Unable to find J2EE librarie on the SDM for removal

Hello,
I am trying to remove two J2EE libraries from the WAS.
I can see them on the WAS, I can see them on the ext folder of the server but I can't see them on the SDM. I went over each and every entry at the undeployment tab of the SDM yet I can't find it. I cannot see it at the applications section of the Deploy Service of the WAS. I tried manually deleting their folders from the ext folder yet they are still exist on the WAS. So how do I remove them?

A similar problem is described here http://serverfault.com/questions/490236/task-scheduler-just-decides-it-doesnt-want-to-run-a-task-anymore

Similar Messages

Nmew32rg.dll - Unable to find EM location in the registry : RegQueryValue f

Hi All,
I am getting below error while installing companions "10203_vista_w2k8_x86_production_companion.zip" (32-bit) (HTTP server) on Windows 2008 sp2 64-bit machine.
.....CALL INTO REGISTRY.....
DLL TO LOAD = \nmew32rg.dll
DLL LOADED
Unable to find EM location in the registry : RegQueryValue failed
REGISTRY VALUE = nullThis happens only if I do installation from command line by using response file. From OUI interactive installer it is being installed properly.
ORACLE_HOME (db) = C:\oracle\Database\oracleDB\
ORACLE_HOME=C:\oracle\Database\oracleDB\OHS
Companion disk: C:\oracle\Oracle10g\companion
Modified response file: C:\oracle\Oracle10g\companion\oracle.companionCD.midtier.rsp
Command to install:
"C:\oracle\Oracle10g\companion\install\oui.exe" -silent -nowait -force -waitforcompletion FROM_LOCATION="C:\oracle\Oracle10g\companion\stage\products.xml" ORACLE_HOME=C:\oracle\Database\oracleDB\OHS ORACLE_HOME_NAME=oracle_10gOHSHome -responseFile C:\oracle\Oracle10g\companion\oracle.companionCD.midtier.rspThe machine already has "10204_vista_w2k8_x64_production_db.zip" database installed.
Can you please suggest what additional things I need to take care to install companions using response file?

Thanks Werner for reply !! I was really looking for any reply of my thread.
I think it is useless to mention because something I did which is not supported,
1. I installed "10204_vista_w2k8_x64_production_db.zip" database on w2k8 sp2 (64-bit) machine which is supported DB version for w2k8 environment.
2. Companions are available for w2k8 64 bit but HTTP server is not there. It is only available in "10203_vista_w2k8_x86_production_companion.zip". This is a x86 (32-bit) setup and while doing interactive mode installation it is passing all prereq checks on x64 and not showing me any information to not to use this setup for x64. Also, it works fine after installation but not working in command-line installation.
One last question,
Will Oracle provide support on fixing this issue if I contact them or raise SR ?

Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.

Hi, We recently started getting these errors a couple times a day. There are 12 of them in total. We also have exactly 12 subscriptions. Does this indicate some db issue causing all of these
to fail?
Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.
The following error(s) were encountered:
Exception Message: ExecuteScalar requires an open and available Connection. The connection's current state is closed.
One or more workflows were affected by this.
Workflow name: Subscription8b108a3e_4e3d_4fd0_b67e_cbfc21cd10b8
Instance name: Alert Notification Subscription Server
Instance ID: {E07E3FAB-53BC-BC14-1634-5A6E949F9230}
Management group: A Company Management Group
Thanks Lance

Hi,
Do you have hotfixes applied?
http://blogs.technet.com/kevinholman/archive/2009/01/27/which-hotfixes-should-i-apply.aspx
Also, I found a relevant thread for your reference.
Alert subscription data source module encountered errors while running</u1:p>
http://social.technet.microsoft.com/Forums/systemcenter/en-US/50557249-7f97-4b67-9729-f7088202385b/alert-subscription-data-source-module-encountered-errors-while-running?forum=operationsmanagergeneral</u1:p>
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

The drop down menus in Photoshop CC 2014 are too small to read without using the magnifier. They are OK in Photoshop CC. I have been unable to find anyplace to adjust the font size. I have Windows 7 Pro. Looking at the Photoshop version history, it lo

The drop down menus in Photoshop CC 2014 are too small to read without using the magnifier. They are OK in Photoshop CC. I have been unable to find anyplace to adjust the font size. I have Windows 7 Pro. Looking at the Photoshop version history, it looks like this problem comes and goes as Photoshop is updated. It should be an easy fix.

Try the Photoshop CC 2014 Preference experimental section 2X UI option

Alert subscription data source module was unable to find alerts that match the subscription because of database errors.

We have been seeing this error in the Operations Manager Event Log for quite a while.
Alert subscription data source module was unable to find alerts that match the subscription because of database errors.
The following error(s) were encountered:
Exception Message: ExecuteScalar requires an open and available Connection. The connection's current state is closed.
One or more workflows were affected by this.
Workflow name: MMEA_1348391424
Instance name: aaa.bbb.com
Instance ID: {88AED57C-5627-0C0B-E5C1-A9176A7E64CD}
Management group: SCOMr2
I haven't been able to spot any network outage on the management servers, or the database servers to indicate a problem. It usually happens at night, and when I look at the health explorer, the entity is healthy.
Please would someone help me in finding the root cause of this issue and what can be done to avoid it.
There were no backups running when this alert was generated. As far as I'm aware, everything was idle.
I would appreciate any help.
Karan

Exception Message: ExecuteScalar requires an open and available Connection. The connection's current state is closed.
Based on the Error it seems the below for me
1. Either SCOM is unable to connect to the operationsmanager / operationsmanagerDW for its transactions on subscriptions
2. Or the SMTP server which your SCOM is using to relay emails has closed the connection.
So my suggestion would be you check the above for issues.
Gautam.75801
There were no network hiccups that I can see. Minimal disk activity. I've looked for any signs of database load, and haven't seen anything that jumps out.
Emails were going through just fine. These alerts get emailed to me, and if the SMTP server is 'closed' SCOM is usually quite sensitive and alerts about that too. I've seen it.
KB

Mail was unable to find your reply to the message ".....

I keep getting this message when I try to look for a reply from within mail by clicking on the reply arrow in the inbox that shows I've replied to the message:
"Mail was unable to find your reply to the message "...." You may have deleted the message."
https://skitch.com/jasondebruler/rshsf/mail
This only happens when looking for sent items from my Exchange account. The feature works correctly on all of my gmail accounts.
I have verified in the preferences that this account is set up (box is checked) to properly "Store sent messages on the server".
Any insight would be appreciated. Thanks!

Cheers for that. Yes they match, the sent folders are the same both locally and on the web interface. They both updating almost instantly when i send something.
The problem is when replying, although both sent folder views contain the sent item, the little reply arrow cannot link to replied sent item. I have attached an image of the message:
http://gallery.me.com/martinwhiting#100231/b&bgcolor=black

TS3276 Apple Mail cannot find replies or forwarded emails -- the little arrows on the left of the list of emails: "Mail was unable to find your reply to the message '[subject of message]'. You may have deleted the message." I did not delete the message.

Apple Mail cannot find replies or forwarded emails -- the little arrows on the left of the list of emails: "Mail was unable to find your reply to the message '[subject of message]'. You may have deleted the message." I did not delete the message. Bug in the program, or am I missing something?

Of course they're in my Sent folder. Then why can't Apple Mail find them?

TS3276 Mail was unable to find your reply to the message. You may have deleted the message.

Mail was unable to find your reply to the message “subject”. You may have deleted the message.
Using IMAP account. Just started happening last week. Any suggestions?

NO suggestions for fixing it Frank, but I'm having the same exact problem. I have taken to copying all messages before sending them, and sending them twice. What a pain in the ... um, neck!

"Mail was unable to find your reply to the message... You may have deleted the message."

I'm experiencing some kind of corruption in Mail's ability to connect replies to messages.
The error I'm starting to get says this:
"Mail was unable to find your reply to the message... You may have deleted the message."
And these emails are no longer threading like conversations and when you click on the little "read reply" arrow icon it can't find the reply.
What could be up here please?!?!?
Thanks!
David

CT,
Thanks SO much for a reply.
Yes it survives a restart, but i had no idea about this "Rebuild" option.
Trying that now!
Cheers!

Unable to find a volume that is suitable for staging the boot image.

I have an SCCM 2012 OSD task sequence that is failing when it tries to stage the boot image to the drive before rebooting. The log file shows:
Staging boot image CET00028 TSManager 6/5/2014 3:57:58 PM 1492 (0x05D4)
Mounting \Device\HarddiskVolume6 at Z: TSManager 6/5/2014 3:57:58 PM 1492 (0x05D4)
Unmounting volume Z:\ TSManager 6/5/2014 3:57:58 PM 1492 (0x05D4)
Checking to see if the data path is on a bootable volume TSManager 6/5/2014 3:57:59 PM 1492 (0x05D4)
Volume C:\ because it is not suitable as the system partition TSManager 6/5/2014 3:57:59 PM 1492 (0x05D4)
Searching for a volume to stage the boot image TSManager 6/5/2014 3:57:59 PM 1492 (0x05D4)
Volume S:\ is not NTFS TSManager 6/5/2014 3:57:59 PM 1492 (0x05D4)
Volume C:\ because it is not suitable as the system partition TSManager 6/5/2014 3:57:59 PM 1492 (0x05D4)
Volume R:\ is not on a fixed disk TSManager 6/5/2014 3:57:59 PM 1492 (0x05D4)
Volume X:\ is not on a fixed disk TSManager 6/5/2014 3:57:59 PM 1492 (0x05D4)
BootImage::FindBootableVolume( NULL, sPath), HRESULT=80070490 (e:\qfe\nts\sms\framework\tscore\bootimage.cpp,1045) TSManager 6/5/2014 3:57:59 PM 1492 (0x05D4)
Unable to find a volume that is suitable for staging the boot image.
Element not found. (Error: 80070490; Source: Windows) TSManager 6/5/2014 3:57:59 PM 1492 (0x05D4)
I've seen others get this error code and fix it by injecting the correct storage drivers. In my case I believe I have the correct storage drivers. In a separate MDT 2013/WDS environment I can deploy
8.1 to the same machine using the same drivers with no problems so my drivers appear to allow proper access to the drive. When I check the volumes with DiskPart they all appear to be fine. The C:\ volume has the _SMSTaskSequence folder on it with
files so it is certainly writable. The system is set for UEFI mode. Of course if I change it to Legacy mode this problem doesn't happen. I have also integrated MDT 2013 into SCCM console and both an SCCM task sequend and an MDT task sequence
do the same thing. Any ideas?
Thanks,

From the error, the C could not be the staging location because it is system partition. You need to format a fixed drive to NTFS partition and try again.
Juke Chou
TechNet Community Support

I cannot find how to change the language for labels in a quiz

I cannot find how to change the language for labels in a quiz

You have to be aware that this will only change labels if you edit before adding quiz slides: Preferences, Quiz, Default Labels. You will have to edit the labels, choosing another language will not change them automatically.

Where can I find a copy of the eula for Adobe Acrobat XI?

Where can I find a copy of the eula for Adobe Acrobat XI?
The eula does not come up for inspection when you install the software.

http://www.adobe.com/legal/licenses-terms.html

Why can't I find any games in the Store for Ipod Classic?

Why can't I find any games in the Store for the Ipod Classic?

Hard to say, as you provide almost no information.. I would guess that you are looking in the wrong place.

HT1923 I cannot uninstall apple mobile device support. I am following the instructions for removing and reinstalling itunes but now stuck. Please help.

I am following the instructions for removing and reinstalling itunes because I had a "msvcr80.dll missing from your computer" error. I have uninstalled itunes and apple software update but the next one in order "apple mobile device support" will not uninstall. According to the instructions, that one has to be removed before I can do the rest. Would love any help I can get.

Hello and thanks so much for your quick reply. I am at a standstill, because I have done those things already and it has not worked. The repair install procedure seemed to take place quickly, but the same thing happened again when I tried to uninstall it the program after that.... It seems to proceed, then the progress bar goes backward, and there it still is!
When I downloaded the Microsoft Fixit program and asked it to uninstall the Apple Mobile device Support, it started but then got stuck and I had to shut my computer off, as it froze everything up!
I'm hoping you can help..... This seems to be a problem with the new version, and it's frustrating, because I can't use Itunes on my computer at all till we find a solution.
Perhaps if I try to restore my computer to before the Itunes 11.1.4 uodate?
Thanks so much for your help,
Shirley 261

My daughter wants to remove herself from our plan and use a different cell provider. However, our contract is not yet up, what is the penalty for removing her early?

My daughter wants to remove herself from our plan and use a different cell provider. However, our contract is not yet up, what is the penalty for removing her early?

For contacts started before November 14, 2014, the ETF is $350 minus $10 per month of the contract term completed for smartphones. For other ddv6,it is $175 minus $5 per month of the contract term completed. You will need to call customer service at 1-800-922-0204 or *611 to find out the ETF amount for contracts started on and after November 14, 2014.

Unable to find J2EE librarie on the SDM for removal

Similar Messages

Maybe you are looking for