Unable to find disk 2. Installation cannot continue.

RDBMS Version: 9.2.0
Operating System and Version: Red Hat Linux release 9 (Shrike)
Unable to find disk 2. Installation cannot continue.
Hello, I have been trying to install Oracle 9i Release 2 into a Red Hat Linux release 9 (Shrike) machine with no success. The installer hangs with "Unable to find disk 2. Installation cannot continue." even if it is configured in the .rsp file the parameters that specify the path to the other disks.
In some posts I found here (in metalink) there were references to 2 different variable names: FROM_LOCATION_DISK2 or LOCATION_FOR_DISK2 and FROM_LOCATION_DISK3 or LOCATION_FOR_DISK3. Both were set. Parameter FROM_LOCATION_CD_LABEL were also set with value "orcl920" (from the disk.label) and the names of the directories where the install disks where extracted have names like Disk1, Disk2 and Disk3. (I saw in the documentation that if the parameters of the other disks, 2 and 3, were not set in the response file, the installer would look for directories named Disk2 and Disk3 in directories 2 or 3 levels above products.jar, which is located in a subdirectory of Disk1).
I know this is not a certified combination of OS+DB but it´s just a test DB and won´t be put in production and even this config won´t be put in production in any site but it´s strange that a certification problem could raise an error in this level (what I would expect are linking and dependencies errors and not the impossibility of finding the install disks that are in the same file system and even specified by the parameters).
Is there another way to specify the location of these disks? Through a comand line parameter of the installer, for example, an enviroment variable or even other parameters in different files....
Thanks in advance.
Mauricio.

Errors "Exit Code: 6," "Exit Code: 7"
Mylenium

Similar Messages

  • I can't update my itunes and it shows me this message: The installer has insufficient privileges to access this directory: C:/program files/itunes. The installation cannot continue. Log on as administrator or contact your system administrator

    i can't update my itunes and it shows me this message: The installer has insufficient privileges to access this directory: C:/program files/itunes. The installation cannot continue. Log on as administrator or contact your system administrator

    Hello PamelaFox14,
    Thank you for using Apple Support Communities.
    It sounds like you need to log in as the administrator to update the iTunes application properly.
    Take a look at this article named:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    This section in particular:
    1. Make sure you have administrator account access
    To install iTunes or QuickTime software, you need to be logged in as an administrator on the computer. If you're not sure if you have administrator account access, you may find this Microsoft article helpful:
    Windows 7: How do I log on as an administrator?
    Otherwise, refer to the Help documentation from Microsoft, contact your IT department, or visitsupport.microsoft.com for more information.
    All the best,
    Sterling

  • During deployment :windows installation cannot continue because a required driver could not be installed

    During a deployment from wds i get the following error with windows 8.1 "windows installation cannot continue because
    a required driver could not be installed".
    Hardware : Gigabyte GA-Q77M-D2H.
    I got image from installation Disc.
    When the error occors this is the event in the admin-log on server 2008R2
    The following WDS Client has encountered Fatal Error: 
    SessionGuid: {01208fe1-bb0c-49d6-9e32-0000da4897af}
    MAC: 000C29D627F6
    IP: 192.168.208.86
    ClientGuid: {2f904d56-a52b-3220-a351-79ecd5d627f6}
    Arch: 9
    ErrorMessage: Windows installation cannot continue because a required driver could not be installed.
    What to do?
    Thank you in advance.

    Hi,
    The problem is a unsuccesful installation of driver in the driverstore, the first step would be to ensure that you are using the latest driver for the hardware and operating system or you’re experiencing
    compatibility issues with a driver.
    Then I suggest pressing shift+f10, and type diskpart then lisk disk, view whether all disks work fine.
    Regards,
    Yolanda
    Yolanda
    TechNet Community Support

  • Trying to download ITunes latest version on my Windows XP and I get this message "The installer has insufficient privileges to access this directory: C:\Program Files\ITunes.  The installation cannot continue. HELP!!

    Trying to download ITunes latest version on my Windows XP and I get this message:  "The installer has insufficient privileges to access this directory: C:\Program Files\ITunes.  The installation cannot continue.  Log on as administrator or contact your system administrator."  HELP?

    Hello PamelaFox14,
    Thank you for using Apple Support Communities.
    It sounds like you need to log in as the administrator to update the iTunes application properly.
    Take a look at this article named:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    This section in particular:
    1. Make sure you have administrator account access
    To install iTunes or QuickTime software, you need to be logged in as an administrator on the computer. If you're not sure if you have administrator account access, you may find this Microsoft article helpful:
    Windows 7: How do I log on as an administrator?
    Otherwise, refer to the Help documentation from Microsoft, contact your IT department, or visitsupport.microsoft.com for more information.
    All the best,
    Sterling

  • I tried to reinstall itunes, in the middle of the installing process i get the message "The installer has insufficient priviliges to access this directory:C\ProgramFiles [x86]\iTunes. Installation cannot continue.Log on as Administrator or contact your sy

    I tried to reinstall Itunes so i can have my computer interact with my iPod Classic.I uninstalled all the previous programs per apple's instructions.Part way during the reinstallation an error message comes up: The installer has insufficient priviliges to access this directory: C\ProgramFiles[x86]\iTunes.
    Installer cannot continue.Log on as administrator or contact your system administrator.
    I am the administrator on this HP computer.

    Hello PamelaFox14,
    Thank you for using Apple Support Communities.
    It sounds like you need to log in as the administrator to update the iTunes application properly.
    Take a look at this article named:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    This section in particular:
    1. Make sure you have administrator account access
    To install iTunes or QuickTime software, you need to be logged in as an administrator on the computer. If you're not sure if you have administrator account access, you may find this Microsoft article helpful:
    Windows 7: How do I log on as an administrator?
    Otherwise, refer to the Help documentation from Microsoft, contact your IT department, or visitsupport.microsoft.com for more information.
    All the best,
    Sterling

  • INS0003 OWB Repository Installation cannot continue without DBA privileges

    Hi:
    I´ve installed oracle database 10120 and today installed oracle warehouse builder 10.1, the installation haven´t problems, but when i try to execute OWB Repository Assistant i have the follow message error:
    INS0003 OWB Repository Installation cannot continue without DBA privileges
    If i connect me to OEM and check the privileges for sys or system user don't have any problem if i connect me as sysdba.
    I created a new user with all privileges and the error is the same.
    How could i fix my problem?
    Thanks for your help.
    Alex.

    This issue is normally caused because you have not setup sys to connect as sysdba per newer database setup procedures, test with connect "/ as sysdba" in sql*plus.
    If you cannot connect from SQLPlus by just the '/ as sysdba' login, then check the Note 50507.1 via Metalink as this describes the different ways you can connect to Oracle as an
    administrative user.
    Hope this helps,
    Keith
    Product Management
    Oracle Warehouse Builder

  • Photoshop cc: installation cannot continue until Bridge is closed.

    cannot install photoshop cc. erroe message says bridge needs to close. bridge is not open

    Bridge is running in the background. You're just not aware of it.
    It starts at login when you have Edit > Preferences > Advanced, Start Bridge at Login checked.
    Close bridge.exe via the Task Manager.
    See http://helpx.adobe.com/creative-suite/kb/error-installation-cannot-continue-bridge.html

  • 1.5 plugin installer cannot continue because files unavailable

    My applet wants to use any 1.5 plugin with
    codebase = "http://java.sun.com/update/1.5.0/jinstall-1_5-windows-i586.cab#Version=1,5,0,0" .
    But after downloaded the 1.5 plugin successfully and install begins, I get this popup error (that I cannot cut and paste, so anonyingly I'll type in manually):
    Error - Java(TM) Installer
    "This installer cannot continue because the files necessary for installation are unavailable. If trying to install a beta or older version, please check http://java.sun.com/j2se to deterimine if it is still supported. If so, please try installing at a later time, as these files might be only temporarily unavailable."
    I tried to to this plugin install over several days, as of Feb 20, 2005, it is still error popup and NO GO. So my applet is unusable for people who have no 1.5 plugin.
    By the way, this installer worked a week ago.
    Anyone has similar problem?

    Thank you. You are right. The error was actually produced by j2EE 5.0's htmlConverter.exe that
    errorneously produced "1.5.0/jinstall-1_5-windows-i586.cab"
    instead of "1.5.0/jinstall-1_5_0-windows-i586.cab".

  • AX Installation cannot continue.....

    I have a PC and I just purchased an AX and setup of my AX failed. I received an air message saying "a later version of iTunes is already on this machine. Installation cannot continue." HELP!!!

    Bridge is running in the background. You're just not aware of it.
    It starts at login when you have Edit > Preferences > Advanced, Start Bridge at Login checked.
    Close bridge.exe via the Task Manager.
    See http://helpx.adobe.com/creative-suite/kb/error-installation-cannot-continue-bridge.html

  • Access 2013 Installation - Cannot continue unable to download a required file

    We have working installations of office 2013 - Home and Business on two machines and we are trying to install Access 2013.
    Both machines are running Windows 8.1
    We have purchased 2 standalone physical media of Access 2013 to install on the machines.
    We place the disks in the drive and get a small indicator that the disk are being read and then nothing.
    We tried running  \office\setup32.exe -v (we have 32bit office version already installed) and get message saying. "we're sorry, we can't continue because we weren't able to download a required file. "
    We are  connected to internet and i have tried disabling the firewall and antivirus but get nowhere. I do not wish to uninstall office unless i absolutely have to. Any suggestions please.

    Are these machines on a domain?
    It my be possible that your WSUS does not have the files available. If so add those files to the update library or remove the machines from the domain, install and then re-add to domain
    *which is not recommended but is a possible solution if nothing else is available 

  • Windows 8.1 WDS Installation cannot continue because a required driver could not be installed.

    When i try to deploy a custom Windows 8.1 Pro Image Via WDS I get the above error. I have enabled Client side logging and checked WDS logs and install logs on the failed installation (Shift+F10). I don't think the issue is a matter of the drivers that are
    included in the boot image. If it were a network card issue i would not be able to get the WINPE on the network and start the install. Second i don't think its a storage driver issue, WINPE has formatted the Drive as one may see in  (Shift F10) DISKPART.
    If it were a storage driver, it would not see the drive and would not format. I am starting to thing that this may be a Windows 8/8.1 Kernel issue that i have found referenced in other forums.
    That Said, I still injected my drivers into WDS then into my boot image, i was unable to do some drivers that were unsigned in WDS so i added them in DISM directly to the images. I forced the unsigned drivers so they could be added. I injected the drivers into
    my install and boot image. and still nothing. I then went back and removed, via DISM, all third party drivers from my boot and install image and it's still giving me the error. Help!!!!!!!!!!!!!
    I can upload logs if needed. 

    Hi wkingswt,
    In addition, please confirm image file source, prevent capturing yourself or got from faulty image or installation media.
    please make sure using right version Windows PE, extract Windows PE from Windows 8.1 installation media.
    Check following precautions
    First Signed device drivers are a key security feature in Windows. Drivers that are installed on x64-based computers must have a digital signature. If you're adding multiple drivers, you should create separate folders for each driver or driver category.
    This makes sure that there are no conflicts when you add drivers that have the same file name.
    Also, as a workarround Adding Device Drivers to an Offline Windows Image also is an option.
    You could find setup logs from the client computer by referring to following article, and see which driver failed to install.
    http://support.microsoft.com/kb/936625/en-us
    Regards

  • Unable to find disk

    I keep trying to sync my Iphone with my Itunes and it keeps coming up with "disk was not found" and it wont sync. I have no clue what that means or how to fix it.I have uninstalled and reinstalled Itunes even though I had the newest version. I have restored my iphone twice. i have deleted songs that may have stopped it. but It doesn't even try to sync just automatically says that it can't find the disk. HELP please!!!

    In case you have still not managed to resolve this, the problem lies with those disks not being "raw". If you look at the output of blkid that you have posted, you will notice that those asm disks have a EXT2 filesystem created on them, which makes them not eligible to be asm disks. You may want to wipe out those partitions and try again. Once you have set your ASM discovery string correctly and defined UDEV rules properly, you should not be able to see those asm disks in the output of blkid command BEFORE you use them for any disk groups. After you create an ASM disk group using those disks, they will appear in the output of blkid with TYPE as oracleasm.
    Hope this helps.

  • The installer has insufficient privileges to access this directora\microsoft\windows\Startmenu\program\itunes the installation cannot continue log on as administrator or contact your system administor

    cant down load i Tunes on windows 7

    Try HiReception's suggestion from the following post:
    Re: I cannot update my iTunes with"error occurred while installing updates"

  • "The installer has insufficient privileges to access this directory: C:\ProgramData\Microsoft\Windows\StartMenu\Programs\iTunes. The installation cannot continue. Log on as administrator or contact your system administrator"... I am the administrator!!

    I am the administrator so I don't know what needs to be changed to fix this problem.

    Try HiReception's suggestion from the following post:
    Re: I cannot update my iTunes with"error occurred while installing updates"

  • Error 1303. The installer has insufficient privileges to access this directory: C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat. The installation cannot continue. Log on as an administrator or contact your system administrator.

    This is a desktop computer with Windows 8. Any help is appreciated.

    Well, did you log in as the administrator. Win 8.1 may also have an disabled Administrator account like Win 7 that you may have to activate, but in most cases it is not necessary. You should disable anti-virus during the install. From you login (as long as you are an administrator) you may be able to right click on the install file and say run as administrator.

Maybe you are looking for

  • Officejet Pro 8600 Premium won't print cardstock - error message of "out of paper" appears

    My printer won't print cardstock, the error message says "out of Paper".  I have tried 3 different types of cardstock and it won't accept any of them.  It will print on plain paper.  Is this machine defective?  HELP...URGENT I must be able to print c

  • Message text available in java using RFC function module

    Hello, I wrote a function module with the ABAP statement MESSAGE .... RAISING PARAMETER_ERROR The java developer gets the PARAMETER_ERROR but no message text. Is the any way (e.g. exception class) to get the message text also. Thanks

  • IPhoto 4.0.3 won't load after moving files in HD

    I moved some photo files around in my iphoto library on my HD. Then I went to open iPhoto and the photos won't load. It opens and says "loading photos" and the little wheel-thing just spins around. The pictures are still on my HD but won't load in iP

  • Dashboards to SWF export automation

    Hi All, When we click on export in dashboards then it will shows us as .SWF as option. Is there any way to automate this process? Means, there is one executable file which will pick up .XLF file from folder location and convert it into .SWF flash fil

  • Using "helper" table to populate 2 different columns in same table

    I have a table that contains two columns which use abbreviations that I would like to join to another "helper" table that expands on what these abbreviations mean. I would like to have my query show the full name for these abbreviations rather than t