Unable to find HP 8610 during setup

Running Windows 7and I am just trying to set it up wirelessly. I have tried everything listed on the HP 8610's support page and still have had no luck. I have tried opening the IP that the printer is giving me in chrome and I get
Oops! Google Chrome could not connect to 192.168.2.11
Try reloading: 192.168.2.11
Thanks in advance

Hello there! Welcome to the forums @Woodya34
I am hoping to help you out with the connection issue you're having with your Officejet 8610.
First I would suggest power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer.
Try entering the printer's IP address in a web browser again to see if you can reach the embedded web server.
If you are still not connected, run the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue and tries to fix them for you and might connect the printer again. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results. Please take note of the results and let me know what they said.
If the connection issue still lingers, try restoring the network defaults on the printer and run the Wireless Setup Wizard again on the printer to connect to your network (make sure it's the same network the computer is connected to).
Select Setup Menu, Network Setup, Restore Network Defaults, Yes
Restart the printer
Select the Setup Menu, Network Setup, Wireless Setup Wizard
Run the Print and Scan Doctor again.
Let me know the results, good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

Unable o Find Oracle Weblogic Server setup for Win 2008 Server 64-Bit

Hi
Unable o Find Oracle Weblogic Server setup for Win 2008 Server 64-Bit machine.
Please provide the dowload links.
Thanks

Please follow this link for download and set requirements for installation of WebLogic 10.3 for Win 2008 Server 64bits:
http://download.oracle.com/docs/cd/E13196_01/platform/suppconfigs/configs/windows2008/win2008_103.html
best regards,
Thiago Leôncio

Hi, I am using my icloud on my iphone but am unable to find it on my mac book pro. It's not under my system preferences like it shows under the setup. Can I download it again? Or something. I just need to backup some files on my computer and am unable.

Hi, I am using my icloud on my iphone but am unable to find it on my mac book pro. It's not under my system preferences like it shows under the setup. Can I download it again? Or something. I just need to backup some files on my computer and am unable.

The minimum requirement for iCloud is Lion 10.7.5 (Mavericks preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is now non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
The requirements for Mountain Lion and Mavericks are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

Which version of OSX and what email provider are you using.

Setup Assistant unable to find base station

Ok I am new to wireless so here goes. I have a iMac G5 2.0 running 10.4. I just bought the base station today. I am trying to use dsl with PPPoE. I have checked those settings about a 100 times. The same settings and cable I am using to post here to this forum thru ethernet.
I plug in the base and when I get the flashing amber it is recognized in the internet connet app with a full signal strength. If I try to connect it tells me it cannot locate the server.
When I try the setup assist app and select 'Set up a new Airport Base Station' and hit continue. it immediately say it found a new Airport Express base station and includes the name. But when I hit continue again it takes a minute to think the brings up a error message. '...unable to find your base station.
I also come up empty with the Airport Admin utility. Nothing shows in it.
I hope someone can help. Thanks.
Jeffrey Dalton

Whether or not a sound system is plugged into the Airport Express has no influence on the generation of this error message by the Airport Setup Assistant.
I have a distinct feeling I'm going to be reiterating everything the people at Mac support told you to do (so it would be helpful to tell us at the start what you have tried thus far to solve the problem) but the next thing I would recommend is a factory default reset of the Airport Express per:
http://docs.info.apple.com/article.html?artnum=108044
The other thing that can cause all sorts of grief is any non-Apple firewall software you might have installed on this Mac - that includes firewalls, "internet protection" software, and VPN client software. The MacOS built in firewall is OK - but all this other baggage should either be disabled or uninstalled.

Unable to find Setup Wizard on my 8700

Having got a refurb 8700 BB so we can use with our customer's systems if necessary, I am unable to find the setup wizard to setup BIS, the phone is a 8700g and in Advanced Options it says Blackberry 4.1 system software.
I have confirmed with the carrier that i have got BIS activated, and have recieved applicatins like googletalk, Yahoo messenger etc, and can get on the internet, but have no option to setup emails.
Tried wiping the device but no luck.
Can somebody help?

1. Options > Advanced > Host Routing Table > Menu > Register.
2. Resend your service books from your carrier BIS site.
From your handheld device: http://www.blackberry.com/btsc/KB15402
From your desktop PC: http://www.blackberry.com/btsc/KB02830
3. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error in db setup "/usr/lib/hpux64/dld.so: Unable to find library 'libclnts

Dear all,
Whill installing sap 4.7 database instance in HPIA64 , i got error mes like
ERROR 2008-03-03 22:26:31
MUT-03010 Execution of the command "/sapmnt/C2P/exe/brconnect -u / -c -f crsyn -o SAPC2P" finished with status TST_ERROR.
cat brconnect.1.log
/usr/lib/hpux64/dld.so: Unable to find library 'libclntsh.so.10.1'.
Please let me what will be the problem .
Regards,
satich -k

Hi,
The SAP DBSL (dboraslib.so) will search for the Oracle client shared library in the following paths in this order of precedence:
On 64-Bit platforms:
a. /oracle/client/10x_64/instantclient
b. /oracle/client/10x_64/lib
c. /oracle/db_sw/10x_64/instantclient
d. /oracle/db_sw/10x_64/software/lib
On 32-Bit platforms:
a. /oracle/client/10x_32/instantclient
b. /oracle/client/10x_32/lib
c. /oracle/db_sw/10x_32/instantclient
d. /oracle/db_sw/10x_32/software/lib
If the client can't be found in the first path, then the second will be searched and so on. The instant client path is the same for Oracle Release 10.1 and 10.2. The path can only differ from 64 bit to 32 bit.
Thus, to solve your problem, create a dynamic link in the oracle client directory like this (for Unix 64-Bit):
cd /oracle/client/10x_64
ln -s /oracle/client/10x_64/lib lib
regards,
kaushal

Unable to find any national character set

please check your oracle installation...
and dbassist fails to load.... any idea?
ps I installed two languages English and italian from the "languages" option
Thanx for your help.
Take care
Renato Dall'Armi

I ran into the same problem that you have. Did you have a solution for it?
Regards
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Pui Endo ([email protected]):
I tried to launch DBAssist and create new database instance
after Oracle8i server installation. I was getting above the
error and it says "Unable to find any National Character Set.
Please check your Oracle installation.
I am using default character set (US). Is something wrong
happening in my server installation. Does Oracle prompt for
choosing character set during installation? I am not a DBA and
new to Oracle8i. I am try to setup Oracle since we don't have a
DBA. Anyhelp will be greatly appreciated. The Oracle is
running on Linux.
Thanks.<HR></BLOCKQUOTE>
null

GRUB unable to find file, fails to install

(FTP install via floppies, GRUB 0.96-1, installation via arch/setup utility)
GRUB fails to install, giving the error message "Error: unable to find file" after checking for a file in /boot/grub (grub.menu IIRC), and quitting without further action. Menu.1st is there, but GRUB seems to want something else.

There might be an issue relative to the used fs. I allways had problems if I tried to install grub into xfs or jfs partitions, and had to install lilo first during installation procedure. After first boot, I usually removed lilo and installed grub without any problems.

Unable to find Hotsync

Me again. I've recently upgraded computers (still running XP Professional), and using Laplink's PDASync 4 to synchronize my Palm m515 with Lotus Notes. Prior to the upgrade, I had been using both successfully. Now, when I try to do a full synchronization with PDASync, I get the following message: "Unable to find HotSync. Please restart HotSync. If this doesn't work, please reinstall HotSync and try again."
I have everything in (as far as I can tell) an identical confguration with the old computer. All applications are present and running. I have uninstalled and reinstalled both Palm Desktop and PDASync. I have even foudn an update for HotSync and installed it. However, I have not been able to run PDASync with HotSync.
I have communicated with Laplink's service and their best answer is that it sounds like it might be a security issue with Palm, but that makes little sense to me, when I amusing an identical setup and have not made any changes to the pda, but only the computer.
Can anyone here point me in a direction that can resolve this?
Thanks!
Post relates to: Palm m505

Hello,
I have exactly the same problem. I think it can me caused by the changes in some of the last security patches for windows xp pro that were applied in last days/weeks. I am also working in the corporate environment. I cannot influence what patches are being installed. I have found on the Internet hint regarding the right during installation and how is Palm Desktop and PAD sync installed. If it is installed by user administrator that is using the software or if it is installed by IT administrator and then used by another user, who no administration rights has. But I cannot prove it as I cannot get administrator rights to my PC. Maybe it can help.
Post relates to: Centro (AT&T)
Post relates to: Centro (AT&T)

SAPINST stops at command brconnect . Unable to find library libclntsh.sl

Unix HPUX PARISC with Oracle Db 10g (10.1.0.4)
Hi,
During install of SAP Netweaver 2004S SR1 Java, I encountered a problem on the Phase 17 of 25, Perform post-load activities.
Here is summary of post/pre steps :
     15 of 25 : Create secure store
     16 of 25 : Post load activities
     17 of 25 : perform post-load activisties (My issue)
     18 og 25 : Install SCS Instance
     19 of 25 : Install instance basics
Here the error message from the SAPINST log:
INFO 2007-12-03 13:40:18
Creating file /tmp/setupDir/brconnect.log.
INFO 2007-12-03 13:40:18
Output of /usr/sap/X01/SYS/exe/run/brconnect -u / -c -f chpass -o SYS -p XXXXXX is written to the logfile brconnect.log.
ERROR 2007-12-03 13:40:18
MUT-03010 Execution of the command "/usr/sap/X01/SYS/exe/run/brconnect -u / -c -f chpass -o SYS -p XXXXXX" finished with status TST_ERROR.
ERROR 2007-12-03 13:40:18
MUT-03010 Execution of the command "/usr/sap/X01/SYS/exe/run/brconnect -u / -c -f chpass -o SYS -p XXXXXX" finished with status TST_ERROR.
ERROR 2007-12-03 13:40:18
FCO-00011 The step setOraclePasswords with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_ORA|ind|ind|ind|ind|0|0|setOraclePasswords was executed with status ERROR .
Here is the brconnect.log
/usr/lib/pa20_64/dld.sl: Unable to find library 'libclntsh.sl.10.1'.
What is already done?
     - Run this command on a terminal session logged with orax01 user (brconnect -u / -c -f chpass -o SYS -p XXXXXX) -> result successfully
     - Check Oracle Home environment $ORACLE_HOME -> ORACLE_HOME=/oracle/X01/101_64
     - Re-Extract files from DBATL700*.SAR to /usr/sap/X01/SYS/exe/run
     - Check permission on /oracle/client/10x_64
Best Regards
Yves

Hi all,
Indeed variable Oracle Home was not set correctly.
I modified this value in some files in the setup dir but this modification have to be done ALSO in some files into home directory of user : oraSID and SIDadm.
Thanks for your efficient remark.
See you soon
Yves

'unable to find product oracle.swd.jre[1.3.1,1.6] in Oracle Inventory'

Hi All,
i am running the runInstaller for patch set 9.2.0.8 on AIX 5L Based Systems (64-Bit)
after selecting the products.xml file and selecting the oracle home to update and then cllick Install
i get the error 'unable to find product oracle.swd.jre[1.3.1,1.6] in Oracle Inventory'
is it the issue of the version of oracle.swd.jre? can we skip the installation of this componenet?
Kindly suggest
Thanks
SK

Hi,
Please see if these documents help.
Note: 397745.1 - Error when installing Patch 2376472: "Unable to find product oracle.swd.jre "
Note: 315842.1 - 'unable to find product oracle.swd.jre' Error During Agent Upgrade from 10.1.0.3 to 10.1.0.4
Regards,
Hussein

Unable to find data in s677 table

Hi I had maintained planned data in md63 for month 1-5 of 2012 but unable to find it in table s677, help.

Hi Allen,
Referring to replies:
1. You entered values directly in MD63
2. No updates in table-S677 or PBIM.
Let me clarify few things.
SIS-S677 is custom info structure (Not a standard SIS) designed to your requirement. That means you're working on S&OP Flexible Planning module.
So as a prerequisite to this module you must maintain below mix of Config & master data:
1. Sales Info Structure i.e. S677 with update groups & rules. To capture any sales history.
2. Planning Type: It's config and Planning type defines the content and the layout of the lines in the planning table.
3. Planning hierarchy: It's a Master data and is a combination of characteristic values based on the characteristics of one information structure.
4. Planning Table: It's the place where a Planning is done.
After all above set-up, you would be able to enter in Planning Table for planning the products.
Steps for Planning/Forecasting:
1. Based on your SIS Update groups & Rules, a S677 will be updated with sales quantities with Version-00 and same will be used to calculate forecast.
2. Using forecast model setup, a forecasting can be run in Planning Table for a particular product.
3. Forecast/planning values then will be saved in Planning Table. Once you save these values & come out of Planning Table, these values will be updated in S677 with version-A00.
4. Then you need to transfer Forecast/Planning values to Demand Management from Planning Table.
5. Check if values can be seen in Demand Management (MD63). If yes, a seperate SAP standard table-PBIM, PBHI etc. will be updated. These values in MD63 are called as Planned Ind Requirement (PIR).
6. Once PIR can be seen in MD63, you can run MRP Run.
7. Once MRP finished, you can go-ahead with further processing.
This is how the complete scenario is. Check if it's okay and then revert if any further issue.
Regards,
Anup

Unable to find data in RSA3 for particular fields2lis_04_p_arbpl datasource

I am working with datasource 2lis_04_p_arbpl to construct Yield Report. I have a field GAMNG(Target Quantity) in the table AFKO, so I added it to the communication structure and activated it. I also want the field IGMNG(confirmed quantity) which is available in the table AFKO but not appearing in the pool tables of ARBPL datasource, so I have done datasource enhancement and obtained the field in the datasource. When I am checking for the data in RSA3, unable to find data(zero values) for both the fields.
Edited by: bhagav on Jan 5, 2012 1:20 PM

Hi ,
Please make sure that you are doing the extractor check in Update mode 'Full' .If the setup tables are filled then this should pick the data for the 2 newly added fields .
check and update accordingly later .
Thanks
Kamal Mehta

I have an ipad&iPhone but used the same iCloud account for both during setup.i now have ran out of iCloud storage!

I have an ipad&iPhone but used the same iCloud account for both during setup.i now have ran out of iCloud storage! If I delete the account from iPhone will I lose the apps from my ipad?
And will new account that i set up on iPhone give me 5gb storage? I assume its not as easy it sounds, it never is!
It is the camera roll on both devices that are using the storage up, and I know I can transfer the photos to a hard copy, which I will but if I can get 5gb from two separate iCloud accounts then that's the route I will take!
Many thanks in advance for your help.
Ps I had originally synced the iPad and iPhone but as far as this apple illiterate operator is aware I managed to stop them syncing a few months at lol.thanks

Welcome to the Apple Community.
I assume that the same account is required on both devices (it would be rather awkward otherwise) and that most of your space is consumed by back up.
You will need to buy more storage or back up to iTunes instead of iCloud.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.

Unable to find HP 8610 during setup

Similar Messages

Maybe you are looking for