Unable to find DTP from Process chain after SPS14

Hi BI-experts,
After applying SPS14 to our development and our test systems we are experiencing problems with our process chains. The latest problem is that after transporting one process chain (with dtp's) from dev to test the process chain states that the dtp does not exist in active version on test system. In the test system the process chain points to the wrong dtp technical name. The technical name it points to in test system is the techincal name of the DTP in development system. The dtp gets assigned a different name when transported to test, hence the reference to dtp is wrong in test.
I have tried the following:
- Reactivate the dtp on test- No success
- Deleting the dtp from test and transporting it and PC again - No
success
- Reactivating the PC and DTP on dev and transporting it again - No
sucess
Please help.

If anyone else experience this problem I can inform you that implementing note 1147587 solved it.

Similar Messages

Urgent Issue - Copy DTP and Process Chains in New Client Instance

We have created new client Instance ( CLNT 510 ) based on our present client ( CLNT 500 ).
We have all the process changes, application components from source system CLNT 500 and data ( both for master and transaction data ) in place for the CLNT 500.
Now we need to use the CLNT 510 for our futher development. RFC connection has been established.
Just want to know, do we need to create all the Application component trasfer , Transformation, DTP , Infopackages , Process chains again for the CLNT 510 data.
please help.
Thanks and Kind Regards,
Pratap Gade.

Hello Jr Roberto,
Hello Jr Roberto,
We have company implementing mutiple SAP Implementations in different countries.
Client for BW Dev is 400.
Source system for Client BWD :
ECC Client ERP Dev - 500 ( for Holland Implementation )
ECC Client EPR Dev - 510 ( for German Implementation - Instance of ECC 500)
We are completed with the Client 500 implementation.
We are starting the german implementation and they have created a intance of Holland ECC Dev client 500 for german implementation with german data.
Now they have setup 2 rfc connection in BWD 400.
Also finally when they move to QAS client they are going to integrate the data of the both countries into one client.
Presenlty I need to use ECC client 510 client for our german development.
We have around 40 SAP BI reports in our first implementation. and around 10 in our second implementation.
Just want to know, what are issues to be considered in loading master data ( will it overwrite the master data from the client 500, if i extract the master data from client 510 )...and all the other issues like can I copy all the process chains...etc from client ECC 500 to ECC 510, without creating all transformation, DTP , Infopackages to load all the master from client 510 again.
I need a broad understand on how to go about the development ...starting with Application Components transfer from source system Client 510 ....to report development. ( if possible using the already created objects....infopackages , DTP etc..)
your help would be really appricated Mr Roberto.
Thanks and Kind Regards,
Shekar.

Execute Process chain after infopackage run for a PC file

Hello all.
The scenario I need to solve is the following.
I have several files to be load to ODS from P users PC. I will do this with an info package. But after this load there are some more process that have to be run whoch are created in a process chain.
I would like to automate the execution of the precess chain right after the load from PC file is done.
Any sugestions?
Thanks and regards,

Hello Javier Alvarado,
If you use process chains, the automatically integrated processes are ignored and have to
be implemented using the process chain. If you schedule a specific process in a chain,
you support the automatic insertion of additional, relevant standard processes with the
consideration of such automatic actions.
For example, if you have selected the processing types Only PSA and Subsequently in
Data Targets in the InfoPackage from the tabstrip Processing, and you are using this
InfoPackage in a process chain, then the further processing into the data target does not
automatically happen. Instead, it only happens if the process Update PSA is scheduled in
the respective process chain after the loading process. Thus, the process chain
maintenance supports the automation in this case. In this way, you generate a process
variant for updating from the PSA in the chain when inserting the loading process with the
process types Only PSA and Subsequently in Data Targets automatically into a chain.
Well i am talking about 30B Version
Regards,
Mohan.

Calling r/3 program from process chain

Hi
I did the following steps to call r3 program from process chain :
Steps in R/3 system
1. Created a program which needs to be called from bw and at the end of the program i have calling 'RSPC_ABAP_FINISH' function module & passing the rfc id of bw system and bw process variant.
2. created a even in r/3 (please note that this is not there in bw)
3. Created a job and under start condiion selected 'after event' and mentioned the event created earlier. And under step1 enter the abap program to be executed
Steps in BW system :
1. Created a process chain
2. inserted a process type 'abap program' and selected the call mode 'Asynchronous' and under destination entered the RFC destination of R/3 system. Under scheduled program enterd the event name created in R/3
after executing above process chain, the abap program node is becoming green but the abap program is not getting executed in r/3 system. And also the process after the program node in process chain is not getting executed. The job which was created in r/3 still showing the released status
Kindly advice where i am wrong.
Thanks
RKS

any input

Process Chain after EVENT - More than once

Hi all, I would like to run a process chain after an event; everything works fine with the following model...
PC1 >>
     >> some processes
     >> EVENT TRIGGER
PC2 >>
     (after EVENT) runs ok after event ONLY if I SCHEDULE it
After succesfully run, I've tried to run again immediatly PC1 again and it runs ok, even triggers mentioned EVENT, but PC2 never runs again until I manually SCHEDULE it.
The answer is: how should I SCHEDULE the process chain PC2 so I'll "never" need again to SCHEDULE it when I want it to run after event triggered on PC1?
Hope you can help me.
Thanks a lot!
Bernardo

Hello,
Both process chains are separated. At the model I described, at the end of PC1 event is succesfully triggered. After event is triggered at PC1, PC2 triggers correctly due it is scheduled as "after event".
Everything works fine, then, if I trigger PC1 again it runs correctly; event is triggered succesfully but PC2 (that is scheduled as "after event") doesn't runs; this is because I haven't SCHEDULED it again (after the first succesfully run).
What I want is not schedule PC2 after a succesfully run. Is there any way to reach that purpose?
Thanks again!
Bernardo

Problem in process chain after upgrade

Hi,
We recently upgraded our sysetm to BI7.0 version.When I tried to run a process chain,it failed at the data load step.I tried to see the message but it is throwing an error like "object not persistent".so can somebody let me know what is the error here...
Thanks
Karthick

Hi Karthik
I assume variant(EXOR) has been used in another process chain which is inactive status, if we create Process Chain 'A' with variant (EXOR) and create another Process chain 'B 'with same variant(EXOR) and inactive status, PC 'A' doesn't execute though its in active status, it will work only when both process chains were in active status, please find in which process chain this variant has been used, remove/activate variant(EXOR) and execute your primary process chain, hope this will resolve your issue, please let me know if this doesn't resolve your issue
-DU

How to find out the process chain

Hi folks
Hope every one is doing good..!
in sm37 my job is running (ABAP program) which is in process chain, but i have to find out the process chain name..!
Could any one help me on this..!

hi,
in SM37 select the job status as active and execute it, in the next screen you will find only active jobs select your job (ABAP Program) click on step - > in th next screen put the cursor on the job -> select Goto option in menu bar click on variant it gives you the field names and desc like chain name, variant etc information.
Regards
Sankar

Can we call Function Module from Process Chain?

Hello experts,
I have a small question.
Can we call Function Module(SE37) from Process Chain?
If yes can you please provide some example link?
I m new to BI world.
regards

Hi,
Create one ABAP program and call the function module from that program. Check the link to know how to call a function module from an ABAP program.
http://help.sap.com/saphelp_wp/helpdata/en/d1/801edb454211d189710000e8322d00/content.htm
http://help.sap.com/saphelp_wp/helpdata/en/9f/db98ef35c111d1829f0000e829fbfe/content.htm
Then use process type "ABAP Program" in your process chain and add the program you have created. So then this program will be executed via process chain and this program will call the function module.
Indrashis

Alerts from Process chain to mobile

Hi Experts,
Can any one explain the pre-requisites for getting alerts to mobile from a process chain? We are working in a production environment BW3.5 where we are getting mails for failure or success from Process chain. Now we want to implement the SMS to mobile from Process chain.
Please give the pre-requisites. Surely points will be awarded.
Advance Thanks.
Regards
Siddhardh

Hi
Sending the SMS alerts are not supported with 3.5 as far my knowledge goes. But can try with WAS
Read 51 page.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b3b9b990-0201-0010-6d8f-e55f09e63bf7
Try this PDF also
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b6d59590-0201-0010-5f9d-adb9f6b14d80
Hope it helps
Edited by: Aduri on Jan 15, 2009 10:56 AM

Support Pack 13 - Unable to add InfoPackages to Process Chains

Hello
We are having an issue of being unable to add infopackages to process chains. We are at Stack 12 (SP13). Any one else encounter this? Please send suggestions.
Thanks,
Praveen

Hi,
We are having the same issue here at our client site. Any help is appreciated!
Thanks,
Doug

DSO activation step has been failing if i activate from process chain

Hello Frnds,
one of the DSO activation step is failing from process chain.
Problem : if i do the activation from PC then only it is failing
If i do the DSO activation manually then it is fine .
Kindly provide your suggestions on this issue.
Thanks & regards
Ravi

Hello Lavanya,
below are the logs for ur reference & process monitor is not genereated
log from Process Tab:
Cannot activate request 0000015877(REQU_4E3YPXSZ5F73H6ZNFZJYWMVJH) of DataStore object ZXXXX
Activation of M records from DataStore object ZOGSDRCA terminated
Job log:
Job started
Step 001 started (program RSPROCESS, variant &0000000015318, user ID ALEREMOTE)
Cannot activate request 0000015877(REQU_4E3YPXSZ5F73H6ZNFZJYWMVJH) of DataStore object ZOGSDRCA
Activation of M records from DataStore object ZOGSDRCA terminated
Cannot activate request 0000015877(REQU_4E3YPXSZ5F73H6ZNFZJYWMVJH) of DataStore object ZOGSDRCA
Activation of M records from DataStore object ZOGSDRCA terminated
Entire chain now has status 'A'
Process Activate DataStore Object Data, variant Activate Data ZOGSDREC has status Undefined (instance )
Process Generate Index, variant Generated from DROPINDEX ZDELETEREC_CAUSE_INDEX has status Undefined (instance )
Process Generate Index, variant Generated from DROPINDEX DELETE_INDEX_ZCGSDREC has status Undefined (instance )
Process Data Transfer Process, variant ZOGSDREC -> ZCGSDREC has status Undefined (instance )
Process Data Transfer Process, variant ZOGSDRCA -> ZCGSDRCA has status Undefined (instance )
Process Delete Index, variant Delete Reclamation causes' index has status Undefined (instance )
Process Delete Index, variant Delete index of ZCGSDREC Reclamations has status Undefined (instance )
Process Start Process, variant Start Reclamation delta load has status Completed (instance 4EQ978RV7JE1BU3MT2YB20A3X)
Process Execute InfoPackage, variant 2LIS_05_Q0NOTIF Delta has status Successfully completed (instance REQU_4EQTTCCMY2XEEPL99XGE9EECT)
Process Execute InfoPackage, variant 2LIS_05_Q0CAUSE Delta has status Successfully completed (instance REQU_4EQG4DHZ6JD3K5UZCR5WP16P9)
Process Data Transfer Process, variant 2LIS_05_Q0NOTIF / EQ2CLNT210 -> ZOGSDREC has status Undefined (instance DTPR_4EQ97CM4OU8SN3TPQ44G2ZMZX)
Process Generate Index, variant Generated from LOADING ZPAK_4BFDG83ZVZM4MDUC6L71H1 has status Successfully completed (instance INDX_4EQ97IDIWSIXM0EU3NVNMGOBX)
Process Activate DataStore Object Data, variant Generated from LOADING ZPAK_4BFDG83ZVZM4MDUC6L71H1 has status Ended with errors (instance ODSA_4EQG4KJGK99HMTOSPBB5WU0BX)
Job finished
Here i am giving process types sequence :
Infopackage -> Create index-> DSO activation.
does this create index is generating any issues ?
Regards
Ravi
Edited by: BIuser on Aug 10, 2009 1:13 PM
Edited by: BIuser on Aug 10, 2009 1:13 PM

DTP failure which was in process chain after transport

Hi,
I created a DTP in Development Server and it get transported to QA successfully.
I also created a Prcocess Chain that execute that DTP. When I tried to transport this Process Chain to QA, transport was sucess but when i check in QA process chain was not in active mode. its showing the error that DTP is not in active A version.
Error:Process variant DTP_LOAD DTP_4AEIYC0UV528F7W1JL587E7HR does not exist in version A
I checked the DTP in QA and I noticed that the DTP has been converted to a different technical name which is not the same as the one I transported from Development.
Example: DTP DTP_LOAD DTP_4AEIYC0UV528F7W1JL587E7HR in Dev is converted to DTP_4AN4TVDRYNSMT95UGI48JVC6J in QA.
Please advise how I can transport the Process Chain that call this DTP from dev to QA

Hi Sri,
You need to collect your DTP along with the Process chain in the same request. When you migrate DTPs from DEV to QA , a new DTP ID are generated in QA system and your DTP in the Process chain points to DEV's DTP and that is why you get this error. You can also find more information when you turn on the " Detail View On" from the menu. This will display technical name of all the objects in your process chain.
so recollect your DTPs and the process chains objects in the same transport request and migrated to QA ,this will Fix you issue.
Hope it helps,
Cheers,
Balaji

Issues in Process chain after Transporting to Q

Hi All
I have couple of issues with my process chain (in Q). We have recently upgraded from BW3.5 to BI7.0. After upgrade i have a change made to one of my Process chain. i have transported it successfully to Q system. I have collected all the related objects associated with the change in the transport. But when try to see the changes changes in the process chain in Q system i have the following issues.
1. i do not see my changes in display mode. But i am able to see all the changes if i go to change mode (this looks weird and i dont know why)
2. i am unable to schdule the process chain in Q system as i was able to do earlier. Now it is asking for Transport when i try to schedule the process chain. this was not the case earlier.
3. In the transport i also collected a newly created infopackage and added it to the Process chain. But i do not see any link between the infopackage and the process chain (it was supposed to have a link as it had in DEV), i mean when i go to infopackage it used to give me a mesage saying the infopackage is already available in Process chain which i got in DEV.
All the above cases were working per normal in DEV systems tested and were collected as required in the transports and moved to Q
Please let me know ASAP if any of you have encountered similar problems before and have solutions. i saw couple of related threads (some suggested to directly activate the process chain in Q system by opening the Q systems as an alternate) but could not find a solution
Any sort of help will be really appreciated
Thanks
HK

1. Display mode shows only the active version of Process chain. When you go into change mode, it displays the inactive version (if any available). Make sure you activate the process chain in the change mode. Then the chain you see in display and change mode will be in sync.
2. When you try to schedule, the Process chain will be activated as well. If your Q system is prompting for transport then probably the system is open for changes. If you want to modify process chains in Q and P systems, make appropriate Object Changeability settings in Transport connection in Q and P systems and make sure the system is closed for changes (SCC4).
3. Use Transport connection to collect the objects required for Process chain. After transport, check the transport log and make sure all the objects are imported successfully.
Regards,
Sree

Problem delete chang log from process chain BW 7.01

We have upgrade BW from 3.5 version to 7.01 version two month ago.
Now I realized that the process chain running one a week to delete PSA and change log don't work well after upgrade.
The process chain end without errors (status is green), but the change log are not deleted.
In the test system I try to delete the Change Log in 2 mode:
1-with the variant "Deletion of Requests from the Change Log " and the datastoreobject = myods and all the option (correct request, incorrect request and "Delete Activation Requests Only"). In the log i see this messagge
The following excluded selections will be processed:
No excluded selections found
The following included selectiosn will be processed:
Pattern: DataStore = 0FIGL_O06, InfoArea = *
The following reqeust selections were set:
Number of days = 0000000010, Successful = X, Incorrect = X, Curr. Requests =
The following change logs were selected:
2-with the variant "Deletion of Requests from PSA " and the datasource= 8myods and all the option (correct request, incorrect request). In the log i see this messagge
The following excluded selections will be processed:
No excluded selections found
The following included selectiosn will be processed:
Pattern: DS = 80FIGL_O06, LS = BWTCLNT100, IS = , AC =
The following reqeust selections were set:
Number of days = 0000000015, Successful = X, Incorrect = X, Load requests =
The following PSAs were selected:
In both case the change log is not deleted.
I can delete the change log only using Manage screen of my ods and then using Menu -> Environment ->Delete Change Log Data.
Anna Maria

I see that this topic is still active/unanswered...
We're having the same problem, but not just changelogs, also for PSAs. We have a weekly process chain that does housekeeping on our BW system, cleaning up PSAs and changelogs, compressing cubes, realigning time-dep masterdata and renewing indexes.
The PSA chain runs fine and about 90% of all PSAs get deleted, but there are some datasources (all of them are of type 8* datamart datasources) that don't get their PSAs deleted. It says "The following PSAs were selected:" and then nothing happens...
I tried all tickbox combinations and checked that there are no PSA entries blocked by invalid partitions. Manual deletion (via "manage" in the datasource) works fine, but is tedious and time consuming.
Also, most of the 8* datasource PSAs do get deleted. Just a handful (+/- 25) get skipped somehow.
Any ideas?
Thanks,
Eduard
PS: We're still running 3.5-style backend dataflow, but will eventually get converted to transformations and DTPs. But that's not on our agenda (yet).

Errors from Process chain

Dear Experts,
I have one meta chain with 2 local chains one is for master data once is for transaction data.
Transaction data local chain has failed due to following errors.
Could you please help me to resolve this.
Job started
Step 001 started (program RSPROCESS, variant &0000001440291, user ID ALEREMOTE)
Communication buffer deleted from previous run 4M74YB2O4QY50TOYO6PG3KAOW (status X)
A type "Complete Deletion of Data Target Contents" process cannot follow process "Execute InfoPackage" var.ZPAK_4BYBLNXAP09A746U1KQ26W9I
A type "Activate DataStore Object Data" process cannot precede process "Execute InfoPackage" var. ZPAK_4BYBSJFLNZRIDEVM2C5Q66W4F in the
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.ZPAK_4BYBWOKTTV9Z12IFD3M5EBYN3 in the chain
A type "Complete Deletion of Data Target Contents" process cannot follow process "Execute InfoPackage" var.ZPAK_4C8CLT6V6PANGNQHF6JK4ORO
Data saved successfully
No new deltas in DataStore object XYZ for update
No new deltas in DataStore object ABC for update
Chain Z_ABCDE was removed from scheduling
Chain changed! Scheduling in display mode not possible
Process did not report an instance -> no log
Job cancelled after system exception ERROR_MESSAGE
Regards,
Mannu

Hi,
Please check the sequence of steps in the process chain.
For MD chain, Attribute Change Run step needs to be included after the Data Load step.
Master loading ( Attr, Text, Hierarchies )
Steps :
1.Start
2. Execute Infopackage (say if you are loading 2 IO's just have them all parallel )
3.You might want to load in seq - Attributes - Texts - Hierarchies
4.And ( Connecting all Infopackages )
5.Attribute Change Run ( add all relevant IO's ).
For Trsansaction Data,
Steps
1. Start
2. Execute Infopackage ( loads till psa )
3.Execute DTP ( to load DSO from PSA )
4.Activate DSO
5.Further Processing
6.Delete Indexes for Cube
7.Execute DTP ( to load Cube from DSO )
8.Create Indexes for Cube
Thanks.

Unable to find DTP from Process chain after SPS14

Similar Messages

Maybe you are looking for