirPort Extreme for at least a year to connect both my eMac and my Lenovo Thinkpad which uses Windows XP. yesterday my Thinkpad was infected with a virus and I went through a lengthy remote session with Norton Antivirus tech people to get rid of it today. Sometime in the middle of the session the Thinkpad stopped being able to connect to the AE wireless network. I got back on the internet by plugging the Thinkpad directly into the router.
    Now on the AE utility it says "unable to find any base stations." so far I tried uninstalling and reinstalling the AE utility and unplugging and restarting the AE base station. On my eMac everything seems to be fine.
    Please help!

    Thanks for your instructions. Basically the same results happened. Is there something else I should be doing on the PC notebook end to connect? The AirPort Utility on my PC still doesn't see any base stations. So using the Access Connections setup the only way I could see to connect with a password was what I described in the previous post. Access Connections sees my network, but fails to connect to it.
    Just to be clear, there hasn't been any problem with my notebook seeing the network. For a long time until recently it was seen by the AirPort Utility on the PC. When Access Connections fails to connect it asks if I want to configure the network and there's a bunch of settings. Connection type: infrastructure or Adhoc, Wireless security type "use static WEP keys", "Use Wi-Fi protected Access - Pre Shared Key (WPA-PSK)" - that seems to be the right one, so I choose it and under Properties there's more options. Access point authentication, WPA-PSK or WPA2-PSK; I've tried it both ways. Data encryption: TKIP or AES, I've been using TKIP. Under Pre-Shared Key, there's the only box I see to enter a password (see previous post).

  • I received an iCloud backup notification on my ipad mini but tapping "OK" does not remove it and therefore I am unable to do any activity on my ipad mini. please help urgent.

    I received an iCloud backup notification on my ipad mini but tapping "OK" does not remove it and therefore I am unable to do any activity on my ipad mini. please help urgent.??

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • HT3728 AIRPORT UTILITY IS UNABLE TO FIND ANY WIRELESS DEVICE 5.6.1

    Ok So I have bought a 2TB Time Capsule, for the past few weeks we have been doing our backups on it etc and just using our already installed Netgear wireless router. Tonight I decided I would "extend an already existing wireless router" - after following all the steps etc and then clicking apply etc, the Airport Utility said that it would need to restart the time capsule etc. After about 5 mins and it looked like it had frozen, airport utility re-started and now all i get is:
    "Airport Utility is Unable to find any wireless device. Make Sure the Airport Wireless Device you want to set up is plugged in and in range of your computer, and then click rescan"
    I have clicked Rescan like 10 times
    I have quit and restarted Airport Utility as well as my Mac OSX 10.5.8
    I have pulled the Time Capsule plug out of it and restarted it
    I have turned of my airport on my computer and turned it back on again
    I have read a number of posts - yet nothing seems to give me any more options other than to rescan.

    If you are trying to connect the Time Capsule to the Netgear router using a wireless only connection, Apple's "extend a wireless network" feature was designed to only work with other Apple routers. It is extremely unlikely that this setting would work with a Netgear product.
    You will need to start over again and perform a Factor Default Reset on the Time Capsule and then re-configure it back to the original settings that you set up previously.
    Resetting an AirPort Base Station or Time Capsule FAQ

  • AirPort Utility unable to find any Apple Express devices.

    Help! This is getting desperate. I bought an AEX for streaming music to my hifi. Installed it yesterday and it worked on both my desktop (running Vista) and my laptop (running XP). However I was experiencing sound dropouts on the Vista machine so, having researched on this forum, I tried to change a couple of settings in my wireless router (D Link DI524) to try and cure the problem.
    My wireless network is still working fine but since making the changes the AirPort Utility software just keeps telling me that it is unable to find any Apple Express devices and I cannot make a connection. It is the same on both my desktop and my laptop.
    I can't see why changing security settings in the router should prevent the Utility from connecting with the device as it has to do this during set up anyway to be incorporated into the network. I have tried a full re-set to factory settings but that didn't work. Any ideas? Otherwise this thing is going back to the store.

    It's ok. It seems to have cured itself. And downloading Vista Anti Lag has cured the sound drop outs too.

  • Unable to find any national character set

    please check your oracle installation...
    and dbassist fails to load.... any idea?
    ps I installed two languages English and italian from the "languages" option
    Thanx for your help.
    Take care
    Renato Dall'Armi

    I ran into the same problem that you have. Did you have a solution for it?
    Regards
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Pui Endo ([email protected]):
    I tried to launch DBAssist and create new database instance
    after Oracle8i server installation. I was getting above the
    error and it says "Unable to find any National Character Set.
    Please check your Oracle installation.
    I am using default character set (US). Is something wrong
    happening in my server installation. Does Oracle prompt for
    choosing character set during installation? I am not a DBA and
    new to Oracle8i. I am try to setup Oracle since we don't have a
    DBA. Anyhelp will be greatly appreciated. The Oracle is
    running on Linux.
    Thanks.<HR></BLOCKQUOTE>
    null

  • Unable to find any airport wireless device

    Hey there. I very recently installed airport Utility (latests version) for windows 7, for the purpose of fowarding ports 1630-1636 for a game. Sadly, whenever i launch Airport Utility, i get the error message "AIrport utility was unable to find any Airport wireles devices. Please make sure your device is in range of your computer and plugged in. Then rescan and try again." Please help! I'm never able to find my modem (which is an airportextreme) making it impossible to foward these ports!
    Any input will be greatly appreciated!

    Are you connected to the Aiport Extreme either wirelessly or by ethernet?

  • Error when access instrument "Primary Error: (Hex 0xBFFA003D​) Unable to find any channel or repeated capability strings"

    Hi All,
    I believe I have configured MAX correctly. I am trying to use the PXI-6229 device via. When I try initialized I receive the following error:
    Primary Error: (Hex 0xBFFA003D) Unable to find any channel  or repeated capability strings.
    Any clues on what the error means?
    Thanks
    Minesh
    Solved!
    Go to Solution.

    First of all you'll get more help in the correct forum.  This seems like a DAQmx issue and their forum is here: http://forums.ni.com/t5/Multifunction-DAQ/bd-p/250
    Secondly does this help: http://forums.ni.com/t5/Switch-Hardware-and-Softwa​re/NI-SwitchExec-with-3499-and-IVIDriver/td-p/1827​...
    Lastly: Can you communicate with the card from MAX?  Or is the error happening in MAX?  What language are you using to talk to the card with?  Are you using IVI?  If you are using LabVIEW or CVI then open the shipping examples and test them out with that card.
    Regards,
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~

  • Trying to set up time capsule but keep getting message stating airport utility was unable to find any airport wireless device. What do I do know?

    Trying to set up my time capsule on my imac.
    Keep getting message "Airport utility was unable to find any airport wireless devices."
    What do I do now?
    joglenn

    When having difficulties accessing the Time Capsule (TC) via the AirPort Utility, try the following, in order checking accessibility with the utility after each step:
    Check the local connection. If you are trying to access the TC wirelessly, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the TC's LAN ports.
    Power cycle the base station. Remove the power adapter's plug from the power outlet, and then, wait 15 seconds before plugging it back in.
    Perform a "factory default" reset on the base station.
    Finally, if you are attempting to access the TC via an Ethernet connection, be sure that your Ethernet port is NOT configured for Jumbo Frames, i.e., using an MTU of 9000+.

  • Unable to find any emails....

    I've updated my z10 to the 10.3.1 and for some reason blackberry assistant is unable to find any emails. I checked the search device options, I don't see a specific option for emails, just message. Either way I can't get blackberry assistant to see my emails when I request it. So far I don't see anyone complaining about this, wondering if I'm the only one. I have pop email btw.... anyone have a solution? Thanks

    I'm still dealing with this issue. I did the update over WiFi. Had no idea it would take so long. BlackBerry assistant dies not seem at its best either. Some things definitely wrong. Hate that it can't see any of my emails no matter what set up I do.

  • Error: Unable to find any Adapter Engines

    Hi all,
    I am trying to execute a very simple scenario.
    A xml-file is read from a drive by the XI system.
    XI reads the values.
    Another xml-file containing some parts of this info is written to another location.
    I see that the file is read and removed.
    However, when I check the monitoring I find follwing error message:
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
      <SAP:P1>af.cx1.cernum05\cx1</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>Exception in SLD client: AbapSLDRequestHandler.exe: Unable to find any Adapter Engines</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.cx1.cernum05\cx1</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
    </SAP:Error>
    Is there some configuration missing?
    We are running XI3.0 SP9.
    Thanks in advance.
    Kind regards

    Hi Geert,
    My first guess is that something is not configured correctly. Try checking if your adapter engine is registered in the SLD:
    In a browser, goto http://host:port/sld. Choose Technical Landscape. Under Technical System Type, select Exchange Infrastructure. You should have an entry like:
    "Adapter Engine on cx1.cernum05"
    If not, check the settings in Visual Administrator for the SLD Provider service and test the update from here.
    Also check your receiver communication channel. Under Adapter Engine, it should say "Integration Server". If it says e.g. af.cx1.cernum05, your SLD has not been updated correctly.
    Regards,
    Thorsten

  • Unable to find the default new form for list mylist1 - deploying the list instance via module feature

    hi,
    am facing a problem deploying a list instance via a feature, 
      I created the list in the UI with content and views.
    Exported the site template as WSP.
    Imported into Visual Studio the list instance, pages module and property bags.
    Copied into my new solution.
    Deploy list instance as a site-collection level scoped feature.
    activated the below features :
    mylist_ModulesFeature
    mylist_ListInstancesFeature
    mylist_PropertyBagFeature
    List deploys fine with content and views. However, I receive the following error when trying to add a new item: “Unable to find the default new form for list”. The same applies for editing items.
    can anyone pls help why i am getting this  error ?

    try these links:
    http://tomvangaever.be/blogv2/2010/04/unable-to-find-the-default-new-form-for-list/
    http://sharebrad.blogspot.in/2012/08/unable-to-find-default-edit-form-for.html
    http://stackoverflow.com/questions/10243131/deploying-a-list-instance-to-sharepoint-2010-error-unable-to-find-the-default-n
    https://happiestsharepointminds.wordpress.com/2014/03/01/unable-to-find-the-default-edit-form-for-list-or-unable-to-find-the-default-display-form-for-list/
    http://itsolutionsblog.net/sharepoint-problem-with-library-forms-unable-to-create-folder-ore-edit-properties/
    http://blogs.technet.com/b/yashgoel-msft/archive/2013/08/30/recreating-default-display-edit-and-new-forms-of-a-list-in-sharepoint-2010-using-powershell.aspx
    Please mark answer as correct if it is correct else vote for it if you find it useful

Maybe you are looking for