Unable to find compatible TPM

Hello there.
We have a few machines, with the correct (generic) TPM driver discovered by Windows 7 and the enabling of TPM in the BIOS, that still do not get encrypted and are complaining to the MBAM console that they are "Unable to find compatible TPM."
Any idea what else might be ailing those workstations?

What version of TPM is on the machine? Is the TPM initialized?
You could find it by typing TPM.msc from run.

Similar Messages

  • MBAM 2.5 Unable to find compatible TPM despite TPM available and device encrypted

    We have just installed and are piloting MBAM 2.5. Everything seems to have gone fine, machines are checking in getting policies, encrypting as they are supposed to and we can query MBAM for recovery keys and TPM passwords to do recoveries as needed.
    The only issue we have is when we come to look at the compliance reports we see the following
    Enterprise Compliance report - Machines show 'Unable to find compatible TPM'
    In Computer Compliance report for one of these machines , Protector type is TPM+PIN, Protector state is ON, Encryption State is Encrypted yet compliance status is Non-Compliant.
    TPM is ON, Initialised and is v1.2
    Any suggestions as to why my machines status is non-compliant?

    I was having the same problem with some of my Dell Laptop clients and although the Hotfix did solve the problem, I thought it was worth mentioning the first time the client reported back to MABM after installing the hotfix, only the Compliance Status changed
    from "Non-Compliant" to "Compliant" and the Compliance Status Details still showed "Unable to find compatible TPM". It took one more reporting cycle for the Compliance Status Details  to show "No Error".  I
    would also like to mention there is no indication of anything wrong with these systems in terms of looking at them via the TPM.msc, MBAM Event Log or WMI Win32_Tpm class/properties. The systems encrypt the drive via MBAM normally...they just don't
    report back to the MABM database properly. The computers are running the latest BIOS and I have reset the TPM Security BIOS settings back to their Defaults several times with the same results. Thanks for the hotfix!!!  

  • In an MBAM report, what does "Unable to Find Compatible TPM" mean?

    All of our machines are fairly new and have recent TPM chips.  Does this error mean:
    1. The TPM is not enabled in the BIOS.
    2. The TPM is enabled in the BIOS, but no one has taken ownership of it?
    3. It could mean either of the above cases.
    If it just needs to have someone take ownership of it, is there a way to do that remotely via the manage-bde.exe tool?

    "To enable BitLocker you need to have the following requirements satisfied...
    The computer must have a version 1.2 TPM chip or later.
    The BIOS must support Trusted Computing Group (TCG) specifications.
    The TPM chip must be enabled in the BIOS.
    Above error indicates that you are missing the requirements..."
    When I try to enable bit locker it gives me an error and won't allow me to enable it.
    http://www.pcandtablet.com/windows-8-errors-and-crashes/273/when-i-try-to-enable-bit-locker-it-gives-me-an-error-and-wont-allow-me-to-enable-it.html
    http://www.howtogeek.com/howto/6229/how-to-use-bitlocker-on-drives-without-tpm/ 
    Hetti Arachchige V Aravinda |
    Microsoft Community Support |
    Windows Tech Information
    (B.Sc, Microsoft Small Business Specialist, Dip. in Network Administration, MCP, MCTS,
    MCSA, MCSE, MCITP, CCNA, MBCS)
    Don't forget to mark this as helpful if you found this is helpful ,and its the answer mark this as answer.

  • I own a MAC Pro 3,1 (early 2008) and am running Mavericks 10.9.3 with no problems. I would like to add an I/O card to add USB 3 functionality or ESATA functionality but am unable to find a compatible card. As such my question...can I do this and if so wha

    I own a MAC Pro 3,1 (early 2008) and am running Mavericks 10.9.3 with no problems. I would like to add an I/O card to add USB 3 functionality or ESATA functionality but am unable to find a compatible card. As such my question...can I do this and if so what is the best card?
    Thank you

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
    Also see:
    https://discussions.apple.com/thread/6282459?tstart=0

  • Hi, I am using my icloud on my iphone but am unable to find it on my mac book pro. It's not under my system preferences like it shows under the setup. Can I download it again? Or something. I just need to backup some files on my computer and am unable.

    Hi, I am using my icloud on my iphone but am unable to find it on my mac book pro. It's not under my system preferences like it shows under the setup. Can I download it again? Or something. I just need to backup some files on my computer and am unable.

    The minimum requirement for iCloud is Lion 10.7.5 (Mavericks preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is now non-functional - you cannot now open or access a MobileMe account.
    To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
    The requirements for Lion are:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
    The requirements for Mountain Lion and Mavericks are:
    OS X v10.6.8 or later
    2GB of memory
    8GB of available space
      and the supported models are:
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    Xserve (Early 2009)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    It is available from the Mac App Store (in Applications).
      You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

  • Photosmart 5510 unable to find my MacBook pro.

    I have read many posts with regards to scanner and printing issues with printer compatible AirPrint. I have tried all solutions by the experts but my printer cannot scan from computer, error message is "unable to find computer make sure printer is connected to a network and turned on". I find that not all the setting are available in order to turn on Scan to Computer. I have tried two HP printers Photosmart 5510 and 3050 both with same results, I have eventually established a more permanent connection by selecting the Bonjour name for the printer when adding a printer to Print & Scan, not the HP name.The HP software did not appear to work for me as it was unable to find the wireless printer on the network. So I used the option to obtain  wireless connection to my router using the printer panel, then adding the printer from Print & Scan and ensure that AirPrint is selected not Printer Software.
    I still have issues when printing from a web page but I can work around that as I also have IOS devices where I use HP Apps, even though Airprint should work on these devices without needing apps.
    My OSX is Mountain Lion
    Macbook is mid 2010
    Printer is Photosmart5510 B111a

    It sounds like the issue is with the printing system since Airprint works (which is a very different system all together).  The scan function will not work with Airprint and the full featured drivers is required to have that functionality from HP.  However, there are alternative ways to scan if you want some scanning functionality until the software issue is corrected.
    Try resetting the printing system before continuing.  Resetting the printing system will remove any printers from the system.
    Have you tried installing the newest 10.8 full featured drivers from HP?
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Unable to Find Specified Objet

    I am installing Consice Oxford Englis Dictionary that i down loadad from http://www.mobi-systems.com but its displaying
    System:
    Unable to find the specfied object. Any one have idea whyt his error is coming. Dictionary is compatible for Symbin Os.

    The product is for Symbian Series 60 devices. 9500/9300/9300i are Series 80 devices.
    - PetMessage Edited by realpet on 09-Feb-2006
    01:11 PM

  • Unable to find base station

    I just got a Mac Pro and Airport Extreme 802.11n Base Station. I was able to set up the AEBS using the Mac Pro (running Leopard), and am able to connect to it using the Mac Pro without any problems. I also updated the firmware on the AEBS. Unfortunately, I am unable to connect to the AEBS using my laptops. I have a Macbook Pro and a Titanium Powerbook, both running 10.4.11. When I try to connect to the AEBS using Airport Utility 5.2.1 with either laptop, I get an "unable to find base station" message. Both laptops are in the same room as the Mac Pro (about 30' from the AEBS, which is in another room), and both are fitted with the original Apple Airport cards. I realize that I could install Leopard on the laptops to see if that did the trick, but I'd rather not go to all the trouble if I can help it. Any suggestions as to what may be wrong with the laptop setups that's interfering with my Airport reception? Thanks.

    Is the Mac Pro connected wirelessly or via a cable? I am guessing it is wired since you have to pay extra for the wireless.
    In your configuration make sure you have not enabled "Create a closed network". This turns off the SSID and will not allow it to be found by the laptops. And of course make sure you have not set Wireless Mode to OFF.
    Beyond that to test for interference you can change the radio mode to 802.11n (802.11a Compatible) and see if the Macbook Pro will work. This will force the Airport to use the 5GHz radio which removes most interference.
    Hope this helps

  • Unable to find phone type in CUCM for manual registration

    Hi
    We are using CUCM 8.0.3 , unable to find Phone type Cisco 8831 for manual registration. How can I add this phone type to CUCM ? Any help is appreciated.

    Hi there,
    +5 to my friends Mahmood & Nadeem here for their good ideas.
    The problem here is that there is no Device Pack for CUCM 8.0.3 that supports the 8831 :( The ReadMe below is for the last/latest 8.0.3 device pack;
    http://www.cisco.com/web/software/282074299/92918/cmterm-devicepack-8_0_3_24051-1_Readme.pdf
    You would need to upgrade CUCM to a minimum of 8.5.1 and then install ;
    Cisco Unified Communications Manager 8.5(1.17118-1) Device Package - Compatible UCM Version: 8.5 
    cmterm-devicepack8.5.1.17121-1.cop.sgn
    Cheers!
    Rob

  • Trouble with Audio Console "Unable to find Audio device.

    I have an Audigy 2 ZS Platinum and run XP Pro. Recently lost my install CD when moving back to school (crap...)
    I was able to download and install the drivers for the card from creative. Windows Hardware manager says the device is working properly (more accurately the many devices associated with the sound card) and I know the device is functioning (at least in part) because I am able to play music through the digital optical out on the dri've bay panel.
    At this point I am trying to install Audio Console.
    I have downloaded and installed Audio Console from creative's website and then restarted my computer. Upon trying to launch the program the following message appears in a pop up:
    "Unable to find Audio device. Please make sure that your audio device is enabled and installed with it's driver. This application will be closed."
    I have checked 'Sounds and Audio Devices' in the control panel and it has "SB Audigy 2 ZS Audio [B400]" for all selected audio devices.
    What's the problem here? Has anyone encountered this problem before?
    The Audigy 2 ZS Platinum is listed as compatible with the Audio Console software.
    Thanks for any help you can offer!

    jsilverman wrote:
    I have an Audigy 2 ZS Platinum and run XP Pro. Recently lost my install CD when moving back to school (crap...)I was able to download and install the drivers for the card from creative. Windows Hardware manager says the device is working properly (more accurately the many devices associated with the sound card) and I know the device is functioning (at least in part) because I am able to play music through the digital optical out on the dri've bay panel.At this point I am trying to install Audio Console. I have downloaded and installed Audio Console from creative's website and then restarted my computer. Upon trying to launch the program the following message appears in a pop up: "Unable to find Audio device. Please make sure that your audio device is enabled and installed with it's driver. This application will be closed." I have checked 'Sounds and Audio Devices' in the control panel and it has "SB Audigy 2 ZS Audio [B400]" for all selected audio devices. What's the problem here? Has anyone encountered this problem before?The Audigy 2 ZS Platinum is listed as compatible with the Audio Console software. Thanks for any help you can offer!
    Thanks to BadBoy, you can find the link to download the A2Zs Installation CD from HERE
    .jtp

  • Unable to find Oracle quote Lines Data

    Hi,
    I have to find the query or any other data source which is getting the data for the Print quote report. I am unable to find out from where the data in report is being displayed.
    The Flow is like...
    Search for any quote.
    Click on the quote link
    One Drop poplist will be displayed. Select Print Quote
    And click on the submit button. The PDF report generated,
    Now I have to find out from where this data is coming. Can anyone help me on this.
    Thanks
    Anoop

    Anoop,
    This is a JTT page and there is no VO. If you wanna see how this report is built check out qotSCocPrint.jsp. Here data source are quoting classes. If u need any quoting related data y do u worry about source, y don't u directly hit quoting tables like aso_quote_headers_all and aso_quote_lines_all.
    --Mukul                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • I'm using matchbook pro and I'm unable to find iPhoto after upgrading to Maverick os

    I'm using matchbook pro and I'm unable to find iPhoto after upgrading to Maverick os

    Open the Mac App Store application and see if iPhoto is under your "Purchases" tab.
    Clinton

  • Error Message: "Unable to find qm_dw.htm

    (I'm a low-to-moderate ability user - just upgraded from MX2004 to CS4 and just moved from PC to MacBook) I'm working through various DW CS4 tutorials and added one 'Adobe' plug-in (Lorem and More). On recent DW start-ups I have started getting the message "Unable to find qm_dw.htm in the Configuration/Floaters directory. The floater will not be shown." Does anyone know how I can resolve this? Many thanks in anticipation. John.

    In case it helps, try deleting the DW cache file
    http://kb2.adobe.com/cps/191/tn_19105.html#dat (step 4)

  • Photoshop unable to find Java script plugin

    Since the last ACR update to PSCS6, I am unable to browse in Bridge or Mini Bridge and I get the error message "Could not complete the Browse in Bridge Command because Photoshop was unable to find the JavaScript plugin". When I try to open mini bridge, it will open but there is the error message: "Could not complete the command because the extension could not be loaded". I have tried a system restore and read all of the posts related to this error but no one seems to come up with an answer. I tried pasting the .dll files recommended in another post but that did not help. I tried the suggestion to run PS as an administrator but that did not work. I have searched the web, many people have this problem but very few answers, as per usual with Adobe. Using PSCS6 x64 with Windows7x64. Need help!

    My mind reading abilities are a bit fuzzy today.
    I can't seem to read what version of Photoshop, what computer, what OS you are using?

  • Unable to find Bean and AM impl for customisation of Fusion Application

    Hi,
    Iam navigating through this link
    under Fusion App --> Navigator -->WarehouseOperation -->REceipts --> and Entering createReceipt screen via Receive Expected Shipments. I want to default the value of packing slip as how supplier got defaulted but in editable mode. For this i want to know how supplier got defaulted and in same way i want to default Packing slip number.
    But iam unable to find the managed bean or AMimpl java file for doing code change.
    "Copylines" is default activity and from there it is navigating to CreateReceipt.jsff, i don't find any parameter carrying the value for Supplier.
    So Logic must be either in Managed Bean or in AmImpl . I need to include my logic also here. But unable to find the necessary file.
    reg,
    Lakshmi.

    While creating a receipt, you select one or more orders belonging to a single supplier and then create one receipt against that. And that is how the supplier field gets defaulted in the Create Receipt UI.
    Packing slip is also defaulted when the user receives against ASN provided it is captured at the time of creation of the ASN.
    For a regular PO receipt, the user is expected to enter the packing slip by default.
    Can you describe your exact requirement in detail?
    The customization framework does allow the value of a field to be overwritten but using this, you will always have a predefined value or some limited logic using EL.
    But we would not recommend that because when you customize the value of a field, it will discard the value that is fetched from the database.
    This can potentially break the default functionality of receiving where the packing slip is defaulted from the ASN.
    And another question that I have is the need for the AM details - this particular code is present in the AM and not the managed bean.
    Are you planning to extend the AM that is shipped by receiving?

Maybe you are looking for