Unable to find iviews

Hi All,
I can access BW Reports through EP as a user, i have Admin role, But i am unable to find those report in EP ivews,Pages,..etc. Please help me guyz..
Higher points will be rewarded for useful inputs.
Thanks
DST

DS T,
This is a permissions problem. You must not have the access the portal iview content . You should have a role called content administrator. If you have this role you can access them.
thanks
venkata

Similar Messages

Error "Unable to find method:key" on UM configuration iView

When i try to click on the UM configuration in System Administration --> System configuration i am getting the Error Unable to find method:key Does any one came across the same Issue. Please help ?

Server restart should help. See note 792929.

Unable to find the Overview View in the DC pcui_gp~xssutils of ESS

Hi All,
In ESS application one work set is there with name Overview.When we click on the Overview workset then the page contain 5 links.When i am clicking on Who's who link i am getting error message Page cannot be found.Where as if we will direct click on workset Who's Who then we are able to see the page.
I have imported the ESS track to NWDS.The i have synced the DC,then i have done Create project .Now i am able to see the DC xssutils in webdynpro explorer.I have expanded the Dc and check all the View present inside DC.However i am unable to find the View similar to Overview page.In Content Administration Overview iView is mentioned as WebDynpro iView.
Can anybody tell me how i will get the Overview pafe in the DC?
Is ESS standard package is not deployed to Track properly thats why i am not getting the all view inside the DC?
Thanks
Susmita

The problem is solved by basis team.

Federated Portal Network - Error-"Unexpected Error - Unable to get IView

Hi,
I have configured FPN with EP and BI, both are on same SP level.The connection and the producer registration is successful.
The producer contents can be navigated in Consumer and I can able to copy and paste the producer content in the consumer.
But when I see the preview the content it shows error "
500 Internal Server Error
BEx Web Application
Faile to process request; contact your system administrator
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Unexpected error - Unable to get IView:fpn:<consumer>/pcd:portal_content/Iviews_ID/BTMP_20110425_065001:NFd1NOBZQUPn2gQkVO65Lw%3D%3D:1:
I have checked the following thread, but I'm not able to find out solution,
Federated Portal Network - Unexpected Error - Unable to get IView
what could be the reason,
Really appriciated for your reply.
Regards,
Mahee.

Hi Shanti,
Thank for reply.
I have checked with same user in both consumer & producer portals, In that case its working fine.
If you checked with other consumer users its asking password.
For this I have tried usermapping with producer id under goto personolize -->remote iviews --> select default alias -->enter id/pwd and save for other consumer id.
How we manage for all consumer users, is there any option to mapping to all users at time.
really appriciate your inputs.
Regards,
Mahee.

Unable to find specied column in result set.

i m trying to display database values in textboxes on SelectedIndex_Changed event of list box control but i am getting "Unable to find specified column in result set" again n again..
why this is so??????

i have to create a new iview from the template of mdm iviews. then i was asked about the alias property.
thanks,
raghavendra

Unable to find Oracle quote Lines Data

Hi,
I have to find the query or any other data source which is getting the data for the Print quote report. I am unable to find out from where the data in report is being displayed.
The Flow is like...
Search for any quote.
Click on the quote link
One Drop poplist will be displayed. Select Print Quote
And click on the submit button. The PDF report generated,
Now I have to find out from where this data is coming. Can anyone help me on this.
Thanks
Anoop

Anoop,
This is a JTT page and there is no VO. If you wanna see how this report is built check out qotSCocPrint.jsp. Here data source are quoting classes. If u need any quoting related data y do u worry about source, y don't u directly hit quoting tables like aso_quote_headers_all and aso_quote_lines_all.
--Mukul

I'm using matchbook pro and I'm unable to find iPhoto after upgrading to Maverick os

I'm using matchbook pro and I'm unable to find iPhoto after upgrading to Maverick os

Open the Mac App Store application and see if iPhoto is under your "Purchases" tab.
Clinton

Error Message: "Unable to find qm_dw.htm

(I'm a low-to-moderate ability user - just upgraded from MX2004 to CS4 and just moved from PC to MacBook) I'm working through various DW CS4 tutorials and added one 'Adobe' plug-in (Lorem and More). On recent DW start-ups I have started getting the message "Unable to find qm_dw.htm in the Configuration/Floaters directory. The floater will not be shown." Does anyone know how I can resolve this? Many thanks in anticipation. John.

In case it helps, try deleting the DW cache file
http://kb2.adobe.com/cps/191/tn_19105.html#dat (step 4)

Photoshop unable to find Java script plugin

Since the last ACR update to PSCS6, I am unable to browse in Bridge or Mini Bridge and I get the error message "Could not complete the Browse in Bridge Command because Photoshop was unable to find the JavaScript plugin". When I try to open mini bridge, it will open but there is the error message: "Could not complete the command because the extension could not be loaded". I have tried a system restore and read all of the posts related to this error but no one seems to come up with an answer. I tried pasting the .dll files recommended in another post but that did not help. I tried the suggestion to run PS as an administrator but that did not work. I have searched the web, many people have this problem but very few answers, as per usual with Adobe. Using PSCS6 x64 with Windows7x64. Need help!

My mind reading abilities are a bit fuzzy today.
I can't seem to read what version of Photoshop, what computer, what OS you are using?

Unable to find Bean and AM impl for customisation of Fusion Application

Hi,
Iam navigating through this link
under Fusion App --> Navigator -->WarehouseOperation -->REceipts --> and Entering createReceipt screen via Receive Expected Shipments. I want to default the value of packing slip as how supplier got defaulted but in editable mode. For this i want to know how supplier got defaulted and in same way i want to default Packing slip number.
But iam unable to find the managed bean or AMimpl java file for doing code change.
"Copylines" is default activity and from there it is navigating to CreateReceipt.jsff, i don't find any parameter carrying the value for Supplier.
So Logic must be either in Managed Bean or in AmImpl . I need to include my logic also here. But unable to find the necessary file.
reg,
Lakshmi.

While creating a receipt, you select one or more orders belonging to a single supplier and then create one receipt against that. And that is how the supplier field gets defaulted in the Create Receipt UI.
Packing slip is also defaulted when the user receives against ASN provided it is captured at the time of creation of the ASN.
For a regular PO receipt, the user is expected to enter the packing slip by default.
Can you describe your exact requirement in detail?
The customization framework does allow the value of a field to be overwritten but using this, you will always have a predefined value or some limited logic using EL.
But we would not recommend that because when you customize the value of a field, it will discard the value that is fetched from the database.
This can potentially break the default functionality of receiving where the packing slip is defaulted from the ASN.
And another question that I have is the need for the AM details - this particular code is present in the AM and not the managed bean.
Are you planning to extend the AM that is shipped by receiving?

Type-mapping not working correctly, get "Unable to find a javaType for the xmlType" WARNING

I'm manually creating a web-services.xml file, and using the autogen ant task to
generate the codec XML/Java classes. The XML definition is provided by SAP.
The ant build.xml file:
<project name="buildWebservice" default="stubgen">
<target name="stubgen">
<clientgen ear="C:\projects\RMIS\ifrrequests\RMIS.ear"
packageName="com.aa.rmis.webservice.client"
clientJar="C:\projects\RMIS\ifrrequests\rmisws-client.jar"
autotype="False" />
</target>
<target name="all" depends="stubgen"/>
</project>
The problem is seen below in the output from Ant. Note the WARNINIG. The problem
is that the xml type cannot be mapped to the Java type.
C:\projects\RMIS\ifrrequests>ant -buildfile clientbuild.xml
Buildfile: clientbuild.xml
stubgen:
[clientgen] Generating client jar for RMIS.ear ...
[clientgen] WARNINIG: Unable to find a javaType for the xmlType:['urn:sap-com:do
cument:sap:business']:PaymentRequest.Create. Make sure that you have registered
this xml type in the type mapping
[clientgen] Using SOAPElement instead
[clientgen] Compiling 4 source files to C:\DOCUME~1\944377\LOCALS~1\Temp\rmisws-
client.jar-836624340
[clientgen] Building jar: C:\projects\RMIS\ifrrequests\rmisws-client.jar
BUILD SUCCESSFUL
Total time: 17 seconds
The Java source that has the implementation of the service methods is simply:
package com.aa.rmis.webservice;
import com.aa.rmis.ifr.request.*;
public class TestService
public TestService()
public int serviceRequest(PaymentRequestCreate request)
System.out.println("Received serviceRequest message");
return 0;
public void testStringRequest(String request)
The web-service.xml file is attached, which contains the schema for the SAP PaymentRequest.Create
object definition.
Another problem I have, which is probably related, is that the service method
that has a complex data type (non-built in data type) is not being deployed into
the WebLogic server. But the other service method that simply takes a String
parameter is.
The steps I took are:
1. Get XML from SAP Interface Repository (IFR) for PaymentRequest
2. Use ant task autogen to generate the request codec classes
3. Create the web-services.xml file by inserting the schema definition and the
mapping file created by the autogen task, and defining the operations
4. Build web-services.war file that contains all autogen compiled class files,
the web-services.xml file, and the service implementation class
5. Build the ear file that holds the web service files
6. Use the clientgen ant task to generate (included above) to generate the client
jar file that should contain the proxy for both of the service methods
Environment:
* WebLogic 7.02
* JDK 1.3.1_06
* JBuilder 9 Enterprise
* Ant 1.4
Possible causes:
* Namespace not being used correctly
* copied verbatim the mapping xml file generated by autogen into the web-services.xml
file
* xml-schema part of web-services.xml might not be set correctly
* operation definition might not be using the correct namespace
* Classpath used for ant might not be right
* Doubt this is the problem, but I'm out of other ideas
* Set by using the setWLEnv.cmd file provided by WebLogic
* Tried adding the generated classes directory for my project to the classpath,
but did not work
I've been referencing the Programming WebLogic Web Services document throughout
this entire process. I must be missing something.
Can anybody from BEA help me out with this problem?
Thanks in advance.
[web-services.xml]

Hi JD,
I spent a few cycles looking over your web-services.xml file, however I
don't have any suggestions other that one that looks like you have
already tried, at the top, in the <schema...>
targetNamespace="urn:sap-com:document:sap:business"
Making edits to these generated files can be tricky and my only
suggestion is to create a small reproducer to run by our outstanding
support team.
A quick look at our problem database shows one issue (CR095109) related
to a similar problem at deploy time that was fixed with 7.0SP3. Again,
the support folks will be able to help focus in on the issue.
Regards,
Bruce
JD wrote:
>
The first posting contains the wrong web-services.xml file. Please refer to this
one instead.
"JD" <[email protected]> wrote:
I'm manually creating a web-services.xml file, and using the autogen
ant task to
generate the codec XML/Java classes. The XML definition is provided
by SAP.
The ant build.xml file:
<project name="buildWebservice" default="stubgen">
<target name="stubgen">
<clientgen ear="C:\projects\RMIS\ifrrequests\RMIS.ear"
packageName="com.aa.rmis.webservice.client"
clientJar="C:\projects\RMIS\ifrrequests\rmisws-client.jar"
autotype="False" />
</target>
<target name="all" depends="stubgen"/>
</project>
The problem is seen below in the output from Ant. Note the WARNINIG.
The problem
is that the xml type cannot be mapped to the Java type.
C:\projects\RMIS\ifrrequests>ant -buildfile clientbuild.xml
Buildfile: clientbuild.xml
stubgen:
[clientgen] Generating client jar for RMIS.ear ...
[clientgen] WARNINIG: Unable to find a javaType for the xmlType:['urn:sap-com:do
cument:sap:business']:PaymentRequest.Create. Make sure that you have
registered
this xml type in the type mapping
[clientgen] Using SOAPElement instead
[clientgen] Compiling 4 source files to C:\DOCUME~1\944377\LOCALS~1\Temp\rmisws-
client.jar-836624340
[clientgen] Building jar: C:\projects\RMIS\ifrrequests\rmisws-client.jar
BUILD SUCCESSFUL
Total time: 17 seconds
The Java source that has the implementation of the service methods is
simply:
package com.aa.rmis.webservice;
import com.aa.rmis.ifr.request.*;
public class TestService
public TestService()
public int serviceRequest(PaymentRequestCreate request)
System.out.println("Received serviceRequest message");
return 0;
public void testStringRequest(String request)
The web-service.xml file is attached, which contains the schema for the
SAP PaymentRequest.Create
object definition.
Another problem I have, which is probably related, is that the service
method
that has a complex data type (non-built in data type) is not being deployed
into
the WebLogic server. But the other service method that simply takes
a String
parameter is.
The steps I took are:
1. Get XML from SAP Interface Repository (IFR) for PaymentRequest
2. Use ant task autogen to generate the request codec classes
3. Create the web-services.xml file by inserting the schema definition
and the
mapping file created by the autogen task, and defining the operations
4. Build web-services.war file that contains all autogen compiled class
files,
the web-services.xml file, and the service implementation class
5. Build the ear file that holds the web service files
6. Use the clientgen ant task to generate (included above) to generate
the client
jar file that should contain the proxy for both of the service methods
Environment:
* WebLogic 7.02
* JDK 1.3.1_06
* JBuilder 9 Enterprise
* Ant 1.4
Possible causes:
* Namespace not being used correctly
* copied verbatim the mapping xml file generated by autogen into
the web-services.xml
file
* xml-schema part of web-services.xml might not be set correctly
* operation definition might not be using the correct namespace
* Classpath used for ant might not be right
* Doubt this is the problem, but I'm out of other ideas
* Set by using the setWLEnv.cmd file provided by WebLogic
* Tried adding the generated classes directory for my project to
the classpath,
but did not work
I've been referencing the Programming WebLogic Web Services document
throughout
this entire process. I must be missing something.
Can anybody from BEA help me out with this problem?
Thanks in advance.
Name: web-services.xml
web-services.xml Type: ACT Project (text/xml)
Encoding: base64

Hi, I am using my icloud on my iphone but am unable to find it on my mac book pro. It's not under my system preferences like it shows under the setup. Can I download it again? Or something. I just need to backup some files on my computer and am unable.

Hi, I am using my icloud on my iphone but am unable to find it on my mac book pro. It's not under my system preferences like it shows under the setup. Can I download it again? Or something. I just need to backup some files on my computer and am unable.

The minimum requirement for iCloud is Lion 10.7.5 (Mavericks preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is now non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
The requirements for Mountain Lion and Mavericks are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?

My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?

Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective.

Problem with Java keystore and certificates (unable to find valid cert path

Our program is made so that when a certificate is not signed by a trusted Certification Authority, it will ask the user if he/her wishes to trust the certificate or not. If they decide to trust the certificate, it will accept the self signed certificate and import it into the keystore and then use that certificate to log the user in. This works fine. It will import the certificate into the keystore and use the specified ip address to establish a connection with the LDAP server (Active Directory in our case) and authenticate properly. However, the problem arises when we then try and connect to a different ip address (without restarting tomcat, if we restart tomcat, it works fine...). It imports the certificate into the keystore fine, but always gives the exception
"Root exception is javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target"
and does not authenticate with our LDAP server (which is Active Directory). The problem seems to be that it is no longer looking at the System.setProperty("javax.net.ssl.trustStore", myTrustStore);
I have tried multiple times to just reset this property and try and "force" it to read from my specified trust file when this error happens. I have also imported the certificates directly into the <java_home>/jre/lib/security/cacerts and <java_home>/jre/lib/security/jssecacerts directories as the java documentation says that it will look at those directories first to see if it can find a trusted certificate. However, this does not work either. The only way that I can get this to work is by restarting tomcat all together.
If both of the certificates are already in the keystore before tomcat is started up, everything will work perfect. Again, the only problem is after first connecting to an IP address using TLS and importing the certificate, and then trying to connect to another IP address with a different certificate and import it into the keystore.
One of the interesting features of this is that after the second IP address has failed, I can change the IP address back to the first one that authenticated successfully and authenticate successfully again (ie
I use ip 1.1.1.1, import self signed certificate, authenticates successfully
login with ip 2.2.2.2 import self signed certificate, FAILS
login again with 1.1.1.1 (doesn't import certificate because it is already in keystore) successfully authenticates
Also, I am using java 1.5.0_03.
Any help is greatly appreciated as I've been trying to figure this out for over a week now.
Thanks

Please don't post in threads that are long dead and don't hijack other threads. When you have a question, start your own topic. Feel free to provide a link to an old post that may be relevant to your problem.
I'm locking this thread now.

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network

Which version of OSX and what email provider are you using.

Unable to find iviews

Similar Messages

Maybe you are looking for