"Unable to Find Device" error, e51
I can't seem to get the update to work. It thinks for a long while, and then comes back with the above error.
Phone is set to "General"
When I connect to the USB, I select "PC Suite"
The connection icon appears on the phone home page
When I run Suite, it loads the phone SMS messages, I can backup, etc.
The phone icon with "connected via USB" message appears in the Windows notification area
But when I run the Updater, it cannot find the phone.
I tried a different USB port, but no luck.
Ideas?
*#0000# =
300.34.56
11-12-2008
RM-244
Nokia E-51 (1)
updater v. 1.7.3
Suite v. 7.1.30.9
I have the exact same issue. I have followed similar problem threads that suggest using the pc suite remover, uninstalling nsu, restart, reinstall both, restart, try again. No matter what...the PC Suite finds the device, NSU does not....
It was a long time ago but I believe I updated the firmware once before with the older software without issue.
currently
100.34.20 29-09-2007
RM-244
Nokia E51
updater v. 1.7.3
Suite v. 7.1.30.9
Software installed on XP SP2, cable usb connection.
Are there any suggestions for fixing this problem....
Message Edited by ljb26le on 05-Sep-2009 05:12 AM
Similar Messages
-
[SOLVED] linux-lts GRUB "Unable to find device" error
I installed linux-lts, reconfigured GRUB, and created an initial ramdisk env,
# pacman -S linux-lts
# grub-mkconfig -o /boot/grub/grub.cfg
# mkinitcpio -p linux-lts
I'm able to load the linux-lts kernel from rEFInd (dual booting with MacOS), but I get the error:
Warning: /lib/modules/3.14.17-1-lts/modules.devname not found - ignoring
ERROR: device "UUID=df842c36-41f7-4606-b219-7879cf1c4825" not found
ERROR: Unable to find root device "UUID=df842c36-41f7-4606-b219-7879cf1c4825"
and am dropped into a recovery shell.
However,
% ll /lib/modules/3.14.17-1-lts/modules.devname ~
-rw-r--r-- 1 root root 411 Aug 26 13:20 /lib/modules/3.14.17-1-lts/modules.devname
so at least the file exists.
Here's the specific lines from grub.cfg pertaining to linux-lts :
# grep linux-lts /boot/grub/grub.cfg
linux /boot/vmlinuz-linux-lts root=UUID=df842c36-41f7-4606-b219-7879cf1c4825 rw quiet systemd.show_status=0
initrd /boot/initramfs-linux-lts.img
menuentry 'Arch Linux, with Linux linux-lts' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-lts-advanced-df842c36-41f7-4606-b219-7879cf1c4825' {
echo 'Loading Linux linux-lts ...'
linux /boot/vmlinuz-linux-lts root=UUID=df842c36-41f7-4606-b219-7879cf1c4825 rw quiet systemd.show_status=0
initrd /boot/initramfs-linux-lts.img
menuentry 'Arch Linux, with Linux linux-lts (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-lts-fallback-df842c36-41f7-4606-b219-7879cf1c4825' {
echo 'Loading Linux linux-lts ...'
linux /boot/vmlinuz-linux-lts root=UUID=df842c36-41f7-4606-b219-7879cf1c4825 rw quiet systemd.show_status=0
initrd /boot/initramfs-linux-lts-fallback.img
and here is the complete grub.cfg
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 df842c36-41f7-4606-b219-7879cf1c4825
else
search --no-floppy --fs-uuid --set=root df842c36-41f7-4606-b219-7879cf1c4825
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_input console
terminal_output gfxterm
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-df842c36-41f7-4606-b219-7879cf1c4825' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 df842c36-41f7-4606-b219-7879cf1c4825
else
search --no-floppy --fs-uuid --set=root df842c36-41f7-4606-b219-7879cf1c4825
fi
echo 'Loading Linux linux-lts ...'
linux /boot/vmlinuz-linux-lts root=UUID=df842c36-41f7-4606-b219-7879cf1c4825 rw quiet systemd.show_status=0
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-lts.img
submenu 'Advanced options for Arch Linux' $menuentry_id_option 'gnulinux-advanced-df842c36-41f7-4606-b219-7879cf1c4825' {
menuentry 'Arch Linux, with Linux linux-lts' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-lts-advanced-df842c36-41f7-4606-b219-7879cf1c4825' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 df842c36-41f7-4606-b219-7879cf1c4825
else
search --no-floppy --fs-uuid --set=root df842c36-41f7-4606-b219-7879cf1c4825
fi
echo 'Loading Linux linux-lts ...'
linux /boot/vmlinuz-linux-lts root=UUID=df842c36-41f7-4606-b219-7879cf1c4825 rw quiet systemd.show_status=0
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-lts.img
menuentry 'Arch Linux, with Linux linux-lts (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-lts-fallback-df842c36-41f7-4606-b219-7879cf1c4825' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 df842c36-41f7-4606-b219-7879cf1c4825
else
search --no-floppy --fs-uuid --set=root df842c36-41f7-4606-b219-7879cf1c4825
fi
echo 'Loading Linux linux-lts ...'
linux /boot/vmlinuz-linux-lts root=UUID=df842c36-41f7-4606-b219-7879cf1c4825 rw quiet systemd.show_status=0
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-lts-fallback.img
menuentry 'Arch Linux, with Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-df842c36-41f7-4606-b219-7879cf1c4825' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 df842c36-41f7-4606-b219-7879cf1c4825
else
search --no-floppy --fs-uuid --set=root df842c36-41f7-4606-b219-7879cf1c4825
fi
echo 'Loading Linux linux ...'
linux /boot/vmlinuz-linux root=UUID=df842c36-41f7-4606-b219-7879cf1c4825 rw quiet systemd.show_status=0
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-df842c36-41f7-4606-b219-7879cf1c4825' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 df842c36-41f7-4606-b219-7879cf1c4825
else
search --no-floppy --fs-uuid --set=root df842c36-41f7-4606-b219-7879cf1c4825
fi
echo 'Loading Linux linux ...'
linux /boot/vmlinuz-linux root=UUID=df842c36-41f7-4606-b219-7879cf1c4825 rw quiet systemd.show_status=0
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/60_memtest86+ ###
### END /etc/grub.d/60_memtest86+ ###
and fstab:
% cat /etc/fstab ~
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda4
UUID=df842c36-41f7-4606-b219-7879cf1c4825 / ext4 rw,relatime,data=ordered 0 1
# /dev/sda5
UUID=0a37147c-f87b-4c2c-9b2d-75c852568c4b /home ext4 rw,relatime,data=ordered 0 2
Found a few things about 30 things on the net, this, but by my reckoning, it is not similar enough / I don't understand the solution enough to be comfortable applying it to my set up. Tried that, it didn't work. Seems like every issue that manifests itself in this way (esp in dual boot situations) has a different solution, ranging from blacklisting certain modules in /etc/default/grub to reording the block and autodetect hooks in mkinitcpio.conf.
Any help troubleshooting this would be greatly appreciated.
Also, here is mkinitcpio.conf (sans comments):
# vim:set ft=sh
# MODULES
MODULES=""
# BINARIES
BINARIES=""
# FILES
FILES=""
# HOOKS
HOOKS="base udev block autodetect modconf filesystems keyboard fsck usbinput"
Last edited by oktorok (2014-11-04 02:29:08)Is the root filesystem encrypted by default? I would like to try a solution like adding
cryptdevice=device:dmname
to my /etc/default/grub but I don't know what to put for dmname. It seems like the wiki suggests stating it verbatum,
dmname is the device-mapper name given to the device after decryption, which will be available as /dev/mapper/dmname.
I tried
GRUB_CMDLINE_LINUX="cryptdevice=/dev/sda4:/dev/mapper/dmname"
without success. This solution doesn't make sense if the filesystem is not encrypted.
I don't really think this applies, but I can't understand why the modules.devname would not be found when it plainly exists exactly where the system is looking for it.
In the meantime I'm trying
sudo mkinitcpio -k 3.14.17-1-lts -g /boot/initramfs-linux-lts.img -S autodetect
to set up the initial ram env, per this thread.
[update] the above method, referenced in the link, did not fix the issue.
Last edited by oktorok (2014-08-28 22:24:43) -
CS2 Unable to find file errors
Hi
We are having trouble with photoshop cs2. We can not open most files. Tiff, PSD, some PDF files will give an "unable to find file error". Jpg files, and certain PDF files and TIFF files that use jpg compression work. I have tried resetting all the settings, changing scratch disks / memory usage, uninstalling all fonts, and reinstalling the application and the problem persists.
Also i do not know if this is related but the same time we started having errors in photoshop we also have problems in Microsoft Word. The font list shows a lot of fonts as just a white box. Other apps can use the fonts fine. Just not in word.
I have attatched a JPG file with screen caps of the errors.I reset the options by doing the hold shift alt ctrl while starting up photoshop. Also i deleted all the preference files out of the application data\adobe\photoshop folder. Same problem persists.
Also another issue i have noticed. Say you perform an action like erasing somthing, or changing the brightness/contrast. You can not see the changes until you click on a different tool. Then it updates the display.
I will try and locate the faq and see what it says. -
Unable to find resource error after transport
Hello,
there is a strange error happening with some mapping after transporting the content of some namespaces from Dev to Q using file (client) export import.
We already tried the scenario successul on Q, but after some reimports of changes (which still work on Dev) we get the following error in the "request message mapping" step:
"RESOURCE_NOT_FOUIND"
Unable to find resource .............. in the following software component versions: ........
However the mapping is there and can be tested. Any idea on this?But last time one day later the scenario was running fine. Could that really be a problem with cache update?
If all the required objects are present in the QA environment and are active....then yes it can be a problem with the Cache.
I hope that no error was encountered (or import was done properly) during the import/ reimport.
Regards,
Abhishek. -
Trying to download driver for printer but unable to find device on wireless network
I was having trouble printing from my Macbook Pro to my HP Photosmart 5510 printer, so removed the printer and then tried to re-install the driver from the HP site. I go through the process but then my mac is unable to find the printer - the circle keeps going round trying to find it - but no luck. I have turned the printer on and off but no joy. Help please - thanks
Hi 2011tigger,
I would like to help you get your printer and MAc communicating again. The following document contains information about the possible causes of a lost wireless connection, tips for avoiding the issue, and troubleshooting steps to help you restore the wireless connection on your printer; Printer Does Not Maintain Wireless Connection.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
Jdeveloper remote debugging - Unable to find source error message
Hi,
I am trying to remote debug a simple Java application (non-web) using Jdeveloper. The Jdev debugger can connect to the remote debuggee, but unfortunately it throws me a message saying: 'Unable to find source file'. As a result, if I ignore this message, it simply ignores my source breakpoints.
Can anybody please help with any tips?
My project source is checked out from CVS and does not follow a conventional source path as such.
Thanks,
Neil.The warranty entitles you to complimentary phone support for the first 90 days of ownership.
-
Windows Media player can't find device/ error number C00D1179 - F
This is a fix for the error where windows recognizes and installs the Creative Zen Micro running the version 2.X firmware (or any other MTP device) but neither windows media or creative's software can see it.
How I got this error to begin with...
I had to replace my zen micro because of a headphone jack problem that seems to be very common. It still amazes me that a company that obviously invested tons of money into developing a device like this would let something as stupid as a poorly designed headphone jack ruin it... When I tried to sync my new zen micro I exchanged for at the store, it recognized the initial device firmware. I upgraded to the 2.X firmware and it worked until the device rebooted with the new firmare. At this point, the firmware program couldn't see it even though windows had given me the whole "New Hardware Found" thing and asked me if i wanted to sync with WMP. No other programs could find it either. I tried numerous things to get it to work, but here is what finally worked. This may not fix all the issues of this type but I suspect it will fix most of them.
As this problem is Microsoft's and not Creatives, any device running PlaysForSure (I think "plays if your really lucky" is a better name) I looked at other device forums. I found this post that got me looking in the right place.
http://www.misticri'ver.net/boards/archi've/index.php/t-3598.html
Step six said to look at the following registry entry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum
This made me look more carefully and realize that I had four Creative Zen Micro entries, confusing my computer into not syncing. The solution is below:
***WARNING- EDITING THE REGISTRY CAN REALLY SCREW UP YOUR COMPUTER!! USE AT YOUR OWN RISK!!!
. Unplug the device
2. Open Regedit by Start -> run, regedit
3. Browse to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\U SB
4. You will see a bunch of folders with incoherent letters and numbers. Expand these once to see another unreadable folder. When you click on this, you'll see a FriendlyName field on the right side. If it says Creative Zen Micro or whatever your device is, delete the higher level incoherent folder, it should start with VID.
5. Plug your device back in and let it reinstall
6. Hopefully it will say docked when you open windows media player
This may not fix all problems of this nature. If it doesn't, look at the link in the earlier part of this post.
BTW, Creative support, we aren't all idiots who don't realize that we don't have WMP0 installed. If we tell you it worked before and stopped working now, and also included a microsoft debug file clearly showing that there is something very strange going on, don't send us a stupid thing to check like whether WMP0 is installed and make us wait 24 hours for the next useless response.Interesting. Thanks for the information!
-
Unable to find file error while loading data from text file to Oracle
Hi,
I am having a interface where i am loading a data of Text file to Oracle.
But when i am trying to do this i am getting following error.
ODI-1227: Task SrcSet0 (Loading) fails on the source FILE connection SAPMM.
Caused By: java.sql.SQLException: File not found: d:/mdb/#General.get_filename
at com.sunopsis.jdbc.driver.file.FileResultSet.<init>(FileResultSet.java:160)
at com.sunopsis.jdbc.driver.file.impl.commands.CommandSelect.execute(CommandSelect.java:57)
at com.sunopsis.jdbc.driver.file.CommandExecutor.executeCommand(CommandExecutor.java:33)
SAPMM is connection name.
I am using get_filename to get the filename and it is fetching correct value as the this variable refreshes in previous step of this interface.
KM used for loading is File to SQL
What would be cause of this error?
Thanks,
MaheshHi,
Did a testing and following are the result
I have
A> created package having steps like
1. Declaration of variable v_filename.
2. Refreshing variable v_filename.
3. Execution of Interface which gets the file name from v_filename and load into target table
Package executes successfully.
B> created package having steps like
1. Declaration of variable v_filename.
2. Refreshing variable v_filename.
3. Scenario of Interface which gets the file name from v_filename and load into target table
Package executes with erre as it is not able to find the file
C> created package having steps like
1. Declaration of variable v_filename.
2. Refreshing variable v_filename.
3. Execution of Interface which gets the file name from v_filename and load into target table
4. Now create a scenario of the package , use the generated scenario in another package say main_package
Execution of main_package is successful.
Thanks,
Sutirtha -
hi all
need help to solve this problem
In a file called AllBalancedOfSize.java write a method with the signature:
public void printBalanced(int len)
that uses recursion (either directly or indirectly) and prints all balanced strings, composed solely of the characters a and b of length len in lexical (dictionary) order. A balanced string is a string with an equal number of a and b characters. So, for example, abab is a balanced string and bbab is not a balanced string.
As an example, the call printBalanced(4) must print:
aabb
abab
abba
baab
baba
bbaa
A call printBalanced(5) must print nothing because there are no balanced strings of length 5 (same for any odd parameter value). A call printBalanced(0) must print an empty line because there is one balance string of length zero, the empty string! You may assume that len is always greater than or equal to zero.
i have done this
public class AllBalancedOfSize {
public static void main(String[] args) {
AllBalancedOfSize q4 = new AllBalancedOfSize();
q4.printBalanced(4);
public void printBalanced(int len) {
if (len == 0) {
System.out.println();
} else {
if (len % 2 == 0)
printBalanced(len, "");
public void printBalanced(int len, String prefix) {
if (len == 0) {
int numofa = 0, numofb = 0;
for (int i = 0; i <= prefix.length(); i++) {
char tmp = prefix.charAt(i);
if (tmp == 'a') {
numofa++;
} else {
numofb++;
if (numofa == numofb) {
System.out.println(prefix);
} else {
printBalanced(len - 1, prefix + "a");
printBalanced(len - 1, prefix + "b");
}but i got this from compiler
Exception in thread "main" java.lang.StringIndexOutOfBoundsException: String index out of range: 4
at java.lang.String.charAt(String.java:687)
at AllBalancedOfSize.printBalanced(AllBalancedOfSize.java:20)
at AllBalancedOfSize.printBalanced(AllBalancedOfSize.java:31)
at AllBalancedOfSize.printBalanced(AllBalancedOfSize.java:31)
at AllBalancedOfSize.printBalanced(AllBalancedOfSize.java:31)
at AllBalancedOfSize.printBalanced(AllBalancedOfSize.java:31)
at AllBalancedOfSize.printBalanced(AllBalancedOfSize.java:12)
at AllBalancedOfSize.main(AllBalancedOfSize.java:4)
need help to find out what is the error.
Edited by: dttl on May 10, 2009 11:44 AMdttl wrote:
Exception in thread "main" java.lang.StringIndexOutOfBoundsException: String index out of range: 4
at java.lang.String.charAt(String.java:687)
need help to find out what is the error.When a String has a length of 4 characters, you can access them though indexes 0 through 3.
When a String has a length of N characters, you can access them though indexes 0 through N-1. -
Photosmart 6520--Unable to Find Printer error
I just purchased a HP Photosmart 6520 printer. I installed the software onto my computer; however, I am unable to complete the set up due to receiving the error message that the printer cannot be found. I entered the IP address as indicated on the printer and uninstalled/reinstalled the software, to no avail. If it cannot be fixed, I will have to return the printer.
I figured out the problem. It was my firewall on my computer!
-
Officejet 4620 Can't find device error msg
I can't get my 4622 officejet to print via the network. Light is on - blue - connection excellent but when I try to print I get an error. When try to go thru set up it says cannot establish 2way connection. I suspect maybe firewall issue, but don't know how to circumvent. Tried to print using usb, that does not work either. Tried to send email to Eprint and got SPAM message, but was able to print to Eprint from another email address. This is so odd, amd at a total loss at this point.
This question was solved.
View Solution.Hey @LS1917 ,
Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.
I understand you are experiencing some issues with your printer communicating over the network.
I would like for you to take some time and power cycle your wireless router, your printer as well as your computer and try to complete your functions again.
What Operating System are you using? Press the link to find out, in case you don't know already. http://whatsmyos.com/
After you let me know the operating system you are using, and after you try the power cycling instructions, get back me with the results and we can continue trying to figure the issue out for you. Look forward to hearing back from you.
I worked for HP. -
ULTRASEARCH UNABLE TO FIND INSTANCE ERROR WKG-10602
Hello,
We are attempting to configure UltraSearch. When accessing the URL, http://ipims.sbec.com/ultrasearch/query/search.jsp, I receive this error message within the browser: java.sql.SQLException: ORA-20000: Oracle Ultra
Search error WKG-10602: Instance does not exist ORA-06512: at "WKSYS.WK_ERR", line 179 ORA-06512: at line 1
When I look at the log file under opmn, I receive these errors:
java.sql.SQLException: ORA-20000: Oracle Ultra Search error WKG-10602: Instance does not exist ORA-06512: at "WKSYS.WK_ERR", line 179 ORA-06512: at line 1
java.sql.SQLException: ORA-20000: Oracle Ultra Search errorWKG-10602: Instance does not exist ORA-06512: at "WKSYS.WK_ERR", line 179 ORA-06512: at line 1
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:185)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:241)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7 TTC7Protocol.java:1477)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:888)
at oracle.jdbc.driver.OracleStatement.executeNonQueryOracleStatement.java:1960)
at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1880)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2490)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:435)
at
oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:500)
at
oracle.ultrasearch.query.InstanceMetaData.refresh(InstanceMetaData.java:485)
at oracle.ultrasearch.query.Instance.getMetaData(Instance.java:328)
at search.jspService(_search.java:1621)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at
com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:66)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at
com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:539)
at
com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:285)
at
com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:771)
at
com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:152)
at
com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:72)
at
EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:802)
at java.lang.Thread.run(Thread.java:484)
Can anyone help me decipher this error?
Thanks!Hi,
This problem is due to either invalid XML being used as payload/XSD (in a zip) has not been uploaded properly.
Please validate the document against XSD by using any XML editor. Please make sure to upload all the XSD bundled in a zip file and mention the complete path of the main Xsd in Starting XSD File Path as part of document definition.
Regards,
Anuj -
SIP Trunk error, Warning: 399 "Unable to find a device handler
Hi Guys,
I am new at this, but I am having some issues with connectivity over a SIP Trunk. By the way I am not sure if this is the right area to post this, but here we go. I have two CUCM 8.x cluster and I have a SIP trunk that connectes them both, at each end I have a Cisco 2900 series gateway with MGCP protocol. When I make an inbound call " lets say from side A to side B it failed", in the CCM trace I can see the following error " Warning: 399 Unable to find device handler for the request received on port 5060 from".
I would appreciate some help on this, I am not sure what to look for......Hi,
For testing reasons can you do the following
Create a callmanager group that contains all the nodes in the cluster. Then create a device pool with this callmanager group and assign this device pool to the SIP trunks.
Do this on both cluster.
Reset the trunks and see if you still have ny problems.
Thanks!
Christos -
AIR 17 iOS - Unable to enumerate devices.
Hi,
with the latest AIR 17 SDK I'm getting a "Unable to enumerate devices" error with adt.
AIR version 16 Build 283 actually works fine.
Windows 7 64-Bit
iTunes 12.1.1.4i am the same problem.. Air 16 is work. But. Latest itunes with beta 17 is not find device
win 7 64bit.sp1...... Flash cc 14.2.0.20 ..... Air beta 17.0.0.123......iTunes 12.1.1.4.....ipad air 2 md796kh/a iOS 8.1.3
and display list
and make button ........error...... not found iTunes mobile device library...but display device -
Error: "Unable to find a working IR device" in Windows Vista 64-bit, Audigy 4
I have Audigy 4 Pro with the RM-500 remote that came with it.
The remote is not working in Vista 64-bit (Enterprise).
It is definitely not a hardware problem because everything works in Windows XP Professional SP3. When I dual boot into Vista, the remote doesn't control anything in Windows but the red light on the I/O external box is blinking so it's definitely receiving input.
When I run "Entertainment Center Settings", I get the error "Unable to find a working IR device" and all the options are greyed out.
<img title="err" width="300" style="width: 300px; height: 69px" src="http://img379.imageshack.us/img379/238/2278203yd.jpg" height="69" alt="err">
<img width="459" title="err2" style="width: 459px; height: 393px" src="http://img379.imageshack.us/img379/388/2850392ep2.jpg" height="393" alt="err2">
Has anyone gotten the remote working in Windows Vista 64-bit's? Thank you for your help.
Regards,
Lawrence_ I am having this exact same issue on vista business 32 bit. Everything else on the external box works perfectly fine, except the remote. The remote does work however with intelliremote, but I cannot justify paying the money for such simple functionality. Any fix on [email protected]
Maybe you are looking for
-
System requirments to install obiee 11g
Hi everyone, i want to install obiee 11g in my desktop and my system configuration is 2.4 GHz intel core to duo ram 4gb windows 7 ultimate
-
URL breaks when '&' appears in the link
I have this issue. I am using this code to send through email a URL <a href="mailto:?subject=YourSubject&body=http://myURL.url.com/<%=sDestUrl1%>">Click here to send this report</a> Now this variable sDestURL is pretty long and it contains so many '&
-
EHS - Synchronization error when trying to generate WWI accident report
Dear all, I have a problem with WWI accident reports. I have created an accident report template (from the example SOP template), released the template and assigned a generation variant to it. When I try to generate the accident report from CBIH82 Ed
-
I had the old version of Firefox and was invited to install this version when it had finished i went back on line only to find the button on the laptop mouse pad no longer scrolls down the page. I now have to drag it down with the bar at the side.
-
Pixma MX860 shows an error 9000
Cannon MS860 printer shows an error 9000 on screen, I followed Instruction to turn it off then back on and get the same error. The manual gives no help. Any suggestions from out there?