Unable to find bootcamp in control panel after upgrade to Mac OS X 10.6.8, please help.

Unable to find bootcamp after upgrade tp Mac OS X 10.6.8, please help.

you problem is in OS X (guessing here)
Guess #2: you use an NTFS driver in Mac OS X
Try OS X forum? No?
When you do reboot into Windows - use Option key for one - and go to Windows Control Panel: Boot Camp: the Startup Disk section to change the default OS is there and works.
It isn't "boot camp" it is Windows. Boot Camp are drivers, control panel, program to partition. What you wanted to see was "Windows" OS to change the default.
Do you 'see' Windows volume on the Desktop as being physically there?
Opened Disk Utility and look at the drives and volumes: Windows volumne is still present.

Similar Messages

  • Unable to open Bootcamp install of Vista after upgrading MacBook Pro / Mid 2010 to OS Mavericks

    Dear Community,
    I am unable able to boot the Windows Vista install (via Boot Camp) on my MacBook Pro / mid 2010 after upgrading to OS Maverick.
    Any idea about how this problem can be solved (I don't want to purchase Windows 7 and I don't want to purchase a virtual machine)?
    Many thanks for your support!
    Regards,
    PSeguro

    Hello 88,
    I haven't resized / modified anything since installing Vista on my System. The problem must have incurred when upgrading from Snow Leopard to Maverick.
    by the way:
    I (just) found out that Windows Vista is booting (automatically) when I insert my original "Mac OS X Install DVD" / 10.6.3 (or my "Applications Install DVD") before starting the MacBook. It will - hwr - not boot without above DVDs in the tray...
    sudo fdisk /dev/disk0:
    Disk: /dev/disk0          geometry: 60801/255/63 [976773168 sectors]
    Signature: 0xAA55
             Starting       Ending
    #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
    1: EE 1023 254  63 - 1023 254  63 [         1 -     409639] <Unknown ID>
    2: AF 1023 254  63 - 1023 254  63 [    409640 -  510699696] HFS+       
    3: AB 1023 254  63 - 1023 254  63 [ 511109336 -    1269544] Darwin Boot
    *4: 07 1023 254  63 - 1023 254  63 [ 512378880 -  464394240] HPFS/QNX/AUX
    sudo gpt -r -vv show disk0:
    gpt show: disk0: mediasize=500107862016; sectorsize=512; blocks=976773168
    gpt show: disk0: Suspicious MBR at sector 0
    gpt show: disk0: Pri GPT at sector 1
    gpt show: disk0: Sec GPT at sector 976773167
          start       size  index  contents
              0          1         MBR
              1          1         Pri GPT header
              2         32         Pri GPT table
             34          6        
             40     409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
         409640  510699696      2  GPT part - 48465300-0000-11AA-AA11-00306543ECAC
      511109336    1269544      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      512378880  464394240      4  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
      976773120         15        
      976773135         32         Sec GPT table
      976773167          1         Sec GPT header
    Regards,

  • After upgrades iMac will not completely restart.. lost please help

    Hi, I am new to the forum but I have been scouring the net for an answer to my problem. I have found some similar problems but nothing exact so I decided to post to make a deadline. Please help.
    Yesterday night I got one of those apple software updates. I cant remember what it was for but it was fot 3 different things nothing out of the ordinary. Once they were installed I had to restart my computer. I did this and when I did my computer booted up and froze at the blue screen after the white/grey apple screen and will go no further.
    Heres where it gets a little different from other posts I have found. I have a wireless keyboard and mouse so I cannot run the start up disks or get to safe mode. I bought a different usb mouse and keyboard today and am now able to put disks in and out of the disk drive by holding down the left button during start up. The only problem the keyboard came with software that needs to be installed to make it work. So it is still impossible to connect to a keyboard. So I still cant hold shift, control or c to get to safe mode or run my mac disks.
    Im not sure where to go from hear. I have a seagate external harddrive backing everything up so hopefully I didnt lose everything. Any help would be great I am lost.
    Thanks for your time

    When you get the new keyboard, start up from Disk Utility
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk.
    Reboot, then repair permissions from your hard drive.

  • HT4759 How do I find the icloud control panel in a Windows 8 PC environment

    How do I find the icloud control panel in a Windows 8 PC environment

    Go to the Start screen, then click the iCloud tile.
    http://support.apple.com/kb/PH12803

  • PC went south. Geeks brought it back. PS elements and premier 11 can't start. Error msg sez configuration incorrect needs to be reinstalled. When I load the disk I get a blank screen. Try to uninstall and can't find apps i control panel. How can I get the

    PC went south. Geeks brought it back. PS elements and premier 11 can't start. Error msg sez configuration incorrect needs to be reinstalled. When I load the disk I get a blank screen. Try to uninstall and can't find apps i control panel. How can I get the apps back?

    adobeamatuer
    Thanks for the reply.
    Although the security of Windows XP SP3 32 bit is compromised by Microsoft no longer supporting XP, if Windows XP was restored as claimed, you should still be able to install/uninstall Premiere Elements versions of it that you did before the Microsoft support removal.
    I think a revisit to the Geeks would be in order. It may be that they could not restore Windows XP because of the Microsoft non support. I would take along the Premiere Elements installation disks so that you do not leave there without actually seeing Premiere Elements (or a non Adobe program) running on your restored Windows XP. What was the other software that you tried to use that did not work?
    Please update us on your progress when you get a chance.
    Best wishes
    Thanks.
    ATR
    Add On...spelling correct 12 03 2014.

  • QuickTime 7 not in Control Panel after installing QuickTime 7.6.6

    Hi, I need some assistance please
    I don't have QuickTime 7 in my Control Panel after installing QuickTime 7.6.6. I only see QuickTime in control Panel but not QuickTime 7.
    How can i fix this?

    If you launch your QuickTime Player and go "Help > About QuickTime Player", what version number appears for you, Ried?

  • Cant sign into control panel after new

    cant sign into control panel after new Firmware instaltion. Please help. WRT160N v2

    Thats nice to know that, So just reboot a modem has solve the problem. Enjoy.

  • How do I locate the quicktime control panel (to upgrade to quicktime pro) in Windows 7 home premium?

    I just paid to upgrade QuickTime and received a registration code. Tho problem is there is no way to find the QuickTime control panel via the Windows 7 Home Premium control panel. How to I ovrcome this?
    p.s. I'm a newbe to QuickTime :-)

    Thanks Gary,
    This does not help me... the instructions state:
    1. Locate the QuickTime 7 Control Panel
    From the Windows Desktop, click on the Start menu, choose Settings, then choose Control Panel, then locate the QuickTime 7 Control Panel.
    However, I cannot locate the QuickTime 7 Control Panel on the Windows 7 control panel -- it's not listed anywhere in the available options.

  • Unable to print from HP Laserjet P1102 after upgrading to Mavericks

    Unable to print from HP Laserjet P1102 after upgrading to Mavericks.

    plz try to download the following set of drivers from the link below :::\
    http://gimp-print.sourceforge.net/MacOSX.php3
    This is a new set of default drivers and mayhelp u in resolving the issue.
    Plz do run disk first aid after installing the driver....might suggest even before installaing.
    Thanx !! for trying.

  • I am unable to install itunes onto my pc. I am unable to find where it saves it or even if it has saved it. Can anyone help?

    I am unable to install itunes onto my pc. I am unable to find where it saves it or even if it has saved it. Can anyone help?

    itunes 11 has a specific spec that needs to be met before you can install it. Please verify from this if your pc pass the requirement from this link
    iTunes 11 for Windows - Technical Specifications
    Unless otherwise specified, in C:\Documents and Settings\User\Local Settings\Temp. However, if you want to know for sure for your system, download something (if you haven't already) and do a search for that specific dwnld. Then, drill down to the containing folder.

  • We are unable to find a user that matches the Rep.ID and Password you have entered. Please verify and try again. work on IE but now Firefox

    We are unable to find a user that matches the Rep.ID and Password you have entered.
    Please verify and try again.
    I get this error when trying to access my Wild Tree web site
    http://resources.wildtree.com/MyWildtree/RepLogin.aspx?ReturnUrl=%2fmywildtree%2fMain.aspx
    I can log in just fine to the main page, but then they make you log in again as you go deeper into the site for Security reasons. But when I log in the 2nd time, I get the above error. Help

    This can be caused by corrupted cookies or cookies that are blocked (check the permissions on the about:permissions page).
    *https://support.mozilla.org/kb/fix-login-issues-on-websites-require-passwords
    Note that you may have to enable third-party cookies for that domain or for visited sites.
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history"
    Clear the cache and cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
    If clearing cookies doesn't work then it is possible that the <i>cookies.sqlite</i> file that stores the cookies is corrupted.
    Rename (or delete) <b>cookies.sqlite</b> (cookies.sqlite.old) and delete other present cookies files like <b>cookies.sqlite-journal</b> in the Firefox profile folder in case the file cookies.sqlite got corrupted.
    *http://kb.mozillazine.org/Cookies
    *https://support.mozilla.org/kb/Deleting+cookies

  • HT204407 Find my friends Icon disappeared after upgrade to ios 8. I tried restarting as well as reinstalled the app but its not working. I can find it in Usage, but not in spot light. Pla help!!j

    Find my friends Icon disappeared after upgrade to ios 8. I tried restarting as well as reinstalled the app but its not working. I can find it in Usage, but not in spot light. Pla help!!

    I have exactly the same problem on a 4S on iOS 8. Have tried uninstalling, deleting FMF from backup, resetting phone and restoring from backup, but the problem remains. Sometimes the icon appears on a backup Home screen in iTunes, but it never appears on the phone itself. The app is accessible by going to the store, purchases and opening it from there. The app appears to have been running the whole time, but becomes invisible anytime I return to the home screen.

  • After upgrading to MAC OS X 10.10.2 Lightroom 5 has an error that it cannot read the card when trying to import photos.  The card is fine as I can import into iPhoto so any ideas?

    After upgrading to MAC OS X 10.10.2 Lightroom 5 cannot read the card (RAW files , converting to DNG) when importing.  The card is fine as I can import into iPhoto - any ideas?

    It’s usually necessary to trash the prefs after updating OSX to Yosemite. Start by quitting Lightroom 5.
    Launch Finder and click the Go menu whilst holding down the Option (alt) key. Then go to:
    Library >> Preferences
    clear everything relating to LR5 which usually means deleting the following files:
    com.adobe.Lightroom5.plist
    com.adobe.Lightroom5LSSharedFileList.plist
    Then re-launch Lightroom.

  • Elements 11 is not running anymore after upgrading my Mac to Mountain Lion

    Elements 11 is not running anymore after upgrading my Mac to Mountain Lion

    PSE11 does work OK with Mountain Lion but you need to delete the saved prefs and application state.
    Quit Elements.
    Launch Finder and click on Go (hold down the optn key) and click on Library when it appears in the list below Home.
    Delete the following files from the Preferences folder:
    com.adobe.PhotoshopElements.plist    
    Adobe Photoshop Elements 11 Paths
    Adobe Photoshop Elements 11 Settings
    Delete this file from the Saved Application State folder:
    com.adobe.PhotoshopElements.savedState

  • After upgrading to mac os 10.10

    after upgrading to mac os 10.10 "command+A" is not working for copying url and a particular text in an article
    i tried using the general way that is"edit >select all" but its selecting the entire page when i try selecting the sentence!
    please help!

    It’s usually necessary to trash the prefs after updating OSX to Yosemite. Start by quitting Lightroom 5.
    Launch Finder and click the Go menu whilst holding down the Option (alt) key. Then go to:
    Library >> Preferences
    clear everything relating to LR5 which usually means deleting the following files:
    com.adobe.Lightroom5.plist
    com.adobe.Lightroom5LSSharedFileList.plist
    Then re-launch Lightroom.

Maybe you are looking for

  • How to set cell background color for JCheckBox renderer in JTable?

    I need to display table one row with white color and another row with customized color. But Boolean column cannot set color background color. Here is my codes. import javax.swing.*; import javax.swing.border.*; import javax.swing.table.*; import java

  • Error while accessing Heirarchy node in report

    Hi Experts, I am getting an error message while accessing a node in hierarchy while using variables for reports. I used Tcode RSZV but its throwing error that it doesnot exist in BW 3.x and it is embedded in Bex. Can any one guide me for any other op

  • Errors 363500 and 56 on HTTPS GET.vi

    Hello, I'm trying to execute my program, but it keeps pausing every few minutes primarily due to errors 56 and 363500 of the HTTPS Client Library. Using General Error Handler I tried to cancel these errors and make the VI run and try again; however,

  • Share custom PDF settings

    This question was posted in response to the following article: http://help.adobe.com/en_US/acrobat/pro/using/WSb2f1a50375cd48d3-1f36d19412ada208ceb-7fff. html

  • Can't access to Windows xp from 10.4 G4 digital audio **Troubleshooting**?

    Hello everyone! I have a home wireless network a G4 desktop running 10.4 and I have been trying to shares files with my laptop (windows XP)*(I can access the mac from the windows XP).* I already click on the sharing and i tried this approach *http://