Unable to find any national character set

please check your oracle installation...
and dbassist fails to load.... any idea?
ps I installed two languages English and italian from the "languages" option
Thanx for your help.
Take care
Renato Dall'Armi

I ran into the same problem that you have. Did you have a solution for it?
Regards
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Pui Endo ([email protected]):
I tried to launch DBAssist and create new database instance
after Oracle8i server installation. I was getting above the
error and it says "Unable to find any National Character Set.
Please check your Oracle installation.
I am using default character set (US). Is something wrong
happening in my server installation. Does Oracle prompt for
choosing character set during installation? I am not a DBA and
new to Oracle8i. I am try to setup Oracle since we don't have a
DBA. Anyhelp will be greatly appreciated. The Oracle is
running on Linux.
Thanks.<HR></BLOCKQUOTE>
null

Similar Messages

JNLS - National Character Sets

If I open the Oracle Database Configuration Assistent the following Error is returning:
JNLS Exception: Oracle.ntpg.jnls.JNLS Exception
Unable to find any National Character Sets. Please check your Oracle installation.
How can I fix this problem under th following configuration: Linux Slackware 7.0, KDE, Oracle 8i EE.

Hi,
I am having the same problem you had two years ago. Could you please let me know if you got a solution to it. And if so, how.
Thankyou very much.
Sincerely,
Simon.

Trying to set up time capsule but keep getting message stating airport utility was unable to find any airport wireless device. What do I do know?

Trying to set up my time capsule on my imac.
Keep getting message "Airport utility was unable to find any airport wireless devices."
What do I do now?
joglenn

When having difficulties accessing the Time Capsule (TC) via the AirPort Utility, try the following, in order checking accessibility with the utility after each step:
Check the local connection. If you are trying to access the TC wirelessly, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the TC's LAN ports.
Power cycle the base station. Remove the power adapter's plug from the power outlet, and then, wait 15 seconds before plugging it back in.
Perform a "factory default" reset on the base station.
Finally, if you are attempting to access the TC via an Ethernet connection, be sure that your Ethernet port is NOT configured for Jumbo Frames, i.e., using an MTU of 9000+.

HT3728 AIRPORT UTILITY IS UNABLE TO FIND ANY WIRELESS DEVICE 5.6.1

Ok So I have bought a 2TB Time Capsule, for the past few weeks we have been doing our backups on it etc and just using our already installed Netgear wireless router. Tonight I decided I would "extend an already existing wireless router" - after following all the steps etc and then clicking apply etc, the Airport Utility said that it would need to restart the time capsule etc. After about 5 mins and it looked like it had frozen, airport utility re-started and now all i get is:
"Airport Utility is Unable to find any wireless device. Make Sure the Airport Wireless Device you want to set up is plugged in and in range of your computer, and then click rescan"
I have clicked Rescan like 10 times
I have quit and restarted Airport Utility as well as my Mac OSX 10.5.8
I have pulled the Time Capsule plug out of it and restarted it
I have turned of my airport on my computer and turned it back on again
I have read a number of posts - yet nothing seems to give me any more options other than to rescan.

If you are trying to connect the Time Capsule to the Netgear router using a wireless only connection, Apple's "extend a wireless network" feature was designed to only work with other Apple routers. It is extremely unlikely that this setting would work with a Netgear product.
You will need to start over again and perform a Factor Default Reset on the Time Capsule and then re-configure it back to the original settings that you set up previously.
Resetting an AirPort Base Station or Time Capsule FAQ

AirPort Utility unable to find any Apple Express devices.

Help! This is getting desperate. I bought an AEX for streaming music to my hifi. Installed it yesterday and it worked on both my desktop (running Vista) and my laptop (running XP). However I was experiencing sound dropouts on the Vista machine so, having researched on this forum, I tried to change a couple of settings in my wireless router (D Link DI524) to try and cure the problem.
My wireless network is still working fine but since making the changes the AirPort Utility software just keeps telling me that it is unable to find any Apple Express devices and I cannot make a connection. It is the same on both my desktop and my laptop.
I can't see why changing security settings in the router should prevent the Utility from connecting with the device as it has to do this during set up anyway to be incorporated into the network. I have tried a full re-set to factory settings but that didn't work. Any ideas? Otherwise this thing is going back to the store.

It's ok. It seems to have cured itself. And downloading Vista Anti Lag has cured the sound drop outs too.

Unable to find any emails....

I've updated my z10 to the 10.3.1 and for some reason blackberry assistant is unable to find any emails. I checked the search device options, I don't see a specific option for emails, just message. Either way I can't get blackberry assistant to see my emails when I request it. So far I don't see anyone complaining about this, wondering if I'm the only one. I have pop email btw.... anyone have a solution? Thanks

I'm still dealing with this issue. I did the update over WiFi. Had no idea it would take so long. BlackBerry assistant dies not seem at its best either. Some things definitely wrong. Hate that it can't see any of my emails no matter what set up I do.

AirPort utility unable to find any AirPort wireless devices

Hi All,
I have an issue I have no idea how to resolve. I recently purchased a 2TB Time capsule and after a few teething issues have had it working as both router and external storage. I have spent the last 2 weeks transferring all my media to this for central access from all networked computers.
Its been running fine the whole time until today. For some reason my internet connection was dropped. I turned off the TC and my Modem, and then restarted in the right order.
WiFi connection is Excellent. I can connect to my mapped TC drive, but I cannot connect to either the internet (my network is now only allowing 'Local Connection') and the Airport utility is unable to find any Airport wireless devices. I was hoping i'd be able to see an issue through the utility but it cant even recognise the device!
I am yet to do a hard re-set of the TC as I want to avoid having to go through the network set up again and I assume this is the information that is lost? I'm also concerned I will lose the content of the TC and i really dont have the time or the patience to go through that exercise again.
Any ideas?
Thanks in advance,
Mark

Thanks for the quick response!
My Modem is not the issue in this case as I have already connected via network cable directly to it and am using it to connect to the internet now.
I had issues with IP conflict etc when setting up the network and suspect something similar this time, except I cant even open the TC to check the set up as AirPort utilities cant see it.
I think I have the TC doing the routing as all periphrals attached to the network were getting a 10.0.1.x IP address, but I have to confess this is not my forte and neither is pinging things as I dont understand any of the information that comes back!
I assume the hard re-set option is a last resort? I'm tempted to just do it as I cant see I'll be any worse off than now... but I'll hold off and do the proper diagnosis.
Unfortunately I'm away for the next 2 days so wont get this resolved before then... I have the internet hard wired so that will keep the wife happy... but i will look into this further and report back with more details on my return.
Thanks,
Mark

My Windows Vista Computer is unable to find any AirPort wireless devices

My Windows Vista computer is unable to find any AirPort wireless devices. I just set this up using another (different) computer and it works fine on that one...

Per chance was the other computer that was able to "find" the AirPort base station another Win Vista device or another using another OS?

ORA-12714: invalid national character set specified

i have the following error
ORA-12714: invalid national character set specified
when i read a table.
my database having the below nls parameters
NLS_LANGUAGE - AMERICAN
NLS_CHARACTERSET -WE8ISO8859P1
NLS_NCHAR_CHARACTERSET -AL16UTF16
i was tried to set the set nls_lang=AMERICAN_AMERICA.WE8ISO8859P1 during the export
any solution?

What is your exact database version ?
What is the complete command that triggered this error ?
There is a in know bug in some releases < 10.2 about this error:

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

Which version of OSX and what email provider are you using.

Error message on signing back in to Trial Subscription for Azure: "We were unable to find any subscriptions associated your account."

Having signed up two days ago to a one month Trial Subscription to Window Azure, had my credit card details accepted and installed Windows Azure Powershell cmdlets from http://aka.ms/azpowershell I encounter
the following error message when I try to log back in a day later (using the Windows Live ID with which I signed up): "We were unable to find any subscriptions associated with your account" . I'd be most grateful
for help.

hi,
Did you resolve this issue? If not, you could try the below:
I would like to suggest you to try the one that mentioned by Tabrez at:
http://social.msdn.microsoft.com/Forums/en-US/7a2acffb-6419-4a3d-8fb4-c8258790a2bb/why-cant-i-sign-up-for-the-1month-free-trial
[quote]
Contact support here: https://support.microsoft.com/oas/default.aspx?gprid=17024&st=1&wfxredirect=1&sd=gn&wa=wsignin1.0&wa=wsignin1.0
[/quote]
Please try it.
Thanks.
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I am having issues with my iphone6 bluetooth connection in my car. When going to settings under bluetooth, it is unable to find any devices. I did not have this issue until I downloaded IOS 8.0.2. Do you know if there has been any resolution yet?

I am having issues with my iphone6 Bluetooth connection in my 2013 Mercedes C Class. When going to settings under Bluetooth, it is unable to find any devices. I did not have this issue until I downloaded IOS 8.0.2. Do you know if there has been any resolution from Apple yet?

Hi susan from WSL,
Welcome to the Apple Support Communities!
I understand that when your Bluetooth accessories, such as your car connection, do not work as expected it can be very frustrating. In this situation, I would recommend working through the troubleshooting steps provided in the attached article.
If you can’t use a Bluetooth accessory or car kit
Cheers,
Joe

Unable to find any active legal regulations for determination proc. "TEST1"

Hi Guys
This is in regards to a Customs document for a Payment doc
We have just finished the configuration of the Finance integration which will stop blocked partners during the Payment run
Now when we create a Proposal in the Payment run in ECC, the same document gets transferred to GTS, now even though the SPL is active when we check the Log there is a message Unable to find any active legal regulations for determination proc
Upon further investigation of the customs document i found 2 things
1) In the Geography section Country of Departure is populated with US, but the Country of destination is blank, this might be a reason as the Legal regulation checks both the countries and then activate, any idea how i can get the same to populate?
2) If the above population does happen, from which partner type should it come from, as in my customs document only Vendor and Bank is there, in the PO customs document this is being populated properly
Any idea what is wrong here?
Thanks
Carl

Hi Dave
Thanks for answering again.
I have tried activating it at country level, country/country, country/group, Same result in case of all
As i know now since the Country of Destination is missing, it cannot activate the last two, but the same is also not working at country level.
So is there anyway to maybe have some partner function which can populate the Destination country.
Any other advice will be really helpful..
Thanks
Carl

Hi all, Please suggest a case where there is a requirement for new SOAP sender adapter module. I wanted to develop a module but in my current project i am unable to find any such requirement.

Hi all, Please suggest a case where there is a requirement for new SOAP sender adapter module. I wanted to develop a module but in my current project i am unable to find any such requirement. So please give me inputs for the same..
Thank you,
Vinay Kumar A

You can try converting a synchrnous soap call to asynchronous using a custom module
Here your module will send a response back to the sender system and make an asynchronous call forward

How to Change National character set for a database

Hi All,
My database is Oracle 10G. Stand alone DB.
National character set for my DB is "WE8ISO8859P1" and need to change national character set to UTF8.
Need Help on this.
Thanks in advance.
Regards,
Suresh

Please go through the topic,
[http://arjudba.blogspot.com/2009/02/what-is-national-character-set.html|http://arjudba.blogspot.com/2009/02/what-is-national-character-set.html] [http://arjudba.blogspot.com/2009/03/unicode-characterset-in-oracle-database.html|http://arjudba.blogspot.com/2009/03/unicode-characterset-in-oracle-database.html]
and decide whether you need migration . If you need migration then have a look at,
[http://arjudba.blogspot.com/2009/03/difference-between-we8mswin1252-and.html|http://arjudba.blogspot.com/2009/03/difference-between-we8mswin1252-and.html]
[http://arjudba.blogspot.com/2009/03/difference-between-we8iso8859p1-and.html|http://arjudba.blogspot.com/2009/03/difference-between-we8iso8859p1-and.html]
[http://arjudba.blogspot.com/2009/03/difference-between-we8iso8859p1-and_11.html|http://arjudba.blogspot.com/2009/03/difference-between-we8iso8859p1-and_11.html]
And always check for reports in csscan.
Edited by: user9533551 on 07-Jul-2009 04:29

Unable to find any national character set

Similar Messages

Maybe you are looking for